Rigdon K50 Diesel Electric Parts List

K50 LEFT SIDE PARTS OVERVIEW

AIR
CLEANER
MINDER

THERMOCOUPLE

ENGINE
JACKET
HARNESS
WATER OIL PSI DIFFER.
TEMP
OIL PSI

WATER
PSI FUEL inHG

OIL TEMP
DEM-4 VIBRACON
MOUNTS
DCU305-- K50 INSTRUMENT PANEL COMPLETE ASSEMBLY

101000 101001 75410

75268

A B

50136 50137

10043 7702
6405 -- DCU 305 DISPLAY *UNCONFIGURED* MUST BE CONFIGURED BEFORE
INSTALLED
101000 – INOR MINIPAQ-L – K-TYPE 100-1500 F SIGNAL CONDITIONER - SEE SLIDE 46
101001 – INOR MINIPAQ-L- PT100, 32-212 F SINGAL CONDITIONER - SEE SLIDE 46

101000 101000 101001 101001

75268 - AK6 ANALOG EXPANSION MODULE- SEE SLIDE 46 (2A17)

75268
75410 -- RK66 WIRE TERMINAL BOARD – SEE SLIDE 48

75410
50136(A) – HELLA 4RD 003 520-071 – START RELAY-SEE SLIDE 46 (2K36)
50136(B) – HELLA 4RD 003 520-071 – STOP RELAY-SEE SLIDE 46 (2K36)

50136(A) 50136(B)
50137(A) – MAIN POWER ON RELAY 24V/10A – SEE SLIDE 47 (2K41)
50137(B) – SECONDARY POWER ON RELAY – SEE SLIDE 47 (2K43)

50137(A) 50137(B)
10043(A) – 16A MAIN POWER CIRCUIT BREAKER- SEE SLIDE 47(2Q42)
10043(B) – 16A AUXILIARY/SECONDARY CIRCUIT BREAKER – SEE SLIDE
47(2Q44)

10043(A) 10043(B)
7702 -- ANYBUS MODULE HMS *UNCONFIGURED* MUST BE CONFIGURED
BEFORE INSTALLED

7702
8273-501 – WOODWARD GOVERNOR- Mounted to the switchgear provided by
CMLS. EPD mounts and wires the 2301D.

8273-501
0538009 – KTA50 ENGINE HARNESS VSW2701-31-12 – VERSA VALVE
061B813966 -- COOLANT TEMP SWITCH (SEE SLIDE 20) DEM-4 – DEMISTER ASSY
061B006766 OIL PRESSURE SWITCH (SEE SLIDE 20)
060G3747 FUEL PRESS SEN
060G3748 – CYLINDER WATER PSI SENSOR

061B006766
061B183966
060G3748

0538009

060G3747
VSW2701-31-12

DEM-4
DEM-4 -- DEMISTER ASSEMBLY

DEM-4
VSW2701-31-12 VERSA VALVE

VSW2701-31-12
060G3748 – CYLINDER WATER PSI SENSOR
0538009 – K50 ENGINE WIRING HARNESS

0538009

060G3748
060G3747 – FUEL FILTER RESTRICTION SENSOR

060G3747
061B006766 – OIL PRESSURE SWITCH
060G3749 – OIL TEMP SENSOR
3866089 – OIL DIFFERENTIAL PRESSURE SENSOR

3866089

061B006766

060G3749
060G3749 – LUBE OIL TEMP SENSOR

060G3749
061B006766 -- LOW SPEED OIL PRESSURE SWITCH (middle)
061B006766 – HIGH SPEED OIL PRESSURE SWITCH (right)
061B813966 – COOLANT TEMP SWITCH (left) danfoss inc

061B813966 061B006766
4498 – RADIATOR CAP

4498
5511-4 – FILLER NECK

5511- 4
3179035 – GASKET WTR TRF CONNECTION
084Z4053 – COOLANT TEMP TRANSDUCER

3179035

3179035

3179035

084Z4053
084Z4053 – ATERCOOLER WATER TEMP TRANSDUCER
084Z3033 – TEMP TRANSDUCER POCKET
060G0008 -- DINPLUG

060G0008 084Z4053

084Z3033
084Z4053 – JACKET WATER TEMP. TRANSDUCER
061B810466 – COOLANT TEMP SWITCH

061B810466
084Z4053
ENGINE PARTS REVIEW RIGHT SIDE

AIR
CLEANER
MINDER

AFTERCOOLER
WATER TEMP
ENGINE
SPEED
VALVE R/I

SOLENOID
VALVE

STARTER

DEM-4
E1201101/NB11 – INDUSTRIAL THERMOCOUPLE

E1201101/NB11
123824 – THREADED OIL PAN PLUG

123824
DEM-4 -- DEMISTER

DEM- 4
SS815GB03R31 – AIR STARTER
CTT50ASB – K50 AIR STARTER BRACES
SS800-A674 MUFFLER
HDL-2 -- LUBRICATOR
SRV150 -- RELAY VALVE

CTT50ASB

SS815GB03R31

HDL-2
SRV150
SS800-A674
SMB-618 -- VALVE R/I
3034573 – ENGINE FLYWHEEL MAGNETIC PICKUP
150BMP-2451B – SOLENOID VALVE

3034573

SMB-618

150BMP-
2451B
3034573 – ENGINE FLYWHEEL MAGNETIC PICKUP

3034573
12FSP3025STD – 12”AM. BOA EXHAUST FLEX
BW12G – 12”150-316-GRAF EXHAUST GASKET

BW12G

12FSP3025STD

BW12G
49486U – EXHAUST SILENCER/MUFFLER

49486U
Q71686-A – AIR FILTER ELMENT (QTY:2)

Q71686-A
9001010 – K50 A/C SUPPORT BRACKET

9001010
39055161-S – MINDER GAGE (QTY: 2)

39055161-S
AVK2636 – 1235 GENERATOR
SM30CS – VIBRACON MOUNTS

AVK2636

SM30CS
DECS-10-A11, PANEL REMOVED FROM GENERATOR
910060916 --AVK AIR TEMPERATURE DIFFERENTIAL PRESSURE SENSOR
910032811 -- AVK BEARING TEMPERATURE SENSOR – NOT SHOWN

910060916
CM-8000-SCE-7021 – CENTA TORSIONAL COUPLING

CM-8000-
SCE-7021
SM30CS – VIBRACON MOUNTS

SM30CS
TSC T10 65/500 – VIBRATION ISOLATORS - ENGINE TO VESSEL MOUNTING

TSC T10 65/500

3883223 – NOISE ISOLATOR - FOR MOUNTING OF INSTRUMENT PANEL
3034858 – MOUNTING SPACER - FOR MOUNTING OF INSTRUMENT PANEL

3034858

3883223
3631276 – DAMPER GUARD
3001954 – CENTER DAMPER GUARD

361276

3001954
 K50 CONTROL PANEL DISCRIPTION AND FUNCTION

Component Description
With reference to Auto-Maskin drawing 1857 revision 2.

Ref Description Signal/Comment

101000 Signal converter from Thermocouple to 4-20mA Left Exh Temp

101000 Signal converter from Thermocouple to 4-20mA Right Exh Temp

75268 Analog expansion unit. Has input for Oil Temp, After cooler
water IN Temp, Jacket/Cyl water temp, Exhaust
thermocouple, and Non Drive and Bearing PT100

101001 Signal converter from PT100 to 4-20mA Drive end bearing

101001 Signal converter from PT100 to 4-20mA NON drive end bearing

2A46 Diesel engine control and monitoring unit

50136 Relay Start

50136 Relay Stop

 K50 CONTROL PANEL DISCRIPTION AND FUNCTION

50137 Relay that activates when the main battery/supply is connected. If not Main Power-On Relay.
activated, the primary supply is disconnected from the DCU on
2U25.1, and the secondary supply will be routed in to feed the
system. The DCU gives the “Primary Power Failure” alarm.

50137 Relay that activates when the secondary battery/supply is connected. Secondary Power-On Relay
If not activated, will alarm the DCU by disconnecting the
secondary supply line to the DCU; 2U25.3. The DCU gives the
“Secondary Power Failure” alarm.

2P48 Signal Converter. Converts from Modbus RTU (RS-232) to Modbus

TCP (Modbus on Ethernet).

10043 16A main power fuse.

10043 16A auxiliary/secondary power fuse.

2R40 10k resistor used for wire break detection. A 10k resistor shall be mounted across
all NO switches used for automatic
stop (shutdown).
 K50 CONTROL PANEL DISCRIPTION AND FUNCTION

2S39 Shutdown “mushroom”. Press for immediate 2U25.43 is the crank output
shutdown. Works by closing the contact into signal.
2U25.11 (shutdown) and opening the
contact into 2U25.43 (thereby disabling
crank).

75410 The wire terminal card for the diesel engine

control unit 2A46.

2W23 Wire Harness. Signaling between 2A17 (AK-6) 15p DSUB connector.
and 2A46 (DCU).

2W45 Wire Harness. Signaling between 2P48 (Signal 9p DSUB connector.

Converter) and 2A46 (DCU).

2W46 Wire Harness. Signaling between 2U25 (RK-66) 2x 25p DSUB connectors.
and 2A46 (DCU).

C1 Deutsch connector for engine signal interface.

C2 Deutsch connector for engine signal interface.