DA3 SMART Update-V1
DA3 SMART Update-V1
Exported on 26/06/2024
Manufactured since 2016 Manufactured since 2016 NV200 Build Revision 30+ Manufactured
since 2017
For more information on obsolete validators that cannot be updated, please visit https://innovative-
technology.com/support/obsolete-product-notifications
Unsupported Validators
SMART Update is not compatible with the NV9 Spectral Range or NV200 Spectral Range.
https://www.dropbox.com/sh/k0s7dn56bzwmelg/AABZ9wiBlt4hsfMvecTq0rcKa?dl=0
Min 2GB SD Card, Class 4. Sandisk, Kingston Technology and Transcend have all been tested. Format
must be FAT32.
There may be Class 10 cards that may not function. Sandisk Extreme has been tested and functions.
• UpdateV2.bin File
• updateST.nv2 File if updating NV200ST or SMART Payout
3 Connect the DA3 to the PC using the Type A to Type B USB Cable and open the DPS software.
Refer to the Product Technical Manual for instructions on how to put the validator into SSP.
4 Press the Blue Play Button on the DA3 to begin the update. The button will turn Green once the update is
complete and the validator will reset.
5 Disconnect the DA3 and re-connect the validator to the host machine.
Update Failures
The Play Button will turn Red if the update is unsuccessful and the BNV MATCH DOWNLOAD LED will blink a
sequence code to describe the fail reason.
Long Short
2 The validator will flash a Yellow and Blue colour sequence during update.
Update Failures
The bezel will go red if the update is unsuccessful.
• Check SD Card Configuration
If the original dataset file no longer exists you will receive this error and the dataset will need to be
changed.