Partner for Performance

EN Tech Paper 03.2020

Locking Assemblies
RINGFEDER® RfN 7012.2
Large transmittable forces and moments

self-centering without axial displacement with low surface pressure

L Dimensions Location
LN ≥ 2 · L3

L1

L3

ø DN
D
d

Locking Assembly dimensions Transmissible torques or Surface pressure Locking screws DN min at Rp0,2
axial forces
 Shaft Hub 200 300 400
d x D L L1 L3 T Fax pW pN nSc DG TA Gw [N/mm2] Tmax
mm mm Nm kN N/mm2 Nm kg mm Nm
130 x 180 52 38 34 22568 347 208 150 19 M12 x 35 145 3,51 294 247 227 29558
140 x 190 52 38 34 29285 418 233 172 23 M12 x 35 145 3,85 337 273 248 38533
150 x 200 52 38 34 31242 417 217 162 23 M12 x 35 145 4,07 342 281 257 41286
160 x 210 52 38 34 36077 451 220 168 25 M12 x 35 145 4,3 366 299 272 47868
170 x 225 60 44 38 43873 516 212 160 21 M14 x 40 230 5,78 381 315 288 58433
180 x 235 60 44 38 50697 563 218 167 23 M14 x 40 230 6,05 409 334 305 67763
190 x 250 68 52 46 62608 659 200 152 27 M14 x 45 230 8,25 410 343 316 83967
200 x 260 68 52 46 68125 681 196 151 28 M14 x 45 230 8,65 425 356 328 91660
220 x 285 74 56 50 89763 816 197 152 25 M16 x 50 355 11,22 467 391 360 121495
240 x 305 74 56 50 101288 844 187 147 26 M16 x 50 355 12,2 490 414 383 137841
260 x 325 74 56 50 125978 969 198 158 30 M16 x 50 355 13,2 545 452 415 172302
280 x 355 86,5 66 60 157579 1126 178 140 29 M18 x 60 485 19,2 557 475 440 216523
300 x 375 86,5 66 60 173905 1159 171 137 30 M18 x 60 485 20,5 581 497 463 239989
320 x 405 100,5 78 72 239969 1500 173 136 30 M20 x 70 690 29,6 627 537 499 332496
340 x 425 100,5 78 72 262469 1544 167 134 31 M20 x 70 690 31,1 651 560 522 365053
360 x 455 116 90 84 349828 1943 170 135 32 M22 x 80 930 42,2 700 601 560 488295
380 x 475 116 90 84 379517 1997 166 133 33 M22 x 80 930 44 725 625 582 531530
400 x 495 116 90 84 410280 2051 162 131 34 M22 x 80 930 46 751 648 605 576460
420 x 515 116 90 84 467378 2226 167 136 37 M22 x 80 930 50 797 682 635 658690
440 x 545 130 102 96 574502 2611 164 132 37 M24 x 90 1200 64,6 769 716 668 812021
460 x 565 130 102 96 615138 2675 161 131 38 M24 x 90 1200 67,4 856 740 690 871875
480 x 585 130 102 96 657024 2738 158 129 39 M24 x 90 1200 71 882 763 713 933724
500 x 605 130 102 96 717664 2871 159 131 41 M24 x 90 1200 72,6 918 792 739 1022508
520 x 630 130 102 96 762703 2933 156 129 42 M24 x 90 1200 80 948 821 767 1089345
540 x 650 130 102 96 808986 2996 153 127 43 M24 x 90 1200 82 973 844 790 1158177
560 x 670 130 102 96 875976 3128 154 129 45 M24 x 90 1200 85 1009 873 816 1256937

To continue see next page

www.ringfeder.com 1
Partner for Performance

EN Tech Paper 03.2020

Locking Assemblies RINGFEDER® RfN 7012.2

Locking Assembly dimensions Transmissible torques or Surface pressure Locking screws DN min at Rp0,2
axial forces
 Shaft Hub 200 300 400
d x D L L1 L3 T Fax pW pN nSc DG TA Gw [N/mm2] Tmax
mm mm Nm kN N/mm2 Nm kg mm Nm
580 x 690 130 102 96 945507 3260 155 131 47 M24 x 90 1200 88 1045 902 842 1359686
600 x 710 130 102 96 996807 3323 153 129 48 M24 x 90 1200 91 1070 926 865 1436499
620 x 730 130 102 96 1049341 3385 151 128 49 M24 x 90 1200 93 1096 950 888 1515307
640 x 750 130 102 96 1147229 3585 155 132 52 M24 x 90 1200 96 1142 984 918 1659954
660 x 770 130 102 96 1226223 3716 156 133 54 M24 x 90 1200 99 1177 1013 944 1777667
680 x 790 130 102 96 1261026 3709 151 130 54 M24 x 90 1200 102 1192 1031 963 1831536
700 x 810 130 102 96 1295765 3702 146 126 54 M24 x 90 1200 104 1208 1050 982 1885405
720 x 830 130 102 96 1330443 3696 142 123 54 M24 x 90 1200 107 1224 1068 1001 1939274
740 x 850 130 102 96 1415618 3826 143 124 56 M24 x 90 1200 110 1259 1097 1028 2066962
760 x 870 130 102 96 1503294 3956 144 126 58 M24 x 90 1200 113 1294 1126 1054 2198641
780 x 890 130 102 96 1566909 4018 142 125 59 M24 x 90 1200 116 1320 1149 1077 2295406
800 x 910 130 102 96 1631741 4079 141 124 60 M24 x 90 1200 118 1345 1173 1099 2394165

More sizes on request

To continue see next page

www.ringfeder.com 2
Partner for Performance

EN Tech Paper 03.2020

Locking Assemblies RINGFEDER® RfN 7012.2

Explanation

d = Inner diameter Fax = Transmissible axial force Gw = Weight

D = Outer diameter pW = Surface pressure on shaft at given TA DN min = Min. hub outer diam. depending of the
L = Overall length pN = Surface pressure on hub at given TA given hub yield point Rp0,2

L1 = Overall length (without screws) nSc = Quantity of screws Tmax = Max. transmissible torque

L3 = Width of ring DG = Thread

T = Transmissible torque at given TA TA = Tightening torque of the clamping screws

Technical Information
The Locking Assemblies are supplied slightly oiled and ready-to-use. The values for A reduction of the screw tightening torque is possible. Please contact our specialists
T, Fax, pW and pN apply to Locking Assemblies in delivery condition. for assistance.
Surface finishes: For shaft and hub bore Ra ≤ 3,2 µm To facilitate removal, the front thrust rings have auxiliary threads.
Tolerances: Shaft: k9-h9 · Hub: N9-H9 The outside diameter of the hub is calculated with factor C3 = 0.6. (see chapter
„Calculation“ in Product Paper & Tech Paper „RINGFEDER® Locking Assemblies“).
Max. permissible: Shaft: k11-h11; Hub: N11-H11
To avoid excessive deformations of the relatively thickwalled thrust rings, the
Locking Assembly should be located as symmetrically as possible between shaft
and hub bore. If the shaft is smaller than nominal d, the bore should exceed nominal
D to the same extent and vice versa. The concentricity quality is determined by the
direct centering between shaft and hub.
If several Locking Assemblies are to be installed the transmission values of the
table can be added when the Locking Assemblies are located within a distance of
4·L.

Ordering example

Locking assembly d D

RfN 7012.2 200 260

Further information on
RINGFEDER® RfN 7012.2
on www.ringfeder.com

Disclaimer of liability
All technical details and notes are non-binding and cannot be used as a basis for legal claims. The user is obligated
to determine whether the represented products meet his requirements. We reserve the right carry out modifications
at any time in the interests of technical progress.

www.ringfeder.com 3