Scribd
Upload
30 views17 pages

Electronics Lab 2

Electronics Lab 2

Uploaded by

mhmdrmdanslahslah3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views17 pages

Electronics Lab 2

Electronics Lab 2

Uploaded by

mhmdrmdanslahslah3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

Electronics Lab

By

Dr. Mohamed Hany Mahmoud


( Teaching Assistant Faculty of Computers and
Artificial Intelligence Fayoum University )

E.mail: [email protected]
Lab Contents
1. Electronic circuits basics
2. DC circuits analysis
3. AC circuits analysis
4. AC Capacitor circuits
5. Capacitor Applications (Filters)
6. Diodes and their applications (Rectifier)
7. BJT transistors and their applications
Lab 2
Objectives
1- Verification of Kirchhoff’s current and voltage laws.
2- Verification Voltage Dividers
3- Verification of Thevenin’s Theorem
Kirchhoff’s Laws

Kirchhoff’s Current Law


At any point (junction) in an electric circuit, the sum of
currents flowing into that node is equal to the sum of
currents flowing out of it.
node
Kirchhoff’s Laws
Kirchhoff’s Voltage Law
In any closed circuit, the summation of voltage sources (EMF)
equals the summation of voltage drops

Voltage drop is the voltage difference across a resistor’s


terminals
V1

Vs V2
VS = V 1 + V 2
Common DC Circuit Terms:
• Circuit – a circuit is a closed loop conducting path in which an electrical current flows.
• Path – a single line of connecting elements or sources.
• Node – a node is a junction, connection or terminal within a circuit were two or more circuit elements
are connected or joined together giving a connection point between two or more branches. A node is
indicated by a dot.
• Branch – a branch is a single or group of components such as resistors or a source which are connected
between two nodes.
• Loop – a loop is a simple closed path in a circuit in which no circuit element or node is encountered
more than once.

A Typical DC Circuit
Voltage Dividers
• An electronic circuit that accepts a certain voltage input and
produces a fraction of that input voltage as the output
• The same current I flows through R1 and R2
I

R1
• The output voltage
Vin

R2 Vout
Thevenin’s Theorem
• Thevenin theorem is an analytical method used to change a
complex circuit into a simple equivalent circuit consisting of
a single resistance in series with a voltage source.

RTH

VTH
Required Equipment
• Breadboard
• 5V Power Supply
• Resistors
• Ammeter and voltmeter
Kirchhoff’s Laws

Circuit 1
I = ??? R2
330 Ohm

V3 = ???
R1
330 Ohm
Circuit 2

V3 = ???

I1 = ???
Circuit 3
R3
330 Ohm

I3 = ???
V2 = ???
Voltage divider

Circuit 4
V1 = ???

I = ???
Thevenin’s theorem
Circuit 5

VL = ??? IL = ???
Circuit 6

VL = ??? IL = ???
R1
330 Ohm
Thank
You

You might also like