CURRICULUM VITAE

Roshan Saratker
(Experience 7 Years)

Address for Correspondence: Flat No. 02, Omkar Nagar Near Shrirang Vihar, Talegaon Station Area
Talegaon Dabhade, Pune-410506

Contact No. : +919762153438, 96178185109

E mail ID : [email protected]
Career Objectives

Like to accept / participate some challenging job in trouble some situation utilizes my techno- commercial
skill and knowledge. Committed to excellence and believe in development / growth of the organization
using energy, persistent and hard work

Key Skills
 Certified internal Auditor for IATF 16949:2016.
 Certified internal Auditor for ISO 9001:2015
 Change Management, Trial & Development Activity support.
 Hand on Experience of handling customer & supplier issues of automotive OEMs.
 Works as a CFT Member (Cross Functioning Team) throughout the New Project Development.
Expertise
Root cause analysis, Verification & validation, Supplier development, Change Management, Supplier
Evolution, Supplier & customer Quality, Internal & supplier Audits
Career Profile

Current Organization: The Supreme Industries Ltd. Pune

Major Customers- Bajaj Auto Ltd, LG Elecronics, Carrier Midea, Varroc Engineering, Western

refrigeration, etc.

Quality assurance Executive (officer) (From June 2020 to Prresent)

 Prepare process & quality related control plans.

 Monitoring in process cum online inspection at production stage.
 Communicate daily process related issues to all related dept. and taking action.
 Attending customer complaint & market related concern. & sharing their action plan
 Monitoring of supplier performance PPM monthly.
 Preparing monthly basis MIS data of Quality.
 Monitoring the QMS status of supplier.
 Ensure all the suppliers maintain the appropriate certification level according to our needs.
 Audit and validate new suppliers according the Supreme Industries validation process.
 Communicate to daily issue to supplier of their parts.
 Monitoring Incoming Inspection of daily RM PM & child parts.
 Conducting daily quality (DWM) meeting.
 Comparing of products quality into market competitors.
 Taking a trial of different types of material to reducing the cast.
 Conduct Mechanical testing of PE & PU Adhesive coated foams like: -
• Tensile test, Elongation test, Tear test, Compression strength, Compression set, Resilience
rebounce test, Water absorption, Flammability test (FR), Peel off strength, shear strength Etc.

.
1.) Previous Organization: Abhijeet plastics(I) Private Limited, Pune (Expert ing Automobile Blow
& injection moldings components)

Major Customers- VW, MVML, Faurecia, Fiat, JCB, Yanfeng, IAC, SMRC, Tata Motors, Godrej Interio, Tata
Ficosa

Executive (Quality Assurance incoming & Supplier)-Sept.-2015 to March 2020

A. Supplier Panel Management

 Conduct the supplier audit & monitor supplier performance & supplier improvements.
 Validate & monitor the actions of suppliers on the complaints.
 Conduct the trial at supplier end on new product development as well as regular outsource products.
 Communicate daily process related issues to supplier parts and taking action.
 Monitoring Incoming Inspection of daily RM PM & child parts
 Monitoring supplier performance PPM on monthly basis
 Support & validate the new source along with purchase & coordinate with purchase team for quality issues.
 Prepare test plans for NPD parts as per customer specific requirements & relevant standard.
 Ensure all the suppliers maintain the appropriate certification level according to our needs.
 Analyze & attend supplier issues, supplier audits, monitor supplier concerns at in house & at customer end.
 Verify & validate product at supplier end as per customer requirement at NPD stage with development.
 Verify & monitor the sustenance of supplier corrective & preventive actions.

B. Project Management

 Validate new product development, its testing & provide solutions to human error.
 Risk analysis, participating in CFT & sharing lesson learns,
 Manage in coordination with the Project Buyer the Kick-off meeting, ensuring that our technical
specifications along with project requirements are understood and covered by the in-house development
plan
 Prepare test plans for NPD parts as per customer specific requirements & relevant standard.
 Attend the APQP Status review meeting & update the new supplier product –process development.
 Approve the supplier PPAP & submit PPAP to customer during product life cycle
 Coordinate & Prepare PPAP documents, Product process change management at supplier end.
 Providing technical input and guidance on process enhancements and improvement at development stage.
 Attend the APQP Status review meeting & update the new supplier product –process development

C. In-house Quality in Mass Production

 Recommend lesson learned to New product development team for upcoming projects.
 Conduct the trial at supplier end on new product development as well as regular outsource products.
 Attend the APQP Status review meeting & update the new supplier product –process development.
 Attend the customer audits & provide support during audits
 Analyze the defect & find out root cause by using various tools like Cause analysis table, brain
storming, why-why analysis, fishbone diagram
 Responsible for RM Testing, testing agreement, data collection & quotation for purchase order at NPD
 Responsible to adherence of Quality standard like IATF & ISO, at supplier end.
 Prepare process & incoming quality related control plans.
 Conducting daily quality (DWM) meeting.
 Preparing monthly basis MIS (QRM) data of Quality
 Coordinating & preparing PPAP documents, Product & process change management at supplier.
 Timely submitting customer audit NC reports
 Review customer specific requirement & link with QMS procedure
 Prepare SOP, Q-alert & defects display
 Active participation in Kaizen & WCM activity
 Contribute for continual improvement through Kaizens & Pokayoke
  Monitoring & co-ordinate of change management PCN, ECN, SCN, LCN tracking & review with all HOD.
 Conducting calibration as per monthly calibration plan and their record updates
 Handling different types of engineering equipment & instrument Like – Bore gauge, pin gauge different types
of slip gauge Digital height gauge, Digital Vernier caliper, Dial caliper, Micrometer, Plain plug gauge, Radius
gauges, Thread gauge, Ultrasonic thickness tester, DFT micron gauge, Gloss meter, Spectrometer color
matching cabinet, Hardness tester, Dial caliper etc.
 Raw material testing: -
 Melt flow index, density test, moisture content, filler content test, etc.

2.) Previous Organization: Kisan Moulding Ltd. Mahagaon Boisar (Tarapur) Mumbai.

. Manufacturing of PVC Pipes & fittings

Major Customers- TATA, BSNL, MTNL, JMC Construction, Pioneer Construction, Shirke Construction, Lyods
Group, Sterling Builders etc.

Experience: March-2014 to Aug.-2015

 Department: Quality Assurance

 Job profile: Quality Control Engineer (Customer Quality & Final Quality)

 Analyze & attend the customer complaint

 Execute containment action on customer complaint
 Provide a communication to concern dept. regarding complaint
 Analyze the defect & find out root cause by using various tools like Cause analysis table,
brain storming, why-why analysis, fishbone diagram
 Contribute for continual improvement through Kaizens & Pokayoke
 In process inspection in UPVC SWR, (IS-13592) AGRI, (IS- 4985) and ASTM D,(1785) Plumbing Pipes and their
testing
 In process inspection in AGRI fitting (IS-7834) ASTM fitting and SWR, (IS-14735) fitting and their testing
 Daily Pipes & Fittings testing and their inspection
 As per IS requirements daily shift wise record updating.
 Analysis of rework rejection and its causes
 Attending trial of new developed mould & submitting their reports
 Good Knowledge of trouble shooting of PVC Extrusion Pipe process
 Preparation of SOP related to plant & Quality Control
 Test conducting: -
Flow rate of emitting pipe, Hydrostatic pressure test. Sulphated ash content test,
Drop impact test, tensile test, Reversion test, VST test, Stress relief test etc.

Industrial Achievements & Rewards

1. Rewarded for highest no. of kaizen award of the Month at Sept. 2016 at Abhijeet Plastics.
2. Rewarded Employee of the Month at Sept. 2016 at Abhijeet Plastics.
3. Rewarded with Silver trophy for best Detection Pokayoke theme (Project-S106-Fender
applique)- Quality forum Pune-Sept-2018
4. Rewarded with Second prize for best occurrence level pokayoke in Group level Pokayoke (VECV)

Technical Skills

 Completed an Internal Auditor Certification course of IATF 16949: 2016.

 Completed an Internal Auditor Certification course of EMS OHSAS
 CAD Software: Auto-CAD, CATIA NX 7.5 by CIPET BHOPAL

IT Skills
 Operating Systems: Windows 7, 8 ,10, Package: MS Office (2007/2010)
 Hands On Experience SAP S/4HANA System in PPQM Module.

Special Area of Interest

Quality Assurance Department, Vendor Development, Human errors prevention

Qualifications
 Diploma in Plastics Technology CIPET from Cipet Bhopal in year 2013 (72%)
 Higher Secondary Certificate(HSC) from MP Board, Madhya Pradesh State Board in the year 2008(62%)
 Secondary School Certificate(SSC) from MP Board, Madhya Pradesh State Board in the year 2010(65%)
Project Details

1.To prevent the wrong brackets to the ducts

Objective- Prevent customer complaints & maintain zero
PPM Industry-M/s-Abhijeet Plastics India

2.. To give multi solution & reduce the human error in

ducts Objective- Prevent customer complaint & reduce
COPQ Industry-M/s-Abhijeet Plastics
Personal Information

Name - Roshan Saratker.

Permanent Address - At Sirkhed (Gangapur) Post-Mangona khurd, Th-Multai Distt-Betul
State - Madhya Pradesh
th
Date of Birth - 25 January 1993
Sex - Male
Marital Status - Single
Languages Known - English, Hindi and Marathi
Declaration
I hereby declare that above mentioned information is true and correct to best of my knowledge & belief.

(Roshan Saratker)

Place- Pune