Scribd
Upload
26 views4 pages

HW1 - Group8

Uploaded by

ngọc nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views4 pages

HW1 - Group8

Uploaded by

ngọc nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Exercise 1: Design materials handling equipment for movement the motor

housing from Manufacturing department to Assembly department. (Name


of equipment, the operation of equipment)
Name of equipment: The motor housing
These are some examples of materials handling equipment that could be used for
moving motor housings from the manufacturing department to assembly
department:
- A motorized material handling vehicle is a battery-powered cart that can
transport heavy loads with ease and efficiency. It has a low-deck platform
that allows for easy loading and unloading of motor housings, and it can
be recharged using a common 110V outlet. It also has durable tires that can
withstand sharp metal shards and other debris. A motorized material
handling vehicle can be used to move motor housings from one department
to another without requiring much manual labor or physical strength.

- A monorail system is a type of overhead conveyor that uses a single rail


to suspend and move motor housings along a predefined path. It can be
customized to fit the layout and requirements of the manufacturing and
assembly departments, and it can handle various speeds and capacities. A
monorail system can provide fast and continuous transport of motor
housings without taking up floor space or interfering with other operations.
- A lift truck is a vehicle that has forks or other attachments that can lift,
lower, and move motor housings on pallets or other platforms. It can be
powered by electricity, gas, diesel, or propane and operate in narrow aisles
or tight spaces. A lift truck can load and unload motor housings from trucks
or storage racks and transfer them between different departments.

Exercise 2: Design materials handling equipment for movement the


Drinking water bottles from production factory to the supermarket (Name
of equipment, the operation of equipment)
- Conveyor: First, automated machines place the drinking water bottles onto
the conveyor.The finished drinking water bottles will be loaded onto the
conveyor system at an infeed station located in the manufacturing facility.
Then, the bottles are transported via a continuous conveyor belt. To
maintain cleanliness and safety, the conveyor might be manufactured of
materials suitable for use in food.
-
- Packaging equipment: a system that makes sure the bottles are positioned
correctly for packaging can be built into the conveyor depending on the
shape and design of the bottles. Next, a quality check station might be
positioned along the conveyor path. Here, automated sensors can inspect
the bottles for any defects or contamination. Additionally, the bottles can
be routed to the packaging section at the end of the conveyor belt. Some
bottles are packed directly into suitable cartons. Others are packaged in
batches of about 6 bottles. The packaging processes are all carried out using
automatic packaging machines (robots). It determines the given quantity
and arranges the bottles in the correct position in the cartons.
-
- Forklifts, conveyor systems, or other equipment: they can load the
bottled water onto trucks or other transport vehicles for delivery to the
supermarket.
-
- Transport vehicles: such as trucks or other vehicles are fully equipped
and meet the conditions for storage and safety of products on the way to
the supermarket.
-
- At the supermarket, a set of conveyor and forklift systems can be used to
unload the bottles from the delivery vehicles and place them in the store's
storage area or directly on shelves for customer access.

You might also like