US

SAFETY DATA SHEET

HD CSN28
Section 1. Identification
GHS product identifier : HD CSN28
Other means of : Not available.
identification
Product type : Solid.
Product code : CSN2805000
SDS # : 1654
Relevant identified uses of the substance or mixture and uses advised against
Product use: For : Industrial applications: Lubricants: grease.
professional use only.

Manufacturer : Chemtool Incorporated

801 West Rockton Road
Rockton, IL 61072 U.S.A.
Tel: 815.957.4140
Fax: 815.624.0292

Emergency telephone : INFOTRAC

number U.S. and Canada - 800.535.5053
Outside the U.S. and Canada - +1 352.323.3500

Section 2. Hazards identification

OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the
safe handling and proper use of the product. This SDS should be retained and available
for employees and other users of this product.
Classification of the : Not classified.
substance or mixture
Percentage of the mixture consisting of ingredient(s) of unknown oral toxicity: 3.7%
Percentage of the mixture consisting of ingredient(s) of unknown dermal toxicity: 10.5%
Percentage of the mixture consisting of ingredient(s) of unknown inhalation toxicity: 10.
5%

GHS label elements

Signal word : No signal word.
Hazard statements : No known significant effects or critical hazards.
Precautionary statements
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Not applicable.

Validated on 9/17/2020. 1/11

HD CSN28 SDS # : 1654

Section 2. Hazards identification

Hazards not otherwise : None known.
classified

Section 3. Composition/information on ingredients

Substance/mixture : Mixture
Other means of : Not available.
identification

Ingredient name % CAS number

Mineral Oil ≤10 -
Sulfonic acids, petroleum, calcium salts ≤5 61789-86-4
diboron calcium tetraoxide ≤5 13701-64-9
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Occupational exposure limits, if available, are listed in Section 8.

Section 4. First aid measures

Description of necessary first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur.
Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes.
Get medical attention if symptoms occur.
Ingestion : Wash out mouth with water. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless
directed to do so by medical personnel. Get medical attention if symptoms occur.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Validated on 9/17/2020. 2/11
HD CSN28 SDS # : 1654

Section 4. First aid measures

Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.

See toxicological information (Section 11)

Section 5. Fire-fighting measures

Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

Specific hazards arising : No specific fire or explosion hazard.

from the chemical
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
metal oxide/oxides

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Move containers from spill area. Vacuum or sweep up material and place in a
designated, labeled waste container. Dispose of via a licensed waste disposal contractor.
Large spill : Move containers from spill area. Prevent entry into sewers, water courses, basements or
confined areas. Vacuum or sweep up material and place in a designated, labeled waste
container. Dispose of via a licensed waste disposal contractor. Note: see Section 1 for
emergency contact information and Section 13 for waste disposal.

Validated on 9/17/2020. 3/11

HD CSN28 SDS # : 1654

Section 7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8).
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected from
including any direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
incompatibilities (see Section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. See Section 10 for incompatible
materials before handling or use.

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits
Ingredient name Exposure limits
Mineral Oil ACGIH TLV (United States, 3/2017).
TWA: 5 mg/m³ 8 hours. Form: Inhalable
fraction
OSHA PEL (United States, 6/2016).
TWA: 5 mg/m³ 8 hours.
NIOSH REL (United States, 10/2016).
TWA: 5 mg/m³ 10 hours. Form: Mist
STEL: 10 mg/m³ 15 minutes. Form: Mist
Sulfonic acids, petroleum, calcium salts None.
diboron calcium tetraoxide None.

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure they
controls comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: safety glasses with side-shields.
Skin protection

Validated on 9/17/2020. 4/11

HD CSN28 SDS # : 1654

Section 8. Exposure controls/personal protection

Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.

Section 9. Physical and chemical properties

Appearance
Physical state : Solid. [grease]
Color : Tan.
Odor : Mild. Petroleum oil
pH : Not applicable.
Melting point : Not available.
Boiling point : Not available.
Flash point : Not available.
Evaporation rate : Not available.
Flammability (solid, gas) : Flammable in the presence of the following materials or conditions: open flames, sparks
and static discharge and heat.
Lower and upper explosive : Not available.
(flammable) limits
Vapor pressure : Not available.
Vapor density : Not available.
Density : 0.96 g/cm³
Solubility : Insoluble in the following materials: cold water.
Partition coefficient: n- : Not available.
octanol/water
Auto-ignition temperature : Not available.
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): >0.21 cm2/s (>21 cSt)
VOC : 0 g/L
VOC Method : ASTM E 1868

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : The product is stable.

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Validated on 9/17/2020. 5/11

HD CSN28 SDS # : 1654

Section 10. Stability and reactivity

Conditions to avoid : No specific data.

Incompatible materials : No specific data.

Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
products not be produced.

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
Mineral Oil LD50 Dermal Rabbit >5000 mg/kg -
LD50 Oral Rat >5000 mg/kg -
Sulfonic acids, petroleum, LD50 Dermal Rabbit >5 g/kg -
calcium salts
LD50 Oral Rat >5 g/kg -
Conclusion/Summary : No known significant effects or critical hazards.
Irritation/Corrosion
Conclusion/Summary
Skin : No known significant effects or critical hazards.
Eyes : No known significant effects or critical hazards.
Respiratory : No known significant effects or critical hazards.
Sensitization
Conclusion/Summary
Skin : No specific information is available in our database regarding the skin sensitizing
properties of this product. Sensitization not suspected for humans.
Respiratory : Sensitization not suspected for humans.
Mutagenicity
Conclusion/Summary : There are no data available on the mixture itself. Mutagenicity not suspected for humans.
Carcinogenicity
Conclusion/Summary : There are no data available on the mixture itself. Carcinogenicity not suspected for
humans.
Reproductive toxicity
Conclusion/Summary : There are no data available on the mixture itself. Not considered to be dangerous to
humans, according to our database.
Teratogenicity
Conclusion/Summary : There are no data available on the mixture itself. Teratogenicity not suspected for
humans.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.

Aspiration hazard
Name Result
Mineral Oil ASPIRATION HAZARD - Category 1

Validated on 9/17/2020. 6/11

HD CSN28 SDS # : 1654

Section 11. Toxicological information

Information on the likely : Routes of entry anticipated: Oral, Dermal.
routes of exposure
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Conclusion/Summary : No known significant effects or critical hazards.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Not available.

Section 12. Ecological information

Toxicity
Conclusion/Summary : There are no data available on the mixture itself.
Persistence and degradability
Conclusion/Summary : Not readily biodegradable.
Product/ingredient name Aquatic half-life Photolysis Biodegradability
HD CSN28 - - Not readily

Bioaccumulative potential
Not available.
Validated on 9/17/2020. 7/11
HD CSN28 SDS # : 1654

Section 12. Ecological information

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)
Other adverse effects : No known significant effects or critical hazards.

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
local authority requirements. Dispose of surplus and non-recyclable products via a
licensed waste disposal contractor. Waste should not be disposed of untreated to the
sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid dispersal
of spilled material and runoff and contact with soil, waterways, drains and sewers.

Section 14. Transport information

DOT TDG Mexico ADR/RID IMDG IATA
Classification Classification Classification
UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. Not regulated.

UN proper - - - - - -
shipping name
Transport - - - - - -
hazard class(es)

Packing group - - - - - -
Environmental No. No. No. No. No. No.
hazards

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.

Transport in bulk according : Not available.

to Annex II of MARPOL and
the IBC Code

Section 15. Regulatory information

U.S. Federal regulations : TSCA 8(a) PAIR: diphenylamine
TSCA 8(a) CDR Exempt/Partial exemption: Not determined

Clean Air Act Section 112 : Not listed

(b) Hazardous Air
Pollutants (HAPs)

Validated on 9/17/2020. 8/11

HD CSN28 SDS # : 1654

Section 15. Regulatory information

Clean Air Act Section 602 : Not listed
Class I Substances
Clean Air Act Section 602 : Not listed
Class II Substances
DEA List I Chemicals : Not listed
(Precursor Chemicals)
DEA List II Chemicals : Not listed
(Essential Chemicals)
SARA 302/304
Composition/information on ingredients
No products were found.

SARA 304 RQ : Not applicable.

SARA 311/312
Classification : Not applicable.
Composition/information on ingredients
Name % Classification
Mineral Oil ≤10 ASPIRATION HAZARD - Category 1
Sulfonic acids, petroleum, ≤5 SKIN SENSITIZATION - Category 1B
calcium salts
diboron calcium tetraoxide ≤5 SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
SARA 313
Product name CAS number %
Form R - Reporting No listed substance
requirements
Supplier notification No listed substance

State regulations
Massachusetts : The following components are listed: OIL MIST, MINERAL; OIL MIST, MINERAL; OIL
MIST, MINERAL
New York : None of the components are listed.
New Jersey : None of the components are listed.
Pennsylvania : None of the components are listed.
California Prop. 65
This product does not require a Safe Harbor warning under California Prop. 65.
None of the components are listed.
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol (Annexes A, B, C, E)
Not listed.

Stockholm Convention on Persistent Organic Pollutants

Not listed.

Rotterdam Convention on Prior Informed Consent (PIC)

Validated on 9/17/2020. 9/11

HD CSN28 SDS # : 1654

Section 15. Regulatory information

Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals

Not listed.

Inventory list
Australia : All components are listed or exempted.
Canada : All components are listed or exempted.
China : All components are listed or exempted.
Europe : All components are listed or exempted.
Japan : All components are listed or exempted.
New Zealand : All components are listed or exempted.
Philippines : All components are listed or exempted.
Republic of Korea : All components are listed or exempted.
Taiwan : All components are listed or exempted.
United States : All components are listed or exempted.

Section 16. Other information

Hazardous Material Information System (U.S.A.)
Health / 1

Flammability 1

Physical hazards 0

Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS®
ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
National Fire Protection Association (U.S.A.)

1 Flammability
Health 1 0 Instability/Reactivity
Special

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to
be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in
NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by
NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.
Procedure used to derive the classification

Validated on 9/17/2020. 10/11

HD CSN28 SDS # : 1654

Section 16. Other information

Classification Justification
Not classified.

History
Date of issue/Date of : 9/17/2020
revision
Date of previous issue : 9/17/2020
Version : 2.07
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as
modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
References : Not available.
Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.

Validated on 9/17/2020. 11/11