Inbound 6995870271152675852

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Bottle cover

Designed by Anchor Studio


AnchorCrafts.com Design No.: 0060003-00709-10
2
@anchorcrafting MEZ GmbH, 2018. All Rights Reserved.
0060003-00709-10 Bottle cover

Anchor Stranded Cotton 8m 4635000- # (Colour nº) Embroidery

1 x #1, #47, #230, #239, #358, #361


1 x Anchor Coton à Broder 25 #1 Easy 2
1 x reel Anchor Metallic #300

1 x tapestry Finished size: 17 x 35 cm


N° 24 Embroidery: 6.5 x 12.5 cm

Bottle cover TIP


Always work cross stitch with a Tapestry needle! Always work the cross
YARN USAGE stitch first and only then work the backstitch or straight stitch. Each square
Anchor Stranded Cotton, worked with 3 strands. on the chart represents one cross stitch.

STITCH TECHNIQUE WASHING INSTRUCTIONS


Cross stitch and backstitch worked over 2 fabric threads each way. All our threads are produced in accordance with Oeko-tex standards. PH val-
ues are tested and all our colors dye lots adhere to Global fastness standards.
FABRIC However, it is important to follow our thread washing instructions. Particularly
About 20 x 25 cm 25# evenweave fabric in white. with dark colors, excess dye can remain on the thread. To minimize any po-
tential bleeding of excess dyestuff it is important to wash the products in THE
NOTIONS HOTTEST TEMPERATURE possible, in accordance with the specifications of
46 x 35 cm white felt (2 rectangles each 17 x 35 cm and a circle about 11 cm the fabrics, and use a large amount of water. Please make sure that you also
in diameter), matching sewing thread, 20 x 20 cm iron-on bonding material, follow the fabric washing instructions. As a precaution, you can also use
1 m red 25 mm ribbon. decolorating sheets that you can find in any supermarket.

ALL YOU NEED TO DO


Neaten the raw edges of the fabric with zigzag stitch. Embroider the motif
centrally onto the fabric. Work a simple hem-stitch border about 2.5 cm
away from the embroidery and then fringe the fabric edges for 1 cm. Place
the embroidery as you wish onto one of the two felt rectangles and secure
with a few stitches or apply to the felt using iron-on bonding material.
When the motif has been applied, place the two felt rectangles together
and stitch the long sides together about 1 cm away from the edge. Finally,
with seams towards the outside, insert the circle to form a base.

CROSS STITCH
Cross stitch is worked in two stages – first work the lower stitch (from left to
right) and then work the upper stitch (from right to left).

BACKSTITCH
Backstitch is worked from right to left.

Please review our full terms of use of this pattern on our website
Stranded © Copyright MEZ GmbH, 2018.

Cotton MEZ GmbH · Hauptstraße 78 · D-79336 Herbolzheim, Germany · AnchorCrafts.com 2/3


2
0060003-00709-10 Bottle cover

1 361 358 47 239 230 gold

Please review our full terms of use of this pattern on our website
Stranded © Copyright MEZ GmbH, 2018.

Cotton MEZ GmbH · Hauptstraße 78 · D-79336 Herbolzheim, Germany · AnchorCrafts.com 3/3

You might also like