Lenovo DM Storage Series

Lenovo ThinkSystem DM5000F Unified and DM5000F
SAN Flash Storage Array

Product Guide
Lenovo ThinkSystem DM5000F is an all-flash storage system, available as either unified or SAN, that is
designed to provide performance, simplicity, capacity, security, and high availability for medium enterprises.
Powered by the ONTAP software, ThinkSystem DM5000F delivers enterprise-class storage management
capabilities with a wide choice of host connectivity options and enhanced data management features. The
ThinkSystem DM5000F is a perfect fit for a wide range of enterprise workloads, including big data and
analytics, artificial intelligence, engineering and design, enterprise applications, and other storage I/O-
intensive applications.
ThinkSystem DM5000F models are 2U rack-mount controller enclosures that include two controllers, 64 GB
RAM and 8 GB battery-backed NVRAM (32 GB RAM and 4 GB NVRAM per controller), and 24 SFF hot-
swap drive bays (2U24 form factor). Controllers provide universal 1/10 GbE NAS/iSCSI or 8/16 Gb Fibre
Channel (FC) ports, or 1/10 GbE RJ-45 ports for host connectivity.
A single ThinkSystem DM5000F Storage Array scales up to 144 solid-state drives (SSDs) with the
attachment of Lenovo ThinkSystem DM240S 2U24 SFF Expansion Enclosures.
Figure 1. Lenovo ThinkSystem DM5000F

Up to 12 DM5000F Storage Arrays can be combined into a clustered system in a NAS environment, or up to
6 DM5000F Storage Arrays can be combined into a clustered system in a SAN environment.
Did you know?

A single ThinkSystem DM5000F scales up to 2.2 PB of raw storage capacity. A cluster of the DM5000F
storage systems scales up to 26.5 PB for NAS or up to 13.2 PB for SAN environments.
The ThinkSystem DM5000F offers unified file and block storage connectivity with support for 1 GbE or
10 GbE NAS and iSCSI, and 8 Gb or 16 Gb Fibre Channel protocols at the same time.
Click here to check for updates

Lenovo ThinkSystem DM5000F Unified and DM5000F SAN Flash Storage Array 1
Key features
The ThinkSystem DM5000F offers the following key features and benefits:
Available as a Unified storage platform - allowing NAS, SAN, and Object workloads or as a SAN
storage platform that serving only SAN workloads.
Both platform options, Unified and SAN are available with either the Fundamentals or Premium
software feature offerings which provide feature flexibility.
All-flash array capabilities to meet the demand for higher speed storage and provide higher IOPs and
bandwidth with lower power usage and total cost of ownership than hybrid or HDD-based solutions.
All-flash storage with dual active/active controller configurations for high availability and performance.
Improved performance and data protection with RAID-DP and RAID-TEC, as well as support for
traditional RAID 4.
Flexible host connectivity to match diverse client needs with support for unified NAS and SAN
storage protocols, including 1/10 GbE NAS and iSCSI, and 8/16 Gb Fibre Channel connectivity.
12 Gb SAS drive-side connectivity with multipathing with up to 24x 2.5-inch small form factor (SFF)
drives in the 2U24 SFF enclosures.
Scalability to up to 144 SFF drives with the attachment of the ThinkSystem DM240S 2U24
SFF expansion enclosures to satisfy growing needs for storage capacity and performance.
A rich set of storage management functions available, including snapshots, volume copy, quality of
service, thin provisioning, compression, deduplication, encryption, disk-based backup, application-
and virtual machine-aware backup, quick data recovery, clustering, synchronous replication, and
asynchronous replication.
Optional licensed functions, including WORM (write once, read many) data protection (SnapLock)
and object storage tiering (FabricPool).
Scale-out clustering of up to 12 ThinkSystem DM Series storage systems for NAS connectivity or up
to six DM Series storage systems for SAN connectivity.
Intuitive, web-based GUI for easy system setup and management.
Lenovo XClarity support for centralized systems management of Lenovo x86 servers, switches,
and storage, which provides automated agent-less discovery, inventory, monitoring, and additional
platform-specific functions across multiple systems.
Designed for 99.9999% availability with redundant hot-swap components, including controllers and
I/O modules, power supplies, and non-disruptive firmware upgrades.
Certified Enterprise Storage for SAP HANA Tailored Data center Integration (TDI).
Certified storage for Oracle VM.
Certified storage for Citrix XenServer: http://hcl.xenserver.org/storage/910/Lenovo_DM_Series.
The ThinkSystem DM5000F supports the 2.5-inch 960 GB, 3.84 TB, 7.68 TB, and 15.36 TB capacity-
optimized SAS SSDs. All drives are dual-port and hot-swappable.
The ThinkSystem DM5000F supports attachment of up to five ThinkSystem DM240S 2U24 SFF expansion
enclosures. More drives and expansion enclosures are designed to be dynamically added with virtually no
downtime, which helps to quickly and seamlessly respond to ever-growing capacity demands.
The ThinkSystem DM5000F offers high levels of system and data availability with the following features:
Dual-active controllers (high availability pair) with automatic load balancing and failover
Mirrored, battery-backed controller NVRAM
Dual-port SAS SSDs with automatic drive failure detection and rebuild
Redundant, hot-swappable and customer replaceable hardware components, including SFP+
transceivers, controllers, I/O modules, power supplies, and drives
Automated failover for the data path between the host and the drives with multipathing
Non-disruptive controller and drive firmware upgrades
Scale-out clustering
Components and connectors

The following figure shows the front of the ThinkSystem DM5000F or DM240S 2U SFF enclosure.
Figure 2. ThinkSystem DM5000F or DM240S enclosure front view

The front of the ThinkSystem DM5000F or DM240S 2U SFF enclosure includes the following components:
24 SFF hot-swap drive bays.
Enclosure status LEDs.
Enclosure ID LED.
The following figure shows the rear of the ThinkSystem DM5000F 2U controller enclosure with universal
SFP+ host ports.
Figure 3. ThinkSystem DM5000F 2U controller enclosure rear view: Universal SFP+ host ports
The following figure shows the rear of the ThinkSystem DM5000F 2U controller enclosure with 10GBASE-T
host ports.
Figure 4. ThinkSystem DM5000F 2U controller enclosure rear view: 10GBASE-T host ports
The rear of the ThinkSystem DM5000F 2U controller enclosure includes the following components:
Two redundant hot-swap controllers, each with the following ports:
Two SFP+ interconnect ports for direct-attach HA pair or switched cluster connections.
Four SFP+ host ports for 1/10 Gb GbE or 4/8/16 Gb FC connectivity, or four 1/10 GbE RJ-45
ports.
Two 12 Gb SAS x4 ports (Mini-SAS HD SFF-8644) for connections to the expansion
enclosures.
One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.
Two serial console ports (RJ-45 and Micro-USB) for another means to configure the system.
One USB Type A port (for ONTAP software installation or booting)
Two redundant hot-swap 913 W (100 - 240 V) AC power supplies (IEC 320-C14 power connector)
with integrated cooling fans.
Controller status LEDs.
The following figure shows the rear of the ThinkSystem DM240S 2U expansion enclosure.
Figure 5. ThinkSystem DM240S 2U expansion enclosure rear view

The rear of the ThinkSystem DM240S 2U expansion enclosure includes the following components:
Two redundant hot-swap I/O Modules; each I/O Module provides four 12 Gb SAS x4 expansion ports
(Mini-SAS HD SFF-8644) for connections to the controller enclosures and for connecting the
expansion enclosures between each other.
Two redundant hot-swap 913 W (100 - 240 V) AC power supplies (IEC 320-C14 power connector)
with integrated cooling fans.
I/O Module status LEDs.
System specifications
The following table lists the ThinkSystem DM5000F storage system specifications.
Note: The supported hardware options, software features, and interoperability listed in this product guide
are based on the ONTAP software version 9.7. For details about specific software releases that introduced
support for certain hardware options and software features, refer to the Release notes of the particular
software release for the ThinkSystem DM5000F that can be found at:
http://datacentersupport.lenovo.com
Table 1. ThinkSystem DM5000F system specifications

Attribute Specification
Form factor DM5000F controller enclosure (machine types 7Y41, 7D7W): 2U rack mount.
DM240S 2U24 SFF expansion enclosure (machine types 7Y58, 7D7Y): 2U rack mount.
Controller Dual active-active controller configuration (HA pair). Up to 6 HA pairs can be combined into a
configuration single SAN cluster, or up to 12 HA pairs can be combined into a single NAS cluster.
HA pair/cluster 4x 10 GbE SFP+ ports (DAC cables or SW fiber optics [LC]) (2 ports per controller).
interconnect ports
RAID levels RAID-4, RAID-DP, RAID-TEC.
Controller 64 GB RAM per system (32 GB per controller). 8 GB battery-backed NVRAM per system (4 GB
memory per controller) mirrored between the controllers.
Drive bays Up to 144 SFF hot-swap drive bays (1x 2U24 controller enclosure + up to 5x 2U24 SFF
expansion enclosures).
Note: The Fundamentals software bundles only support up to 84 drives.
Drive technology 12 Gb SAS SSDs.
Drive expansion 2x 12 Gb SAS x4 (Mini-SAS HD SFF-8644) expansion ports on each of two controllers
connectivity in the controller enclosure for the attachment of the expansion enclosures.
4x 12 Gb SAS x4 (Mini-SAS HD SFF-8644) expansion ports on each of two I/O
modules in the expansion enclosure for the attachment to the controller enclosure and
daisy chaining of the expansion enclosures.
Drives 960 GB, 3.84 TB, 7.68 TB, and 15.36 TB SAS SSDs (1 DWD).
Storage capacity Up to 2.160PB
Storage protocols NAS (File access): NFS and CIFS/SMB.
SAN (Block access): iSCSI and FC.
Host connectivity Base ports (per controller enclosure):
8x 1 GbE (RJ-45 UTP)/10 GbE (DAC cable or SW fiber optic cable, LC) or 4/8/16 Gb
FC (SW fiber optic cable, LC) SFP+ host ports (4 ports per controller); or
8x 1/10 GbE RJ-45 UTP host ports (4 ports per controller).
Note: ONTAP does not support host direct attach for FC protocol.
Host operating Microsoft Windows Server 2012 R2, 2016, and 2019; Red Hat Enterprise Linux (RHEL) 6, 7,
systems and 8; SUSE Linux Enterprise Server (SLES) 11, 12, and 15; VMware vSphere 6.0, 6.5, 6.7,
and 7.0.
Performance* Up to 148 000 random read IOPS (8 KB blocks).
Configuration Maximum raw storage capacity: 2.2 PB
maximums** Maximum aggregate size: 400 TB
Maximum number of FlexVol volumes per controller: 1000
Maximum volume size: 100 TB (The maximum size will be increased up to 300TB in
ONTAP 9.12.1P2 and later.)
Maximum number of LUNs per controller: 8192
Maximum number of LUNs per FlexVol volume: 512
Maximum LUN size: 16 TB (The maximum size will be increased up to 128TB in
ONTAP 9.12.1P2 and later.)
Maximum number of drives in a RAID group (data + parity drives):
RAID 4: 14 (13 + 1 SAS SSDs)
RAID-DP: 28 (26 + 2 SAS SSDs)
RAID-TEC: 29 (26 + 3 SAS SSDs)
Maximum number of initiators per controller: 2048
Maximum number of snapshots per FlexVol volume: 1023
Cooling Redundant cooling with the fans that are built into power supplies (DM5000F and DM240S
2U24 SFF enclosures).
Power supply Two redundant hot-swap 913 W (100 - 240 V) (DM5000F and DM240S 2U24 enclosures)
Platinum AC power supplies.
Hot-swap parts Controllers, I/O modules, drives, power supplies, and SFP+ transceivers and DAC cables.
Management 1x 1 GbE port (UTP, RJ-45) per controller for out-of-band management.
ports 2x Serial console ports (RJ-45 and Micro-USB) for system configuration.
Management ThinkSystem Storage Manager web-based GUI; SSH CLI; Serial console CLI; SNMP, email,
interfaces and syslog alerts; optional Lenovo XClarity.
Security features Secure Socket Layer (SSL), Secure Shell (SSH), user level security, role-based access control
(RBAC), LDAP authentication.
Warranty and 1-year or 3-year, customer-replaceable unit and onsite limited warranty with selectable service
support levels: 9x5 service coverage next business day (NBD) onsite response (Foundation) or 24x7
service coverage with 4-hour onsite response (Essential). Premier Support is also
available. Software support is included in the Foundation or Essential Service for the duration of
the warranty period.
Dimensions Controller enclosure:
Height: 85 mm (3.4 in.)
Width: 447 mm (17.6 in.)
Depth: 483 mm (19.0 in.)
2U24 SFF expansion enclosure:

Width: 449 mm (17.7 in.)
Depth: 484 mm (19.1 in.)
Weight Controller enclosure (fully configured): 27.6 kg (60.8 lb)
2U24 SFF expansion enclosure (fully configured): 24.4 kg (53.8 lb)
* Estimated performance based on internal measurements.
** For a detailed list of configuration limits and restrictions for a specific version of the software, refer to the
Lenovo Support website:
http://datacentersupport.lenovo.com
Controller enclosures
Preconfigured and factory-integrated models of the ThinkSystem DM5000F Unified Flash Storage Array are
configured by using the Lenovo Data Center Solution Configurator (DCSC):
http://dcsc.lenovo.com
The following table lists the CTO base model for the ThinkSystem DM5000F.
Table 2. ThinkSystem DM5000F CTO base models

Machine Feature
Description Type/Model code
Lenovo ThinkSystem DM5000F (3-year warranty) 7D7WCTO1WW BEY7
7D7WCTORWW*
* CTORWW is for customers in Russia; CTO1WW is for all other markets
Configuration note:
Two DM3000/DM5000 SFP+ controllers (feature code B39F) must be selected during the
configuration process.
The models of the ThinkSystem DM5000F ship with the following items:
One chassis with the following components:
Two controllers
Two power supplies
Rack Mount Kit
2 m USB Cable (USB Type A to Micro-USB)
Electronic Publications Flyer
Two customer-configured power cables
Controllers
The ThinkSystem DM5000F controller enclosures ship with two DM3000/DM5000 10GBASE-T or SFP+
controllers. A controller provides interfaces for host connectivity, management, and internal drives, and it
runs ONTAP storage management software. Each DM5000F controller enclosure provides 64 GB RAM and
8 GB battery-backed NVRAM (32 GB RAM and 4 GB NVRAM per controller).
The ThinkSystem DM5000F controller enclosures ship with four interconnect 10 GbE SFP+ ports (two ports
per controller) to cable a directly-connected dual-controller HA pair or for switched cluster interconnect with
multiple dual-controller HA pairs. Up to six HA pairs can be combined into a single SAN cluster or up to 12
HA pairs can be combined into a single NAS cluster.
The ThinkSystem DM5000H controller enclosures ship with one of the following interface types:
8x Universal SFP+ ports (four ports per controller) for 1/10 GbE NAS / iSCSI or 4/8/16 Gb FC host
connectivity.
8x 1/10 GbE RJ-45 ports (four ports per controller) for 1/10 GbE NAS / iSCSI host connectivity.
Each DM5000F controller enclosure also provides four integrated 12 Gb SAS x4 expansion ports (Mini-SAS
HD SFF-8644 connectors) (two ports per controller) for the attachment of the ThinkSystem DM Series
expansion enclosures.
Configuration notes:
A pair of the universal SFP+ base ports (e0c/0c and e0d/0d or e0e/0e and e0f/0f) in the system must
have the same connectivity type (either Ethernet or Fibre Channel, but not both types) and the same
type of physical connections; different pairs might have different types of connectivity.
Two controllers are required for selection. Both controllers must be of the same type (either
16 Gb FC / 10 GbE or 10GBASE-T, but not both types), and they must have matching configurations
of the base ports (type and physical connections).
The following table lists the controllers for the DM5000F Storage Array and supported connectivity options.
Table 3. DM5000F controllers and connectivity options

Maximum
quantity per
Feature controller
Description Part number code enclosure
Controllers
Lenovo ThinkSystem DM3000/DM5000 Controller, 10GBASE-T None* B39G 2
Lenovo ThinkSystem DM3000/DM5000 Controller, 16Gb FC / 10GbE None* B39F 2
SFP+ options for base ports
1Gb RJ-45 iSCSI SFP+ Module 1 pack 4XF7A14917 B4K7 8
8Gb Fibre Channel SFP+ Module 1 pack 4XF7A14918 B4K8 8
16Gb Fibre Channel SFP+ Module 1 pack 4XF7A14920 B4KA 8
SFP+ options for base ports and interconnect ports
10Gb SW Optical iSCSI SFP+ Module 1 pack 4XF7A14919 B4K9 12
OM4 cable options for 8 Gb FC, 16 Gb FC, and 10 GbE SW SFP+ optical transceivers
Lenovo 0.5m LC-LC OM4 MMF Cable 4Z57A10845 B2P9 12
Lenovo 1m LC-LC OM4 MMF Cable 4Z57A10846 B2PA 12
Lenovo 3m LC-LC OM4 MMF Cable 4Z57A10847 B2PB 12
Lenovo 5m LC-LC OM4 MMF Cable 4Z57A10848 B2PC 12
Lenovo 10m LC-LC OM4 MMF Cable 4Z57A10849 B2PD 12
Lenovo 15m LC-LC OM4 MMF Cable 4Z57A10850 B2PE 12
Lenovo 25m LC-LC OM4 MMF Cable 4Z57A10851 B2PF 12
Lenovo 30m LC-LC OM4 MMF Cable 4Z57A10852 B2PG 12
OM3 cable options for 8 Gb FC, 16 Gb FC, and 10 GbE SW SFP+ optical transceivers
Maximum
quantity per
Feature controller
Description Part number code enclosure
Lenovo 0.5m LC-LC OM3 MMF Cable 00MN499 ASR5 12
Lenovo 1m LC-LC OM3 MMF Cable 00MN502 ASR6 12
Lenovo 15m LC-LC OM3 MMF Cable 00MN514 ASRA 12
Lenovo 25m LC-LC OM3 MMF Cable 00MN517 ASRB 12
Lenovo 30m LC-LC OM3 MMF Cable 00MN520 ASRC 12
DAC cable options for 10 GbE SFP+ connectivity (SFP+ base ports and interconnect ports)
0.5m Passive DAC SFP+ Cable 00D6288 A3RG 12
1m Passive DAC SFP+ Cable 90Y9427 A1PH 12
1.5m Passive DAC SFP+ Cable 00AY764 A51N 12
2m Passive DAC SFP+ Cable 00AY765 A51P 12
3m Passive DAC SFP+ Cable 90Y9430 A1PJ 12
5m Passive DAC SFP+ Cable 90Y9433 A1PK 12
7m Passive DAC SFP+ Cable 00D6151 A3RH 12
UTP Category 6 cables options for 1/10 GbE RJ-45 host connectivity and 1 GbE RJ-45 management ports
0.75m Green Cat6 Cable 00WE123 AVFW 10
1.0m Green Cat6 Cable 00WE127 AVFX 10
1.25m Green Cat6 Cable 00WE131 AVFY 10
1.5m Green Cat6 Cable 00WE135 AVFZ 10
3m Green Cat6 Cable 00WE139 AVG0 10
10m Green Cat6 Cable 90Y3718 A1MT 10
25m Green Cat6 Cable 90Y3727 A1MW 10
* Factory-installed only.
Expansion enclosures
The ThinkSystem DM5000F supports attachment of up to five ThinkSystem DM240S 2U24 SFF
enclosures. The expansion enclosures can be added to the system non-disruptively.
The following table lists the CTO base models for the ThinkSystem DM Series expansion enclosures.
Table 4. CTO base models for the ThinkSystem DM Series expansion enclosures
Machine Feature
Description Type/Model code
DM240S 2U24 SFF Expansion Enclosure (1-year warranty) 7Y58CTO1WW BEY7
DM240S 2U24 SFF Expansion Enclosure (3-year warranty) 7D7YCTO1WW BEY7
Configuration note: Two I/O expansion modules (feature code B39J) are pre-selected by the configurator.
The models of the ThinkSystem DM240S ship with the following items:
One chassis with the following components:
Two I/O modules
Two power supplies
Rack Mount Kit
Electronic Publications Flyer
Two customer-configured power cables
Each ThinkSystem DM Series expansion enclosure ships with two SAS I/O expansion modules. Each
I/O expansion module provides two external 12 Gb SAS x4 ports (Mini-SAS HD SFF-8644 connectors
labelled Port 1-4) that are used for connections to the ThinkSystem DM5000F and for daisy chaining the
expansion enclosures between each other.
The dual-path HA (high availability) connectivity topology for the enclosures is shown in the following figure.
Figure 6. DM5000F expansion enclosure connectivity topology

Expansion cabling rules:
Port 0b on the Controller 1 is the primary path that is connected to the Port 3 on the I/O Module A in
the last expansion enclosure in a stack.
Port 1 on the I/O Module A in the last expansion enclosure is connected to Port 3 on the I/O Module
A in the adjacent expansion enclosure, and so on (until the first expansion enclosure in a stack is
cabled).
Port 0a on the Controller 1 is the secondary path that is connected to the Port 1 on the I/O Module B
in the first expansion enclosure in a stack.
Port 0b on the Controller 2 is the primary path that is connected to the Port 3 on the I/O Module B in
the last expansion enclosure in a stack.
Port 1 on the I/O Module B in the last expansion enclosure is connected to Port 3 on the I/O Module
B in the adjacent expansion enclosure, and so on (until the first expansion enclosure in a stack is
cabled).
Port 0a on the Controller 2 is the secondary path that is connected to the Port 1 on the I/O Module A
in the first expansion enclosure in a stack.
The following table lists ordering information for the supported expansion enclosure connectivity options.
Table 5. Expansion enclosure connectivity options
Maximum
quantity per
Part Feature one expansion
Description number code enclosure
External MiniSAS HD 8644/MiniSAS HD 8644 0.5M Cable 00YL847 AU16 4
External MiniSAS HD 8644/MiniSAS HD 8644 1M Cable 00YL848 AU17 4
Configuration note: The following quantities of SAS cables are needed for the stack of the expansion
enclosures:
Two SAS cables per expansion enclosure in the stack for connecting the first expansion enclosure in
the stack to the controller enclosure and for connections to the adjacent expansion enclosures.
Two additional SAS cables for connecting the last expansion enclosure in the stack to the controller
enclosure.
Drives
Drives
The ThinkSystem DM5000F and DM240S 2U24 SFF enclosures support up to 24 SFF hot-swap drives. The
following table lists supported drive options for the DM5000F and DM240S 2U24 SFF enclosures.
The following table lists supported drive packs for the controller and expansion enclosures.
Configuration notes:
When ordering the systems, select the drives that match the ONTAP offering and bundle you are
installing on the DM controller. Drive feature codes are specific to Unified or SAN Only offerings, and
to Base, Fundamentals and Premium bundles. See the Software section for details.
Drives are sold in packs. Supported quantities are as follows:
The DM5000F 2U24 SFF controller enclosures support only 12, 18 or 24 SFF drives
The DM240S 2U24 SFF expansion enclosures support only 6, 12, 18 or 24 SFF drives
All drives in the enclosure must be of the same type and capacity.
Field upgrades: Drive packs for field upgrades can be ordered via the CTO base 7D4FCTO4WW,
ThinkSystem DM Drive Pack Upgrades. These are for use in existing expansion enclosures that have
not been fully populated with the factory-installed drive packs
Table 6. Drive option feature codes

ONTAP: Unified ONTAP: SAN Only
Max
Drive Pack (6 drives each) Premium/Complete Fundamental† Premium Fundamental† Qty
Lenovo ThinkSystem 5.8TB (6x 960GB, BLTK BLTF BLTX BLTT 4
2.5", Non-SED SSD) Drive Pack for
DM5000F
Lenovo ThinkSystem 23TB (6x 3.84TB, BLTL BLTG BLTY BLTU 4
DM5000F
Lenovo ThinkSystem 46.1TB (6x 7.68TB, BLTM BLTH BLTZ BLTV 4
DM5000F
Lenovo ThinkSystem 92.2TB (6x BLTN BLTJ BLU0 BLTW 4
15.36TB, 2.5", Non-SED SSD) Drive
Pack for DM5000F
† Available world-wide except China
Software
In this section:
Feature bundles
ONTAP software versions
Upgrading to Unified Premium ONTAP
Ansible playbooks for DM Series
ONTAP software unifies data management across flash, disk, and cloud to simplify the Lenovo DM storage
environment. It builds the foundation for a Data Fabric, making it easy to move the data where it is needed
across flash, disk, and cloud resources.
Feature bundles
Controller software for the DM5000F is available in the following bundles of features:
SAN Fundamentals (All markets except China) (Feature BKKD)
SAN Base (China only) (Feature BKKC)
SAN Premium (Feature BKKE)
Unified Fundamentals (All markets except China) (Feature B72U)
Unified Essentials (China only) (Feature BWU9)
Unified Complete (Feature BWU8)
The following table summarizes the features in each bundle for the DM5000F.
Table 7. Comparison of software features for the DM5000F

Unified Unified Unified
SAN Base SAN Fundamentals Essentials Complete
Feature (PRC only) Premium (ISO) (PRC only) (WW)
Controller software feature code BKKC BKKE B72U BWU9 BWU8
RAID-4, RAID-DP, and RAID-TEC data Included Included Included Included Included
protection
SAN (Block access): iSCSI, FC, Included Included Included Included Included
NVMe/FC
NAS (File access): NFS, CIFS/SMB No No Included Included Included
Thin provisioning Included Included Included Included Included
Compression Included Included Included Included Included
Deduplication Included Included Included Included Included
Snapshots Included Included Included Included Included
Encryption* No No Included* No Included*
Balanced placement Included Included Included Included Included
Dynamic capacity expansion Included Included Included Included Included
Adaptive Quality of Service Included Included Included Included Included
SnapRestore Included Included Included Included Included
FlexClone Included Included Included Included Included
FlexVol Included Included Included Included Included
FlexCache No No Included Included Included
SnapMirror asynchronous replication No Included Included No Included
SyncMirror data protection Included Included Included Included Included
Trusted Platform Module (TPM) support No No Included No Included †
MetroCluster IP Included Included Included Included Included
NVMe over FC Protocol No No No No No
NVMe over TCP Protocol Included Included Included Included Included
SnapMirror synchronous replication No Included No No Included
FlexGroup No No Included Included Included
SnapVault disk-based storage backup No No No No Included
SnapCenter No Included No No Included
ONTAP S3 No No Included Included Included
ONTAP S3 SnapMirror No No No No Included
SnapLock data protection No No No No Included
Unified Unified Unified
SAN Base SAN Fundamentals Essentials Complete
Feature (PRC only) Premium (ISO) (PRC only) (WW)
Multitenant Key Magement No No No No Included
Anti-ransomware Protection No No No No Included
SnapMirror Cloud No No No No Included
FabricPool object storage tiering Optional Optional Optional Optional Optional
* Requires the encryption version of ONTAP. See the ONTAP software section
† Not available in PRC
The features are summarized as follows:
RAID-4, RAID-DP, and RAID-TEC data protection : Provides the flexibility to choose the level of
data protection required and helps improve performance and availability with built-in spare capacity
and by distributing data across all physical drives in the aggregate, sustaining to up to one (RAID-4),
two (RAID-DP), or three (RAID-TEC) concurrent drive failures.
All Flash Array (AFA) capability : Meets the demand for higher speed, lower latency storage and
provides higher IOPS and bandwidth with lower power usage and total cost of ownership than hybrid
or HDD-based solutions.
Thin provisioning: Optimizes efficiency by allocating storage space based on the minimum space
required by each application at any given time, so that applications consume only the space they are
actually using, not the total space that has been allocated to them, which allows customers to
purchase storage they need today and add more as application requirements grow.
Compression: Provides transparent inline and post-process data compression to reduce the amount
of storage that customers need to purchase and manage.
Compaction: enhances compression to further reduce the amount of storage that customers need to
purchase and manage.
Deduplication: Performs general-purpose deduplication for removal of redundant data to reduce the
amount of storage that customers need to purchase and manage.
Snapshots: Enables creation of read-only copies of data for backup, parallel processing, testing, and
development, and have the copies available almost immediately.
Encryption: Provides software-based encryption for data at rest for enhanced data security with the
traditional drives and embedded key management (requires the encryption-capable version of the
ONTAP software).
Balanced placement: Provides automated workload distribution across the cluster to help increase
utilization and performance.
Dynamic capacity expansion: Allows the capacity of a volume or aggregate to be expanded by
adding new physical drives.
Adaptive Quality of Service: Simplifies operations and maintains consistent workload performance
by defining QoS policies and automatically adjusting storage resources to respond to workload
changes.
SnapRestore: Enables quick recovery of data by reverting a local volume or file to its previous state
from a particular snapshot copy stored on the file system.
FlexClone: References snapshot metadata to create writable point-in-time copies of a volume.
FlexVol: Provides abstraction layer between the logical volume and its physical location in the
storage array.
FlexCache: Speeds up access to data and offloads traffic from heavily accessed volumes for read-
intensive workloads by placing frequently used data in cache locally or remotely (closer to the point
of client access) and serving the data to the clients directly from cache without accessing the data
source.
SnapMirror asynchronous replication: Provides storage system-based data replication between
the storage systems containing source (local) and destination (remote) volumes by using
asynchronous (at specified regular intervals) data transfers over IP communication links.
SyncMirror data protection: Adds extra level of data protection and availability by mirroring a pair of
RAID aggregates.
Trusted Platform Module (TPM) : For encryption enabled systems. The encryption keys for the
onboard key manager (OKM) are no longer stored in the boot device, but instead are stored in the
physical TPM for systems so equipped, offering greater security and protection. Moving to the TPM is
a nondisruptive process.
MetroCluster IP: Provides storage system-based clustering with online, real-time data mirroring
between the local and remote sites by using synchronous data transfers over IP communication links
to deliver continuous availability with zero RPO and near-zero RTO. All storage systems in a
MetroCluster IP configuration must be of the same model. New to ONTAP 9.11: MetroCluster with
Storage Virtual Machine Disaster Recovery (SVM-DR) can now use a third site for the SVM-DR
NVMe over TCP Protocol: Enables NVMe over TCP
Data Protection Optimized (DPO): Increases the amount of concurrent SnapMirror sessions per
node, as well as improving SnapMirror performance to the cluster.
SnapMirror Business Continuity (SMBC): Non-disruptive failover active-active cross site clusters.
Based on existing SnapMirror Synchronous Replication. Offers Zero data loss, zero downtime. You
do not have to failover the application. If there is a failure the application will continue to run and
there will be no need to restart.
SnapMirror synchronous replication: Provides storage system-based data replication between the
storage systems containing source (local) and destination (remote) volumes by using synchronous
(as soon as the data is written to the source volume)
FlexGroup: Enables a single volume to span across multiple clustered storage arrays to maximize
storage capacity and automate load distribution. New to ONTAP 9.11: FlexGroups can now be
created as SnapLock volumes.
SnapVault disk-based storage backup: Enables data stored on multiple systems to be backed up
to a central, secondary system quickly and efficiently as read-only snapshot copies.
SnapCenter: Provides application- and virtual machine-aware backup and restoration of data by
using the Snapshots technology and leverages the SnapMirror capabilities of storage systems to
provide onsite or offsite backup set mirroring for disaster recovery.
ONTAP S3: Expands the DM Series unified story and allows customers to manage, block, file, and
object data from one interface. Customers can now natively store data in S3 buckets onboard the DM
Series.
ONTAP S3 SnapMirror : Enables you to protect buckets in ONTAP S3 object stores using familiar
SnapMirror mirroring and backup functionality. Requires ONTAP 9.11 or later on both source and
destination clusters. Requires the Unified Premium Bundle.
SnapMirror Cloud: A backup and recovery technology designed for ONTAP users who want to
transition their data protection workflows to the cloud. SnapMirror Cloud is an extension to the family
of SnapMirror replication technologies. While SnapMirror is frequently used for ONTAP-to-ONTAP
backups, SnapMirror Cloud uses the same replication engine to transfer Snapshot copies for ONTAP
to S3-compliant object storage backups.
Multitenant Key Management (MTKM): Provides the ability for individual tenants or storage virtual
machines (SVMs) to maintain their own keys through KMIP for NVE. With multitenant external key
management, you can centralize your organization’s key management functions by department or
tenant while inherently confirming that keys are not stored near the assets. This approach decreases
the possibility of compromise.
Anti-ransomware: Uses workload analysis in NAS (NFS and SMB) environments to proactively
detect and warn about abnormal activity that might indicate a ransomware attack. When an attack is
suspected, anti-ransomware also creates new Snapshot backups, in addition to existing protection
from scheduled Snapshot copies. New to ONTAP 9.11: Optional multi-admin verification to approve
administration functions that could result in data loss.
FabricPool: FabricPool is a hybrid storage solution that uses an all flash (all SSD) aggregate as the
performance tier and an object store as the external capacity tier. Data in a FabricPool is stored in a
tier based on whether it is frequently accessed or not. Using a FabricPool helps you reduce storage
cost without compromising performance, efficiency, or protection.
SnapLock data protection: Creates Write-Once-Read-Many (WORM) non-rewritable, non-erasable
data on hard disk drives to prevent files from being altered or deleted until a predetermined or default
retention date.
ONTAP software versions

The following table lists the software selection options for the DM5000F. The table also indicates which
markets each version is available in.
Table 8. Software selection

Feature
code Description Availability
ONTAP 9.12
BX90 Lenovo ThinkSystem Storage ONTAP 9.12 Software Encryption - IPAv2 All markets
BX91 Lenovo ThinkSystem Storage ONTAP 9.12 Software NonEncryption - IPAv2 All markets
ONTAP 9.13
BWUA Lenovo ThinkSystem Storage ONTAP 9.13 Software Encryption - IPAv2 All markets
BWUB Lenovo ThinkSystem Storage ONTAP 9.13 Software NonEncryption - IPAv2 All markets
Software maintenance is included in the DM5000F warranty and support (see Warranty and support for
details).
Upgrading to Unified Premium ONTAP

To upgrade your existing ONTAP installation to Unified Premium ONTAP, use DCSC to specify the storage
you already have installed, since the upgrade license is based on your existing configuration.
https://dcsc.lenovo.com/#/configuration/cto/7D4FCTO2WW?hardwareType=storage
The software license for field upgrades is ordered via the CTO base 7D4FCTO2WW, as listed in the
following table.
Table 10. Feature codes for ONTAP upgrades (MTM 7D4FCTO2WW)

Feature code Description
BNDK Unified Fundamental to Unified Premium ONTAP Upgrade Selection
BNDJ All SAN Premium to Unified Premium ONTAP Upgrade Selection
BNDH All SAN Fundamental to Unified Premium ONTAP Upgrade Selection
BNKP All SAN Base to Unified Premium CFC Selection (PRC only)
BNKN Unified Base to Unified Premium CFC Selection (PRC only)
Ansible playbooks for DM Series
Ansible Playbooks give customers the ability to quickly deploy and use DM Series storage systems using a
standard open source deployment tool. Each playbook executes a set of tasks to achieve a
configuration/provisioning goal.
Lenovo has created playbooks that can be used with DM Series storage systems to help with:
Provisioning
Configuring
To access the Ansible Playbooks for Lenovo ThinkSystem DM Series storage systems, go to the following
page:
https://github.com/lenovo/ansible-dm-series-ontap
Management
The ThinkSystem DM5000F supports the following management interfaces:
Lenovo ThinkSystem Storage Manager, a web-based interface via HTTPS for single-system
management or centralized management of the cluster of systems, that runs on the storage system
itself and requires only a supported browser (Microsoft Internet Explorer, Google Chrome, or Mozilla
Firefox), so there is no need for a separate console or plug-in.
Command line interface (CLI) via SSH or through serial console.
Syslog, SNMP, and e-mail notifications.
Optional Lenovo XClarity for discovery, inventory, monitoring, and alerts.
Power supplies and cables
The ThinkSystem DM5000F and DM240S 2U24 SFF enclosures ship with two redundant hot-swap
913 W (100 - 240 V) Platinum AC power supplies, each with an IEC 320-C14 connector.
Each ThinkSystem DM Series enclosure requires the selection of two power cables.
Rack installation
Rack installation
The individually shipped ThinkSystem DM5000F and DM240S enclosures come with the ThinkSystem
Storage Rack Mount Kit 2U24/4U60 listed in the following table.
Table 11. 4-post rack mount kit

Feature
Description code Quantity
Lenovo ThinkSystem Storage Rack Mount Kit 2U24/4U60 B38Y 1
When the ThinkSystem DM Series enclosures are factory-integrated and shipped installed in a rack cabinet,
the rack mount kits that support Ship-in-Rack (SIR) capabilities are derived by the configurator. The SIR-
capable rack mount kits are listed in the following table.
Table 12. 4-post SIR rack mount kits

Feature
Description code Quantity
Lenovo ThinkSystem Storage SIR Rack Mount Kit (for 2U24 enclosures) B6TH 1
The following table summarizes the rack mount kit features and specifications.
Table 13. Rack mount kit features and specifications summary

Screw-in fixed rail with adjustable depth
Attribute 2U24/4U60 2U24 SIR
Feature code B38Y B6TH
Enclosure support DM5000F, DM240S DM5000F, DM240S
Rail type Fixed (static) with adjustable depth Fixed (static) with adjustable depth
Tool-less installation No No
In-rack maintenance Yes* Yes*
Ship-in-rack (SIR) support No Yes
1U PDU support Yes Yes
0U PDU support Limited** Limited**
Rack type IBM or Lenovo 4-post, IBM or Lenovo 4-post,
IEC standard-compliant IEC standard-compliant
Mounting holes Square or round Square or round
Mounting flange thickness 2 mm (0.08 in.) – 3.3 mm (0.13 in.) 2 mm (0.08 in.) – 3.3 mm (0.13 in.)
Distance between front and 605 mm (23.8 in.) – 812.8 mm (32 in.) 605 mm (23.8 in.) – 812.8 mm (32 in.)
rear mounting flanges^
* The majority of the enclosure components can be serviced from the front or rear of the enclosure, which does not require the
removal of the enclosure from the rack cabinet.
** If a 0U PDU is used, the rack cabinet must be at least 1000 mm (39.37 in.) deep for 2U24 enclosures.
^ Measured when mounted on the rack, from the front surface of the front mounting flange to the rear most point of the rail.
Physical specifications
Physical specifications
The ThinkSystem DM5000F controller enclosure has the following dimensions and weight (approximate):
Width: 447 mm (17.6 in.)
Depth: 483 mm (19.0 in.)
Weight (fully configured): 27.6 kg (60.8 lb)
The ThinkSystem DM240S 2U24 SFF enclosures have the following dimensions and weight (approximate):
Width: 449 mm (17.7 in.)
Depth: 484 mm (19.1 in.)
Weight (fully configured): 24.4 kg (53.8 lb)
Operating environment
The ThinkSystem DM5000F and DM240S 2U24 SFF enclosures are supported in the following
environment:
Air temperature:
Operating: 5 °C - 45 °C (41 °F - 113 °F)
Non-operating: -40 °C - +70 °C (-40 °F - 158 °F)
Maximum altitude: 3050 m (10,000 ft)
Relative humidity:
Operating: 8% - 90% (non-condensing)
Non-operating: 10% - 95% (non-condensing)
Electrical power:
DM5000F
100 to 127 (nominal) V AC; 50 Hz or 60 Hz; 5.52 A
Maximum system power load: 524 W
DM240S 2U24 SFF
Maximum system power load: 390 W
Heat dissipation:
DM5000F: 1788 BTU/hour
DM240S 2U24 SFF: 1331 BTU/hour
Acoustical noise emission:
DM5000F: 6.9 bels
DM240S 2U24 SFF: 6.9 bels
Warranty and support
The DM5000F and expansion enclosures have a 1-year or 3-year warranty based on the machine type of
the system, as listed in the following table.
Table 14. Duration of standard warranty

Machine type Machine type
System 1 year warranty 3 year warranty
DM5000F Controller Enclosure 7Y41 7D7W
DM240S 2U24 SFF Expansion Enclosure 7Y58 7D7Y
The standard warranty terms are customer-replaceable unit (CRU) and onsite (for field-replaceable units
FRUs only) with standard call center support during normal business hours and 9x5 Next Business Day
Parts Delivered.
Lenovo’s additional support services provide a sophisticated, unified support structure for your data center,
with an experience consistently ranked number one in customer satisfaction worldwide. Available offerings
include:
Premier Support
Premier Support provides a Lenovo-owned customer experience and delivers direct access to
technicians skilled in hardware, software, and advanced troubleshooting, in addition to the following:
Direct technician-to-technician access through a dedicated phone line
24x7x365 remote support
Single point of contact service
End to end case management
Third-party collaborative software support
Online case tools and live chat support
On-demand remote system analysis
Warranty Upgrade (Preconfigured Support)
Services are available to meet the on-site response time targets that match the criticality of your
systems.
3, 4, or 5 years of service coverage
1-year or 2-year post-warranty extensions
Foundation Service: 9x5 service coverage with next business day onsite response.
YourDrive YourData is an optional extra (see below).
Essential Service: 24x7 service coverage with 4-hour onsite response or 24-hour committed
repair (available only in select markets). Bundled with YourDrive YourData.
Advanced Service: 24x7 service coverage with 2-hour onsite response or 6-hour committed
repair (available only in select markets). Bundled with YourDrive YourData.
Managed Services
Lenovo Managed Services provides continuous 24x7 remote monitoring (plus 24x7 call center
availability) and proactive management of your data center using state-of-the-art tools, systems, and
practices by a team of highly skilled and experienced Lenovo services professionals.
Quarterly reviews check error logs, verify firmware & OS device driver levels, and software as
needed. We’ll also maintain records of latest patches, critical updates, and firmware levels, to ensure
you systems are providing business value through optimized performance.
Technical Account Management (TAM)
A Lenovo Technical Account Manager helps you optimize the operation of your data center based on
a deep understanding of your business. You gain direct access to your Lenovo TAM, who serves as
your single point of contact to expedite service requests, provide status updates, and furnish reports
to track incidents over time. In addition, your TAM will help proactively make service
recommendations and manage your service relationship with Lenovo to make certain your needs are
met.
Enterprise Server Software Support
Enterprise Software Support is an additional support service providing customers with software
support on Microsoft, Red Hat, SUSE, and VMware applications and systems. Around the clock
availability for critical problems plus unlimited calls and incidents helps customers address
challenges fast, without incremental costs. Support staff can answer troubleshooting and diagnostic
questions, address product comparability and interoperability issues, isolate causes of problems,
report defects to software vendors, and more.
YourDrive YourData
Lenovo’s YourDrive YourData is a multi-drive retention offering that ensures your data is always
under your control, regardless of the number of drives that are installed in your Lenovo server. In the
unlikely event of a drive failure, you retain possession of your drive while Lenovo replaces the failed
drive part. Your data stays safely on your premises, in your hands. The YourDrive YourData service
can be purchased in convenient bundles and is optional with Foundation Service. It is bundled with
Essential Service and Advanced Service.
Health Check
Having a trusted partner who can perform regular and detailed health checks is central to maintaining
efficiency and ensuring that your systems and business are always running at their best. Health
Check supports Lenovo-branded server, storage, and networking devices, as well as select Lenovo-
supported products from other vendors that are sold by Lenovo or a Lenovo-Authorized Reseller.
Examples of region-specific warranty terms are second or longer business day parts delivery or parts-only
base warranty.
If warranty terms and conditions include onsite labor for repair or replacement of parts, Lenovo will dispatch
a service technician to the customer site to perform the replacement. Onsite labor under base warranty is
limited to labor for replacement of parts that have been determined to be field-replaceable units (FRUs).
Parts that are determined to be customer-replaceable units (CRUs) do not include onsite labor under base
warranty.
If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement
parts that are under base warranty (including FRUs) that will be sent to a requested location for self-service.
Parts-only service does not include a service technician being dispatched onsite. Parts must be changed at
customer’s own cost and labor and defective parts must be returned following the instructions supplied with
the spare parts.
Lenovo Service offerings are region-specific. Not all preconfigured support and upgrade options are
available in every region. For information about Lenovo service upgrade offerings that are available in your
region, refer to the following resources:
Service part numbers in Lenovo Data Center Solution Configurator (DCSC):
http://dcsc.lenovo.com/#/services
Lenovo Services Availability Locator
http://lenovolocator.com/
For service definitions, region-specific details, and service limitations, please refer to the following
documents:
Lenovo Statement of Limited Warranty for Infrastructure Solutions Group (ISG) Servers and System
Storage
http://pcsupport.lenovo.com/us/en/solutions/ht503310
Lenovo Data Center Services Agreement
http://support.lenovo.com/us/en/solutions/ht116628
Services
Lenovo Services is a dedicated partner to your success. Our goal is to reduce your capital outlays, mitigate
your IT risks, and accelerate your time to productivity.
Note: Some service options may not be available in all markets or regions. For more information, go to
https://www.lenovo.com/services. For information about Lenovo service upgrade offerings that are
available in your region, contact your local Lenovo sales representative or business partner.
Here’s a more in-depth look at what we can do for you:

Asset Recovery Services
Asset Recovery Services (ARS) helps customers recover the maximum value from their end-of-life
equipment in a cost-effective and secure way. On top of simplifying the transition from old to new
equipment, ARS mitigates environmental and data security risks associated with data center
equipment disposal. Lenovo ARS is a cash-back solution for equipment based on its remaining
market value, yielding maximum value from aging assets and lowering total cost of ownership for
your customers. For more information, see the ARS page, https://lenovopress.com/lp1266-reduce-e-
waste-and-grow-your-bottom-line-with-lenovo-ars.
Assessment Services
An Assessment helps solve your IT challenges through an onsite, multi-day session with a Lenovo
technology expert. We perform a tools-based assessment which provides a comprehensive and
thorough review of a company's environment and technology systems. In addition to the technology
based functional requirements, the consultant also discusses and records the non-functional
business requirements, challenges, and constraints. Assessments help organizations like yours, no
matter how large or small, get a better return on your IT investment and overcome challenges in the
ever-changing technology landscape.
Design Services
Professional Services consultants perform infrastructure design and implementation planning to
support your strategy. The high-level architectures provided by the assessment service are turned
into low level designs and wiring diagrams, which are reviewed and approved prior to
implementation. The implementation plan will demonstrate an outcome-based proposal to provide
business capabilities through infrastructure with a risk-mitigated project plan.
Basic Hardware Installation
Lenovo experts can seamlessly manage the physical installation of your server, storage, or
networking hardware. Working at a time convenient for you (business hours or off shift), the
technician will unpack and inspect the systems on your site, install options, mount in a rack cabinet,
connect to power and network, check and update firmware to the latest levels, verify operation, and
dispose of the packaging, allowing your team to focus on other priorities.
Deployment Services
When investing in new IT infrastructures, you need to ensure your business will see quick time to
value with little to no disruption. Lenovo deployments are designed by development and engineering
teams who know our Products & Solutions better than anyone else, and our technicians own the
process from delivery to completion. Lenovo will conduct remote preparation and planning, configure
& integrate systems, validate systems, verify and update appliance firmware, train on administrative
tasks, and provide post-deployment documentation. Customer’s IT teams leverage our skills to
enable IT staff to transform with higher level roles and tasks.
Integration, Migration, and Expansion Services
Move existing physical & virtual workloads easily, or determine technical requirements to support
increased workloads while maximizing performance. Includes tuning, validation, and documenting
ongoing run processes. Leverage migration assessment planning documents to perform necessary
migrations.
Regulatory compliance
The ThinkSystem DM Series enclosures conform to the following regulations:
United States: FCC Part 15, Class A; UL 60950-1
Canada: ICES-003, Class A; CAN/CSA-C22.2 60950-1
Mexico NOM
European Union: CE Mark (EN55032 Class A, EN55024, IEC/EN60950-1); ROHS Directive
2011/65/EU
Russia, Kazakhstan, Belarus: EAC
China: CCC GB 4943.1, GB 17625.1, GB 9254 Class A; CELP; CECP
Japan: VCCI, Class A
Taiwan: BSMI CNS 13438, Class A; CNS 14336-1
Korea KN32/35, Class A
Australia/New Zealand: AS/NZS CISPR 22 Class A
Interoperability
Lenovo provides end-to-end storage compatibility testing to deliver interoperability throughout the network.
The ThinkSystem DM5000F Unified Flash Storage Array supports attachment to Lenovo servers by using
NAS (NFS and CIFS/SMB), iSCSI, and Fibre Channel storage connectivity.
For end-to-end storage configuration support, refer to the Lenovo Storage Interoperation Center (LSIC):
https://datacentersupport.lenovo.com/us/en/lsic
Use the LSIC to select the known components of your configuration and then get a list all other supported
combinations, with details about supported hardware, firmware, operating systems, and drivers, plus any
additional configuration notes. View results on screen or export them to Excel.
Cluster interconnect
The following table lists the Ethernet storage switch that can be used with the ThinkSystem DM5000F All
Flash Storage Array for cluster interconnect and MetroCluster IP configurations.
Table 15. Ethernet storage switch

Description Part number
BES-53248 Ethernet Storage Switch: 16x SFP ports and 2x QSFP ports active, 2 PS (CTO only) 7D2SCTO1WW
For more information, see the BES-53248 Ethernet Storage Switch for Lenovo Product Guide:
http://lenovopress.com/lp1226
Fibre Channel SAN switches
Lenovo offers the ThinkSystem DB Series of Fibre Channel SAN switches for high-performance storage
expansion. See the DB Series product guides for models and configuration options:
ThinkSystem DB Series SAN Switches:
https://lenovopress.com/storage/switches/rack#rt=product-guide
Rack cabinets
The following table lists the supported rack cabinets.
Table 16. Rack cabinets

Part number Description
93072RX 25U Standard Rack (1000mm)
93072PX 25U Static S2 Standard Rack (1000mm)
7D6DA007WW ThinkSystem 42U Onyx Primary Heavy Duty Rack Cabinet (1200mm)
7D6DA008WW ThinkSystem 42U Pearl Primary Heavy Duty Rack Cabinet (1200mm)
93604PX 42U 1200mm Deep Dynamic Rack
93614PX 42U 1200mm Deep Static Rack
93634PX 42U 1100mm Dynamic Rack
93634EX 42U 1100mm Dynamic Expansion Rack
93074RX 42U Standard Rack (1000mm)
7D6EA009WW ThinkSystem 48U Onyx Primary Heavy Duty Rack Cabinet (1200mm)
7D6EA00AWW ThinkSystem 48U Pearl Primary Heavy Duty Rack Cabinet (1200mm)
For specifications about these racks, see the Lenovo Rack Cabinet Reference, available from:
https://lenovopress.com/lp1287-lenovo-rack-cabinet-reference
For more information, see the list of Product Guides in the Rack cabinets category:
https://lenovopress.com/servers/options/racks
Power distribution units

The following table lists the power distribution units (PDUs) that are offered by Lenovo.
Table 17. Power distribution units

ASEAN
JAPAN
RUCIS
Brazil
INDIA
MEA
Part Feature
PRC
ANZ
HTK
EET
WE
NA
LA
number code Description

0U Basic PDUs
00YJ776 ATZY 0U 36 C13/6 C19 24A 1 Phase PDU N Y Y N N N N N N Y Y Y N
0U Switched and Monitored PDUs
00YJ783 AU04 0U 12 C13/12 C19 Switched and Monitored N N Y N N N Y N N Y Y Y N
48A 3 Phase PDU
00YJ781 AU03 0U 20 C13/4 C19 Switched and Monitored N N Y N Y N Y N N Y Y Y N
24A 1 Phase PDU
1U Switched and Monitored PDUs
ASEAN
JAPAN
RUCIS
Brazil
INDIA
MEA
Part Feature
PRC
ANZ
HTK
EET
WE
NA
LA
4PU7A81117 BNDV 1U 18 C19/C13 switched and monitored 48A N N N N N N N N N N N Y N
3P WYE PDU - ETL
4PU7A77467 BLC4 1U 18 C19/C13 Switched and Monitored 80A N N N N N N N N N Y N Y N
3P Delta PDU
4PU7A77469 BLC6 1U 12 C19/C13 switched and monitored 60A N N N N N N N N N N N Y N
3P Delta PDU
4PU7A77468 BLC5 1U 12 C19/C13 switched and monitored 32A Y Y Y Y Y Y Y Y Y N Y Y Y
3P WYE PDU
4PU7A81118 BNDW 1U 18 C19/C13 switched and monitored 48A Y Y Y Y Y Y Y Y Y N Y N Y
3P WYE PDU - CE
1U Ultra Density Enterprise PDUs (9x IEC 320 C13 + 3x IEC 320 C19 outlets)
71763NU 6051 Ultra Density Enterprise C19/C13 PDU N N Y N N N N N N Y Y Y N
60A/208V/3PH
71762NX 6091 Ultra Density Enterprise C19/C13 PDU Y Y Y Y Y Y Y Y Y Y Y Y Y
Module
1U C13 Enterprise PDUs (12x IEC 320 C13 outlets)
39Y8941 6010 DPI C13 Enterprise PDU Module (WW) Y Y Y Y Y Y Y Y Y Y Y Y Y
1U Front-end PDUs (3x IEC 320 C19 outlets)
39Y8938 6002 DPI Single-phase 30A/120V Front-end PDU Y Y Y Y Y Y Y Y Y Y Y Y Y
(US)
(US)
(International)
39Y8940 6004 DPI Single-phase 60A/208V Front-end PDU Y N Y Y Y Y Y N N Y Y Y N
(US)
(International)
1U NEMA PDUs (6x NEMA 5-15R outlets)
39Y8905 5900 DPI 100-127V NEMA PDU Y Y Y Y Y Y Y Y Y Y Y Y Y
Line cords for 1U PDUs that ship without a line cord
40K9611 6504 4.3m, 32A/380-415V, EPDU/IEC 309 Y Y Y Y Y Y Y Y Y Y Y Y Y
3P+N+G 3ph wye (non-US) Line Cord
40K9612 6502 4.3m, 32A/230V, EPDU to IEC 309 P+N+G Y Y Y Y Y Y Y Y Y Y Y Y Y
(non-US) Line Cord
40K9613 6503 4.3m, 63A/230V, EPDU to IEC 309 P+N+G Y Y Y Y Y Y Y Y Y Y Y Y Y
(non-US) Line Cord
40K9614 6500 4.3m, 30A/208V, EPDU to NEMA L6-30P Y Y Y Y Y Y Y Y Y Y Y Y Y
(US) Line Cord
40K9615 6501 4.3m, 60A/208V, EPDU to IEC 309 2P+G N N Y N N N Y N N Y Y Y N
(US) Line Cord
40K9617 6505 4.3m, 32A/230V, Souriau UTG Female to Y Y Y Y Y Y Y Y Y Y Y Y Y
AS/NZ 3112 (Aus/NZ) Line Cord
ASEAN
JAPAN
RUCIS
Brazil
INDIA
MEA
Part Feature
PRC
ANZ
HTK
EET
WE
NA
LA
40K9618 6506 4.3m, 32A/250V, Souriau UTG Female to Y Y Y Y Y Y Y Y Y Y Y Y Y
KSC 8305 (S. Korea) Line Cord
For more information, see the Lenovo Press documents in the PDU category:
https://lenovopress.com/servers/options/pdu
Uninterruptible power supply units

The following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo.
Table 18. Uninterruptible power supply units

Part number Description
55941AX RT1.5kVA 2U Rack or Tower UPS (100-125VAC)
55941KX RT1.5kVA 2U Rack or Tower UPS (200-240VAC)
55942AX RT2.2kVA 2U Rack or Tower UPS (100-125VAC)
55942KX RT2.2kVA 2U Rack or Tower UPS (200-240VAC)
55943AX RT3kVA 2U Rack or Tower UPS (100-125VAC)
55943KX RT3kVA 2U Rack or Tower UPS (200-240VAC)
55948PX RT8kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)
55949PX RT11kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)
55943KT† ThinkSystem RT3kVA 2U Standard UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A
outlets)
55943LT† ThinkSystem RT3kVA 2U Long Backup UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19
16A outlets)
55946KT† ThinkSystem RT6kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)
5594XKT† ThinkSystem RT10kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)
† Only available in China and the Asia Pacific market.
For more information, see the list of Product Guides in the UPS category:
https://lenovopress.com/servers/options/ups
Lenovo Financial Services

Lenovo Financial Services reinforces Lenovo’s commitment to deliver pioneering products and services that
are recognized for their quality, excellence, and trustworthiness. Lenovo Financial Services offers financing
solutions and services that complement your technology solution anywhere in the world.
We are dedicated to delivering a positive finance experience for customers like you who want to maximize
your purchase power by obtaining the technology you need today, protect against technology obsolescence,
and preserve your capital for other uses.
We work with businesses, non-profit organizations, governments and educational institutions to finance their
entire technology solution. We focus on making it easy to do business with us. Our highly experienced team
of finance professionals operates in a work culture that emphasizes the importance of providing outstanding
customer service. Our systems, processes and flexible policies support our goal of providing customers with
a positive experience.
We finance your entire solution. Unlike others, we allow you to bundle everything you need from hardware
and software to service contracts, installation costs, training fees, and sales tax. If you decide weeks or
months later to add to your solution, we can consolidate everything into a single invoice.
Our Premier Client services provide large accounts with special handling services to ensure these complex
transactions are serviced properly. As a premier client, you have a dedicated finance specialist who
manages your account through its life, from first invoice through asset return or purchase. This specialist
develops an in-depth understanding of your invoice and payment requirements. For you, this dedication
provides a high-quality, easy, and positive financing experience.
For your region-specific offers, please ask your Lenovo sales representative or your technology provider
about the use of Lenovo Financial Services. For more information, see the following Lenovo website:
https://www.lenovo.com/us/en/landingpage/lenovo-financial-services/
Seller training courses

The following sales training courses are offered for employees and partners (login required). Courses are
listed in date order.
1. ONTAP Data Protection Fundamentals
2023-11-02 | 76 minutes | Employees and Partners
In this course, we discuss the integrated data protection features in ONTAP data-management
software. We also discuss the tools and software that you use to manage and monitor the data
protection features. You learn about cluster peering, storage virtual machine (or SVM) peering, and
data protection relationships. You also learn about the architecture and functionality of the Snapshot,
SnapMirror, SnapVault, and SyncMirror technologies.
Course DDMT203 – ONTAP SAN Fundamentals is a prerequisite.
Course Objectives:
• Describe the integrated data protection features in ONTAP data-management software
• Identify the tools and software that you use to manage and monitor ONTAP data protection
features
• Describe cluster peering, storage virtual machine (SVM) peering, and data protection relationships
• Explain the architecture and functionality of the Snapshot, SnapMirror, SnapVault, and SyncMirror
technologies
Published: 2023-11-02
Length: 76 minutes
Employee link: Grow@Lenovo
Partner link: Lenovo Partner Learning
Course code: DDMT204r2
2. ThinkSystem DM Series Technical 200 - ONTAP Data Management Fundamentals
This course focuses on enabling you to manage and provision ONTAP systems and it is part of the
ISG Sales education supporting our ThinkSystem DM and DE Series education. Before taking this
course, you should have completed the ThinkSystem DM and DE Series Overview as well as the
ThinkSystem DM and DE Series Technical Overview 100. 200 level technical knowledge is provided
separately for the DM and DE Series products.
This course focuses on enabling you to do the following:
- Describe the consumers of resources and management requirements

- Describe the user and administrative roles that manage resources
- List the various data management products you can use to manage ONTAP systems
- Define the resources that are commonly provisioned
- Describe various methods and tools that can be used to provision resources
Length: 90 minutes
Course code: DDMT205
3. ThinkSystem DM Series Technical 200 - ONTAP Cluster Fundamentals
This course identifies and describes the components that make up a cluster. It also describes the
supported cluster configurations and details the steps that are required to create and configure a
cluster as well as discusses the physical storage components and the Write Anywhere File Layout
file system, also known as the WAFL file system. Course DDMT200 – ONTAP Technical Positioning
is a prerequisite.
By the end of this course, you will be able to:
-Identify the components that make up a cluster

-Describe the cluster configurations that are supported
-Create and configure a cluster
-Describe the physical storage components
-Describe the Write Anywhere File Layout (WAFL) file system
Length: 135 minutes
4. ThinkSystem DM Series Technical 200 Assessment
This is the assessment for the DM Series Technical 200 training

Length: 15 minutes
5. VEEAM Solutions Sales Training
In this course you will learn about Hyper-availability for the Always-On Enterprise.
By the end of this training, you should be able to:
Identify and explain the core products and solutions offered by Veeam.
Explain the key benefits and value propositions of integrating Veeam solutions with Lenovo products.
Length: 20 minutes
Course code: DSTOO100
6. ONTAP SAN Fundamentals
In this course, you learn how ONTAP provides block access to a host by using SAN protocols. You
learn about LUNs and how to map them to a host to enable read and write access. You also learn
about multipathing techniques that can improve availability and performance.
The course objectives are:
1. Describe how ONTAP provides block access to a host
2. Explain how SANs use the iSCSI, FC, and FCoE protocols to transport data between a host and
storage system
3. List the steps that are required to access a LUN in a storage virtual machine (SVM) from the host
4. Describe multipathing between the host and a cluster
Length: 60 minutes
7. ONTAP NAS Fundamentals
This course describes how ONTAP provides file access to clients. The course also explains how you
use the NFS and SMB protocols to access files, how you access files over a network, and how you
use load-balancing techniques to improve performance.
Course objectives:
1. Describe how ONTAP provides file access to clients
2. Use the NFS protocol to access files
3. Use the SMB protocol to access files
4. Access files over a network and use the load-balancing features of ONTAP
Length: 45 minutes
8. VEEAM Hyper-Availability Integration with ThinkSystem DM Series
In this course you will learn about VEEAM Hyper-Availability for ThinkSystem DM Series
Length: 20 minutes
Course code: DSTOO300
9. Storage Masters - Unified Storage on DM Series
Storage Masters is a multi-module education series. It is intended to help sellers and partners be able
to discuss various storage topics that you will encounter in the field and how to position the valuable
features of the DM Series within these conversations.
By the end of this training, you should be able to:

• Describe the business challenges resolved by the unified storage for the ThinkSystem DM series.
• Learn about the technology implemented on the DM series of storage arrays.
• Find out what are the benefits of the technology and positioning.
Length: 14 minutes
Course code: DSTOT2006
10. Lenovo Data Center Product Portfolio
This course introduces the Lenovo data center portfolio, and covers servers, storage, storage
networking, and software-defined infrastructure products. After completing this course about Lenovo
data center products, you will be able to identify product types within each data center family,
describe Lenovo innovations that this product family or category uses, and recognize when a specific
product should be selected.
Length: 15 minutes
Course code: SXXW1110r6
11. Family Portfolio: Storage
This course covers the Lenovo storage portfolio, from tape drives used for backups and archiving all
the way through high-performance storage systems. After completing this course about the Storage
family, the learner will be able to identify products and features within the family, describe storage
innovations that this product family uses, and recognize when a specific product should be selected.
Length: 15 minutes
Course code: SXSW1201r15
12. Storage Masters - DM Series - Data Security
Length: 14 minutes
13. Benefits and the positioning of Lenovo ThinkSystem file offerings with WEKA, DSS, and
DM+ONTAP
Course objectives:
1. Learn about file storage
2. Understand the different types of storage
3. Recognize the Lenovo data management portfolio
Length: 10 minutes
Course code: DSOLS207
14. Lenovo ThinkSystem DM and DE Series Overview
This course focuses on enabling you to identify current business and technology challenges for your
customers and position the ThinkSystem DM and DE series products, based on the needs of your
customers.
The main objectives are:
• Identify current business and technology challenges for your customers
• Position the Lenovo ThinkSystem DM and DE Series products based on the needs of your
customers
Length: 25 minutes
Course code: DDMO101r5
15. Storage Masters - DM Series Performance
By the end of this course, you will be able to:

• Understand the key business challenges that companies face with their data storage solutions
• Describe DM Series features
• Explain the benefit of DM Series features to customers
Length: 15 minutes
Course code: DSTOT2004r3
16. Storage Masters - Hybrid Cloud for DM Series
Length: 30 minutes
17. ONTAP Fundamentals Bundle
ONTAP Fundamentals is intended to help sellers and partners be able to discuss the ONTAP
Fundamentals license. By the end of this training, you should be able to position ONTAP
Fundamentals within the marketplace; describe the ONTAP bundle; identify when to use the ONTAP
Bundle in an opportunity; and determine when to use ONTAP Premium in an opportunity.
Length: 15 minutes
Course code: DSTOF200
18. Lenovo ThinkSystem DM and DE Series Technical Overview
This course provides a technical overview of the ThinkSystem DM and DE series products. Course
DDMO101 – Lenovo ThinkSystem DM & DE Series Overview is recommended prior to this course.
By the end of this course, you should be able to:

• Describe the Lenovo portfolio for the DM and DE storage systems
• Explain features of the DM series ONTAP software
• Explain features of the ThinkSystem SAN Manager
Length: 60 minutes
19. ONTAP 9.11.1 Update
This course aims to inform Lenovo and Partner sellers regarding the latest ONTAP 9.11.1 updates
and what it means for Lenovo ThinkSystem DM Series Storage. Key New Functions and Features
with ONTAP 9.11.1 Updates are:
• Autonomous Ransomware Protection enhancements
• SnapLock support for FlexGroup
• Ease of Use (ONTAP S3 enhancements)
Length: 30 minutes
Course code: DDMO201
20. How to Attach Services for ThinkSystem DM Using DCSC
The goal of this training is to review services for ThinkSystem DM products, professional and support
services, support levels, and recommended options. By the end of this course, you will be able to
summarize the professional services for ThinkSystem DM, identify the levels of maintenance support
for the DM series, and recognize the steps required to attach services to DM products.
Length: 20 minutes
Course code: DSVC122r3
21. Benefits of All-Flash Arrays
This course starts by comparing and contrasting HDDs and SSDs, and lists the advantages of SSDs
in all-flash arrays. Specific advanced features made possible by SSDs in AFAs are discussed, and
workloads that are well-suited to AFAs are described.
Length: 10 minutes
Course code: SXXW1232
22. ONTAP Technical Positioning
This course focuses on enabling you to interpret the technical market trends and challenges that
ONTAP customers face. You also learn to ask qualifying questions that identify which industries,
companies, and customer contacts are appropriate targets for ONTAP software. Module two covers
explaining ONTAP features and functionality and enables you to strengthen ONTAP marketing claims
with technical details.
Learning Objectives:
• Interpret the technical market trends and challenges that ONTAP customers face
• Ask qualifying questions that identify which industries, companies, and customer contacts are
appropriate targets for ONTAP software
• Explain ONTAP features and functionality
• Strengthen ONTAP marketing claims with technical details
Length: 45 minutes
23. Selling ONTAP
In this course, you learn how ONTAP software helps your customers simplify data management,
access and protect their data across clouds, and future-proof their environments.
Learning objectives:
• Explain the value of ONTAP data-management software
• Describe the features and benefits of ONTAP 9 software
• Effectively position ONTAP software to your customers
Length: 22 minutes
Course code: DDMO102
24. Storage Masters – Data Protection on DM Series
Length: 30 minutes
25. Storage Masters – Data Efficiency Technologies on DM Series
Length: 20 minutes
Related publications and links

For more information, see the following resources:
Lenovo Data Center Unified Storage product page
https://www.lenovo.com/us/en/c/data-center/storage/unified-storage
Lenovo Data Center Solution Configurator
http://dcsc.lenovo.com
ThinkSystem DM Series documentation
http://thinksystem.lenovofiles.com/storage/help/topic/ontap_software/overview.html
ONTAP Ransomware Protection
https://thinksystem.lenovofiles.com/storage/help/topic/ontap_anti-ransomware/anti-ransomware.pdf
Lenovo Data Center Support - ThinkSystem DM5000F
http://datacentersupport.lenovo.com/us/en/products/storage/lenovo-storage/thinksystem-dm5000f
Related product families

Product families related to this document are the following:
DM Series Storage
External Storage
Lenovo SAN Storage
Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your
local Lenovo representative for information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product,
program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify
the operation of any other product, program, or service. Lenovo may have patents or pending patent applications
covering subject matter described in this document. The furnishing of this document does not give you any license to
these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.

8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time
without notice.
The products described in this document are not intended for use in implantation or other life support applications
where malfunction may result in injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express
or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information
contained in this document was obtained in specific environments and is presented as an illustration. The result
obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply
in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any
manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials
for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was
determined in a controlled environment. Therefore, the result obtained in other operating environments may vary
significantly. Some measurements may have been made on development-level systems and there is no guarantee
that these measurements will be the same on generally available systems. Furthermore, some measurements may
have been estimated through extrapolation. Actual results may vary. Users of this document should verify the
applicable data for their specific environment.
© Copyright Lenovo 2024. All rights reserved.
This document, LP0911, was created or updated on December 20, 2023.

Send us your comments in one of the following ways:
Use the online Contact us review form found at:
https://lenovopress.lenovo.com/LP0911
Send your comments in an e-mail to:
[email protected]
This document is available online at https://lenovopress.lenovo.com/LP0911.
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other
countries, or both. A current list of Lenovo trademarks is available on the Web at
https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
Lenovo Services
ThinkSystem®
XClarity®
The following terms are trademarks of other companies:
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Microsoft®, Excel®, Internet Explorer®, Windows Server®, and Windows® are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.

Lenovo DM Storage Series

Uploaded by

Copyright:

Available Formats

Lenovo DM Storage Series

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lenovo DM Storage Series

Uploaded by

Copyright:

Available Formats

Lenovo ThinkSystem DM5000F Unified and DM5000F

SAN Flash Storage Array

Figure 1. Lenovo ThinkSystem DM5000F

Did you know?

Click here to check for updates

Components and connectors

Figure 2. ThinkSystem DM5000F or DM240S enclosure front view

Figure 5. ThinkSystem DM240S 2U expansion enclosure rear view

Table 1. ThinkSystem DM5000F system specifications

2U24 SFF expansion enclosure:

Table 2. ThinkSystem DM5000F CTO base models

Table 3. DM5000F controllers and connectivity options

Figure 6. DM5000F expansion enclosure connectivity topology

Table 6. Drive option feature codes

Table 7. Comparison of software features for the DM5000F

ONTAP software versions

Table 8. Software selection

Upgrading to Unified Premium ONTAP

Table 10. Feature codes for ONTAP upgrades (MTM 7D4FCTO2WW)

Table 11. 4-post rack mount kit

Table 12. 4-post SIR rack mount kits

Table 13. Rack mount kit features and specifications summary

Table 14. Duration of standard warranty

Here’s a more in-depth look at what we can do for you:

Table 15. Ethernet storage switch

Table 16. Rack cabinets

Power distribution units

Table 17. Power distribution units

number code Description

Uninterruptible power supply units

Table 18. Uninterruptible power supply units

Lenovo Financial Services

Seller training courses

Course DDMT203 – ONTAP SAN Fundamentals is a prerequisite.

This course focuses on enabling you to do the following:

- Describe the consumers of resources and management requirements

By the end of this course, you will be able to:

-Identify the components that make up a cluster

This is the assessment for the DM Series Technical 200 training

By the end of this training, you should be able to:

By the end of this training, you should be able to:

By the end of this course, you will be able to:

By the end of this course, you should be able to:

Related publications and links

Related product families

Lenovo (United States), Inc.

© Copyright Lenovo 2024. All rights reserved.

This document, LP0911, was created or updated on December 20, 2023.

You might also like