SCHEDULE OF LOADS FOR UNIT-A SECOND FLOOR SCHEDULE OF LOADS FOR UNIT-B SECOND FLOOR

SERVICE VOLTAGE: 230, 1ɸ-AN, 60Hz SERVICE VOLTAGE: 230, 1ɸ-AN, 60Hz

SIZE OF C.B. VOLTAGE DROP PERCENTAGE SIZE OF C.B. VOLTAGE DROP PERCENTAGE
CKT. LOAD VOLTAGE DROP
[(VD/230)*100%] REMARKS CKT. LOAD VOLTAGE DROP
[(VD/230)*100%] REMARKS
SIZE OF WIRE & CONDUIT VA VOLTS AMPERE G*H*I*1 (L-N) SIZE OF WIRE & CONDUIT VA VOLTS AMPERE G*H*I*1 (L-N)
NO DESCRIPTION (1% MAXIMUM) NO DESCRIPTION (1% MAXIMUM)
P AT P AT
2 2 2 2
2-2.0 mm THW + 1-2.0 mm TW (G) / 2-2.0 mm THW + 1-2.0 mm TW (G) /
1 LIGHTING OUTLET 640 230 2.78 2 15 0.43 0.1867 Cable is properly sized 1 LIGHTING OUTLET 640 230 2.78 2 15 0.43 0.1867 Cable is properly sized
5HP MOTOR CALCULATION 16 mm, Ø PVC 16 mm, Ø PVC
2-2.0 mm2 THW + 1-2.0 mm2 TW (G) / 2-2.0 mm2 THW + 1-2.0 mm2 TW (G) /
2 LIGHTING OUTLET 600 230 2.61 2 15 0.35 0.1519 Cable is properly sized 2 LIGHTING OUTLET 600 230 2.61 2 15 0.35 0.1519 Cable is properly sized
5 HP * 746 WATT/HP = 3720 W 16 mm, Ø PVC 16 mm, Ø PVC
2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized
3 CONVENIENCE OUTLET
16 mm, Ø PVC
1440 230 6.26 2 20 0.57 0.2474 3 CONVENIENCE OUTLET
16 mm, Ø PVC
1440 230 6.26 2 20 0.57 0.2474
IMOTOR = P/(V * n * PF)
2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) /
= 3720/(230 * 0.85 * 0.8) 4 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.34 0.1464 Cable is properly sized 4 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.34 0.1464 Cable is properly sized
= 23.85 A
2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized
5 0.75 HP ACU 16 mm, Ø PVC
1587 230 6.90 2 30 0.25 0.1098 5 0.75 HP ACU 16 mm, Ø PVC
1587 230 6.90 2 30 0.25 0.1098

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) /
Breaker Size (Ampere Trip) 6 WATER HEATER 16 mm, Ø PVC 3000 230 13.04 2 30 0.58 0.2536 Cable is properly sized 6 WATER HEATER 16 mm, Ø PVC 3000 230 13.04 2 30 0.58 0.2536 Cable is properly sized

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) /
5000 21.74 0.53 Cable is properly sized 5000 21.74 0.53 Cable is properly sized
Breaker Size = 1.25 * IMOTOR 7 STOVE AND RANGE 16 mm, Ø PVC 230 2 30 0.2306 7 STOVE AND RANGE 16 mm, Ø PVC 230 2 30 0.2306
= 1.25 * 23.85 A 2-3.5 mm2 THW + 1-3.5 mm2TW (G) / 2-3.5 mm2 THW + 1-3.5 mm2TW (G) /
Cable is properly sized Cable is properly sized
= 29.8 A 8 EMERGENCY CIRCUIT 16 mm, Ø PVC 940 230 4.09 2 20 0.29 0.1270 8 EMERGENCY CIRCUIT 16 mm, Ø PVC 940 230 4.09 2 20 0.29 0.1270

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized
9 5HP MOTOR 5485.5 230 23.85 2 30 1.26 0.5481 9 5HP MOTOR 5485.5 230 23.85 2 30 1.26 0.5481
Therefore, use 30 A breaker 16 mm, Ø PVC 16 mm, Ø PVC

SPARE 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / 2300 Cable is properly sized SPARE 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / 2300 Cable is properly sized
10 230 10.00 2 20 1.30 0.5645 10 230 10.00 2 20 1.30 0.5645
16 mm, Ø PVC 16 mm, Ø PVC
2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) /
10 SPARE 16 mm, Ø PVC 2300 230 10.00 2 20 1.30 0.5645
Cable is properly sized 10 SPARE 16 mm, Ø PVC 2300 230 10.00 2 20 1.30 0.5645
Cable is properly sized

SUB-FEEDER CONDUCTOR 2-38 mm2 THW + 1-14 mm2 TW (G) / SUB-FEEDER CONDUCTOR 2-38 mm2 THW + 1-14 mm2 TW (G) /
22006.4 230 95.68 2 125 22006.4 230 95.68 2 125
AND OVERCURRENT DEVICE 33 mm, Ø RMC AND OVERCURRENT DEVICE 33 mm, Ø RMC

For Feeder Conductor For Main Current Protection Device For Feeder Conductor For Main Current Protection Device
IFEEDER = (125%)(highest current) +Other motors + Other load IMAIN = (IOCPD rating of the highest rated motor ) + Ilighting and appliance IFEEDER = (125%)(highest current) +Other motors + Other load IMAIN = (IOCPD rating of the highest rated motor ) + Ilighting and appliance
IFEEDER = (1.25)(23.85) + 11.65 + 6.9 + 6.9 + 17.38 + 13.04 + 10 load + Iother motors IFEEDER = (1.25)(23.85) + 11.65 + 6.9 + 6.9 + 17.38 + 13.04 + 10 load + Iother motors
IFEEDER = 95.68 A IMAIN = 30 + 11.65 + 6.9 + 17.38+ 13.04 + 10 IFEEDER = 95.68 A IMAIN = 30 + 11.65 + 6.9 + 17.38+ 13.04 + 10
IMAIN = 88.97 A IMAIN = 88.97 A
Therefore: use 2-38 mm2 THHN + 1-14 mm2 TW (G) / 33 mm ø RMC Therefore: use 2-38 mm2 THHN + 1-14 mm2 TW (G) / 33 mm ø RMC
Therefore: use 125 AT, 230V, 2 Pole, 60 Hz Circuit Breaker Therefore: use 125 AT, 230V, 2 Pole, 60 Hz Circuit Breaker

SCHEDULE OF LOADS FOR UNIT-C SECOND FLOOR SCHEDULE OF LOADS FOR UNIT-D SECOND FLOOR

SERVICE VOLTAGE: 230, 1ɸ-AN, 60Hz SERVICE VOLTAGE: 230, 1ɸ-AN, 60Hz

SIZE OF C.B. VOLTAGE DROP PERCENTAGE SIZE OF C.B. VOLTAGE DROP PERCENTAGE
CKT. LOAD VOLTAGE DROP
[(VD/230)*100%] REMARKS CKT. LOAD VOLTAGE DROP
[(VD/230)*100%] REMARKS
SIZE OF WIRE & CONDUIT VA VOLTS AMPERE G*H*I*1 (L-N) SIZE OF WIRE & CONDUIT VA VOLTS AMPERE G*H*I*1 (L-N)
NO DESCRIPTION (1% MAXIMUM) NO DESCRIPTION (1% MAXIMUM)
P AT P AT
2-2.0 mm2 THW + 1-2.0 mm2 TW (G) / 2-2.0 mm2 THW + 1-2.0 mm2 TW (G) /
1 LIGHTING OUTLET
16 mm, Ø PVC
640 230 2.78 2 15 0.43 0.1867 Cable is properly sized 1 LIGHTING OUTLET
16 mm, Ø PVC
640 230 2.78 2 15 0.43 0.1867 Cable is properly sized

2-2.0 mm2 THW + 1-2.0 mm2 TW (G) / 2-2.0 mm2 THW + 1-2.0 mm2 TW (G) /
2 LIGHTING OUTLET 600 230 2.61 2 15 0.35 0.1519 Cable is properly sized 2 LIGHTING OUTLET 600 230 2.61 2 15 0.35 0.1519 Cable is properly sized
16 mm, Ø PVC 16 mm, Ø PVC
2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized
3 CONVENIENCE OUTLET
16 mm, Ø PVC
1440 230 6.26 2 20 0.57 0.2474 3 CONVENIENCE OUTLET
16 mm, Ø PVC
1440 230 6.26 2 20 0.57 0.2474

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized
4 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.34 0.1464 4 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.34 0.1464

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / Cable is properly sized
5 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.25 0.1098 5 0.75 HP ACU 16 mm, Ø PVC 1587 230 6.90 2 30 0.25 0.1098

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) /
6 WATER HEATER 16 mm, Ø PVC 3000 230 13.04 2 30 0.58 0.2536 Cable is properly sized 6 WATER HEATER 16 mm, Ø PVC 3000 230 13.04 2 30 0.58 0.2536 Cable is properly sized

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) /
STOVE AND RANGE 5000 21.74 30 0.53 Cable is properly sized STOVE AND RANGE 5000 21.74 30 0.53 Cable is properly sized
7 16 mm, Ø PVC 230 2 0.2306 7 16 mm, Ø PVC 230 2 0.2306

2-3.5 mm2 THW + 1-3.5 mm2TW (G) / Cable is properly sized 2-3.5 mm2 THW + 1-3.5 mm2TW (G) / Cable is properly sized
8 EMERGENCY CIRCUIT 16 mm, Ø PVC 940 230 4.09 2 20 0.29 0.1270 8 EMERGENCY CIRCUIT 16 mm, Ø PVC 940 230 4.09 2 20 0.29 0.1270

2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 23.85 Cable is properly sized 2-5.5 mm2 THW + 1-5.5 mm2 TW (G) / 23.85 Cable is properly sized
9 5HP MOTOR 5485.5 230 2 30 1.26 0.5481 9 5HP MOTOR 5485.5 230 2 30 1.26 0.5481
16 mm, Ø PVC 16 mm, Ø PVC

SPARE 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized SPARE 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / Cable is properly sized
10 2300 230 10.00 2 20 1.30 0.5645 10 2300 230 10.00 2 20 1.30 0.5645
16 mm, Ø PVC 16 mm, Ø PVC
2-3.5 mm2 THW + 1-3.5 mm2 TW (G) / 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) /
10 SPARE 16 mm, Ø PVC 2300 230 10.00 2 20 1.30 0.5645
Cable is properly sized 10 SPARE 16 mm, Ø PVC 2300 230 10.00 2 20 1.30 0.5645
Cable is properly sized

SUB-FEEDER CONDUCTOR 2-38 mm2 THW + 1-14 mm2 TW (G) / SUB-FEEDER CONDUCTOR 2-38 mm2 THW + 1-14 mm2 TW (G) /
22006.4 230 95.68 2 125 22006.4 230 95.68 2 125
AND OVERCURRENT DEVICE 33 mm, Ø RMC AND OVERCURRENT DEVICE 33 mm, Ø RMC

For Feeder Conductor For Main Current Protection Device For Feeder Conductor For Main Current Protection Device
IFEEDER = (125%)(highest current) +Other motors + Other load IMAIN = (IOCPD rating of the highest rated motor ) + Ilighting and appliance IFEEDER = (125%)(highest current) +Other motors + Other load IMAIN = (IOCPD rating of the highest rated motor ) + Ilighting and appliance
IFEEDER = (1.25)(23.85) + 11.65 + 6.9 + 6.9 + 17.38 + 13.04 + 10 load + Iother motors IFEEDER = (1.25)(23.85) + 11.65 + 6.9 + 6.9 + 17.38 + 13.04 + 10 load + Iother motors
IFEEDER = 95.68 A IMAIN = 30 + 11.65 + 6.9 + 17.38+ 13.04 + 10 IFEEDER = 95.68 A IMAIN = 30 + 11.65 + 6.9 + 17.38+ 13.04 + 10
IMAIN = 88.97 A IMAIN = 88.97 A
Therefore: use 2-38 mm2 THHN + 1-14 mm2 TW (G) / 33 mm ø RMC Therefore: use 2-38 mm2 THHN + 1-14 mm2 TW (G) / 33 mm ø RMC
Therefore: use 125 AT, 230V, 2 Pole, 60 Hz Circuit Breaker Therefore: use 125 AT, 230V, 2 Pole, 60 Hz Circuit Breaker

SCHEDULE OF LOADS FOR SECOND FLOOR

SCHEDULE OF LOADS FOR ADMIN SERVICE VOLTAGE: 400Y/230, 3ɸ-ABC, 60Hz

SERVICE VOLTAGE: 230, 1ɸ-CN, 60Hz CKT. LOAD

SIZE OF WIRE & CONDUIT
AMPERE SIZE OF C.B. VOLTAGE DROP
VOLTAGE DROP PERCENTAGE
[(VD/230)*100%] REMARKS
NO VA VOLTS G*H*I*1 (L-N)
DESCRIPTION (1% MAXIMUM)
VOLTAGE DROP AN BN CN P AT
CKT. LOAD SIZE OF C.B. VOLTAGE DROP PERCENTAGE 2 2
SIZE OF WIRE & CONDUIT VA VOLTS AMPERE G*H*I*1 (L-N) [(VD/230)*100%] REMARKS 1 UNIT A 2 2-38 mm THHN + 1-14 mm TW (G) /
22006.4 230 95.68 2 125 1.56 0.6763 Cable is properly sized
NO DESCRIPTION (1% MAXIMUM)
33 mm ø RMC
P AT 2 2-38 mm2 THHN + 1-14 mm2 TW (G) / 22006.4 230 95.68 2 125 0.75 0.3265 Cable is properly sized
UNIT B 2
33 mm ø RMC
2-2.0 mm2 THW + 1-2.0 mm2 TW (G) 1.88 0.8174
Cable is properly sized 2-38 mm2 THHN + 1-14 mm2 TW (G) / 1.61 0.6996
1 LIGHTING OUTLET 1200 230 5.22 2 15 3 UNIT C 2 22006.4 230 95.68 2 125 Cable is properly sized
/ 16 mm, Ø PVC 33 mm ø RMC

4 UNIT D 2 2-38 mm2 THHN + 1-14 mm2 TW (G) / 22006.4 95.68 125 0.80 0.3498
230 2 Cable is properly sized
2 2 33 mm ø RMC
2-2.0 mm THW + 1-2.0 mm TW (G)
2 700 230 3.04 2 15 0.25 0.1089 Cable is properly sized 2-3.5 mm2 THHN + 1-3.5 mm2 TW (G) /
LIGHTING OUTLET / 16 mm, Ø PVC 5 230 10.00 2 20 2.27 0.9879
SPARE
2
16 mm ø RMC
2
2300 Cable is properly sized For Feeder Conductor
2-3.5 mm THHN + 1-3.5 mm TW (G) / 2.27
6 SPARE 16 mm ø RMC 2300 230 10.00 2 20 0.9879 Cable is properly sized
2-2.0 mm2 THW + 1-2.0 mm2 TW (G) 1.48
3 EMERGENCY LIGHT
/ 16 mm, Ø PVC 1000 230 4.35 2 15 0.6422
2-3.5 mm2 THHN + 1-3.5 mm2 TW (G) /
IAN= highest phase current
Cable is properly sized ADMIN 230 0.57 Cable is properly sized
7 16 mm ø RMC 2900 12.61 2 20 0.2491 IAN= 191.68 A

SUB-FEEDER CONDUCTOR 2-3.5 mm2 THW + 1-3.5 mm2 TW (G) 2900 230 20 MAINFEEDER CONDUCTOR 4-125 mm2 THHN + 1-22 mm2 TW (G) / Use: 4-125 mm2 THHN + 1-22 mm2 TW (G) / 78 mm
12.61 2 95525.6 400 191.36 115.68 108.29 3 250
AND OVERCURRENT DEVICE / 16 mm, Ø PVC AND OVERCURRENT DEVICE 78 mm ø RMC
RMC
Use: 250 AT, 400 V, 3 Pole, 60 Hz Circuit Breaker

SIGNED AND SEALED BY; PROJECT TITLE: PROJECT OWNER: SHEET CONTENTS: PRC No. SHEET NO.:
SCHEDULE OF LOADS: O.R No.
PROPOSED ELECTRICAL SYSTEM DESIGN OF HIGH RISE KIM SOO HYUN
BSEE4A: GROUP 2 RESIDENTIAL BUILDING
SECOND FLOOR
PTR No. 6/8
PROFESSIONAL ELECTRICAL ENGINEER LOCATION : POBLACION, MAMBAJAO, CAMIGUIN ADDRESS: POBLACION, MAMBAJAO, CAMIGUIN SCALE: 1:100 PRC No.