1.

0SMB SERIES

Transient Voltage Suppressors (TVS) Data Sheet

Features

■ For surface mounted applications in order to optimize board space

■ Low profile package
■ Built-in strain relief
■ Glass passivated junction
■ Low inductance
■ Excellent clamping capability
■ 1000W peak pulse power capability at 10/1000μs waveform,
repetition rate (duty cycle): 0.01%
■ Fast response time
■ Typical IR less than 1μA above 12V
■ High Temperature soldering: 260°C/10 seconds at terminals
■ Plastic package has underwriters laboratory flammability 94V-0
■ Meets MSL level 1, per J-STD-020
■ IEC61000-4-2 ESD 30KV Air, 30KV contact compliance

Mechanical Data

■ Case: JEDEC DO-214AA. Molded plastic over glass passivated junction

■ Terminal: Tin plated, solderable per MIL-STD-750, Method 2026
■ Polarity: Color band denotes cathode except bi-directional models
■ Standard Packaging: 12mm tape (EIA STD RS-481)
■ Weight: 0.10g

Applications

■ I/O interface ■ AC/DC power supply

■ Low frequency signal transmission line (RS232, RS485, etc.)

Revision:TVS-1.0SMB SERIES-001(A3) 1 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Maximum Ratings and Characteristics

Ratings at 25℃ ambient temperature unless otherwise specified.

Rating Symbol Value Units
Peak pulse power dissipation at 10/1000μs waveform Minimum
PPPM Watts
(Note1, Note2, Fig.1) 1000
Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3) IPPM See Table Amps
Steady state power dissipation at TA=50°C (Fig.5) PM(AV) 5.0 Watts
Peak forward surge current, 8.3ms single half sine-wave
IFSM 100 Amps
superimposed on rated load, (JEDEC Method) (Note3, Fig.6)
Operating junction and Storage Temperature Range. TJ,TSTG -55 to +150 °C
Typical thermal resistance junction to lead RθJL 20 °C /W
Typical thermal resistance junction to ambient RθJA 100 °C /W
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2.
2. Mounted on 5.0mm×5.0mm (0.03mm thick) copper pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.

Dimensions (SMB/DO-214AA)

Product: Millimeters Inches

Symbol
Cathode Band Min. Max. Min. Max.

L 4.06 4.57 0.160 0.180

D1 D
D 3.30 3.94 0.130 0.155

L
D1 1.95 2.20 0.077 0.086

T 5.21 5.59 0.205 0.220

H1 H
d T1 T1 0.76 1.52 0.030 0.060
T
Pad: d - 0.203 - 0.008

2.15 2.65 0.085 0.104

2.18mm

1.75mm 2.16mm 1.75mm H1 2.13 2.47 0.084 0.097

Revision:TVS-1.0SMB SERIES-001(A3) 2 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Electrical Characteristics (TA=25℃)

Maximum
Device Reverse Breakdown Peak Reverse
Test Clamping
Part Number Marking Stand-Off Voltage Pulse Leakage
Current Voltage
Code Voltage @IT Current @VRWM
@IPP

Unidirectional Bidirectional UNI BI VRWM(V) VBR(V) IT(mA) VC(V) IPP(A) IR(μA)

1.0SMB6.8A 1.0SMB6.8CA 6K8A 6K8C 5.80 6.45~7.14 10 10.5 96.8 1000

1.0SMB7.5A 1.0SMB7.5CA 7K5A 7K5C 6.40 7.13~7.88 10 11.3 90.0 500

1.0SMB8.2A 1.0SMB8.2CA 8K2A 8K2C 7.02 7.79~8.61 10 12.1 84.0 200

1.0SMB9.1A 1.0SMB9.1CA 9K1A 9K1C 7.78 8.65~9.55 1 13.4 75.8 50

1.0SMB10A 1.0SMB10CA K10A K10C 8.55 9.50~10.50 1 14.5 70.2 10

1.0SMB11A 1.0SMB11CA K11A K11C 9.40 10.50~11.60 1 15.6 65.2 5

1.0SMB12A 1.0SMB12CA K12A K12C 10.20 11.40~12.60 1 16.7 60.8 5

1.0SMB13A 1.0SMB13CA K13A K13C 11.10 12.40~13.70 1 18.2 55.8 1

1.0SMB15A 1.0SMB15CA K15A K15C 12.80 14.30~15.80 1 21.2 48.0 1

1.0SMB16A 1.0SMB16CA K16A K16C 13.60 15.20~16.80 1 22.5 45.2 1

1.0SMB18A 1.0SMB18CA K18A K18C 15.30 17.10~18.90 1 25.5 40.3 1

1.0SMB20A 1.0SMB20CA K20A K20C 17.10 19.00~21.00 1 27.7 36.7 1

1.0SMB22A 1.0SMB22CA K22A K22C 18.80 20.90~23.10 1 30.6 33.2 1

1.0SMB24A 1.0SMB24CA K24A K24C 20.50 22.80~25.20 1 33.2 30.7 1

1.0SMB27A 1.0SMB27CA K27A K27C 23.10 25.70~28.40 1 37.5 27.2 1

1.0SMB30A 1.0SMB30CA K30A K30C 25.60 28.50~31.50 1 41.4 24.5 1

1.0SMB33A 1.0SMB33CA K33A K33C 28.20 31.40~34.70 1 45.7 22.2 1

1.0SMB36A 1.0SMB36CA K36A K36C 30.80 34.20~37.80 1 49.9 20.3 1

1.0SMB39A 1.0SMB39CA K39A K39C 33.30 37.10~41.00 1 53.9 18.8 1

1.0SMB43A 1.0SMB43CA K43A K43C 36.80 40.90~45.20 1 59.3 17.2 1

1.0SMB47A 1.0SMB47CA K47A K47C 40.20 44.70~49.40 1 64.8 15.7 1

1.0SMB51A 1.0SMB51CA K51A K51C 43.60 48.50~53.60 1 70.1 14.5 1

1.0SMB56A 1.0SMB56CA K56A K56C 47.80 53.20~58.80 1 77.0 13.2 1

1.0SMB62A 1.0SMB62CA K62A K62C 53.00 58.90~65.10 1 85.0 12.0 1

1.0SMB68A 1.0SMB68CA K68A K68C 58.10 64.60~71.40 1 92.0 11.0 1

Revision:TVS-1.0SMB SERIES-001(A3) 3 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Ratings and Characteristic Curves (TA=25℃ unless otherwise noted)

Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve

100 100

Peak Pulse Power (PPP) or Current (IPP)

PPPM - Peak Pulse Power (kW)

80

Derating in Percentage %
10
60

40
1

20
0.2×0.2″(5.0×5.0mm)
Copper Pad Area

0.1 0
1 10 100 1000 0 25 50 75 100 125 150 175
td-Pulse Width (µs) TA-Ambient Temperature (℃)

Figure 3. Pulse Waveform Figure 4. Typical Junction Capacitance

150 10000
tr=10µs TJ=25℃
Pulse Width(td) is defined as Bi-directional V=0V
IPPM - Peak Pulse Current, %IRSM

the point where the peak

current decays to 50% of IPPM
Uni-directional V=0V
1000
Peak Value IPPM Uni-directional @VR
100
Cj (pF)

100
Half Value IPPM (IPPM/2)
50 Bi-directional @VR
10/1000µs Waveform 10
as defined by R.E.A
TJ=25℃
f=1.0MHz
td Vsig=50mVp-p
0 1
0 1.0 2.0 3.0 4.0 1 10 100 1000
t-Time (ms) VBR-Reverse Breakdown Voltage (V)

Figure 5. Steady State Power Dissipation Figure 6. Maximum Non-Repetitive Forward

Derating Surge Current Uni-Directional Only
Curve
6 120
IFSM - Peak Forward Surve Current (A)
PM(AV), Steady State Power Dissipation (W)

5 100

4 80

3 60

2 40

1 20

0 0
0 25 50 75 100 125 150 175 1 10 100
TA-Ambient Temperature (℃) Number of Cycles at 60Hz

Revision:TVS-1.0SMB SERIES-001(A3) 4 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Recommended Soldering Conditions

Reflow Soldering

tP Critical Zone
TP TL to TP
Ramp-up

TL
TS max tL
Temperature

TS min
Ramp-down
tS
Preheat

25
t 25℃ to Peak
Time

Recommended Conditions

Profile Feature Pb-Free Assembly

Average ramp-up rate (TL to TP) 3°C /second max.
Preheat
-Temperature Min (TS min) 150°C
-Temperature Max (TS max) 200°C
-Time (min to max) (tS) 60-180 seconds
TS max to TL
-Ramp-up Rate 3°C /second max.
Time maintained above:
-Temperature (TL) 217°C
-Time (tL) 60-150 seconds
Peak Temperature (TP) 260°C
Time within 5°C of actual Peak Temperature (tP) 20-40 seconds
Ramp-down Rate 6℃/second max.
Time 25℃ to Peak Temperature 8 minutes max.

Revision:TVS-1.0SMB SERIES-001(A3) 5 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Marking Code

Cathode Band

YXXX YXXX
6K8A 6K8C

Logo Internal Control Code Logo Internal Control Code

Marking Code Marking Code

Part Number Code

1.0SMB XXX C A / XXXX

Package Code
TR7:7 inch reel package
TR13:13 inch reel package
5% VBR Voltage Tolerance
Bidirectional
VBR Voltage
Series Code

Ordering Code for Different Package

7 inch reel package: Add suffix “/TR7 ” at the end of the part number, such as 1.0SMBXXXCA/TR7
13 inch reel package: Add suffix “/TR13 ” at the end of the part number,such as 1.0SMBXXXCA/TR13

Revision:TVS-1.0SMB SERIES-001(A3) 6 / 7 http://brightking.yageo.com

 1.0SMB SERIES

Packaging

Tape Symbol Dimension (mm)

W 12.00±0.20
P0 4.00±0.10
P0 P1 P2 D0 P1 8.00±0.10
B E T

P2 2.00±0.10
F
W D0 Φ1.55±0.10
B0
D1 Φ1.5±0.10
D1
A A B K0 E 1.75±0.10
SECTION B-B
F 5.50±0.10

A0 A0 3.86±0.15
SECTION A-A B0 5.65±0.10
K0 2.75±0.15
T 0.25±0.05
7” Reel D2 Φ178.0±2.0

D3 Φ50.0Min.
D4
D3 D4 Φ13.0±0.5

W1 16.0±2.0
D2 W1
Quantity: 500PCS

13” Reel D5 Φ330.0±2.0

D6 Φ13.5±0.5

H 2.5±1.0

W2 16.0±2.0

Quantity: 3000PCS

Revision:TVS-1.0SMB SERIES-001(A3) 7 / 7 http://brightking.yageo.com