Benchmark of quality

Ref. No.: CML/54/2024-25/NSE Date: 09th October, 2024

To,
The Manager - Listing Compliance
National Stock Exchange of India Limited
Exchange Plaza, Plot No. C-1, Block-G,
Bandra Kurla Complex, Bandra (E),
Mumbai - 400051

Company Symbol: CMNL

Dear Sir/Madam,

Subject: Investor Presentation.

Re: Intimation under Regulation 30 of the Securities and Exchange Board of India (Listing
Obligations and Disclosure Requirements) Regulations, 2015 (“SEBI Listing
Regulations 2015”).

Pursuant to Regulation 30 of the SEBI (Listing Obligations and Disclosure Requirements) Regulations,
2015, we are enclosing herewith the Investor Presentation on the overview of the financial position and
business operations of the Company and details of GR Group of Industries for investors and public at
large.

The abovementioned presentation is also available on the website of the company at

www.cmlgrgroup.com.

We request to take the above information on your records and disseminate the same on your
respective website.

Thanking You,
Yours faithfully,
For CHAMAN METALLICS LIMITED
CHETAN Digitally signed by
CHETAN KUMAR
KUMAR AGRAWAL
Date: 2024.10.09
AGRAWAL
_______________________
17:54:15 +05'30'

Chetan Kumar Agrawal

Managing Director
DIN: 00748916

CIN : L27100MH2003PLC143049
Regd. Office & Works : A-26, M.I.D.C., Tadali Growth Centre, Tadali, Chandrapur - 442406 (Maharashtra)
Ph.: 0717-2350061 - 70
Correspondence : Agrawal Complex, Opp. Pandey Nursing Home, Samta Colony, Raipur - 492001 (Chhattisgarh)
Ph.: 0771-4259100
E-mail: [email protected], [email protected] Website: www.cmlgrgroup.com
 COMPANY
• More than 2 decades of experience in the Steel Industry.
• Revenue from Operations ₹188.87 Crore, EBITDA of ₹20.47
Crore, PAT of ₹12.52 Crore in FY 2024.
• Under the management of GR Group of Industries, Raipur
(C.G.) which operates in various segment of steel i.e., Sponge
Iron, Ferro alloys, MS Ingots & re-rolled products.
• ISO Certifications
• ISO 9001:2015 for Quality Management Systems
• ISO 14001:2015 for Environmental Management Systems
• ISO 45001:2018 for Occupational Health and Safety Management Systems

www.cmlgrgroup.com
02
 About the
Company
• Incorporated as “Chaman Metallics Private Limited”
on November 10, 2003
• Company was under the control of MSP Group from
2006 to 2019.
• In 2019, the Company was acquired by us - GR
Group of Industries Operating in steel business since
1994.
• Company currently manufactures Direct Reduced
Iron (i.e. sponge iron) which constitutes high metallic
iron content. The by products are Dolochar, Iron Ore
Fines & Dust.
• Manufacturing unit is based at Chandrapur,
Maharashtra, spread across 63 acres of land.
• Aggregate Annual Installed Capacity of 72,000 MT (2
X 100 MTPD) for production of Sponge Iron.

www.cmlgrgroup.com
03
 GR Group of Industries is a conglomerate of Companies that operate in various sectors of
steel business viz. Sponge Iron (DRI), MS Ingots, High Carbon Rounds, Cast Iron, Structural Items, Power,
Ferro alloys. Our group is well established and is currently in the mode of expanding operations.
• In 1994, established Rolling mill along with Induction Furnace known as M/s Ramesh
Steel Industries by the group’s visionary founder late Shri Ganpatrai Agarwal.
• In 2002, established our flagship G.R. Sponge and Power Limited.
• In 2006, acquired G.R. Minerals and Industries Private Limited.
• In 2014, acquired N.R. Sponge Private Limited.
• In 2019, acquired Chaman Metallics Limited.
• In 2021, G.R. Sponge And Power Limited commenced the production of Cast Iron,
Railway/SGCI Inserts and MS Ingots.
• In 2021, acquired G.R. Krishna Ferro Alloys Private Limited.
• In 2023, merged G.R. Minerals, GR Ecotech and G.R. Mines and Minerals into G.R.
Sponge and Power Limited
• In 2023, launched IPO of Chaman Metallics Limited, which was met with an
overwhelming response, being subscribed a staggering 197 times.
• In 2024, established G.R. Integrated Steel Private Limited.
www.cmlgrgroup.com
04
 G.R.
G.R. G.R.
G.R. Sponge G.R.
Ramesh Sponge N.R. Krishna
Sponge and Integrated Chaman
Steel and Sponge Ferro
and Power Steel Metallics
Industri Power Private Alloys
Power Limited Private Limited
es Limited Limited Private
Limited – Unit Limited
– Unit II Limited
III
Re-Rolled
Products Sponge Pig Iron / Sponge Silico
Iron Cast Iron/ Silico Iron Manganese
(Round/ Railway/ Manganes Iron Ore Sponge
MS Flat/ 60,000 90,000 33,000
SGCI e/ Cast MTPA Pellet Iron
Octagonal MTPA Insert/ Iron MTPA
Bar/ Metal 9,00,000 72,000
Ingot 12,000 MTPA MTPA
Liner) Power
Power 30,000 MTPA Power
28,000 MTPA 8 MW/Hr.
MTPA 8 MW/Hr. 18 MW/Hr.

www.cmlgrgroup.com
05
 History &
2003 2005 2007
Incorporation of our Company as Commencement of Change in Registered office of the
“Chaman Metallics Private Limited” Commercial Production at Company from Nagpur, Maharashtra
under the Companies Act, 1956. Chandrapur Factory Unit to Chandrapur, Maharashtra.

2008 2019 2020-21

Conversion of Acquisition of
Crossed Revenue of ₹100 Cr.
Company from “Chaman Metallics 2021-22
Private Limited to Limited” by GR Crossed Revenue of ₹175 Cr.
Limited Company Group of
2022-23
i.e. “Chaman
Metallics Private
Industries pursuant
to share Purchase
Crossed Revenue of ₹200 Cr.
Limited” to Chaman Agreement dated 2019-20 2024
Metallics Limited March 14, 2019 Crossed Revenue of ₹50 Cr. Completed 20 Years since Incorporation

www.cmlgrgroup.com
06
Production
Process
www.cmlgrgroup.com
07
 Strategically Transforming into Stringent Long standing Well Qualified and
located Integrated Steel Plant quality control relationship Experienced
• Backward Integration: mechanism with our Management Team
manufacturing Installing a waste heat • Extensive and customers • Experienced and qualified
unit recovery boiler to reduce management team led by
stringent quality • Products supplied
• Raw materials power costs and Co2 our Leaders- Mr. Ramesh
control mechanism to steel
i.e. coal, iron ore and emissions by utilizing waste Kumar Agrawal, Mr.
at each stage of the manufacturers in
dolomite are abundant heat gases from the manufacturing Maharashtra, Chetan Kumar Agrawal
in the mines like those steelmaking process. and Mr. Keshav Kumar
• In-house testing Chhattisgarh and
of WCL, located in Agrawal
Madhya Pradesh
close proximity of • Forward Integration: laboratory
Chandrapur itself Establishing a billet plant that equipped with • High success rate • Adequate technical and
utilizes in-house produced of Customer commercial team having
precision
sponge iron, enhancing retention relevant industry
equipments
production efficiency and experience
sustainability.

www.cmlgrgroup.com
08
 Industry
• India is currently the 2nd • Steel demand is projected
largest producer of to increase 1.7% in 2024
crude steel in the World reaching to 1,793.1
• India is the largest Million Tons which
producer of Sponge Iron represents an increase of
& 2nd largest finished approximately 30.1
steel consumer in the Million Tons.
world • India is expected to
account for nearly 1/3 rd of
• Global sponge iron
production rose by 8.1% this growth, with its steel
to 136.5 Mil. Ton, up consumption forecasted to
from 126.2 Mil. Ton in increase by 8.2% to 144.3
2022. Mil. Ton.

• India accounted for • FDI 100% through the

nearly 70% of the global automatic route allowed
increase in production. for Steel Sector.

www.cmlgrgroup.com
09
 Government Initiatives
• In Union Budget 2024-25, • In October 2021, PLI Scheme
the government allocated ₹ was announced for specialty
324 Crore to the Ministry of steel.
Steel.
• FDI 100% through the automatic
• The Union Budget 2024-25 route allowed for Steel Sector.
allocated ₹11,11,111 Crore
• In May, 2017, Domestically
for infrastructure, 3.4% of
Manufactured Iron and Steel
GDP. This investment is set
Products (DMI&SP) Policy was
to significantly benefit the
launched which mandates a
steel industry through
preference for domestically
increased demand and
manufactured iron and steel
growth.
products in government
• The National Steel Policy procurement, now requiring
2017 envisaged 300 Mil. 20%-50% value addition (up
Tons. of production from the previous 15%-50%).
capacity by 2030-31 from
140 Million Tons in 2023.

www.cmlgrgroup.com
10
 Expansion Proposed Total Capacity
Continue to invest in manufacturing
Plan Capacity Post Expansion
capabilities
Sponge Iron (Existing 72,000 TPA) 1,15,500 TPA 1,87,500 TPA
• Focus on capacity expansions,
M.S. Billets (Steel Melting Unit with LRF) 1,98,000 TPA 1,98,000 TPA
modernization of equipment & facilities.
• Environment Clearance, Consent to Ferro Alloys / Cast Iron (Submerged Arc Furnace) 39,200 TPA 39,200 TPA
establish & Building Plan is approved for Captive Power Plant - *12 MW WHRB 30 MW* 30 MW*
the Expansion
18 MW AFBC

Existing Facilities: A Foundation for Growth

• Utilization of 35 acres of land at our Continue to strengthen relationship with Expected date of
existing facility to expand our operations Customers
Commencement of
• Utilization of existing infrastructure • Provide products that maximize returns
Operations -
(existing water and electricity facilities) • Strive to increase share of business amongst

• Seamless Integration into New Facilities

existing customers & increase the customer base. April, 2025
www.cmlgrgroup.com
11
 Ramesh Kumar Agrawal,
aged 63 years,
Director, Chaman Metallics Limited
Chairman, GR Group of Industries
Bachelor’s of Commerce
42 Years of Experience in Steel Industry
& Business

Chetan K. Agrawal, Keshav K. Agrawal,

aged 37 years, aged 33 years,

Chairman & Joint Managing

Managing Director Director & CFO

Bachelor’s degree in Chartered Accountant,

Industrial Engineering Bachelor of Commerce
from University of Pune
More than 13 Years
More than 16 Years Experience in Business
Experience in Business

www.cmlgrgroup.com
12
 OVERVIEW
227.62 27.47 17.10 89.64 1.44
184.87 188.87 76.87
20.48 12.52
15.50 9.35
38.08 0.66

0.28

FY 22 FY 23 FY 24 FY 22 FY 23 FY 24 FY 22 FY 23 FY 24 FY 22 FY 23 FY 24 FY 22 FY 23 FY 24
Revenue EBITDA PAT Net Worth Debt-Equity Ratio
(Figures in ₹ in Cr.) (Figures in ₹ in Cr.) (Figures in ₹ in Cr.) (Figures in ₹ in Cr.)

www.cmlgrgroup.com
13
 CHAMAN METALLICS LIMITED
Regd. Office & Works:
A-26, M.I.D.C. Tadali Growth Centre, Tadali,
Chandrapur - 442406 (Maharashtra)
Contact No.: 07172 - 350073
Corporate Office:
“G.R. House”, Agrawal Complex, Samta Colony,
Raipur - 492001 (C.G.)
Contact No.: 0771 - 4259100
e-Mail: [email protected],
[email protected]
Website: www.cmlgrgroup.com

D I S C LA I M E R _______________
This presentation contains statements that could be “forward looking statements” including, but without limitation, statements relating to the implementation of strategic initiatives, and other statements relating Chaman
Metallics Limited future business developments and economic performance. While these forward looking statements indicate our assessment and future expectations concerning the development of our business, a number of
risks, uncertainties and other unknown factors could cause actual developments and results to differ materially from our expectations. These factors include, but are not limited to, general market, macro-economic,
governmental and regulatory trends, movements in currency exchange and interest rates, competitive pressures, technological developments, changes in the financial conditions of third parties dealing with us, legislative
developments, and other key factors that could affect our business and financial performance. We undertakes no obligation to publicly revise any forward looking statements to reflect future / likely events or circumstances.
This presentation cannot be copied and disseminated in any manner. No person is authorized to give any information or to make any representation not contained in and not consistent with this presentation and, if given or
made, such information or representation must not be relied upon as having been authorized by or on behalf of Chaman Metallics Limited