Scribd
Upload
9 views3 pages

CPG 100kva

Uploaded by

fhardi suganda

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

CPG 100kva

Uploaded by

fhardi suganda
9 views3 pages

Original Title

CPG 100kVa

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
9 views3 pages

CPG 100kva

Uploaded by

fhardi suganda

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 3

Generator set data sheet

Model: C110D5I
Frequency: 50
Fuel type: Diesel

Spec sheet: S-6612


Noise datasheet (enclosed): MSP-4146

Standby Prime
Fuel consumption kVA (kW) kVA (kW)
Ratings 110 (88) 100 (80)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full
gph 1.9 3.4 5.12 7.18 1.79 3.2 4.7 6.5
L/hr 7.4 12.9 19.4 27.2 6.8 12.0 18.0 24.7

Engine Standby rating Prime rating


Engine manufacturer Cummins Inc.
Engine model 6BTA5.9 G5
Configuration Inline 6-Cylinder diesel
Aspiration Turbocharged and after-cooled
Gross engine power output, kWm 102 93
BMEP at set rated load, kPa 1386 1265
Bore, mm 102
Stroke, mm 120
Rated speed, rpm 1500
Piston speed, m/s 6
Compression ratio 17.6:1
Lube oil capacity, L 16.4
Overspeed limit, rpm 1800
Regenerative power, kW 8
Governor type Electronic
Starting voltage 12 Volts DC

Fuel flow
Maximum fuel flow, L/hr 45
Maximum fuel inlet restriction, mm Hg 8
Maximum fuel inlet temperature, (°C) 71

power.cummins.com
©2023 Cummins Inc. | D-6624 (01/23)
Air Standby rating Prime rating
Combustion air, m3/min 7.86 7.2
Maximum air cleaner restriction, kPa 6

Exhaust
Exhaust gas flow at set rated load, m3/min 21.4 19.5
Exhaust gas temperature, °C 540 533
Maximum exhaust back pressure, kPa 10.5

Standard set-mounted radiator cooling


Ambient design, °C @ 12.7mm H2O 54
Fan load, kWm 5.60992
Coolant capacity (with radiator), L 19.75
Cooling system air flow, m3/sec @ 12.7mm H2O 3.44
Total heat rejection, BTU/min 9259 8419
Maximum cooling air flow static restriction, mm H2O 12.7

Weights* Open Enclosed


Unit dry weight, kgs 1097 1478
Unit wet weight, kgs 1113 1494
Unit wet weight with fuel, kgs 1405 1786
* Weights represent a set with standard features. See outline drawing for weights of other configurations.

Dimensions Length Width Height


Standard open set dimensions 2268 1276 1462.7
Enclosed set standard dimensions 3157 1276 1753

Genset outline
Open set

Enclosed set

Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.

power.cummins.com
©2023 Cummins Inc. | D-6624 (01/23)
Alternator data
Connection1 Temp rise ºC Duty2 Alternator Voltage
Wye, 3 phase 163/125 S/P S3L1D-C4 380-440V

Ratings definitions

Emergency Standby Limited-Time running Prime Power (PRP): Base load (Continuous)
Power (ESP): Power (LTP): Power (COP):
Applicable for supplying Applicable for supplying Applicable for supplying Applicable for supplying
power continuously to power to a constant power to varying electrical power continuously to a
varying electrical loads for electrical load for limited load for unlimited hours. constant load up to the full
the duration of power hours. Limited-Time Prime Power (PRP) is in output rating for unlimited
interruption of a reliable Running Power (LTP) is in accordance with ISO 8528. hours. No sustained
utility source. Emergency accordance with ISO 8528. Ten percent overload overload capability is
Standby Power (ESP) is in capability is available in available for this rating.
accordance with ISO 8528 accordance with ISO 3046- Consult authorized
and ISO 3046-1, obtained 1. distributor for rating.
and corrected in accordance (Equivalent to Continuous
with ISO 15550). Power in accordance with
ISO 8528 and ISO 3046-1,
obtained and corrected in
accordance with ISO
15550).
This rating is not applicable
to all generator set models.

Formulas for calculating full load currents:

Three phase output Single phase output

kW x 1000 kW x Single Phase Factor x 1000


Voltage x 1.73 x 0.8 Voltage

For more information contact your local Cummins distributor


or visit power.cummins.com

©2023 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
D-6624 (01/23)

You might also like