GRUNDFOS DATA BOOKLET

CM10-2 A-R-A-E-AVBE C-A-A-N

Grundfos pump 96935481

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/CMBASIS/96935481/CM10-2-A-R-A-E-AVBE.html

[email protected]
tel. +31 152 610 900
fax. +31 152 616 289

BE > THINK > INNOVATE

 Position Qty. Description
1 CM10-2 A-R-A-E-AVBE

Product No.: On request

Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial
discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge
parts are made of cast iron. The mechanical shaft seal is a special designed, unbalanced O-ring seal.
Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).

The pump is fitted with a 1-phase, foot-mounted, fan-cooled asynchronous motor.

Further product details

Pump and motor are integrated in a compact and user-friendly design. The pump is fitted to a low base
plate, making it ideal for installation in systems where compactness is important.
The state-of-the-art design and materials of the shaft seal ensure high wear resistance, improved
sticking and dry-running capabilities and long operating life.
Servicing the pump requires no special service tools. Service parts are in stock for quick delivery and
are available as kits, single parts or bulk. Service videos are available on www.youtube.com.

Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the
impeller spacing pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from
the pump side. The inlet part, chambers and discharge part are hold together by four staybolts.

The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed
seal driver ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.
Primary seal:
• Rotating seal ring material: aluminium oxide (alumina)
• Stationary seat material: carbon graphite, resin-impregnated
Carbon graphite against alumina is a good all-round seal for not too demanding applications. The
corrosion resistance is often limited in water to a range between pH 5 and pH 10. Usage in liquids
above 90 °C is not recommended. The seal can handle dry-running conditions for short periods.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be
dismantled.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical
tolerances comply with EN 60034.

The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with
IEC 60034-11 and requires no further motor protection. The protection reacts to both slow- and
quick-rising temperatures, e.g. constant overload and stalled conditions.
As the thermal protection incorporates automatic reset, the motor must be connected in a way which
ensures that the automatic reset cannot cause accidents.

Technical data

Printed from Grundfos Product Centre [2018.06.003] 1/10

 Position Qty. Description
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 90 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³

Technical:
Rated flow: 10 m³/h
Rated head: 27.1 m
Primary shaft seal: AVBE
Approvals on nameplate: CE,WRAS,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B

Materials:
Pump housing: Cast iron
EN-JL1030
ASTM 30 B
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Rubber: EPDM

Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 6 bar / 90 °C
10 bar / 40 °C
Flange standard: WHITWORTH THREAD RP
Pump inlet: Rp 1 1/2
Pump outlet: Rp 1 1/2

Electrical data:
Motor type: 90SA
Rated power - P2: 1.3 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-240 V
Service factor: 1
Rated current: 8.4-8.0 A
Starting current: 340 %
Rated speed: 2710-2710 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F

Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight: 29.8 kg
Gross weight: 32.3 kg

Printed from Grundfos Product Centre [2018.06.003] 2/10

 On request CM10-2 A-R-A-E-AVBE 50 Hz
H CM10-2, 1*220 V, 50Hz eta
[m] [%]

35

30

25 100

20 80

15 60

10 40

5 20

0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Q [m³/h]
P NPSH
[kW] [m]

1.5 15
P1

1.0 P2 10

0.5 5

0.0 0

Printed from Grundfos Product Centre [2018.06.003] 3/10

 H CM10-2, 1*220 V, 50Hz eta
Description Value [m] [%]
General information:
35
Product name: CM10-2 A-R-A-E-AVBE
Product No: On request
EAN number: On request 30
Technical:
Rated flow: 10 m³/h
25 100
Rated head: 27.1 m
Impellers: 2
Primary shaft seal: AVBE 20 80
Approvals on nameplate: CE,WRAS,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B
15 60
Pump version: A
Model: A
Materials: 10 40
Pump housing: Cast iron
EN-JL1030
5 20
ASTM 30 B
Impeller: Stainless steel
DIN W.-Nr. 1.4301 0 0
0 2 4 6 8 10 12 Q [m³/h]
AISI 304
P NPSH
Material code: A [kW] [m]
Rubber: EPDM
Code for rubber: E 1.5 P1 15

Installation:
Maximum ambient temperature: 55 °C
1.0 P2 10
Maximum operating pressure: 10 bar
Max pressure at stated temp: 6 bar / 90 °C
238.5

241.8

420.7

199
160
174
189
170
140

12

Rp 1
3/8
1/2

Rp 1 1/2 190.4
97.2
91.8
231.7

323.5

10 bar / 40 °C 0.5 5
Flange standard: WHITWORTH THREAD RP
Pump inlet: Rp 1 1/2
0.0 0
Pump outlet: Rp 1 1/2
Connect code: R
Liquid: 323.5
Pumped liquid: Water 231.7 91.8 97.2

Liquid temperature range: -20 .. 90 °C 190.4 Rp 1 1/2

Liquid temperature during operation: 20 °C

Density: 998.2 kg/m³ Rp 1 1/2
241.8

Rp 3/8
238.5

Electrical data:
12
100

Motor type: 90SA

Rated power - P2: 1.3 kW 160 140 189
Mains frequency: 50 Hz 199 170 174
420.7
Rated voltage: 1 x 220-240 V
Service factor: 1
Rated current: 8.4-8.0 A
Starting current: 340 %
Rated speed: 2710-2710 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: TP211
Others:
Minimum efficiency index, MEI ≥: 0.7
BLACK

YELLOW

Net weight: 29.8 kg

Gross weight: 32.3 kg

W2 U2 V2
MAIN
AUX

U1 V1 W1 L
BROWN

N
BLUE

3
2 1

Printed from Grundfos Product Centre [2018.06.003] 4/10

 On request CM10-2 A-R-A-E-AVBE 50 Hz
cos phi CM10-2 + 90SA 1.3 kW 1*220 V, 50 Hz, SF = 1 I
eta [A]

cos phi

0.8 8

eta

0.6 6

0.4 4

0.2 2

0.0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 P2 [kW]
n P1
[rpm] [kW]
P1

2800 1.6
n

2600 1.2

2400 0.8

2200 0.4

2000 0.0

Printed from Grundfos Product Centre [2018.06.003] 5/10

 On request CM10-2 A-R-A-E-AVBE 50 Hz

Rp 1 1/2
Rp 1 1/2
91.8 97.2

174
189

420.7
323.5

140
170
231.7

238.5

241.8
100
190.4

160
199
Rp 3/8

12

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2018.06.003] 6/10

 Exploded view

251a

251d

77
28
7
7a 17

301a 219

92 301a

11
92
9

51

11b

105

215a
100
215
49
18
66a
45
67

530a
530

215a 217

6
531a
531
534
534a

Printed from Grundfos Product Centre [2018.06.003] 7/10

 Sectional drawing (TM058200 for TPE2,TPE3)

3 2 1

TM058200
Printed from Grundfos Product Centre [2018.06.003] 8/10
 Exploded view ( TM057026 for MGE model H/I )

251d

251b

291
290

287
277a
287a 273b
293 502

277

252a 286

273a

273

266
275a
268
268a
289a
289

251a 288b
288
288a

252b

159e

150
152
151

157 156
156c
158

185
154
178
172

187
153 191
188
156d

156b
192
156c

159d

Printed from Grundfos Product Centre [2018.06.003] 9/10

 Parts list CM10-2, Product No. On request
Valid from 2.7.2009 (0927)

Pos Description Annotation Données de classification Référence Quantité Unité

MG90SA 1 pcs
Cross recess countersunk screw 4 pcs
2 Discharge 1 pcs
- 4 Chamber 1 pcs
Retainer for seal ring 1
Guide vane 10
Front plate 1
3a Intermediate chamber 1
45 Seal ring 1
65 Neck ring retainer 1
- 6 Inlet part cpl. 1 pcs
6 Inlet part cpl. 1
45 Seal ring 1
65 Neck ring retainer 1
- 25 Drain plug cpl. 2 pcs
11 O-ring Diameter: 18,5 1
Material type: EPDM
Thickness: 2
25 Plug 1
26 Hex socket head cap screw Length (mm): 40 4 pcs
Thread: M08
26 Hex socket head cap screw Length (mm): 80 2 pcs
Thread: M8
36 Lock nut Thread: M8 1 pcs
49 Impeller cpl. 2 pcs
51 Pump shaft Diameter: D16 1 pcs
64 Spacing pipe 1 pcs
64.a Spacing pipe 1 pcs
64.c Clamp 1 pcs
66 Wedge lock washer 1 pcs
76 Nameplate 2 pcs
- 105 Shaft seal 1 pcs
102 O-ring Diameter: 22,00 1
Material type: EPDM
Thickness: 2,75
103 Seal ring, stationary 1
104 Seal ring, rotating 1
107 O-ring Diameter: 15.5 1
Material type: EPDM
Thickness: 3.18
108 Compression spring 1
111 Retainer 1
112 Driver for shaft seal 1
111.a Stop ring 1 pcs
139.b Gasket Internal diameter: D139 1 pcs
Outer diameter: D146,5
139.c Gasket 1 pcs
151 Fan cover 1 pcs
152 Pan head thread forming screw 4 pcs
156 Fan 1 pcs
191 Foot 1 pcs

Printed from Grundfos Product Centre [2018.06.003] 10/10

Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]
https://www.lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289