Scribd
Upload
73 views2 pages

Electronics II 2023 Ex2

fxxkncuu

Uploaded by

柯彥宇
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views2 pages

Electronics II 2023 Ex2

fxxkncuu

Uploaded by

柯彥宇
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Electronics II, Exam-2, Spring 2023

Department of Communication Engineering, National Central University


April 14, 2023, Prof. Dah-Chung Chang (E1-311)

1. (25%) Consider the following instrumentation


amplifier.
(a) Assume that R4 / R3 = R6 / R5 . Find vO in
relation of v I 1 and v I 2 . (10%)
(b) Assume that R2 / R1 = 1 , R4 / R3 = 10 ,
and R6 / R5 = 12 . Determine CMRR(dB). (15%)

2. (25%) Let the semiconductor parameter for the transistor be VT = 0.026V . Derive the
following result

v R 
vO = 0.4329 ln  2 1  .
 v1 R2 

1
3. (20%) The output of the voltage reference circuit is 10V. Use a Zener diode with a
breakdown voltage of 6V. Assume that the Zener diode is biased at the current range of 1 mA
to 1.5mA and the PN diode cut-in voltage is 0.6V. The resistor parameters
are R3 = 10 K and R4 = 30 K .
(a) Find the ratio of R2 / R1 and the value of R F . (10%)
(b) Find the possible current values supplied by V S . (10%)

4. (20%)

Determine
(a) the maximum power dissipation in a transistor, with and without the heat sink. (10%)
(b) the temperature of the transistor case and heat sink. (10%)

5. (10%) For the common-emitter output stage shown on the


right, let VCC = 12 V and RL = 1 kΩ. Assume the transistor
Q-point is in the center of the load line. Assume the
sinusoidal output voltage is limited to a 9 V peak-to-peak
value. Determine the power conversion efficiency.

You might also like