EoC Ethernet over Coax Data Sheet

Transceiver with PoE+

Model NV-EC1701

Application Example:
Monitor
NV-EC1701 NV-EC1701
Cat5 Coax Cable Cat5
Hybrid DVR or NVR
IP Camera
www.nvt.com ● (+1) 650.462.8100 ● (+44) (0) 208 977 6614
Ethernet over Coax Transceiver
Model NV-EC1701 Model NV-EC1701
Ethernet over Coax Transceiver
www.nvt.com ● (+1) 650.462.8100 ● (+44) (0) 208 977 6614

≤100m ≤100m
(≤328ft) (≤328ft)

56VDC LAN / WAN

Power Supply

Features:
• 100 BaseT transmission; Network speeds up to 93 Mbps*; Up to 8,000ft (2,500m)*

• One NV-EC1701 transceiver at the network-end can support multiple* remote transceivers/IP
cameras using the NV-EC4BNC adaptor/splitter.

• 56 VDC is distributed over the coax to all connected equipment.

• Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts*

• Easy configuration, no PC required.

• Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast*, etc.)

• 128-bit AES encrypted transmission

• Built-in transient protection; Industrial temperature range.

• Available in 1-4 Camera System Kits

• Limited lifetime warranty.

The NVT Model NV-EC1701 Ethernet over Coax Transceiver is a compact media converter that allows
10/100 BaseT Ethernet and PoE+ power to be transmitted using coax cable. These devices are often
used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras. 56
VDC class 2 power is delivered to one transceiver, which distributes it to multiple* remote transmitters,
and their PoE, PoE+, or High Power PoE cameras*.

These transceivers are extremely simple to use, with no IP or MAC addressing required. Status LEDs
indicate power and link connectivity/activity for RJ45 and BNC ports They are backed by NVT’s award
winning customer support and limited lifetime warranty.

* Distance and number of devices supported may be lower due to power supply capacity and wire voltage-drop. See Wire Distance Charts on page 5.
Bandwidth is dynamically allocated. Multicast requires an IGMP Querier within your network switch. High bandwidth streaming devices (>15Mbps) that
employ unusually “chatty”protocols (TCP/IP, TFTP, etc.) are not recommended. Use RTP/UDP instead.

Network Video Technologies

(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Page 1 of 5
 TECHNICAL SPECIFICATIONS
R J 4 5 E T H E R N E T I N T E R FA C E L E D S TAT U S I N D I C AT O R S BNC
On when
Connectivity: RJ45, auto-crossover Link detected
Flashes
Wire type: Cat5 or better with Data

Distance: up to 328ft (100m) BNC RJ45

Speed: 10/100 Base T, auto-negotiation Power 56VDC
auto MDI/MDIX cross-over Flashes
when RJ45
initializing On when
Latency: 3mS or Joining connected
Data throughput: 85Mbps ±10% useable bandwidth per network Flashes
with Data
Example: Four megapixel cameras, all sharing Power PoE
one coax network, each sending 20Mbps video
stream(s).
Power Output: This Power Sourcing Equipment (PSE) supports
Powered Devices (PDs) that are compatible with
IEEE 802.3af/at, or PDs that draw up to 50 watts*.
For maximum power/distance, 56 VDC appears on MECHANICAL
all eight RJ45 pins, and are current protected and Transceiver body dimensions: 4.10 in (102mm) long
transient-protected. (excluding connectors) 1.57 in (40mm) high
1.65 in (42mm) wide
C O A X B U I L D I N G W I R I N G I N T E R FA C E Transceiver weight: 0.32lb. (145g)
Connectivity: BNC, RG-59/U or similar
Operating and storage temperature: 40°F to 185°F (-40°C to +85°C)
Impedance: 25 to 100Ω 20 to 85% RH non-condensing
Distance: See pages 5 & 6 Transient Immunity: 5x20µS 3000A, 6000V
ESD 20KV, 200pF
Topology: Bus architecture supports star, daisy-chain, or any P O W E R S U P P LY
combination. One control-room NV-EC1701 may support Power supplies are external inline, with an IEC380-
multiple remote NV-EC1701s. + 56VDC
C14 power inlet and a 6 ft (1.18 m) line cord. Input
Transmission technology: IEEE 1901, 128-bit AES encryption voltage is 100~240VAC 50/60Hz. A molded P1J 5.5mm barrel
connector provides a class 2 (SELV) regulated output with one
* I M P O R TA N T N O T E : of these ratings:
Distance will often be shorter due to power supply capacity and wire Model NV-PS56-60W 56V 60W
voltage-drop. See Maximum Per-Camera Wire Distance Chart on page 5. 4.90 in (124 mm) long x 2.00 in
(51 mm) wide x 1.25 in (32 mm) high
0.67 lb (0.30 Kg) shipping weight
WARNING: For safety, never use more than two power
supplies. Never exceed 120 watts. Model NV-PS56-90W 56V 90W
5.77 in (147 mm) long x 2.36 in (60 mm) wide
x 1.27 in (32 mm) high
0.94 lb (0.43 Kg) shipping weight
L E D S TAT U S I N D I C AT O R S
Power: Blue “Power On” Operating / storage temperature: -40°F to +185°F (-40°C to +85°C)
20 to 5% relative humidity non-condensing)
BNC Interface: Green “Link”
RJ45 Interface: Green “Link” Transient immunity: 5 x 20µS 3,000A, 6,000V ESD 20KV, 200pF

Use only the power cord provided with the unit or equivalent UL approved
POWER CONSUMPTION type SPT-2, SVT, or SJT 18/3 AWG 100~240 VAC, 1 Amp 60°C max 15 ft
Consumption per transceiver: ≤ 3.0 W @ 10 to 56 VDC (4.5 m) long. One end with IEC380-C13 appliance coupler and the other end
Total system consumption: = total consumption of transceivers with NEMA 1015P or equivalent for your country.
+ total consumption of PDs (IP cameras)
+ total power dissipated in the wire R E G U L AT O RY
Generated heat: 10 BTU/hour

UL Listed to IEC/UL 60950-1 Complies with FCC part 15A limits

WARRANTY Limited Lifetime

Specifications subject to change without notice.

Network Video Technologies

(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Page 2 of 5
 NV-EC1701 ACCESSORIES

NV-PS56-60W: 56VDC power supply, 60 watts

with IEC line cord

NV-PS56-90W: 56VDC power supply, 90 watts

with IEC line cord

NV-BNCT: BNC “T” adaptor

NV-EC4BNC: 1:4 BNC splitter adaptor

NV-BNCA: BNC Screw terminal adaptor

NV-RJ45A: RJ45 Screw terminal adaptor

NV-PC4PR: RJ45 Patch Cord, 4-pair 3’ (1m) Grey

NV-DPSC4: Detachable Power Supply Cord Splitter 1:4 2ft

NV-RMEC16 Rack mounting chassis, 19” x 1U

Holds up to 4 NV-EC1701 transceivers
plus 60W or 90W power supplies.
Includes NV-DPSC4 Power Cord Splitter
(Transceivers and power supplies not included)

Network Video Technologies

(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Page 3 of 5
 NV-EC1701 TRANSCEIVER KITS

Single 60 Watt EoC Transmission System

NV-EC1701-KIT1: 2 NV-EC1701 Transceivers
1 NV-PS56-60W Power Supply
with IEC line cord
2 NV-PC4PR patch-cord

Single 90 Watt EoC Transmission System

NV-EC1701-K1H: 2 NV-EC1701 Transceivers
1 1 NV-PS56-90W Power Supply
with IEC line cord
2 NV-PC4PR patch-cord

Dual 60 Watt EoC Transmission System

NV-EC1701-KIT2: 3 NV-EC1701 Transceivers
1 NV-PS56-60W Power Supply
with IEC line cord
1 NV-BNCT BNC “T” Adaptor
3 NV-PC4PR patch-cord

Dual 90 Watt EoC Transmission System

NV-EC1701-K2H: 3 NV-EC1701 Transceivers
1 NV-PS56-90W Power Supply
with IEC line cord
1 NV-BNCT BNC “T” Adaptor
3 NV-PC4PR patch-cord

Triple 60 Watt EoC Transmission System

NV-EC1701-KIT3: 4 NV-EC1701 Transceivers
1 NV-PS56-60W Power Supply
with IEC line cord
1 NV-EC4BNC 1:4 BNC splitter adaptor
4 NV-PC4PR patch-cord

Triple 90 Watt EoC Transmission System

NV-EC1701-K3H: 4 NV-EC1701 Transceivers
1 NV-PS56-90W Power Supply
with IEC line cord
1 NV-EC4BNC 1:4 BNC splitter adaptor
4 NV-PC4PR patch-cord

Quadruple 60 Watt EoC Transmission System

NV-EC1701-KIT4: 5 NV-EC1701 Transceivers
1 NV-PS56-60W Power Supply
with IEC line cord
1 NV-EC4BNC 1:4 BNC splitter adaptor
5 NV-PC4PR patch-cord

Quadruple 90 Watt EoC Transmission System

NV-EC1701-K4H: 5 NV-EC1701 Transceivers
1 NV-PS56-90W Power Supply
with IEC line cord
1 NV-BNCT BNC “T” Adaptor
5 NV-PC4PR patch-cord

Page 4 of 5
 NV-EC1701 POWER DATA DISTANCE CHART

The distance capability of wire is dependant on its ability to deliver DC power, and separately, to deliver high-
frequency data signals.
The graph below shows maximum power delivery when using a 56V power supply. If you are locally powering
your camera (or other remote device), then this graph does not apply. The graph on the next page shows the
maximum data delivery rate.

A Distance Calculator can be found at www.nvt.com.

PoE devices require a minimum of 43V to operate. With a 56V supply, we have up to 13V of allowable
voltage drop on the wire.

The voltage will dip in proportion to the remote (camera) load. The graph below shows what PoE power
distances are supported for various loads and wire types.

• Start with the camera wattage at the left. Sometimes IP cameras are listed as to their PoE Class rather
than wattage.

• Now read over to the right until you find your kind of wire. Then look up (feet) or down (meters) to find your
maximum distance.

• If your wire is not among the examples, simply measure its total resistance and find the value on the right
side of the graph. The maximum supported wattage is on the left.

• There are a wide variety of wire qualities, from copper-plated steel at the low end (CATV wire) to high
performance low-loss pure copper. The graph below will help you determine your data throughput as a func-
tion of wire type and distance.

NV-EC1701 Power Data Distance

13,120 ft
16,400 ft
1,312 ft
1,640 ft
1,968 ft

2,624 ft
3,280 ft
3,936 ft
4,920 ft
5,904 ft
6,560 ft
8,200 ft
9,840 ft
131 ft
164 ft
197 ft

262 ft
328 ft
397 ft
492 ft
590 ft
656 ft
820 ft
984 ft
98 ft

50 W 3Ω
40 W 4Ω
30 W High
High
hPPower
ower
w
wer 6Ω

Total Wire Resistance

25 W 7Ω
R
Camera Wattage

G
11

20 W 9Ω
14

18 W
AW
RG

PoE Class
PoE C 4
G

15 W 11 Ω
6
RG

18

12 W 12 Ω
59
RG

AW
/U

G
59

10 W 14 Ω
20
CA

/U

AW
TV

22

8.0 W 16 Ω
CA

G
20

PoE
ECClass 3
AW
TV

AW

6.0 W 19 Ω
22

G
AW

5.0 W 21 Ω
P E Class
PoE C 2
G

4.0 W 23 Ω
3.0 W 24 Ω
2.5 W
P EC
PoE Class 1
Data Limited

2.0 W 28 Ω

0W 38 Ω
30 m
40 m
50 m
60 m

80 m
100 m
120 m
150 m
180 m
200 m
250 m
300 m
400 m
500 m
600 m

800 m
1,000 m
1,200 m
1,500 m
1,800 m
2,000 m
2,500 m
3,000 m
4,000 m
5,000 m

Network Video Technologies

(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Copyright © 2014 NVT, Inc.
Page 5 of 5 411-1701-1-E3