Ba Lasercutter xm1060
Uploaded by
dheyaaBa Lasercutter xm1060
Uploaded by
dheyaaSHENZHEN SIJIAHUA Technology LTD.
Laser Engrave Machine HL-1060 100W Manual
SHENZHEN SIJIAHUA Technology LTD.
Section II. Uncrating HL-100W 1060
1. Uncrating HL-100W 1060
Crate size is on the right. That needs
to lift it from one side and pull out this
machine.
Machine size on the left
Machine front
SHENZHEN SIJIAHUA Technology LTD.
Machine back
Machine control unit
2. Parts & Accessories
SHENZHEN SIJIAHUA Technology LTD.
Section III. Installation & Assembly
1. Connect the Exhaust(Optional part, buy separately)
2. Connect the Water Chiller& Air Compressor
CO2 Laser machines use water cooling laser tubes. Laser technology is such
that the laser tubes generate a lot of excess heat and the tubes must be
cooled for proper operation. Equipment running environment humidity：5%～
95%（free of condensed water）Keep the temperature of the water chiller
between 5℃～40℃
a. Laser Machine Water OUT to Chiller INLET
b. Laser Machine Water IN to Chiller OUTLET
c. Laser Machine Into Air to Air Compressor
SHENZHEN SIJIAHUA Technology LTD.
3. Connect Electrical Power
4. Connecting PC via USB Cable or RJ45 Ethernet Cable
SHENZHEN SIJIAHUA Technology LTD.
5. Remove ties on belts
For transportation safety, ties were implemented to fixed machine belts
avoiding unexpected movement.
SHENZHEN SIJIAHUA Technology LTD.
Section IV. Software
1. RDWorkV8 Installment
Choose "Laser work"
SHENZHEN SIJIAHUA Technology LTD.
Click “Install USB driver”
SHENZHEN SIJIAHUA Technology LTD.
After that, the USB driver have been installed
Then install the software, click “Install”
SHENZHEN SIJIAHUA Technology LTD.
After Installment completed, click ”Exit”
2. RDWorks Interface Briefly
SHENZHEN SIJIAHUA Technology LTD.
Menu Bar：The main function of this software are available through the implementation of
the Menu Bar. Execute the menu command is the most basic mode of operation. Menu Bar
including: Document、Edit、Draw、Setting、Processing、View and Help.
System Bar: On the System Bar, placed some most commonly command buttons which
is chosen from the menu.
Graphics Bar: Graphics property bar is the basic attributes of graphics operations,
including graphic location, size, scale, number processing.
Edit Bar：The Edit Bar default on the left of the work area. In the Edit Bar placed frequently
used tools to make the operation more flexible and convenient.
Align Bar：Alignment of the selected objects。
Layer Bar：Change the layer of the selected objects。
Control Panel：Using the Control Panel to complete laser processing of multiple tasks,
Layer parameter settings, axis control, processing …etc.
File Import
Click menu【File】->【Import】 ，or click icon The following dialog box appears.
Select file, and click【Open】。
Section V. Operations
1. PC Connection Test
Base on plug USB cable to machine. Please check whether there is good
connection between RDC6445 and computer(see below)
Click on setting first then use select USB:Auto connection and Exit.
SHENZHEN SIJIAHUA Technology LTD.
If software didn’t prompt ”communication error”, That means connection is
good.
2. Origin setting& Z height positioning
That you would use focus gauge as below or auto-focus
Focus Gauge and how to
measure as below
SHENZHEN SIJIAHUA Technology LTD.
63.5mm
Auto-focus is a very useful function to align focal length automatically
Press Focus on the RDC6445 Panel to allow machine find focus point
automatically.
SHENZHEN SIJIAHUA Technology LTD.
Once it’s done, move laser head to correct position and press “origin” to tell
laser where to start with.
SHENZHEN SIJIAHUA Technology LTD.
3. Pilot Run Test
First, open file “hellokitty.plt” in RDWorksV8
SHENZHEN SIJIAHUA Technology LTD.
Then choose the parts you want to cutting or engraving marked by the Layer Bar. The
color of object that is the color of the object contour. You can click the color button on the
Layer Bar to change the color of the object has been selected. The color of the pressed
button is the color of current layer.
We want to engrave the ear of the hello kitty. So we marked it as green, and setting the
speed and power, out test material is 5MM acrylic, so we setting the scan mode speed as
300mm/s the power 20%.
we want to engrave the contour of the hello kitty. so i marked it as black. setting cutting
mode. speed 30mm/s power 10%.
SHENZHEN SIJIAHUA Technology LTD.
Last, I will to cutting the frame of the picture. so i marked it as Red. setting cutting mode.
speed 20mm/s, power 30%.
Now the setting of the file is finised, Click "start", the machine will start
working!
SHENZHEN SIJIAHUA Technology LTD.
4. U Disk Operation
UDisk function is very useful function when you start small production without
PC.
a. Insert U disk as shown in blue arrow
b. Click “SaveToUFile” to the U disk
SHENZHEN SIJIAHUA Technology LTD.
c. Press on the panel
d. Move the cursor to Udisk+ by Arrow keys and Enter
SHENZHEN SIJIAHUA Technology LTD.
e. Then move the cursor to Read Udisk file and Enter
f. Select file to copy to mem and press St/Pau to start
Laser machine should work as wanted!
SHENZHEN SIJIAHUA Technology LTD.
Section VI. FAQ
1. Why Machine does not move when power on?
Answer: 1.Check the power cable good connection or not 2.Check the panel paraments if
it is correct
2. Why No laser beam come out?
Answer: Please check laser tube whether physical damage. Water protection switch
break?
3. Why X axis stop unexpected during working?
Answer: Please swap X and Y axis stepper motor. If problem on Y axis, it is damaged
stepper driver.
4. What should I do software prompt ”communication error”?
Answer: If it worked all good but had problem now, please consider change cable.
5. What is problem control panel blinking?
Answer: Please check if anywhere short circuit.
6. How do I do laser head can’t get back to home position?
Answer: Please check home limit switch if works well.
SHENZHEN SIJIAHUA Technology LTD.
Electrical Diagram
