HD8100MB
High Density Polyethylene Black Compound Resin
LT
Special Characteristics
R
PlastMate HD8100MB is a high density polyethylene black pipe compound grade which is certified as a MRS 10.0 (PE100).
A
It is bimodal resins exhibit excellent processability, high thermal stability, good dispersion of carbon black and good chemical
resistance properties. They are suitable for high quality pressure pipes, produced by conventional pipe extrusion process.
PO
Typical Application : Pressure pipes , Drinking water pipes, Industrial pipes and Sewer pipes.
Typical Properties :
LY
Properties Typical Value Unit Test Method
M
Physical and Mechanical Properties
ER
Melt Flow Rate (190 oC, 5 kg) 0.25 g/10 min ISO 1133
Density 0.960 g/cm3 ISO 1183
Tensile Strength @ Yield 23 MPa ISO 527
C
Tensile strength @ Break > 30 MPa ISO 527
O
Elongation @ Break > 600 % ISO 527
R
Stiffness 8000 kg/cm2 ASTM D747
Flexural Modulus 10500 kg/cm2 ASTM D790
PO
Carbon Black Content 2.25 % wt ISO 6964
Carbon Black dispersion <3 - ISO 18553
R
Notched Izod Impact Strength 50 (NB)* kg.cm/cm ASTM D256
A
Durometer Hardness 64 Shore D ASTM D2240
TI
ESCR , F50 (Condition B, 25 % Igepal) >2000 Hours ASTM D1693
Oxidative Induction Time (OIT, 210 oC) > 40 Minutes ISO 11357-6
O
MRS Classification 10.0 (PE100) MPa ISO12162/ ISO 9080
N
Resistance to crack growth (@ 80 oC) > 500 Hour ISO 13479
Rapid crack propagation, Pc, S4 > 10** Bar ISO 13477
C
O
.,
LT
D
.
* NB = Non Break
** Tested on 110 mm OD pipe
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4488 Fax: 66 2140 4333 Revised Date : Oct, 2021
Page 1/2
HD8100MB
U
High Density Polyethylene Black Compound Resin
LT
Recommendation :
R
Preheat condition : 2 hours at 80 oC
Extruder temperature : 180 - 200 oC
A
Die temperature : 190 - 210 oC
PO
FDA Statement :
HDPE black compound under the brand Plastmate complies with U.S. FDA 21 CFR 177.1520 (c) (2.1) and (2.2) regulation for
LY
polyethylene used in articles that contact food suitable for drinking water pipes.
M
Disclaimer :
ER
This Applications specified herein is for reference only and not suitable for using in the manufacturing of any products in medical and pharmaceutical sectors.
• Determination of suitability of the product for the use and purpose shall be the customer’s responsibility. Customer is obligated to inspect and test the product for such suitability.
Customer is responsible for appropriate, safe, legal use processing and handling of the product.
• To our best knowledge, information contained herein is true and accurate as of the date of its publication. However, we make no representations or warranties with respect to accuracy,
C
reliability and completeness of the information contained herein for any purpose.
• No warranties, express or implied, which extend beyond the description herein are given by us. Nothing herein shall constitute any implied warranty of merchantability or fitness for
O
a particular purpose.
• We assume no liability for any use of the product in combination with other materials. The information contained herein entirely relates to the product when it is not used in combination with
R
any third party’s materials.
PO
R
A
TI
O
N
C
O
.,
LT
D
.
Note : Properties reported here are typical values of the product, not to be considered as specifications.
PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4488 Fax: 66 2140 4333 Revised Date : Oct, 2021
Page 2/2
