MK @MSITStore C Intelect INSITE FIS FIS3666259.Chm HTML 72-Frr

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Engine Oil Pressure Low - Warning Page 1 of 1

:
FAULT CODE 143
Engine Oil Pressure Low - Warning
Overview

CODE REASON EFFECT

Fault Code: 143 Engine Oil Pressure Low - Warning. Engine Progressive power derate
PID: P100 oil pressure signal indicates engine oil increasing in severity from
SPN: 100 pressure is below the engine protection time of alert.
FMI: 1/18 warning limit.
LAMP: Amber
SRT:

Engine Oil Pressure

Circuit Description

The engine oil pressure and engine temperature sensors are used by the electronic control
module (ECM) to monitor the lubricating oil pressure. The ECM monitors the voltage on the signal
pin and converts this to a pressure value. The oil pressure value is used by the ECM for the
engine protection system.

Component Location

The engine oil pressure and engine temperature sensors are located on the cylinder block to the
left of the fuel filter, behind the air compressor. See Section E for a detailed component location
view.

Refer to Troubleshooting Fault Code t05-143.

Last Modified: 26-Oct-2010

Copyright © 2000-2009 Cummins Inc. All rights reserved.

mk:@MSITStore:C:\Intelect\INSITE\FIS\FIS3666259.chm::/html/72-fc143.htm 5/5/2022

You might also like