Scribd
Upload
89 views19 pages

Electronics Lab 1

electronics 1

Uploaded by

mhmdrmdanslahslah3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views19 pages

Electronics Lab 1

electronics 1

Uploaded by

mhmdrmdanslahslah3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

Electronics Lab

By

Mohamed Hany Mahmoud


( Teaching Assistant Faculty of Computers and Artificial Intelligence
Fayoum University )

E.mail: [email protected]

2023 - 2024
Lab Contents
1. Electronic circuits basics
2. DC circuits analysis
3. AC circuits analysis
4. AC Capacitor circuits
5. Capacitor Applications (Filters)
6. Diodes and their applications (Rectifier)
7. BJT transistors and their applications
Lab 1
Objectives
1- Using a breadboard.
2- Become familiar with the use of a digital Voltmeter and
Ammeter to measure DC voltage and current.
3- Construct a simple circuit with a LED.
4- Test the validity of Ohm’s law.
Required Equipment

• Breadboard
• 5V Power Supply
• Resistors
• Ammeter and Voltmeter
• Light-emitting diode (LED)
Electric Circuit (2D)
Electric Circuit (3D)
Breadboard
Breadboard

• A breadboard is used for prototyping circuits without the need


for solder.
• It has many holes that electrical components can be plugged
into and connect with other components.
• The holes are configured in rows and/or columns, and certain
holes are “wired” to each other by conductors under the holes.
How it Works
• The heart of the solderless breadboard is a small metal clip
that looks like this:

• The clip is made of nickel silver.


Light Emitting Diode (LED)

drop
Resistor Code
Digital Multimeter (DMM)

The Digital Multimeter (DMM) can be


used to measure many electric circuit
variables: dc voltage, dc current, ac
voltage, ac current, resistance,
frequency, and capacitance.
Ohm’s Law

Current flow is proportional to voltage


(voltage increases current increases)
Current flow is inversely proportional to resistance
(resistance increases current decreases)

𝑽 = 𝑰𝑹
Volts (V) Ampere (A) Ohm (Ω)
Practical Circuits
Circuit 1 I1 = ???

V1 = ???

Theoretical Practical
I1
V1
I1 = 0.005 A =5 mA V1 = 5 – 2.2 = 2.8 v
Circuit 2 I2 = ???

V2 = ???

Theoretical Practical
I2
V2

I2 = 0.022 A =22 mA V2 = 5 v
Circuit 3 I3 = ???

V3 = ???

Theoretical Practical
I3
V3

I3 = 0.0037 A =3.7 mA V3 = 1.2 v


Circuit 4
I4 = ???
• Theoretical
• Practical
• I1
• V1

• Theoretical V4 = ???
• Practical
• I1
• V1

Theoretical Practical
I4
V4

I4 = 0.015 A =15 mA V4 = 5 v
Thank You

You might also like