lizer

HH4 alcohol tester Quick User Guides

Passive Testing Mouthpiece Testing
1 2 3 4 1 2 3 4
Mouthpiece
Inlet

50mm
Blow

Test Test
key key

It is recommended the Press the Test key – If using pressure activated The device will analyse, The subject is not Attach an *Alcolizer Instruct the subject to A green screen with
subject not consume the screen will display passive, instruct the emit a long beep, and to consume food, approved mouthpiece. take a deep breath and “0.000g/210L” BrAC
food, drink “Please Wait” then donor to blow into then display a text drink or smoke blow gently into the indicates that alcohol
Press the Test key –
or smoke 15 “Ready for passive Test”. the device until you based result. 15 minutes mouthpiece until you tell is not detected.
the screen will display
minutes prior tell them to stop. The prior to them to stop.
Hold the instrument A green screen with “Please Wait” then A yellow screen with
to taking a test. device will take a sample taking a test.
50mm - 100mm in front “Pass No Alcohol” “Blow”. You will hear a sequence numerical BrAC indicates
automatically. If using
Press the Test key “ ” of the subject’s mouth text indicates alcohol Press the Test key of beeps, a click then that alcohol is present
button activated passive, Hold the breathalyser
to turn the HH4 so that the subject is is not detected. “ ” to turn the HH4 a long beep to indicate but under the pre-
instruct the subject to in front of the subject’s
Alcohol Tester on. breathing or talking Alcohol Tester on. the test is complete. configured threshold
count from 20 onwards in A red screen with mouth so that the
directly into the device’s Ensure the test type BrAC level.
Ensure the test type a one second rhythm until “Warning Alcohol subject can blow into the Tell the subject to stop
inlet. is set to “Standard”
is set to “Passive Std” you tell them to stop. Detected” text indicates mouthpiece. blowing. A red screen with
(with mouthpiece).
(no mouthpiece). While they are counting, alcohol is detected. numerical BrAC indicates
The device will analyse
press the Test key. A “press to test” that alcohol is detected
A “press passive test” In the latter case, the and then display a
message will display. and is over locally
message will display. You will hear 3 clicks. device automatically colour coded numerical
switches to a mouthpiece BrAC result. accepted BrAC levels.
Tell the subject to stop
blowing or counting “Standard” test displaying
after the 3rd click. “press for active test”.

World-class Alcohol and Drug testing solutions • Operate an Alcolizer HH4 Alcohol Tester in accordance with applicable regulations, policies and standards.
Phone: 1300 789 908
• Completion of Alcolizer Certified training is recommended prior to use.
Email: [email protected]
www.alcolizer.com • *Australian Standard certified for Active (Standard) tests when Alcolizer approved mouthpieces are utilised.
Information correct as at: 30/06/2022 V300.03.300622
Copyright © 2022 Alcolizer Technology