Product Description High molecular weight polyacrylamide-based The shelf life of the product is min. 48 months from flocculants, which exhibit varying degrees of cationic date of manufacturing if it is stored in its sealed charge. They are supplied as free flowing powders. original packaging within a temperature range of 5°C – 35°C in a dry place. Product Cationic Charge Molecular Weight Zetag 8110-AP Very low Ultra-high Corrosion towards most standard materials of Zetag 8125-AP low High construction is very low. Stainless steel, fibreglass, Zetag 8127-AP low Ultra-high polyethylene, polypropylene and rubberized surfaces Zetag 8137-AP low Ultra-high are recommended. In some cases, aluminium Zetag 8140-AP Medium High surfaces can be adversely affected. Zetag 8147-AP Medium Ultra-high Zetag 8157-AP Medium Ultra-high These products are not suitable for use in potable Zetag 8160-AP Medium-high High water applications. If in any doubt regarding Zetag 8165-AP Medium-high Very high suitability for a given application, please contact your Zetag 8167-AP Medium-high Ultra high local sales representative. Zetag 8180-AP High High Zetag 8185-AP High Very high Packaging Zetag 8187-AP High Ultra high This product is available in a variety of packaging Zetag 8190-AP Super high High sizes. Your Solenis representative will recommend the appropriate packaging for the application. Benefits • Highly effective across a wide range of Important Information applications (e.g., mechanical dewatering and Typical Properties: Refer to the Safety Data Sheet thickening, flotation and clarification). (SDS). • Operation over a wide pH range Regulatory Information: Refer to the SDS/RDS or Product Dosage and Control contact your sales representative for any additional The product dosing varies greatly depending on regulatory and environmental information. different industries and applications. The appropriate product dosage needs to be confirmed based on on- Safety: Solenis maintains an SDS for all of its site experiments and trials. products. Use the health and safety information contained in the SDS to develop appropriate product It is recommended to prepare regularly stock handling procedures to protect your employees and solutions at 0.1% – 0.5% and for maximum effect customers. such solutions should be used within 5 days. Beyond this period some loss in efficiency of the Our SDS should be read and understood by all of product may occur. your supervisory personnel and employees before using Solenis products in your facilities. Effects of low temperature on dissolution – at low water temperatures, < 5°C, the dissolution of this product will be adversely affected to the extent that longer dissolution times will be required.
Product Application Mainly used for the purification of urban and industrial wastewater (sedimentation, clarification, air flotation, and filtration), as well as sludge thickening and dewatering (in dewatering machines such as centrifuges, belt filter presses, and plate and frame filter presses).
