Plexibond TDS 1019

BOYSEN® Plexibond™B-7760
Cementitious Waterproofing System
DESCRIPTION TECHNICAL DATA

BOYSEN® Plexibond™ is a specially formulated Vehicle Type:
acrylic polymer designed for compounding Acrylic
with Portland cement. The resulting mixture
possesses excellent adhesion, water resistance, Finish:
and flexibility even on thin section applications. Cementitious
Its use eliminates water seepage. This makes it VOC (±2.0 g/L):
ideal for positive side waterproofing roof decks 17.8 g/L
and firewalls.
Dry Time:
Touch: 2 hours
FEATURES Recoat: 2 hours in between coats
(Allow to dry for at least 1 day before painting)
Outstanding Flexibility *Measured at 25°C and 50% relative humidity
Plexibond-modified cement possesses superior
Density (±0.05 kg/L):
flexibility, eliminating cement-plastering
1.01 kg/L
defects. It maintains the integrity of the mortar
with its excellent adhesive and tensile strength. Theoretical Coverage per 4-Liters at 11 mils DFT:
5-6 sq. m.
Excellent Water Resistance
*Depending on surface texture and porosity
It forms a seamless, non-porous, impenetrable
layer that disperses any liquid upon contact, Tinting:
preventing any water seepage when applied on Not applicable
both vertical and horizontal surfaces.
Thinning Solvent:
Resistant to Weathering Not applicable
It has excellent sunlight exposure resistance,
Clean-up Solvent:
prolonging the service life of light building Water
materials such as marine plywood and fiber
cement boards. Packaging:
4-Liters and 16-Liters
Beautifies
It can also be brushed on as a plaster finish or Application:
applied by using a textured roller or a mortar By brush or textured roller
gun, resulting in an attractive “orange peel”
texture cementitious coating. SURFACE PREPARATION
BOYSEN Plexibond should be applied on bare concrete,
wood, or metal that has not been previously painted.
Existing paint should be totally scraped off. New masonry
PRINCIPAL USES should be allowed to cure for at least 14-28 days. The
Excellent adhesion on concrete substrates. surface should be clean, free from oil, grease, dust, dirt, and
any loose grit or mortar. Dampen concrete surfaces first
with water before applying Plexibond mix to avoid abrupt
drying and cracking of the applied modified cement,
especially under hot and sunny conditions.
MATERIAL PREPARATION 102219
Slowly mix 6.5-7.5 kilograms of cement to 4-Liters of BOYSEN Plexibond while constantly stirring to prevent
lumping. Pass the mixture through a fine strainer to sift out lumpy materials. Ensure intimate mixing, stirring
as often as possible to avoid settling. Keep mixture proportion constant for a uniform texture. Mix only
enough material to prevent waste. Workability of Plexibond mixture is 30 minutes, while the potlife is 2 hours.
APPLICATION SCHEDULE
For vertical surfaces such as firewalls, apply one coat of Plexibond mixture using a textured roller (for orange
peel texture finish) or two coats by brush (for plain finish) while maintaining coverage rate at 5-6 square
meters. Recoating interval is 1-2 hours.
For filling large cracks, add 3 parts by volume of fine, uniform-sized sand to 1-part cement and mix with
Plexibond to a trowellable consistency.
Suggested topcoats are BOYSEN Permacoat Latex, BOYSEN Acrytex, Boysen Acqua Epoxy, or BOYSEN Epoxy
Enamel. Allow Plexibond to dry for at least one day before paint application.
For horizontal surfaces such as roof decks, parapets, canopies, and ledges, slowly mix 6.5 kg cement to 4-Liters
Plexibond and apply 3-5 coats by brush or 2-3 coats by textured roller.
Reinforce joints, corners and active cracks susceptible to cracking or movement with a strip of fiberglass
matting. Put on the matting immediately after the second coat while the mixture is still wet. The matting
should adhere to the mixture. Make sure the Plexibond coating and the matting are completely dry before
applying succeeding coats. The matting should be completely covered by the mixture. Let dry for one day, and
then apply a bond coat by brushing BOYSEN Plexibond straight from the can prior to laying out mortar
topping.
SHIPPING
UN Number: Not Applicable Freight Classification: Non-DG Flash Point: Not Applicable
PRECAUTIONS
Health & Safety: Ensure good ventilation during application and drying. Avoid breathing vapor and spray mist. Avoid contact with
skin and eyes. Wear eye protection and gloves during application or sanding. Wash hands thoroughly after.
This product is not recommended for toys and other children’s products. Do not take internally. Keep out of reach of children.
In case of spillage, keep spectators away. Dike and contain spills with inert material (e.g. sand or earth). Keep spills and cleaning
runoffs out of sewers and open bodies of water. Dispose contaminated material according to government regulations.
First aid: If overcome by vapor and spray mist, bring victim to fresh air. If discomfort persists or any breathing difficulty occurs, get
medical help. In case of eye contact, rinse immediately with plenty of water for at least 15 minutes and obtain medical help at once. In
case of skin contact, wash thoroughly with soap and water. Remove contaminated clothing. Wash clothes before reuse. If swallowed,
do not induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration of liquid into the lungs. Get
medical help at once.
LIMITATIONS ON LIABILITY
To the best of our knowledge the technical data contained herein are true and accurate at the date of issuance but are subject to
change without prior notice. We guarantee our product to conform to Pacific Paint (BOYSEN) Philippines, Inc.’s specifications. We
make no other warranty or guarantee of any kind, express or implied, including merchant ability and fitness for particular purpose.
Labor or cost of labor and other consequential damages are hereby excluded.

Plexibond TDS 1019

Uploaded by

Copyright:

Available Formats

Plexibond TDS 1019

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Plexibond TDS 1019

Uploaded by

Copyright:

Available Formats

BOYSEN® Plexibond™B-7760

Cementitious Waterproofing System

DESCRIPTION TECHNICAL DATA

You might also like