Target DPP Test Contact Number: 9667591930 / 8527521718

8. Two condensers C1 and C2 in a circuit are joined as 12. Four identical capacitors are connected as shown in
shown in figure. The potential of point A is V1 and that diagram. When a battery of 6 V is connected between A
of B is V2. The potential of point D will be and B, the charge stored is found to be 1.5 µC. The value
of C1 is

(1) 12 (V1 + V2 )
C2 V1 +C1 V2
(2) C1 +C2
C1 V1 +C2 V2
(3) C1 +C2
C2 V1 −C1 V2
(4) C1 +C2

9. The equivalent capacitance between A and B is:

(1) 2.5 µF
(2) 15 µF
(3) 1.5 µF
(4) 0.1 µF

13. To form a composite 16 µF, 1000 V capacitor from a

supply of identical capacitors marked 8 µF, 250 V, we
1. 2 µF 2. 3 µF
require a minimum number of capacitors
3. 5 µF 4. 0.5 µF 1. 40
2. 32
3. 8
10. Three capacitors each of capacity 4 µF are to be 4. 2
connected in such a way that the effective capacitance is
6 µF. This can be done by 14. A capacitor of 1 µF withstands a maximum voltage
(1) Connecting them in parallel of 6 kilovolts while another capacitor of 2 µF
(2) Connecting two in series and one in parallel withstands a maximum voltage of 4 kilovolts. If the two
(3) Connecting two in parallel and one in series capacitors are connected in series, the system will
(4) Connecting all of them in series withstand a maximum voltage of:
1. 2 kV 2. 4 kV
11. A capacitor of capacity C1 is charged upto V volt and
3. 6 kV 4. 9 kV
then connected to an uncharged capacitor of capacity C2.
Then final potential difference across each will be
C2 V
(1) C +C
1 2

(2) (1 + )V
C2
C1
C1 V
(3) C1 +C2

(4) (1 − )V
C2
C1

https://www.neetprep.com/tests/questions/4018215 07/09/24, 5 24 PM
Page 3 of 10
:
 Target DPP Test Contact Number: 9667591930 / 8527521718

15. Two capacitors of capacitance 6 µF and 3 µF are 18. How many capacitors each of 8 µF and 250 V are
connected in series with battery of 30 V. The charge on required to form a composite capacitor of 16 µF and
3 µF capacitor at a steady state is: 1 kV?
1. 16 2. 8
3. 64 4. 32

19. The potential difference between points a and b in

the circuit shown below is:

1. 3 µC
2. 1.5 µC
3. 60 µC
4. 900 µC

16. If n identical drops, each of capacitance C, coalesce 1. 4V

to form a single big drop, the capacitance of the big drop 2. 5V
will be 3. 6V
1. n3 C 4. 10 V
2. nC
3. n1/2 C 20. The electric potential difference between two
4. n1/3 C parallel plates is 2000 V. If the plates are separated by
2 mm, what is the magnitude of the electrostatic force
17. Two capacitors of capacity 2 µF and 3 µF are on a charge of 4 × 10−6 C located midway between the
charged to the same potential difference of 6 V. Now plates?
they are connected with opposite polarity as shown. 1. 4 N 2. 6 N
After closing switches S1 and S2 , their final potential
3. 8 N 4. 1.5 × 10−6 N
difference becomes:

4
1. zero 2. 3
V
6
3. 3V 4. 5
V

https://www.neetprep.com/tests/questions/4018215 07/09/24, 5 24 PM
Page 5 of 10
:
 Target DPP Test Contact Number: 9667591930 / 8527521718

21. Three capacitors are connected in 24. A number of capacitors each of capacitance 1 µF
triangle as shown in the figure. The and each one of which get punctured if a potential
equivalent capacitance between the difference just exceeding 500 volt is applied, are
points A and C is provided. Then an arrangement suitable for giving a
capacitor of 2 µF across which 3000 volt may be
applied requires at least:
1. 18 component capacitors
2. 36 component capacitors
3. 72 component capacitors
4. 144 component capacitors

25. If the breakdown voltage of each capacitor is 20 V.

Then find the maximum emf E of the battery so that no
capacitor will burn.

1. 1µF
2. 2 µF
3. 3 µF
4. 1/4 µF

22. Which of the following statements is true?

1. The capacitance of a capacitor is the magnitude of net 1. 20 V
charge present on the two plates divided by the potential 2. 40 V
50
difference between the plates. 3. 3 V
2. The equivalent capacitance of two capacitors in 4.
80
V
3
parallel is always the sum of the two capacitances
3. A dielectric material inserted between the conductors 26. A parallel plate capacitor with each plate area A is
of a capacitor decreases its capacitance. uncharged and attached to a spring in natural length.
4. The electrostatic energy stored in a capacitor is Now, plates are given charges such that charge density
always more than the energy lost as heat when it is on plates is ±σ. If spring constant of spring is k, what is
connected across a battery. extension of the spring?

23. Two capacitors, one of 3 µF and the other of 1 µF

are charged to 2 V, 4 V and are connected to each other
in either of the two ways: their like terminals together (
A) or unlike (i.e. oppositely charged) terminals together
(B). The potential differences are VA , VB in these cases.
Then: σ2
1. VA = 2VB 1. 2ϵ0 kA
σ2A
2. VA = 4VB 2. ϵ0 k
3. VA = 5VB σ2A
3. 2ϵ0 k
4. VA = 6VB
2σ 2 A
4. ϵ0 k

https://www.neetprep.com/tests/questions/4018215 07/09/24, 5 24 PM
Page 7 of 10
:
 Target DPP Test Contact Number: 9667591930 / 8527521718

27. The equivalent capacitance of the circuit between the 30. What will be the equivalent capacitance across
points A and B is equal to: points A and B in the given electrical circuit?

C
1. 2C 1. 2
2. 2C
3C 5C 3C
2. 2 3. 3
4. 4
3. 3C
5C
4. 2

28. Two parallel plate capacitors of capacity C and 3C Fill OMR Sheet*
are connected in parallel combination and charged to a
potential difference of 18 V. The battery is then *If above link doesn't work, please go to test link from
disconnected and the space between the plates of the where you got the pdf and fill OMR from there
capacitor of capacity C is completely filled with a
material of dielectric constant 9. The final potential
difference across the combination of capacitors will be:
1. 3V 2. 5V
9V 6V
3. 4.
CLICK HERE to get
29. The equivalent capacitance of the system shown in
FREE ACCESS for 2
the following circuit is:
days of ANY NEETprep
course

1. 9 µF
2. 2 µF
3. 3 µF
4. 6 µF

https://www.neetprep.com/tests/questions/4018215 07/09/24, 5 24 PM
Page 9 of 10
: