2.54mm Crimp Housing: Wire To Board

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

2.

54mm Crimp Housing


Wire to Board

Specifications:
Current Rating : 3A AC/DC
Voltage Rating : 250V AC/DC
Maximum Contact Resistance : 20mΩ
Minimum Insulation Resistance : 1,000MΩ
Withstanding Voltage : 1,000V AC/Minute
Operating Temperature Range : -40°C to +105°C

Material and Finish:


Insulator : Nylon 66
Insulator Colour : Beige
Contact : Brass
Plating : Tin Plated

2.54mm Crimp Housing

Dimensions : Millimetres

www.element14.com
www.farnell.com
www.newark.com

Page <1> 14/10/13 V1.0


2.54mm Crimp Housing
Wire to Board

Specifications:
Material : Contact Brass
Finish : Tin Plated
Application Wires : 22 to 26AWG

Accessories - Crimp Pin

Dimensions : Millimetres

Part Number Table


No. of
Description A B Part Number
Position
Crimp Housing, 2.54mm, 2Way 2 2.54 5.6 MC34481
Crimp Housing, 2.54mm, 3Way 3 5.08 8.1 MC34483
Crimp Housing, 2.54mm, 4Way 4 7.62 10.7 MC34485
Crimp Housing, 2.54mm, 5Way 5 10.16 13.2 MC34503
Crimp Housing, 2.54mm, 6Way 6 12.7 15.8 MC34487
Crimp Housing, 2.54mm, 8Way 8 17.78 20.9 MC34489
Crimp Housing, 2.54mm, 10Way 10 22.86 25.9 MC34491
Crimp Housing, 2.54mm, 12Way 12 27.94 31 MC34529
Contact, Crimp, Plug, 26-22AWG (Cut) - - - 2218T

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.

www.element14.com
www.farnell.com
www.newark.com

Page <2> 14/10/13 V1.0

You might also like