Class 12 Chemistry 2024-25 Notes Chapter - 5 Coordination Compounds

Artham
Resource Material
For Session 2024-25
Best Notes
CBSE
CLASS 12 Chemistry
100% updated as per 2024-25 curriculum.
Quick Revision, tips, notes & mind maps.
Easily Understandable & effective language.
To the point Answers.

CHEMISTRY
CHAPTER 9: COORDINATION COMPOUNDS
COORDINATION COMPOUNDS
09
Coordination compounds are a special class of compounds in which the central metal atom is
surrounded by ions or molecules beyond their normal valency. These are also referred to as
complex compounds. These compounds are called Coordination compounds.
Many biologically important compounds are coordination compounds in which complicated

organic species are bound to metal ions. The common examples are : haemoglobin which is a
coordination compound of iron, chlorophyll which is a coordination compound of magnesium,
vitamin B12 which is a coordination compound of cobalt etc.
The coordination compounds contain a central metal atom or ion surrounded by a number of
oppositely charged ions or neutral molecules more than its normal valency.
For example: When aqueous ammonia is added to green solution of nickel chloride, NiCl 2, the
colour changes to purple. The Ni2+ ions almost disappear from the solution. The solution on
evaporation, yields purple crystals corresponding to the formula [Ni(NH 3)6]Cl2. Such a compound
is called coordination (or complex) compound. The properties of the complex compound are
completely different from those of Ni2+ ions or ammonia molecules.
When the compound is dissolved in water, it ionises to give a new species (Ni(NH 3)6]2+. Such an
ion is called complex ion.
[Ni(NH3)6]Cl2 → [Ni(NH3)6]2+ + 2Cl–
At this stage, it may be noted that the species in the square brackets does not ionise. It remains
as single entity. It is known as complex entity.
Double Salts
Double salts are addition or molecular compounds which are formed by two apparently saturated
compounds but they lose their identity when dissolved in water.
The common double salts are:
Mohr’s salt : FeSO4. (NH4)2SO4.6H2O
(1)
09
Potash alum : K2SO4.Al2(SO4)3.24H2O
Carnallite : KCl.MgCl2.6H2O
For example: Mohr’s salt dissolves in water and gives the characteristic properties of Fe2+, NH4+,
and SO42- ions. Thus, double salts are stable in solid state but break up into constituents when
dissolved in water.
FeSO4.(NH4)2SO4 → Fe2+ + (aq) + 2NH4+ (aq) + 2SO42-(aq)
On the other hand, the coordination compounds retain their identities in the solid state as well as
when dissolved in water or any other solvent. Their properties are completely different from the
constituents (metal and ions or molecules).
For example, [Ni(NH3)6]Cl2 does not show the properties of NiCl2 or ammonia. Similarly, complex
ion such as [Fe(CN)6]4- of K4[Fe(CN)6] does not dissociate into Fe2+ and CN¯ ions.
Werner’s Coordination Theory

Alfred Werner a Swiss chemist, in 1892 prepared a large number of coordination compounds and
studied their physical, chemical and isomeric behaviour by simple experimental techniques. He
isolated cobalt compounds from the reaction of cobalt chloride and ammonia.
The earlier studies of cobalt complexes were precipitation reactions, conductance measurements
and isomeric behaviour.
(1) Precipitation Studies
The number of ions furnished by a complex in a solution can be determined by precipitation

reactions.
For example:
(a) The number of Cl‾ ions in a solution of various amines were determined by the treatment
with silver nitrate solution. From the amount of white precipitate of AgCl formed per mole of the
compound, the number of Cl‾ ions can be calculated.
(b) When the compound CoCl3.6NH3 is treated with excess of AgNO3 , 3 mol of AgCl are obtained
from 1 mol of the compound i.e. all the three Cl¯ ions are precipitated.
(c) When the compound CoCl3.5NH3 is treated with excess of AgNO3, 2 mol of AgCl are obtained
i.e., only two Cl¯ ions are precipitated. This means that the compound CoCl3.5NH3 has three
ionizable chloride ions whereas in the compound CoCl 3.5NH3 only two chlorine atoms are
ionizable as Cl¯ ions.
(2)
09
CoCl3.6NH3 → 3 AgCl ( corresponding to 3 Cl¯ ions)
CoCl3.5NH3 → 2 AgCl ( corresponding to 2 Cl¯ ions)
Similarly, the number of chloride ions precipitated in the case of the compounds CoCl 3.4NH3 and
CoCl3.3NH3 have been found to be 1 and none.
(2) Conductance measurements
The measurement of molar conductances (^m) of solutions of coordination compounds helps to

estimate the number of ions furnished by the compound in solution.
By comparing the molar conductance of the compounds with those of some known electrolytes,
Werner was able to predict the number of ions present in the solution.
For example: The complex CoCl3.6NH3 behaved as 1:3 electrolyte, CoCl3.5NH3 as 1:2 electrolyte,
CoCl3.4NH3 as 1:1 electrolyte.
(3) Isomers of compounds
Werner attempted to assign structures of different coordination compounds by comparison of

the number of known isomers and the number of theoretically possible structures.
Postulates of Werner’s Coordination Theory
(1) In co-ordination compounds, metal atoms exhibit two types of valencies namely, the primary
valency and the secondary valency. The primary valency is ionizable whereas the secondary
valency is non ionizable. The primary valency corresponds to oxidation state and the secondary
valency corresponds to coordination number.
(2) Every metal atom has a fixed number of secondary valencies i.e., it he fixed coordination
number.
(3) The metal atom tends to satisfy both its primary as well as secondary valencies. Primary
valencies are satisfied by negative ions whereas secondary valencies are satisfied either by
negative ions or by neutral molecules. In certain cases, a negative ion may satisfy both types of
valencies.
(4) The secondary valencies are always directed towards the fixed position in space and this leads
to definite geometry of the coordination compound. Secondary valencies have characteristic
spatial arrangements corresponding to different coordination numbers. Spatial arrangements are
called coordination polyhedra.
(3)
09
For example: If a metal ion has six secondary valencies, these are arranged octahedrally around
the central metal ion. If the metal ion has four secondary valencies, these are arranged in either
tetrahedral or square planar arrangement around the central metal ion. The secondary valencies,
thus, determine the stereochemistry of the complex.
Thus, a metal atom exhibits primary valencies in the formation of its salts (e.g., CoCl3 , AgNO3)
while the metal atom exhibits its secondary valencies in the formation of its complex ions
e.g.: [Co(NH3)6]3+ , [Ag(NH3)2]+
Structures of Coordination Compounds on the Basis of Werner’s Theory
(1) CoCl3.6NH3 : Cobalt has primary valency (oxidation state) of three and secondary valency
(coordination number) six. Secondary valencies are represented by thick lines (—) and primary
valencies are shown by dotted lines (….). In the complex, all the 6 secondary valencies are
occupied by six NH3 molecules. The Cl¯ ions are bonded to Co by three primary valencies. These
chloride ions are ionisable and therefore can be precipitated on the addition of silver nitrate. The
central metal ion and the neutral molecules or ions (ligands) satisfying secondary valencies are
written in a square bracket while writing the formula of the complex compound.
Thus, the coordination compound may be formulated as [Co(NH 3)6]Cl3 .
The primary valencies are ionizable and therefore, all the chloride ions would get precipitated on
the addition of silver nitrate.
The species within the square brackets are also called coordination entities (or complexes). The
ions outside the square brackets are called counter ions. Thus, in the coordination compound
[Co(NH3)6Cl]3, [Co(NH3)6]3+ represents coordination entity and 3Cl¯ ions represent counter ions
The ionisation of the coordination compound is written as:
(4)
09
[Co(NH3)6Cl]3 ⇔ [Co(NH3)6]3+ + 3Cl¯
(2) CoCl3.5NH3 : In this compound, the coordination number of cobalt is 6 but now five positions
are occupied by NH3 molecules and the sixth position by one of the chloride ions.This chloride ion
has dual character as it satisfies secondary as well as a primary valency as indicated by a full line
as well as a dotted line.The two Cl¯ ions satisfy the remaining two primary valencies of cobalt.
This satisfies 6 secondary and 3 primary valencies of cobalt. However, on ionisation, only two Cl¯
ions will be precipitated because one Cl- ion which also satisfied secondary valency, will not be
precipitated.
Thus, the coordination compound may be formulated as [CoCl(NH 3)5]Cl2 which has
[CoCl(NH3)5]2+ complex entity and 2Cl‾ ions as counter ions. The ionisation of the coordination
compound may be written as:
[CoCl(NH3)5]Cl2 ⇔ [CoCl(NH3)5]2+ + 2Cl‾
(3) CoCl3.4NH3 : In the compound CoCl3.4NH3 , two chloride ions exhibit dual character of
satisfying both primary and secondary valencies. It will give precipitate with silver nitrate
corresponding to only one Cl‾ ion and the number of ions in this case is 2.
(5)
09
It may be formulated as
[CoCl2(NH3)4]Cl⇔ [CoCl2(NH3)4]+ + Cl‾
(4) CoCl3.NH3 : In the compound CoCl3.3NH3 ,three chloride ions satisfy primary and secondary
valencies. All the chloride ions are non-ionisable and will not be precipitated by the addition of
AgNO3. Therefore, the coordination compound behaves as neutral non- conducting molecule.
It may be formulated as [CoCl3(NH3)3] and does not ionise.
[CoCl3(NH3)3]⇔ Does not ionize
(6)
09
Differences between coordination compound and double bond
Coordination compound Double salt

A coordination compound contains a When two salts in stoichiometric ratio are
central metal atom or ion surrounded by crystallised together from their saturated
several oppositely charged ions or solution, they are called double salts.
neutral molecules. These ions or
molecules re-bonded to the metal
atom or ion by a coordinate bond.
Example: K4[Fe(CN)6] Example: FeSO4.(NH4)2SO4.6H2O
(Mohr’s salt)
They do not dissociate into simple ions They dissociate into simple ions when
when dissolved in water. dissolved in water.
• Coordination entity: A coordination entity constitutes a central metal atom or ion

bonded to a fixed number of ions or molecules. Example: In K4[Fe(CN)6], [Fe(CN)6]4−
represents a coordination entity.
• Central atom or ion: In a coordination entity, the atom/ion to which a fixed number of
ions/groups are bound in a definite geometrical arrangement is called the central atom or
ion. Example: In K4[Fe(CN)6],Fe²+ is the central metal ion.
• Ligands: A molecule, ion or group which is bonded to the metal atom or ion in a
complex or coordination compound by a coordinate bond is called a ligand. It may
be neutral, positively ornegatively charged. Examples: H2O, CN−, NO+ etc.
• Donor atom: An atom of the ligand attached directly to the metal is called the donor
atom. Example:In the complex K4[Fe(CN)6], carbon is a donor atom.
• Coordination number: The coordination number (CN) of a metal ion in a complex can
be defined as the number of ligand donor atoms to which the metal is directly bonded.
Example: In the complex K4[Fe(CN)6], the coordination number of Fe is 6.
• Coordination sphere: The central atom/ion and the ligands attached to it are
enclosed in square bracket and is collectively termed the coordination sphere.
Example: In the complex K4[Fe(CN)6],[Fe(CN)6]4− is the coordination sphere.
• Counter ions: The ions present outside the coordination sphere are called counter ions.
Example: Inthe complex K4[Fe(CN)6], K+ is the counter ion.
• Coordination polyhedron: The spatial arrangement of the ligand atoms which are
directly attached to the central atom/ion defines a coordination polyhedron about the
central atom. The most common coordination polyhedra are octahedral, square planar and
tetrahedral. Examples: [PtCl4]2− is square planar, Ni(CO)4 is tetrahedral and [Cu(NH3)6]3+ is
(7)
09
octahedral.
• Charge on the complex ion: The charge on the complex ion is equal to the
algebraic sum of thecharges on all the ligands coordinated to the central metal ion.
• Denticity: The number of ligating (linking) atoms present in a ligand is called denticity.
• Unidentate ligands: The ligands whose only donor atom is bonded to a metal
atom are calledunidentate ligands. Examples: H2O, NH3, CO, CN−
• Didentate ligands: The ligands which contain two donor atoms or ions through which
they are bonded to the metal ion. Example: Ethylene diamine (H2NCH2CH2NH2) has two
nitrogen atoms, and oxalate ion has two oxygen atoms which can bind with
the metal atom.
• Polydentate ligand: When several donor atoms are present in a single ligand, the
ligand is called a polydentate ligand. Example: In N(CH2CH2NH2)3, the ligand is said to be
polydentate. Ethylenediaminetetraacetate ion (EDTA4–) is an important hexadentate
ligand. It can bind through two nitrogen and four oxygen atoms to a central metal ion.
• Chelate: An inorganic metal complex in which there is a close ring of atoms caused by
attachment of a ligand to a metal atom at two points. An example is the complex ion
formed between ethylene diamine and cupric ion [Cu(NH2CH2NH2)2]2+.
• Ambidentate ligands: Ligands which can ligate (link) through two different atoms
present in it are called ambidentate ligands. Examples: NO − and SCN−. NO − can link
through N as well as O, while SCN− can link through S as well as N.
• Werner’s coordination theory: Werner was able to explain the nature of bonding
in complexes. The postulates of Werner’s theory are
o Metal shows two kinds of valencies—primary valence and secondary valence.
Primary valence Secondary valence

This valence is normally This valence is non-ionisable.
ionisable.
It is equal to the positive chargeon The secondary valency equals to the number of
the central metal atom. ligand atoms coordinated to the metal. It is also
called the coordination number of the metal.
These valencies are satisfied by It is commonly satisfied by neutral and

negatively charged ions. negatively charged, sometimes by positively
charged ligands.
Example: In CrCl3, the primary
valency is three. It is equal to the
oxidation state of the centralmetal
(8)
09
ion.
o The ions/groups bound by secondary linkages to the metal have characteristic spatial
arrangements corresponding to different coordination numbers.
o The most common geometrical shapes in coordination compounds are octahedral,
square planarand tetrahedral.
• Oxidation number of the central atom: The oxidation number of the central atom
in a complex is defined as the charge it would carry if all the ligands are removed along
with the electron pairs whichare shared with the central atom.
• Homoleptic complexes: Those complexes in which metal or ion is coordinately
bonded to only onekind of donor atom. Example: [Co(NH3)6]3+
• Heteroleptic complexes: Those complexes in which metal or ion is coordinately bonded
to more thanone kind of donor atom. Example: [CoCl2(NH3)4]+, [Co(NH3)5Br]2+
• Isomers: Two or more compounds which have the same chemical formula but different
arrangementof atoms are called isomers.
• Types of isomerism
oStructural isomerism
▪ Linkage isomerism
▪ Solvate isomerism or hydrate isomerism
▪ Ionisation isomerism
▪ Coordination isomerism
o Stereoisomerism
▪ Geometrical isomerism
▪ Optical isomerism
• Structural isomerism: This type of isomerism arises due to the difference in structures
of coordination compounds. Structural isomerism, or constitutional isomerism, is a form
of isomerism in which molecules with the same molecular formula have atoms bonded
together in different orders.
o Ionisation isomerism: This form of isomerism arises when the counter ion in a
complex salt is itself a potential ligand and can displace a ligand which can then
become the counter ion.
Examples: [Co(NH3)5Br] SO4 and [Co(NH3)5 SO4] Br
o Solvate isomerism: It is isomerism in which the solvent is involved as the ligand. If
the solvent is water, then it is called hydrate isomerism. Example: [Cr(H2O)6]Cl3 and
[CrCl2(H2O)4] Cl2.2H2O
o Linkage isomerism: Linkage isomerism arises in a coordination compound containing
an ambidentate ligand. In the isomerism, a ligand can form linkage with metal through
(9)
09
different atoms.
Examples: [Co(NH3)5ONO]Cl2 and [Co(NH3)5NO2]Cl2
o Coordination isomerism: This type of isomerism arises from the interchange of
ligands between cationic and anionic entities of different metal ions present in a
complex. Examples: [Co(NH3)6][Cr(C2O4)3] and [Cr(NH3)6][Co(C2O4)3]
• Stereoisomerism: This type of isomerism arises because of different spatial arrangement.
o Geometrical isomerism: It arises in heteroleptic complexes due to different
possible geometricalarrangements of ligands.
o Optical isomerism: Optical isomers are those isomers which are non-
superimposable mirrorimages.
Isomerism in Coordination Compounds
Isomerism
Two or more compounds having the same molecular formula but different arrangement of atoms
are called isomers and the phenomenon is called isomerism. Because of different arrangement of
atoms, isomers differ in one or more physical or chemical properties.
Isomers can be broadly classified into two major categories :
(A) Structural isomers
(B) Stereoisomers
Structural isomers
1. Ionisation isomerism
2. Hydrate isomerism
3. Coordination isomerism
4. Linkage isomerism
Stereoisomers
1. Geometrical isomerism
2. Optical isomerism
(A) Structural isomerism
The isomers which have same molecular formula but different structural arrangement of atoms or
groups of atoms around the central metal ion are called structural isomers.
(1) Ionisation isomerism
The compounds which have same molecular formula but give different ions in solution are called
ionisation isomers. In this type of isomerism, the difference arises from the interchange of groups
(10)
09
within or outside the coordination entity. This type of isomerism occurs when the counter ion in a
coordination compound is itself a potential ligand.
For example: There are two isomers of the compound of the formula Co(NH3)5BrSO4
(a) One of these is red-violet and forms a precipitate with BaCl2 indicating that sulphate ion is
outside the coordination entity.
(b) The second one is red and does not form precipitate with BaCl 2 but forms a precipitate of AgBr
with silver nitrate indicating that bromide ion is outside the coordination entity.
The structures of the two compounds and their mode of ionisation are :
Other compounds showing this type of isomerism are:

(i) [CoCl2(NH3)4]NO2 and [CoCl(NO2)(NH3)4]Cl
(ii) [Co(NO3)(NH3)]SO4 and [Co(SO4)(NH3)5]NO3
(iii) [PtCl2(NH3)4]Br2 and [PtBr2(NH3)4]Cl2
(iv) [CoCl(NO2)(NH3)4]Cl and [CoCl2(NH3)4]NO2
(2) Solvate or Hydrate isomerism
The compounds which have the same molecular formula but differ by whether or not a solvent
molecule is directly bonded to the metal ion or merely present as free solvent molecules in the
crystal lattice are called solvate isomers.
It is also known as hydrate isomerism where water is involved as a solvent.Thus, hydrate isomers
differ in the number of water molecules present as ligands or as molecules of hydration.
In type of isomerism water molecules may occur inside and outside the coordination sphere as a
coordinated group or a water of hydration.
For example, there are three isomers having the molecular formula CrCl3⋅6H2O.
(11)
09
These are :
(CrCl3(H2O)3], [CrCl(H2O)5]Cl2⋅H2O and [CrCl2(H2O)4]Cl⋅2H2O
(i) [Cr(H2O)6]Cl3 : It does not lose water when treated with conc. H2SO4 and three chloride ions
are precipitated with AgNO3.
(ii) [CrCl(H2O)5]Cl2⋅H2O
Blue green
It loses one water molecule when treated with conc. H 2SO4 and 2Cl¯ ions are precipitated with
AgNO3
(iii) (CrCl2(H2O)4]Cl.2H2O : It loses two water molecules on treatment with conc. H 2SO4 dark green
and one Cl¯ ion is precipitated with AgNO3.
Similarly, the following two isomers are hydrate isomers :
[CoCl(en)2(H2O)]Cl2 and [CoCl2(en)2]Cl.H2O
[CoCl(H2O)(NH3)4]Cl2 and [CoCl2(NH3)4]Cl.H2O
[CrCl2(C2H5N)2(H2O)2]Cl and [CrCl3(C2H5N5)2H2O].H2O
(3) Coordination isomerism
The type of isomerism occurs in compounds containing both cationic and anionic entities and the
isomers differ in the distribution of ligands in the coordination entity of cationic and anionic parts.
This type of isomerism arises from the interchange of ligands between cationic and anionic entities
of different metal ions present in the complex.
The examples are:
(i) [Co(NH3)6][Cr(CN)6] and [Cr(NH3)6] [Co(CN)6]
(ii) [Cu(NH3)4[PtCl4] and [Pt(NH3)4][CuCl4]

This type of isomerism is also shown by compounds in which the metal ion is the same in both
cationic and anionic complexes.
For example :
(i) [Cr(NH3)6][Cr(CN)6] and [Cr(CN)2(NH3)4][Cr(CN)4(NH3)2]
(ii) [(Pt(NH3)4] [PtCl4] and [PtCl(NH3)3][PtCl3(NH3)]
(4) Linkage isomerism
The compounds which have the same molecular formula but differ in the mode of attachment of a
ligand to the metal atom or ion are called linkage isomers.
For example: In NO2¯ ion, the nitrogen atom as well as the oxygen atom can donate their lone
pairs. This gives rise to isomerism.
(12)
09
If nitrogen donates its lone pair, one particular compound will be formed.
If oxygen donates its lone pair, a different compound (although having the same molecular
formula) is obtained. If the bonding is through N, the ligand is named as nitrito-N(or nitro) and if it
is through O, it is named as nitrito-O (or nitrito).
NO2¯ nitrito-N (or nitro)
ONO¯ nitrito-O (or nitrito)
For example: Jorgensen discovered such behaviour in the complex [(Co(NH 3)5(NO2)]Cl. He prepared
two different pentaamminecobalt(II) chloride each containing the NO 2 group in the complex ion.
These are:
The unidentate ligands which can bind to the central atom through two donor atoms are also
called ambidentate ligands.
Other examples of ligands are:
CN Cyano (through C)
NC Isocyano (through N)
SCN Thiocyanato (through S)
NCS Isothiocyanato (through N)
(B) Stereoisomers
Stereoisomers are those isomers which have the same position of atoms or groups but they differ
in the spatial arrangements around the central atom. Two types of isomerism viz., geometrical
isomerism and optical isomerism.
(1) Geometrical isomerism
Geometrical isomerism arises in heteroleptic complexes due to ligands occupying different
positions around the central ion. The ligands occupy positions either adjacent to one another or
opposite to one another. These are referred to as cis- form (ligands occupy adjacent positions) and
trans- form (ligands occupy opposite positions). This type of isomerism is, therefore, also referred
to as cis-trans isomerism.
(a) Geometrical isomerism in complexes of coordination number 4
The complexes having coordination number 4 adopt tetrahedral or square planar geometry. The
geometrical isomerism is not possible in tetrahedral complexes. This is because in tetrahedral
geometry all the positions adjacent to one another in these complexes.
However, square planar complexes show geometrical isomerism.
(1) Square planar complexes of the type MA2X2 , MA2XY, MABX2, MABXY can exist as
geometrical isomers (Here A and B are neutral ligands such as H2O, NH 3, CO, NO, C5H5N
whereas X and Y are anionic ligands such as Cl¯, NO2‾, CN¯, SCN¯ etc.)
(13)
09
Example:
(ii) [PtCl(C5H5N)2 (NH3)] exists in cis and trans form as:
(iii) Square planar complexes of the type MABCD show three isomers. The structures of these
isomers can be written by fixing the position of one ligand (say A) and placing the other ligands B,
C and D trans to it.
The complex [Pt(NO2)(py) (NH2OH)(NH3)]+ exists in three geometrical isomers as represented

below:
(14)
09
(iv) Geometrical isomerism cannot occur in complexes of the type MA 4 , MA3B or MAB3 because all
possible spatial arrangements for any of these complexes will be exactly equivalent.
(v) The square planar complexes containing unsymmetrical bidentate ligands such as [M(AB) 2] also
show geometrical isomerism. For example, the complex [Pt(gly) 2] where gly = NH2CH2COO¯ exists
in cis and trans form :
(vi) Geometrical isomerism is also shown by bridged binuclear complexes of the type M2A2X4. For
example: the complex [PtCl2 P(C2H5)3]2 exhibits geometrical isomers as :
(15)
09
IUPAC Nomenclature of Coordination Compounds

Rules for Writing Formula
The formula of a compound is a shorthand method used to provide basic information about the
constitution of a compound in a concise and convenient manner.
(1) The formula of the cation whether simple or complex is written first followed by that of the
anion.
(2) The coordination entity is written in square brackets.
(3) The sequence of symbols within the coordination entity is : first the symbol of the central
metal atom followed by ligands in alphabetical order.
The ligands in coordination entity are arranged as
(a) The different ligands are arranged alphabetically according to the first symbol of their
formulae. For example, H2O , NH3, NO3¯, SO42- and OH¯ etc. are cited at H, N, N, O, S and O.
(b) When the two ligands have same defining atom, the ligand with fewer such atoms is cited first
followed by the ligand having more atoms. For example, NH3 precedes N2
(c) If the numbers of defining atoms are equal, subsequent symbol decides the sequence.
For example NH2¯ precedes NO2¯ because H comes before O.
(d) Polydentate ligands are also listed alphabetically. In case of abbreviated ligand, the first letter
of the abbreviation is used to determine the position of the ligand in alphabetical order.
(e) The formula for the co-ordination entity, whether charged or not, is enclosed in square
brackets. Polyatomic ligands are enclosed in parentheses (), but all ligands are written without
any separation in between.
(f) There should be no space between the representations of ionic species within the formula.
(g) Sometimes abbreviations are used for formulae of the ligands. These abbreviations should be
in lower case and enclosed in parenthesis.
For example, py is used for pyridine and en is used for ethane-1, 2-diamine or ethylene diamine.
(h) The number of cations or anions to be written in the formula is calculated on the basis that
total positive charge must be equal to total negative charge.
(i) When the formula of the charged coordination entity is written without the formula of the
counter ion, the charge is indicated outside the square brackets as a right superscript with the
number before the sign (+ or -).
For example,
[Ni(NH3)6]2+, [Co(CN)6]3- , [CoCl(NH3)5]2+, etc.
Some common examples are :
(16)
09
K3[Fe(CN)6]
[CoCl2(NH3)4]Cl Cl is cited first than NH3
[Co(H2O)2(NH3)4]Cl2 H is cited before N
[Pt Cl2(C5H5N)NH3] Among neutral ligands C5H5N and NH3, C5H5N precedes NH3
Rules for naming the coordination compounds

(1) Order of naming ions
In ionic complexes, the cation is named first and then the anion.
NaCl : sodium chloride
Non-ionic complexes are given a one word name.
(2) Naming the coordination entity
In naming the coordination entity, the ligands are named first and then the central metal ion.
(3) Names of ligands
The names of anionic ligands (organic or inorganic) end in o-. In general, if the anionic ligand
name ends in -ide, -ite or -ate, the final ‘e’ is replaced by ’o’ giving-ido,-ito and-ato respectively.
For inorganic anionic ligands containing numerical prefixes such as triphosphate enclosing marks
() are added. The names of positive ligands end in -ium. The neutral ligands are named as such.
For example :
(i) Negative ligands end in -o :
F- fluorido
Cl- chlorido
Br¯ bromido
NO2¯ nitrito-N
ONO¯ nitrito-O
SO42¯ sulphato
OH- hydroxo
C2O42‾ oxalato
CN– cyano
CH3COO¯ acetato
SCN- thiocyanato
O22– peroxo
O2- oxo
(17)
09
N3– nitrido
P3- phosphido
N3¯ azido
NCS¯ isothiocyanato
H¯ hydrido
CO32– carbonato
NO3¯ nitrato
NH2¯ amido
NH2- imido
ClO3¯ Chlorato
S2O32– thiosulphato
(ii) positive ligands end in -ium

NO+nitrosonium
NH2NH3+ hydrazinium
NO2+ nitronium
(iii) neutral ligands are named as such
NH2CH2CH2NH2 ethane-1,2-diamine or ethylenediamine
C6H5N pyridine (py)
(C6H5)3P triphenylphosphine
PH3 phosphine
CS thiocarbonyl
H2NCSNH2 thiourea (tu)
dipyridyl (dipy)
However, there are a few exceptions in naming neutral ligands. For example,
H2O aqua
NH3 ammine
NO nitrosyl
CO carbonyl
(18)
09
(4) Order of naming ligands

When more than one type of ligands are present, they are named in alphabetical order of
preference without any consideration of charge.
For example : In the complex [CoCl(NO2)(NH3)4]+, the ligands are named in the order :
ammine, chlorido and nitrito-N. Similarly, in the complex K3[Fe(CN)5NO], the ligands are named as
cyano and nitrosyl.
(5) Numerical prefixes to indicate number of ligands

When more than one ligands of a particular kind are present in the complex, the di-, tri-, tetra-,
penta-, hexa-, etc. are used to indicate their number: two, three, four, five and six respectively.
When the name of the ligand, includes the numerical prefix (di, tri, tetra), the prefixes bis, tris,
tetrakis are used for two, three, four ligands, respectively. Such ligands are called complexligands.
For example: to indicate two simple ligands such as chloro, bromo, ammine, oxalato, etc., we use
the prefix di but to indicate two complex ligands such as ethylenediamine we use the prefix bis
(ethylenediamine) or bis (1,2-ethanediamine).
The name of the complex ligand is given in brackets.
For example :
[Co(en)3]3+ tris(ethane-1,2,-diamine)cobalt(III) ion
[NiCl2(PPh3)2] dichloridobis (triphenylphosphine)nickel(II)
(6) Ending of names
When the complex is anionic, the name of the central metal atom ends in -ate. For cationic and
neutral complexes, the name of the metal is written without any characteristic ending.
For example, the cationic complex [Co(NH3)6]Cl3 is named without characteristic ending of the
name of the metal as :
[Co(NH3)6]Cl3 hexaamminecobalt (III) chloride
The coordination compound, K[PtCl5(NH3)] which contains the anionic complex [PtCl 5(NH3)]¯ is
named with ending of the name of the metal as -ate.
K[PtCl5(NH3)] potassium amminepentachloridoplatinate (IV)
Similarly, the anionic complex Ca2[Fe(CN)6] is named as calcium hexacyanoferrate (II).
[Co(SCN)4]2– tetrathiocyanatocobaltate(II) ion.
For anionic complexes the Latin names of certain metals are commonly used.
For example: ferrate for Fe, cuperate for Cu, argentate for Ag, aurate for Au, stannate for
Sn, etc.
(19)
09
However, if the complex is cationic or neutral the name of the metal is given as such e.g., iron for
Fe, silver for Ag, gold for Au, copper for Cu, etc.
For example:
K3[Fe(CN)6] Potassium hexacyanoferrate (III)
[Fe(CO)5] Pentacarbonyliron (0)
(7) Oxidation state of central metal ion
The oxidation state of the central metal ion is designated by a Roman numeral (such as II, III, IV)
in the brackets at the end of the name of the complex without a gap between the two. Let us
discuss some examples:
(i) CoCl(NH3)5]Cl2
In this case the ligands are chloro and ammine. The complex is cation and chloride is anion. The
oxidation state of cobalt is III as
x+ 5(0) – 1- 2 = 0
or
x = +3.
Its name is pentaamminechloridocobalt(III) chloride
(ii) K3[Fe(CN)6]
In this case, the ligands are cyano. The complex is anionic. The oxidation state of iron is +3 as 3
(+1) +x + 6(-1) = 0
The name of the complex is potassium hexacyanoferrate(III). If the complex containing the
central ion, Fe3+ is anionic, the Latin name of metal is used i.e. ferrate.
(iii) [Co(H2NCH2CH2NH2)3] (SO4)3
In this case, ligands are ethane-1, 2-diamine (or ethylenediamine). The complex is cationic. The
oxidation state of cobalt is +3 as
[x + 3 x 0]2 + 3 (-2) = 0 or
2x = +6 or
x = +3
The name of the complex is tris (ethane-1, 2-diamine) cobalt(II) sulphate.
tris is used because the ligand is complex ligand.
(iv) [Ag(NH3)2] [Ag(CN)2]
Both cation and anion are complexes. The oxidation state of silver in both cationic and anionic
complexes is +1. The name of the complex is diamminesilver (I) dicyanoargentate (I)
(8) Point of attachment
(20)
09
When a ligand can coordinate through more than one atom, then the point of attachment of the
ligand is indicated by putting the symbol of the atom through which coordination occurs after the
name of the ligand. For example: NO2¯ can coordinate through -N or -O. If it coordinates through
N, it is called nitrito -N (or simply as nitro). If it coordinates through O, -ONO, it is called nitrito -O
or simply as nitrito.
NO2¯ (through N)
-ONO¯ (through O)
Nitrito – N
Nitrito – O
SCN¯ (through S) thiocyanato

NCS (through N) isothiocyanato
For example,
[Co(NO2)3(NH3)3] triamminetrinitrito-N-cobalt(III)
[Co(ONO)(NH3)5]SO4 pentaamminenitrito-O-cobalt(III) sulphate
(9) Naming geometrical isomers
Geometrical isomers are named by the use of the terms cis-to designate adjacent positions and
trans- to designate opposite positions.
For example: in square planar complexes shown below

(a) the positions 1, 4 ; 1, 2 ; 2, 3 and 3, 4 are cis-
(b) 1,3 and 2, 4 are trans
In naming these complexes, cis or trans is written before the names of these
compounds. Similarly, for octahedral complexes, cis- and trans are used in isomerism in
coordination compounds.
(21)
09
(10) Naming optical isomers

Optically active compounds are designated by the symbols (+) or d -for dextrorotatory and (-) or l-
for laevorotatory.
For example : d- K3[Cr(C2O4)3] Potassium (+) trioxalatochromate (III)
• Valence bond theory:
According to this theory, the metal atom or ion under the influence of ligands can use its
(n − 1)d, ns, np or ns, np or nd orbitals for hybridization to yield a set of equivalent
orbitals of definite geometry such as octahedral, tetrahedral and square planar. These
hybridised orbitals are allowed to overlap with ligand orbitals which can donate electron
pairs for bonding.
Coordinationnumber Type of hybridisation Distribution of hybrid

orbitals in space
4 sp3 Tetrahedral
4 dsp2 Square planar
5 sp3d Trigonal bipyramidal
sp3d2 (nd orbitals are
6 involved; outer orbital Octahedral
complex or high-spin or
spin-free complex)
d2sp3 [(n − 1)d orbitals
are involved; inner
6 orbital complex or low- Octahedral
spin or spin-paired
complex]
• Magnetic properties of coordination compounds: A coordination compound is

paramagnetic in nature if it has unpaired electrons and diamagnetic if all the electrons in
the coordination compoundare paired.
Magnetic moment 𝜇 = √𝑛(𝑛 + 2) where n is the number of unpaired electrons.
• Crystal Field Theory: It assumes the ligands to be point charges and there is an
(22)
09
electrostatic force of attraction between ligands and the metal atom or ion. It is a
theoretical assumption.
• Crystal field splitting in octahedral coordination complexes
• Crystal field splitting in tetrahedral coordination complexes

• For the same metal, the same ligands and metal–ligand distances, the difference in energy
between egand t2g level is
4
Δt = Δ0
9
• Metal carbonyls: Metal carbonyls are homoleptic complexes in which carbon monoxide
(CO) acts asthe ligand. Example: Ni(CO)4
The metal–carbon bond in metal carbonyls possesses both σ and 𝜋 characters. The metal–
carbon bond in metal carbonyls possess both s and p characters. The M–C σ bond is formed
by the donation of a lone pair of electrons from the carbonyl carbon into a vacant orbital of
the metal. The M–C 𝜋 bond is formed by the donation of a pair of electrons from a filled d
orbital of metal into the vacant anti-bonding 𝜋* orbital of carbon monoxide. The metal to
ligand bonding creates a synergic effect which strengthens the bond between CO and the
metal.
(23)
09
(24)
09
(25)
09
Important Questions
Multiple Choice questions-
1. IUPAC name of [Pt(NH3)3 Br (NO2) Cl] Cl isw
(a) triamminechlorodibromidoplatinum (IV) chloride
(b) triamminechloridobromidonitrochloride- platinum (IV) chloride
(c) triamminebromidochloridonitroplatinum (IV) chloride
(d) triamminenitrochlorobromoplatinum (IV) chloride
2. Trunbull’s blue is
(a) Ferricyanide
(b) Ferrous ferricyanide
(c) Ferrous cyanide
(d) Fe3[Fe(CN)6]4
3. Primary and secondary valency of Pt in [Pt(en) 2Cl2] are

(a) 4, 4
(b) 4, 6
(c) 6, 4
(d) 2, 6
4. The complex ions [Co(NH3)5(NO2)]2+ and [Co(NH3)5 (ONO)]2+ are called

(a) Ionization isomers
(b) Linkage isomers
(c) Co-ordination isomers
(d) Geometrical isomers
5. Which of the following has square planar structure?

(a) [NiCl4]2-
(b) [Ni(CO)4]
(c) [Ni(CN)4]2-
(d) None of these
6. Which of the following has magnesium?

(a) Chlorophll
(b) Haemocyanin
(c) Carbonic anhydrate
(d) Vitamin B12
7. Mohr’s salt is
(a) Fe2(SO4) 3 . (NH4)2SO4 . 6H2O
(b) FeSO4 . (NH4)2 . SO4 . 6H2O
(26)
09
(c) MgSO4 . 7H2O

(d) FeSO4 . 7H2O
8. Which of the following shall form an octahedral complex?

(a) d4 (low spin)
(b) d8 (high spin)
(c) d6 (low spin)
(d) All of these
9. EDTA is used for the estimation of

(a) Na+ and K+ ions
(b) Cl– and Br– ions
(c) Cu2+ and Cs+ ions
(d) Ca2+ and Mg2+ ions
10. The solution of the complex [Cu(NH3)4] SO4 in water will

(a) give the tests of Cu2+ ion
(b) give the tests of NH3
(c) give the tests of SO42- ions
(d) not give the tests of any of the above
Very Short Questions-
1. What is the shape of ?

2. What do you understand by stability of a complex and instability constant of
coordination compounds?
3. How is EDTA used in estimation of hardness of water?
4. Explain the role of complexes in metallurgy with an example.
5. How is excess of copper and iron removed from body?
6. Define – isomerism.
7. Indicate the types of isomerisms shown by the complex ?

8. Give an example of coordination isomerism?
9. What are complex compounds?
10. Give some examples of coordination compounds.
Short Questions-
1.Explain the synergic bonding in metal carbonyls.
2. Give some examples showing importance of complexes in biological system?
3.Give examples of complexes in
(27)
09
a) Chemical analysis
b) Industries
4.Distinguish between homoleptic and heteroleptic ligands.
5.What are the different shapes or coordination polyhedral in the complexes?
6.What is the difference between a double salt and a complex? Explain with an example.
7. Predict the number of unpaired electrons in the square planar ion.
8. Write all the geometrical isomers of and how many of these will
exhibit optical isomers?
9. What is spectrochemical series? Explain the difference between a weak field ligand and
a strong field ligand.
10.A solution of is green but a solution of is colourless.

Explain.
Long Questions-
1. What are ligands? Explain different types of ligands.
2. Write the formulas for the following coordination compounds:
(i) Tetraamminediaquacobalt (III) chloride
(ii) Potassium tetracyanonickelate (II)
(iii) Tris(ethane-1,2-diamine) chromium (III) chloride
(iv) Amminebromidochloridonitrito-N-platinate (II)
(v) Dichloridobis (ethane-1,2-diamine)platinum(IV) nitrate
(vi) Iron (III) hexacyanoferrate (II)

3. Write the IUPAC names of the following coordination compounds:
(i) (ii)
(iii) (iv)
(v) (vi)
4. Indicate the types of isomerism exhibited by the following complexes and draw the
structures for these isomers:
(i)
(28)
09
(ii)
(iii)
(iv)
5. Explain on the basis of valence bond theory that ion with square planar
structure is diamagnetic and the ion with tetrahedral geometry is paramagnetic.
6. is paramagnetic while is diamagnetic though both are tetrahedral.
Why?
7. is strongly paramagnetic whereas is weakly paramagnetic.

Explain.
8. Explain is an inner orbital complex whereas is an outer

orbital complex.
Assertion and Reason Questions-
1. In these questions, a statement of assertion followed by a statement of reason is given.
Choose the correct answer out of the following choices.
a) Assertion and reason both are correct statements and reason is correct explanation for
assertion.
b) Assertion and reason both are correct statements but reason is not correct explanation
for assertion.
c) Assertion is correct statement but reason is wrong statement.
d) Assertion is wrong statement but reason is correct statement.
Assertion: Zeise's salt is a ππ-bonded organometallic compound.
Reason: The oxidation number of platinum in Zeise's salt is +2.
2. In these questions, a statement of assertion followed by a statement of reason is given.

Choose the correct answer out of the following choices.
a) Assertion and reason both are correct statements and reason is correct explanation for
assertion.
b) Assertion and reason both are correct statements but reason is not correct explanation
for assertion.
c) Assertion is correct statement but reason is wrong statement.
(29)
09
d) Assertion is wrong statement but reason is correct statement.
Assertion: The second and third transition series elements have lesser tendency to fonn low
spin complex as compared to the first transition series.
Reason: The CFSE (Δ0) is more for 5d and 4d.
Case Study Questions-

1. Read the passage given below and answer the following questions:
Metal carbonyl is an example of coordination compounds in which carbon monoxide (CO) acts
as ligand. These are also called homoleptic carbonyls. These compounds contain
both σ and π character. Some carbonyls have metal-metal bonds. The reactivity of metal
carbonyls is due to (i) the metal centre and (ii) the CO ligands. CO is capable of accepting an
appreciable amount of electron density from the metal atom into their
empty π or π−orbital. These types of ligands are called π−accepter or π−acid ligands. These
interactions increases the Δ0 value.
The following questions are multiple choice questions. Choose the most appropriate answer:
(i) What is the oxidation state of metal in [Mn2(CO)10]?
a) +1
b) -1
c) +2
d) 0
(ii) Among the following metal carbonyls, the C-O bond order is lowest in:
a) [Mn(CO)6]+
b) [Fe(CO)5]
c) [Cr(CO)6]
d) [V(CO)6]-
(iii) Which of the following can be reduced easily?
a. V(CO)6
b. Mo(CO)6
c. [Co(CO)4]-
d. Fe(CO)5
(30)
09
(iv) The oxidation state of cobalt in K[Co(CO)4] is:
a. +1
b. +3
c. -1
d. 0
(v) Structure of decacarbonyl manganese is:
a. Trigonal bipyramidial
b. Octahedral
c. Tetrahedral
d. Square pyramidal
2. Read the passage given below and answer the following questions:
Coordination compounds are formulated and named according to the IUPAC system.
Few rules for naming coordination compounds are:
I. In ionic complex, the cation is named first and then the anion.
II. In the coordination entity, the ligands are named first and then the central metal ion.
III. When more than one type of ligands are present, they are named in alphabetical order of
preference without any consideration of charge.
The following questions are multiple choice questions. Choose the most appropriate answer:
(i) The IUPAC name of the complex [Pt(NH3)3Br(NO2)Cl]Cl is:
a) Triamminechlorobromonitroplatinum (IV) chloride.

b) Triamminebromonitrochloroplatinum (IV) chloride.
c) Triamminebromidochloridonitroplatinum (IV) chloride.
d) Triamminenitrochlorobromoplatinum (IV) chloride.
(ii) The IUPAC name of [Ni(CO)4] is:
a) Tetracarbonylnickel (II).
b) Tetracarbonylnickel (0).
c) Tetracarbonylnickelate (II).
d) Tetracarbonylnickelate (0).
(iii) As per IUPAC nomenclature, the name of the complex [Co(H2O)4(NH3)2]Cl3 is:
(31)
09
a) Tetraaquadiamminecobalt (II) chloride.

b) Tetraaquadiamminecobalt (III) chloride.
c) Diamminetetraaquacobalt (II) chloride.
d) Diamminetetraaquacobalt (III) chloride.
(iv) Which of the following represents correct formula of dichloridobis(ethane -1, 2-

diamine)cobalt (III) ion?
a) [CoCl2(en)]2+
b) [CoCl2(en)2]2+
c) [CoCl2(en)]+
d) [CoCl2(en)2]+
(v) Correct formula of pentaamminenitro-O-cobalt (III) sulphate is:
a) [Co(NO2)(NH3)5]SO4
b) [Co(ONO)(NH3)5]SO4
c) [Co(NO2)(NH3)4](SO4)2
d) [Co(ONO)(NH3)4](SO4)2
MCQ Answers-
1. Answer: c
2. Answer: b
3. Answer: d
4. Answer: b
5. Answer: c
6. Answer: a
7. Answer: b
8. Answer: b
9. Answer: d
10. Answer: c
Very Short Answers-

Ans 1.
(32)
09
Geometry = Trigonal bipyramidal/span>
Ans 2. The stability of a complex in solution is the degree of association between the
two species involved in the state of equilibrium. The instability constant is reciprocal of
the formation constant. It is also called dissociation constant.
Ans 3. Hard water is titrated with complex for estimation of its hardness.
During the process, the ions form complex with EDTA replacing . The
method is based on the difference in the stability constant of calcium and magnesium
complexes.
Ans 4. Some extraction processes make use of complex formation e.g. during metallurgy
of Gold, it combines with cyanide in the presence of oxygen and water to form the
complex in aqueous solution by addition of zinc.
Ans 5. Excess of copper and iron are removed by chelating Ligands D – penicillamine and
deferoxamine B through the formation of coordination compounds.
Ans 6. Isomerism is the phenomenon of existence of two or more compounds with same
chemical formula but a different arrangement of atoms.
Ans 7. Both geometrical and optical isomerisms will be present.
Ans 8. Example of coordination isomerism is
and
Ans 9. Complex compounds or coordination compounds are those compounds in which

the metal atoms are bound to a number of anions or neutral molecules.
(33)
09
Ans 10. Examples of coordination compounds are chlorophyll, haemoglobin, and vitamin
Short Answers-
Ans 1. The metal – carbon bond in metal carbonyls has both s & P- character. The M – C bond
is formed by donation of lone pair of electrons of carbonyl carbon into a vacant orbital of metal.
The M – C bond is formed by the donation of a pair of electrons from a filled d- orbital of metal
to the vacant orbital of carbon monoxide. The metal to ligand bonding creates a synergic effect
that strengthens the bond.
Ans 2. Examples of complexes in biological system-

1. Chlorophyll is a complex of Mg.
2. Haemoglobin is a complex of iron.
3. Cyanocobalamin, Vit , is a complex of cobalt.
Ans 3. (a) Chemical analysis – Qualitative and Quantitative analysis methods involve use of
Ligands like EDTA, DMG etc.
(b) Industries - Hydrogenation of alkenes is done by using a sodium complex called Wilkinson
catalyst. In black and white photography, silver complexes are used.
Ans 4. Homoleptic complexes are those in which only one type of ligand or donor group is
present e.g. has only as ligand. Whereas heteroleptic complexes are those in
which different types of ligands are present eg. has two type of ligands- NH3 and
Cl–.
(34)
09
Ans 5. The various coordination polyhedra are –
Ans 6. Double salts dissociate completely into simple ions when dissolved in water e.g., Mohr
salt, , will dissolve in water and give ferrous, ammonium and sulphate
ions. On the other hand, the complex ions do not completely dissociate into all constituent ions
e.g. ] will dissociate to give potassium ions and ions only.
Ans 7.
In this complex, Pt is in the +2 state. It forms a square planar structure. This means that it
undergoes hybridization. Now, the electronic configuration of Pd(+2) is .
being a strong field ligand causes the pairing of unpaired electrons. Hence, there are no
unpaired electrons in .
Ans 8.
From the above isomers, none will exhibit optical isomers. Tetrahedral complexes rarely show
optical isomerization. They do so only in the presence of unsymmetrical chelating agents.
Ans 9. A spectrochemical series is the arrangement of common ligands in the increasing order of
their crystal-field splitting energy (CFSE) values. The ligands present on the R.H.S of the series
are strong field ligands while that on the L.H.S are weak field ligands. Also, strong field ligands
(35)
09
cause higher splitting in the d orbitals than weak field ligands.
Ans 10. In , is a weak field ligand. Therefore, there are unpaired electrons
in . In this complex, the d electrons from the lower energy level can be excited to the higher
energy level i.e., the possibility of d – d transition is present. Hence, is coloured.

In , the electrons are all paired as is a strong field ligand. Therefore, d-
d transition is not possible in . Hence, it is colourless.
Long Answers-
Ans
1. The ions or molecules bound to central atom or ion in the coordination entity are ligands
e.g has six ligands.
Types: -
(1) On the basis of charges on them ligands can be negative, positive (e.g. , etc.) or
neutral (e.g. CO, , ).
(2) On the basis of their donor atoms ligands can be monodentate or unidentate (one donor
atom) e.g- , , etc, or didentate ligands (two donor atoms) or etc.
or polydentate (several donor atoms) e.g is a hexadentate ligand.
(3) Ligands which can ligate through two different atoms are called ambidentate ligands
eg. and ions. Whereas when a di– or polydentate ligand uses its two or more donor
atoms to bind a single metal ion, it is called chelate ligand.
Ans 2.
(i)
(36)
09
(ii)
(iii)
(vi)
(v)
(vi)
Ans 3. (i) Hexaamminecobalt(III) chloride

(ii) Pentaamminechloridocobalt(III) chloride
(iii) Potassium hexacyanoferrate(III)
(iv) Potassium trioxalatoferrate(III)
(v) Potassium tetrachloridopalladate(II)
(vi) Diamminechlorido(methylamine)platinum(II) chloride
Ans 4. Both geometrical (cis-, trans-) isomers for can exist. Also, optical
isomers for cis isomer exist.
Trans-isomer is optically inactive. On the other hand, cis isomer is optically active.
(ii) Two optical isomers for exist.
(37)
09
Two optical isomers are possible for this structure.
(iii)
A pair of optical isomers:
It can also show linkage isomerism.
and
It can also show ionization isomerism.
(iv) Geometrical (cis-, trans-) isomers of can exist.
Ans 5. Ni is in the +2-oxidation state i.e., in configuration.
(38)
09
There are 4 ions. Thus, it can either have a tetrahedral geometry or square planar geometry.
Since ion is a strong field ligand, it causes the pairing of unpaired 3d electrons.
It now undergoes hybridization. Since all electrons are paired, it is diamagnetic.

In case of , ion is a weak field ligand. Therefore, it does not lead to the pairing of
unpaired 3d electrons. Therefore, it undergoes hybridization.
Since there are 2 unpaired electrons in this case, it is paramagnetic in nature.
Ans 6. Though both and are tetrahedral, their magnetic characters are
different. This is due to a difference in the nature of ligands. is a weak field ligand and it
does not cause the pairing of unpaired 3d electrons. Hence, is paramagnetic.
In , Ni is in the zero-oxidation state i.e., it has a configuration of .
But CO is a strong field ligand. Therefore, it causes the pairing of unpaired 3d electrons. Also, it
causes the 4s electrons to shift to the 3d orbital, thereby giving rise to hybridization. Since no
unpaired electrons are present in this case, is diamagnetic.
Ans 7. In both and , Fe exists in the +3-oxidation state i.e., in

configuration.
(39)
09
Since is a strong field ligand, it causes the pairing of unpaired electrons. Therefore, there is
only one unpaired electron left in the d-orbital.
Therefore,
=1.732 BM
On the other hand, is a weak field ligand. Therefore, it cannot cause the pairing of electrons.
This means that the number of unpaired electrons is 5.
Therefore,
= 6 BM
Thus, it is evident that is strongly paramagnetic, while is weakly

paramagnetic.
Ans 8.
Oxidation state of cobalt = +3 Oxidation state of Ni = +2

Electronic configuration of cobalt = Electronic configuration of nickel =
If causes the pairing, then only one

3d orbital is empty. Thus, it cannot
undergo hybridization. Therefore, it
being a strong field ligand causes undergoes hybridization.
the pairing. Therefore, Cobalt can
undergo hybridization.
Hence, it is an inner orbital complex.
Hence, it forms an outer orbital complex.
(40)
09
Assertion and Reason Answers-

1. (b) Assertion and reason both are correct statements but reason is not correct explanation
for assertion.
Explanation:
In these complexes, the metal and ligand fonn a bond that involves the ππ-electrons of the
ligand and so it is a ππ-bonded organometallic compound.
2. (d) Assertion is wrong statement but reason is correct statement.
Explanation:
4d and 5d elements have greater tendency to form low spin complex (allows better pairing of
electrons) in comparison to 3d because the difference in energy of t2g and eg (CFSE, Δ0)
increases in 4d and 5d.
Case Study Answers-

1. Answer :
(i) (d) 0
Explanation:
Oxidation state of Mn in [Mn2(CO)10] is zero.
(ii) (d) [V(CO)6]-
Explanation:
In [V(CO)6]-, the anionic carbonyl complex can delocalise more electron density to
antibonding π−orbital (dπ−pπ back bonding) of CO and thus lowers the bond order.
(iii) (a) V(CO)6
Explanation:
V(CO)6 can be easily reduced to [V(CO)6]-. V(CO)6 has a total of 17 bonding electrons,
hence it is very reactive and unstable. [V(CO)6]- on the other hand has complete set of 18
bonding electrons as an electron is added into the bonding orbital when V(CO) 6 gets
reduced to [V(CO)6]-. All others have 18 bonding electrons.
(41)
09
(iv) (c) -1
Explanation:
K[Co(CO)4]
+1 + (x) + 4(0) = 0 or x = -1
(v) (d) Square pyramidal.
Explanation:
Mn2(CO)10 is made up of two square pyramidal Mn(CO) 5 units joined by Mn-Mn bond.
2. Answer :
(i) (c) Triamminebromidochloridonitroplatinum (IV) chloride.
Explanation:
Ligands are named in alphabetical order irrespective of their charge.
(ii) (b) Tetracarbonylnickel (0).
(iii) (d) Diamminetetraaquacobalt (III) chloride.
(iv) (d) [CoCl2(en)2]+
(v) (b) [Co(ONO)(NH3)5]SO4
Explanation:
Ligand NO−2 is ambidentate ligand as it can donate electrons through either nitrogen (NO 2) or
oxygen (ONO).
(42)
CLICK TO DOWNLOAD MORE CHAPTER
JOIN OUR
WHATSAPP
GROUPS
FOR FREE EDUCATIONAL
RESOURCES
JOIN SCHOOL OF EDUCATORS WHATSAPP GROUPS
FOR FREE EDUCATIONAL RESOURCES
We are thrilled to introduce the School of Educators WhatsApp Group, a
platform designed exclusively for educators to enhance your teaching & Learning
experience and learning outcomes. Here are some of the key benefits you can
expect from joining our group:
BENEFITS OF SOE WHATSAPP GROUPS
Abundance of Content: Members gain access to an extensive repository of

educational materials tailored to their class level. This includes various formats such
as PDFs, Word files, PowerPoint presentations, lesson plans, worksheets, practical
tips, viva questions, reference books, smart content, curriculum details, syllabus,
marking schemes, exam patterns, and blueprints. This rich assortment of resources
enhances teaching and learning experiences.
Immediate Doubt Resolution: The group facilitates quick clarification of doubts.

Members can seek assistance by sending messages, and experts promptly respond
to queries. This real-time interaction fosters a supportive learning environment
where educators and students can exchange knowledge and address concerns
effectively.
Access to Previous Years' Question Papers and Topper Answers: The group
provides access to previous years' question papers (PYQ) and exemplary answer
scripts of toppers. This resource is invaluable for exam preparation, allowing
individuals to familiarize themselves with the exam format, gain insights into scoring
techniques, and enhance their performance in assessments.
Free and Unlimited Resources: Members enjoy the benefit of accessing an array of
educational resources without any cost restrictions. Whether its study materials,
teaching aids, or assessment tools, the group offers an abundance of resources
tailored to individual needs. This accessibility ensures that educators and students
have ample support in their academic endeavors without financial constraints.
Instant Access to Educational Content: SOE WhatsApp groups are a platform where
teachers can access a wide range of educational content instantly. This includes study
materials, notes, sample papers, reference materials, and relevant links shared by
group members and moderators.
Timely Updates and Reminders: SOE WhatsApp groups serve as a source of timely
updates and reminders about important dates, exam schedules, syllabus changes, and
academic events. Teachers can stay informed and well-prepared for upcoming
assessments and activities.
Interactive Learning Environment: Teachers can engage in discussions, ask questions,

and seek clarifications within the group, creating an interactive learning environment.
This fosters collaboration, peer learning, and knowledge sharing among group
members, enhancing understanding and retention of concepts.
Access to Expert Guidance: SOE WhatsApp groups are moderated by subject matter
experts, teachers, or experienced educators can benefit from their guidance,
expertise, and insights on various academic topics, exam strategies, and study
techniques.
Join the School of Educators WhatsApp Group today and unlock a world of resources,
support, and collaboration to take your teaching to new heights. To join, simply click
on the group links provided below or send a message to +91-95208-77777 expressing
your interest.
Together, let's empower ourselves & Our Students and

inspire the next generation of learners.
Best Regards,
Team
School of Educators
Join School of Educators WhatsApp Groups
You will get Pre- Board Papers PDF, Word file, PPT, Lesson Plan, Worksheet, practical
tips and Viva questions, reference books, smart content, curriculum, syllabus,
marking scheme, toppers answer scripts, revised exam pattern, revised syllabus,
Blue Print etc. here . Join Your Subject / Class WhatsApp Group.
Kindergarten to Class XII (For Teachers Only)
Class 1 Class 2 Class 3
Class 10 Class 11 (Science) Class 11 (Humanities)
Class 11 (Commerce) Class 12 (Science) Class 12 (Humanities)
Class 12 (Commerce) Kindergarten

Subject Wise Secondary and Senior Secondary Groups
(IX & X For Teachers Only)
Secondary Groups (IX & X)
SST Mathematics Science
English Hindi-A IT Code-402
Hindi-B Artificial Intelligence
Senior Secondary Groups (XI & XII For Teachers Only)
Physics Chemistry English
Mathematics Biology Accountancy
Economics BST History

Geography Sociology Hindi Elective
Hindi Core Home Science Sanskrit
Psychology Political Science Painting
Vocal Music Comp. Science IP
Physical Education APP. Mathematics Legal Studies
Entrepreneurship French IT
Artificial Intelligence
Other Important Groups (For Teachers & Principal’s)
Principal’s Group Teachers Jobs IIT/NEET

Join School of Educators WhatsApp Groups
You will get Pre- Board Papers PDF, Word file, PPT, Lesson Plan, Worksheet, practical
tips and Viva questions, reference books, smart content, curriculum, syllabus,
marking scheme, toppers answer scripts, revised exam pattern, revised syllabus,
Blue Print etc. here . Join Your Subject / Class WhatsApp Group.
Kindergarten to Class XII (For Students Only)
Class 10 Class 11 (Science) Class 11 (Humanities)
Class 11 (Commerce) Class 12 (Science) Class 12 (Humanities)
Class 12 (Commerce) Artificial Intelligence

(VI TO VIII)
Subject Wise Secondary and Senior Secondary Groups
(IX & X For Students Only)
Secondary Groups (IX & X)
SST Mathematics Science
English Hindi IT Code
Senior Secondary Groups (XI & XII For Students Only)
Physics Chemistry English
Mathematics Biology Accountancy
Economics BST History

Geography Sociology Hindi Elective
Hindi Core Home Science Sanskrit
Psychology Political Science Painting
Music Comp. Science IP
Physical Education APP. Mathematics Legal Studies
Entrepreneurship French IT
AI IIT/NEET CUET
Groups Rules & Regulations:
To maximize the benefits of these WhatsApp groups, follow these guidelines:
1. Share your valuable resources with the group.

2. Help your fellow educators by answering their queries.
3. Watch and engage with shared videos in the group.
4. Distribute WhatsApp group resources among your students.
5. Encourage your colleagues to join these groups.
Additional notes:
1. Avoid posting messages between 9 PM and 7 AM.
2. After sharing resources with students, consider deleting outdated data if necessary.
3. It's a NO Nuisance groups, single nuisance and you will be removed.
No introductions.
No greetings or wish messages.
No personal chats or messages.
No spam. Or voice calls
Share and seek learning resources only.
Please only share and request learning resources. For assistance,

contact the helpline via WhatsApp: +91-95208-77777.
Join Premium WhatsApp Groups
Ultimate Educational Resources!!
Join our premium groups and just Rs. 1000 and gain access to all our exclusive
materials for the entire academic year. Whether you're a student in Class IX, X, XI, or
XII, or a teacher for these grades, Artham Resources provides the ultimate tools to
enhance learning. Pay now to delve into a world of premium educational content!
Click here for more details
Class 12
📣 Don't Miss Out! Elevate your academic journey with top-notch study materials and secure
your path to top scores! Revolutionize your study routine and reach your academic goals with
our comprehensive resources. Join now and set yourself up for success! 📚🌟
Best Wishes,
Team
School of Educators & Artham Resources
SKILL MODULES BEING OFFERED IN
MIDDLE SCHOOL
Artificial Intelligence Beauty & Wellness Design Thinking & Financial Literacy
Innovation
Handicrafts Information Technology Marketing/Commercial Mass Media - Being Media

Application Literate
Data Science (Class VIII Augmented Reality /

Travel & Tourism Coding
only) Virtual Reality
Digital Citizenship Life Cycle of Medicine & Things you should know What to do when Doctor
Vaccine about keeping Medicines is not around
at home
Humanity & Covid-19 Blue Pottery Pottery Block Printing

Food Food Preservation Baking Herbal Heritage
Khadi Mask Making Mass Media Making of a Graphic

Novel
Kashmiri Embroidery Satellites

Rockets
Embroidery
Application of Photography
Satellites
SKILL SUBJECTS AT SECONDARY LEVEL (CLASSES IX – X)
Retail Information Technology Automotive

Security
Introduction To Financial Introduction To Tourism Beauty & Wellness Agriculture

Markets
Food Production Front Office Operations Banking & Insurance Marketing & Sales
Health Care Apparel Multi Media Multi Skill Foundation

Course
Physical Activity Trainer Electronics & Hardware
Data Science
(NEW)
Foundation Skills For Sciences Design Thinking & Innovation (NEW)

(Pharmaceutical & Biotechnology)(NEW)
SKILL SUBJECTS AT SR. SEC. LEVEL
(CLASSES XI – XII)
Retail InformationTechnology Web Application Automotive
Financial Markets Management Tourism Beauty & Wellness Agriculture
Food Production Front Office Operations Banking Marketing
Health Care Insurance Horticulture Typography & Comp.

Application
Geospatial Technology Electrical Technology Electronic Technology Multi-Media

Taxation Cost Accounting Office Procedures & Shorthand (English)
Practices
Shorthand (Hindi) Air-Conditioning & Medical Diagnostics Textile Design

Refrigeration
Salesmanship Business Food Nutrition &

Design
Administration Dietetics
Mass Media Studies Library & Information Fashion Studies Applied Mathematics
Science
Yoga Early Childhood Care & Artificial Intelligence Data Science

Education
Physical Activity Land Transportation Electronics & Design Thinking &

Trainer(new) Associate (NEW) Hardware (NEW) Innovation (NEW)
Pdf Purchase
Print Purchase Scan QR Code to join
Telegram Groups &
Channels for more free
Amazon Print Purchase resources.

Class 12 Chemistry 2024-25 Notes Chapter - 5 Coordination Compounds

Uploaded by

Copyright:

Available Formats

Class 12 Chemistry 2024-25 Notes Chapter - 5 Coordination Compounds

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Class 12 Chemistry 2024-25 Notes Chapter - 5 Coordination Compounds

Uploaded by

Copyright:

Available Formats

Artham

100% updated as per 2024-25 curriculum.

Quick Revision, tips, notes & mind maps.

Easily Understandable & effective language.

To the point Answers.

Many biologically important compounds are coordination compounds in which complicated

[Ni(NH3)6]Cl2 → [Ni(NH3)6]2+ + 2Cl–

The common double salts are:

Mohr’s salt : FeSO4. (NH4)2SO4.6H2O

Potash alum : K2SO4.Al2(SO4)3.24H2O

FeSO4.(NH4)2SO4 → Fe2+ + (aq) + 2NH4+ (aq) + 2SO42-(aq)

Werner’s Coordination Theory

(1) Precipitation Studies

The number of ions furnished by a complex in a solution can be determined by precipitation

CoCl3.6NH3 → 3 AgCl ( corresponding to 3 Cl¯ ions)

CoCl3.5NH3 → 2 AgCl ( corresponding to 2 Cl¯ ions)

(2) Conductance measurements

The measurement of molar conductances (^m) of solutions of coordination compounds helps to

(3) Isomers of compounds

Werner attempted to assign structures of different coordination compounds by comparison of

Postulates of Werner’s Coordination Theory

e.g.: [Co(NH3)6]3+ , [Ag(NH3)2]+

Structures of Coordination Compounds on the Basis of Werner’s Theory

Thus, the coordination compound may be formulated as [Co(NH 3)6]Cl3 .

The ionisation of the coordination compound is written as:

[Co(NH3)6Cl]3 ⇔ [Co(NH3)6]3+ + 3Cl¯

[CoCl(NH3)5]Cl2 ⇔ [CoCl(NH3)5]2+ + 2Cl‾

[CoCl2(NH3)4]Cl⇔ [CoCl2(NH3)4]+ + Cl‾

It may be formulated as [CoCl3(NH3)3] and does not ionise.

[CoCl3(NH3)3]⇔ Does not ionize

Differences between coordination compound and double bond

Coordination compound Double salt

• Coordination entity: A coordination entity constitutes a central metal atom or ion

Primary valence Secondary valence

These valencies are satisfied by It is commonly satisfied by neutral and

Other compounds showing this type of isomerism are:

(ii) [Cu(NH3)4[PtCl4] and [Pt(NH3)4][CuCl4]

(ii) [PtCl(C5H5N)2 (NH3)] exists in cis and trans form as:

The complex [Pt(NO2)(py) (NH2OH)(NH3)]+ exists in three geometrical isomers as represented

IUPAC Nomenclature of Coordination Compounds

Rules for naming the coordination compounds

(ii) positive ligands end in -ium

(4) Order of naming ligands

(5) Numerical prefixes to indicate number of ligands

SCN¯ (through S) thiocyanato

For example: in square planar complexes shown below

(10) Naming optical isomers

Coordinationnumber Type of hybridisation Distribution of hybrid

• Magnetic properties of coordination compounds: A coordination compound is

• Crystal field splitting in tetrahedral coordination complexes

3. Primary and secondary valency of Pt in [Pt(en) 2Cl2] are

4. The complex ions [Co(NH3)5(NO2)]2+ and [Co(NH3)5 (ONO)]2+ are called

5. Which of the following has square planar structure?

6. Which of the following has magnesium?

(c) MgSO4 . 7H2O

8. Which of the following shall form an octahedral complex?

9. EDTA is used for the estimation of

10. The solution of the complex [Cu(NH3)4] SO4 in water will

Very Short Questions-