8.5.

24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

TERMINAL CONNECTOR (19MM) multiple

1 1009 & 1009-1 29000003 Set
hole (bolted type) (1009, 1009-1) with Fastners
TERMINAL CONNECTOR (15MM) multiple
2 1010-3 29000004 Set
hole (1010-3) with Fastners
3 1031-2 29000005 CONTACT WIRE PG CLAMP (LARGE) Set
4 1030-3 29001266 Parallel clamp Large ( 157-65/107/150) Set
5 1041-2 29000006 CONTACT WIRE PG CLAMP (SMALL) Set
6 1040-3 29000382 Contact wire Parallel clamp small(90 -50) Set
7 1051-3 29000007 CONTACT WIRE PG CLAMP (150/160) Set
8 1080-1 29000008 CONTACT WIRE SPLICE(TOOTHED TYPE ASS Set
CATENARY SPLICE (65)( 1091, 1092, 1093,
9 1090 29000009 Each
1094)
CONTACT WIRE ENDING CONE (1118, 1119)
10 1110-2 29000010 Set
with 1119 10% extra.
29000011 CATENARY ENDING CLAMP (1121, 1092,
11 1120 Set
1094)
12 1130 29000012 FEEDER ENDING CLAMP (1102, 1104, 1131) Set
LARGE SPAN WIRE ENDING CLAMP 130
13 1140 29000013 Set
SQMM (1102, 1131, 1143)
14 1161 29000014 SUSPENSION CLAMP Set
15 1163 29000015 SUSPENSION CLAMP LOCK PLATE (CU) Nos.
16 1170 29000016 DOUBLE SUSPENSION CLAMP (1171, 72) Nos.
17 1174 29000017 PACKING SADDLE (1174) Nos.
18 1181 29000018 CONTACT WIRE DROPPER CLIP Nos. 2042 pend to rcd Mosdofer
19 1182 29000019 CU LOCKING WIRE Nos.
20 1192 29000020 CATENARY WIRE DROPPER CLIP Nos. 13500 pend to rcd Mosdofer
21 1221 29000021 CONTACT WIRE SWIVEL CLIP PART (AB) Set
22 1222 29000022 CONTACT WIRE SWIVEL CLIP PIN (CU) Nos.
23 1272 29000333 suspension clamp clevis Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

24 1320 `U' CLAMP CLAMP BODY (CU) Nos.

25 1350 29000024 THIMBLE ASSY 10 MM Nos.
STEELWIRE ENDING CLAMP (1131, 1361,
26 1360
1362) Nos.
27 1371-1 29000026 RAISED REGISTER ARM CLAMP Nos.
28 1540 29001898 BIMETALLIC PARALLEL CLAMP (10/20) with F Nos.
29 1550 29000951 PARALLEL CLAMP (10/20) with Fastners Nos.
30 1560 29000027 BIMETALLIC PARALLEL CLAMP (15/20) with F Nos.
31 1050-3 29000007 PARALLEL GROOVE CLAMP (20/20) Nos.
LARGE SUSPENSION CLAMP (20MM) (1581,
32 1580 29000028 Set
1582) with Fastners
33 1580 -11 29001911 ARMOUR Tape (1.0M LONG) & Ferrule (1580 Re Set to be chk
34 1600 29000030 20 MM STRAIN CLAMP ('1601,1602) with Faste Set
35 2041 29000031 Std Bracket Tube (30/38 mm)-6.0 mtr.length. mtr
36 2064-1 TUBE CAP (30MM) Nos.
37 2081 29000032 LARGE BRACKET TUBE-6.3 mtr. Length Nos.
38 2104-1 29000033 TUBE CAP 40 MM Nos.
39 2110 STANDERD SUSPENSION CATENARY BKT (21 Nos.
40 2130 29001267 LARGE SUSPENSION CATENARY BKT (2131&2 Nos.
2161-2 & 29000035
41 LARGE REGISTER ARM HOOK (2161-2 &2162- Nos.
2162-2
42 2274-1 Dropper Clip (38) (FOR Std Bkt) Nos.
43 2277 29000036 DROPPER CLIP(49)FOR LARGE Nos.
44 2341 Solid Steady Rod Piece Nos.
45 2345 Steady Rod Slleve Nos.
46 2352 29000746 Bent Steady Arm Swivel Nos.
25 MM DROP BRACKET PART (FORGED) /25
47 2361-1 29000393 Nos. no any pending order
MM DROP BRACKET PART (FORGED)-2361-2
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

48 2391-1 29000038 STEADY ARM HOOK (BFB) (FORGED) Nos.

49 2392 29000039 BFB STEADY ARM SWIVEL Nos.
50 2401 29000040 Stay & Register Arm Tube (25/33 mm)-6.3 mtr.le Mtr
51 2402 29000041 TUBULAR STAY ADJUSTER Nos.
52 2402-1 29000042 TUBULAR STAY ADJUSTER LARGE Nos.
53 2403-2 29000043 TUBULAR STAY SLEEVE (FORGED FITTING) Nos.
54 2422-2 29000044 REGISTER ARM EYE PIECE (FORGED) Nos.
55 2423-1 29000045 TUBE CAP 25 MM Nos.
56 2432 29000046 RAISED REGISTER ARM ADJUSTER Nos.
57 2461-1 29000047 REGISTERARM DROPPER CLIP 34 MM Nos.
58 2471-1 29000048 DROPPER CLIP 25 MM Nos.
59 2490-2 29000546 25mm Steady arm clamp Nos.
60 2520 29001500 Normal Bent steady arm Kgs
61 2522 29001372 Normal Bent steady arm eye piece Set
62 2544-6 29000049 BFB STEADY ARM (I) Section (0.89 mtr) Nos.
63 2544-5 29000050 BFB STEADY ARM (I) Section (0.69 mtr) Nos.
64 2544-7 29000051 BFB STEADY ARM (I) Section (1.09 mtr) Nos.
65 2550-1 29000052 STANDRAD ANTIWIND CLAMP (2551-1&2503) Nos.
MAST FITTING FOR HOOK INSULATOR
66 3021-1
29000053 (FORGED) along with fasteners Nos.
67 3070-1 29000054 MAST BRACKET FTG ASSLY (150) Nos.
68 3070-2 29000055 MAST BRACKET FTG ASSLY (200) Nos.
69 5002 29000056 GUY ROD STIRRUP Nos.
70 5005 29000057 GUY ROD 9.7MTR Nos.
71 GUY ROD 9.3MTR Nos.
72 5001-3 29000058 Anchor Bolt 20mm. Dia (0.85M) Nos.
73 5006-1 29000059 SHORT GUY ROD 5.35MTR Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

74 5007-1 29000060 ANCHOR `V' BOLT (GS) Nos.

75 5008 29000061 BC ANCHOR LOOP Nos. no any pending order
76 5020 29001268 9 TON ADJUSTER ASSLY (5020) Nos.
77 5020-1 29000062 9-Ton Adjuster (Eye & Clevis Type) (RI No-5020 Nos.
78 5020-2 29000063 9 TON ADJUSTER ASSLY Nos.
79 5031 29000064 ANCHOR DOUBLE STRAP Set
80 5041-1 29000065 SINGLE CLEVIS 18 MM (Forged) Nos.
81 5063-1 29000066 STANDARD GUIDE TUBE ASSLY Nos.
COUNTER WEIGHT ASSLY (5091-263 Nos.;
82 5090-5
29000482 5092-3945 Nos.; 5093-263 Nos.) (660kg/Set) Nos.
83 5098 29000068 COUNTER WEIGHT PLATE Nos.
84 5099 29000069 COUNTER WT EYE ROD (1.55m) Nos.
85 5183 29000070 DOUBLE EYE DISTANCE ROD (20MM DIA) Nos.
86 5191 29000071 COMPENSATING PLATE Nos.
87 5192 29000072 EQUALISING PLATE Nos.
88 5221 29000073 GUY ROD DOUBLE STRAP (100) Nos.
89 5222 29000074 GUY ROD DOUBLE STRAP (150/250) Nos.
90 5500 29000075 REGULATING EQUIPMENT 3-PULLEY TYPE (R Nos.
91 0 29000339 SS WIRE ROPE ( EACH 8.5 Mtr.) Nos.
92 6000 29000077 STAY ARM INSULATOR ASSLY-P Nos. 288nos pend to rcd Adinath
93 29000854 STAY ARM INSULATOR ASSLY-C Nos. Pending to rcd Adinath
94 6020 29000078 9 TON INSULATOR ASSLY-P Nos.
95 29000856 9 TON INSULATOR ASSLY-C Nos. Pending to rcd Adinath
96 6030 29000079 BRACKET INSULATOR ASSLY-P Nos. 1096nos pend to rcd Aditya birla
97 29000855 BRACKET INSULATOR ASSLY-C Nos. Pending to rcd Adinath
98 6090 29000080 25 KV POST /SUPPORT INSULATOR Nos. 667nos pend to rcd Aditya birla
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

99 6094 29000081 POST INSULATOR JUMPER CLAMP Nos.

100 6095 29000082 POST INSULATOR BUS BAR CLAMP Nos.
SECTION INSULATOR ASSLY WITHOUT
101 6100 29000083 Nos.
SECTION INSULATOR to be chk
102 29000388 PTFE SHORT NEUTRAL SECTION ASSEMBLY Nos.
103 6110 29000084 SECTIONING INSULATOR-P Nos.
104 SECTIONING INSULATOR-C Nos.
105 6260 29000085 OPERATING ROD INSULATOR Nos.
106 6171 29000086 PARALLEL CLAMP DOUBLE Nos.
107 6181-1 29000087 SECTION INSULATOR DOUBLE STRAP Nos.
108 6481, 6482 29000088 36 MM ALUMINIUM BUS TERMINAL with Faste Nos.
109 36/30.4mm ALU BUS BAR Nos.
110 6491, 6482 29000089 AL BUS SPLICE 36 MM with Fasteners Nos.
36MM AL BUS TEE CONNECTOR with
111 6501, 6482
29000090 Fasteners Nos.
36/20mm terminal connector (6531, 6482 &
112 6530
29000091 6592) with Fasteners Nos.
36/20 mm Aluminum flexible bus splice (6561,
113 6550
29000092 6482, 6552 & 6553) with Fasteners Nos.
114 6520 29000542 CONNECTOR 36/15 Nos.
Terminal connectors for Aluminum
115 6830-1 conductors (Bolted type) (6831 & 6592) with
29000093 Fasteners Nos.
18 mm bus terminal Multiple hole/bolt with
116 6310-1
29001371 fastners – (Shall include item No:6311-1) Nos.
117 6320 29000460 18 mm bus Splice Nos.
EARTH ELECTRODE (GS) (OHE) (3 m), Other
118 7021 29000094 Nos.
Fixed structures to be added
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

119 222 29001256 EARTH ELECTRODE (GS) (TSS) (4.0m) Nos.

Rigid bimetallic terminal connector suitable
for 50 dia Aluminum tubular busbar to
120 11090 29000550 Nos.
terminal pad of 25kV Isolator/CT (ID-11090)
with Fasteners
Details of expansion type terminal connector
to suit 50 dia Aluminum tubular busbar,
121 11060 29000551 Nos.
terminal pad of 25kV CT/Isolator (ID-11060)
with Fasteners.
25kV system rigid Bus splice connector to
122 11180 29000552 suit 50 O/D Aluminum tube on both ways Nos.
(ID-11180) with Fasteners.
25kV system TEE connector to suit 50 O/D
123 11150 29000553 Aluminum tubular Busbar (ID-11150) with Nos.
Fasteners.
Rigid through connector to suit 50 dia
Aluminum tubular Busbar & SPIDER AAC
124 11110 29000554 Nos.
conductor for 25kV P.T. Type-II (ID-11110) with
Fasteners.
25kV system expansion Bus coupler on SI to
125 11210 29000555 Nos.
suit 50 O/D Al.tube (ID-11210) with Fasteners.
25kV system Tee connector to suit 50, O/D
126 11140 29000556 Aluminium tubular Spider AAC conductor Nos.
(ID11140) with Fasteners.
25kV system Tee to suit ZEBRA (28.58 dia)
127 11040 29000557 ACSR conductor on both ways (ID11040) Nos.
with Fasteners.
Rigid terminal Connector suitable for 20 dia
Al. conductor to terminal pad of 132kV CB,
128 11120 29000558 Nos.
Isolator & 25kV PT Type I & II (ID-11120) with
Fasteners.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

Rigid connector on SI to suit 50 mm O/D Al.

129 11200 29000559 Nos.
Bus bar (ID11200) with Fasteners.
Sliding clamp for 50mm O/D Al. busbar
130 11190 29000560 Nos.
(ID-11190) with Fasteners.
Rigid connector on SI to suit ZEBRA (28.58
131 11050 29001518 dia) ACSR conductor (ID-11050) with Nos.
Fasteners.
25kV system TEE connector to suit 36 O/D Al.
132 11240 29000561 Busbar to 50mm O/D Al. Busbar (ID11240) Nos.
with Fasteners.
133 11030 29000566 TERMINAL CONNECTOR (FOR ZEBRA Nos.
CONDUCTOR)
1100 V grade PVC Insulated Unarmoured 7
134 7X2.5 CU 29000547 Core 2.5 Sq.mm CU Cable as per latest RDSO/ Mtr
CORE Specification
1100 V grade PVC Insulated Unarmoured 10
135 10X2.5 CU 29000601 Core 2.5 Sq.mm CU Cable as per latest RDSO/ Mtr
CORE Specification
1100 V grade PVC Insulated Unarmoured 4
136 4X4 CU Core 4 Sq.mm CU Cable as per latest RDSO/
29000602 CORE Specification. Mtr
1100 V grade PVC Insulated Unarmoured 2
137 2X4 CU Core 4 Sq.mm CU Cable as per latest RDSO/
29000603 CORE Specification. Mtr
1100 V grade PVC Insulated Unarmoured 2
138 2X2.5 CU Core 2.5 Sq.mm CU Cable as per latest RDSO/
29000548 CORE Specification. Mtr
1100 V grade PVC Insulated Unarmoured 2
139 2X4 AL Core 4 Sq.mm Al Cable as per latest RDSO/
29001501 CORE Specification. Mtr
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

CABLE AL LT PVC 2X25 SQMM ARM/(2 core

x 25 sq.mm--Underground Railway Power
140 Cable with Stranded Aluminium conductor,
armoured, PVC insulated as per
29000412 IRS-S:63/2007 & IS 1554(Part 1) Mtr
1100 V grade XLPE Insulated PVC Sheathed
& Steel armoured heavy duty 2 Core 70
141 2X70 AL
Sq.mm AL Cable as per latest RDSO/CORE
29000100 Specification. Mtr
1100 V grade XLPE Insulated PVC Sheathed
& Steel armoured heavy duty 2 Core 185
142
Sq.mm AL Cable as per latest RDSO/CORE
Specification. Mtr
1100 V grade PVC Insulated Unarmoured 1
143 Core 35 Sq.mm AL Cable as per latest RDSO/
CORE Specification.
144 25kV Equipments
Supply of shunt capacitor bank of 2400 kVAR
rating at 25 kV (5500kVAR @ 40KV) with all
145 Nos.
connectors, if required as per latest RDSO/
CORE specifications
Low loss series reactor suitable for 25KV
shunt capacitor bank of 2400 KVAR
146 29001035 Nos. will be disp--20.5.24
(5500kVAR @ 40KV) with all connectors as
per latest RDSO/CORE specifications
Supply of 25kV single pole Vacuum Circuit
Breaker (1600 Amp) with interlocking, with all
147 29000494 Nos.
connectors as per latest RDSO/CORE
specifications
25kV single pole Outdoor Type Vacuum
148 29000483 Interrupter (1600 Amp) with all connectors, as Nos. will be disp--20.5.24
per latest RDSO/CORE specifications
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

25kV Potential Transformers Type-I with all

149 29000490 connectors , as per latest RDSO/CORE Nos.
specifications
25kV Potential Transformers Type-II with all
150 29000491 connectors, as per latest RDSO/CORE Nos.
specifications
42kV Lightning Arrestors with all connectors,
151 29000492 Nos.
as per latest RDSO/CORE specifications
110V, 40AH Low Maintenance Lead Acid
Battery complete with stand, accessories and
152 29000524 Nos.
a tool board, as per latest RDSO/CORE
specifications
Battery chargers for 110V, 40AH Low
153 29000523 Maintance Lead Acid Batteries, as per latest Nos.
RDSO/CORE specifications
25kV/240V Auxiliary supply transformers
154 29001567 (5kVA capacity) Oil type with all connectors, Nos.
as per latest RDSO/CORE specifications
25kV/240V Auxiliary supply transformers
155 29000095 (10kVA capacity) Oil type with all connectors, Nos.
as per latest RDSO/CORE specifications
25kV/240V Auxiliary supply transformers
156 29000096 (25kVA), with all connectors, as per latest Nos.
RDSO/CORE specifications
25 kV D.O. fuse switch, as per latest RDSO/
157 29000097 Nos.
CORE specifications
25 KV single pole isolator ( 1250 A), as per
158 29000239 Nos.
latest RDSO/CORE specifications
25kV Double Pole Isolator(1250 A )Without
159 29000489 Earth Contact Assembly), as per latest RDSO/ Nos.
CORE specifications
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

25 KV single pole isolator ( 1600 A), as per

160 29000098 Nos. In transit will rcd--20.5.24
latest RDSO/CORE specifications
Earth Contact Assembly for 25 kV SP
161 29000387 Isolator, as per latest RDSO/CORE Nos.
specifications
25kV Double Pole Isolator(1600 A )Without
162 29000488 Earth Contact Assembly), as per latest RDSO/ Nos.
CORE specifications
Supply & erection of 25 KV current
163 29000493 transformers (1500-750/5A), as per latest Nos.
RDSO/CORE specifications
Supply & erection of 25 KV current
164 29001042 transformers (200-100/5A), as per latest Nos.
RDSO/CORE specifications
25KV neutral current transformers. (2/1A), as
165 29001037 Nos.
per latest RDSO/CORE specifications
166 Terminal Board Nos.
Terminal Board for SWS, as per latest RDSO/
167 29000571 Nos.
CORE specifications
15 A, 230 Volt AC Fuse Box 4 Way, as per
168 29000572 Nos.
latest RDSO/CORE specifications
15 A, 110 Volt DC Fuse Box 2 Way, as per
169 29000573 Nos.
latest RDSO/CORE specifications
Anti theft transformer 240 volt/2.2 KV 5 KVA,
170 29001129 with DO Fuse switch as per latest RDSO/ Nos.
CORE Specfification
post & support
25 kv Support Insulator (TYPE-1-4, TYPE-2-2, insulator is same
171 29000080 Nos.
TYPE-3-16, TYPE-4-2) already considered in
sr.no--98
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

Supply of 132 kV double pole SF-6 circuit

173 29001805 breaker with interlock, as per latest RDSO/ Nos.
CORE specifications
132 kV double pole isolator (1250 A) Without
174 29001029 Earth Contact Assly as per latest RDSO/CORE Nos. 2nos in transit--G nandy
specifications
29001087/ 132 KV, SUPPORT INSULATOR, as per latest
175 Nos.
29001103 RDSO/CORE specifications
11 KV Disc Insulators - 120KN, as per latest
176 29001222 Nos.
RDSO/CORE specifications
Extra for Supply of Earth Contact Assly for
132 kV Double Pole Isolator, as per latest
177 29001496 Nos.
RDSO/CORE specifications, as per latest
RDSO/CORE specifications
ETI / PSI /
132 kV Termination Kit With out
178 0226-1 Style Nos.
adjuster--style-01
-01
ETI / PSI /
132 kV Termination Kit With out
179 0226-1 Style 29001107 Nos.
adjuster--style-02
-02
ETI / PSI /
132 kV Termination Kit With out
180 0226-1 Style Nos.
adjuster--style-06
-06
EARTH WIRE TERMINATION
ETI / PSI / ARRANGEMENT STYLE - 01 as per latest
181 29001108 Nos.
0225 Style - 01 RDSO/CORE specifications, as per latest
RDSO/CORE specifications
EARTH WIRE TERMINATION ARRANGEMENT
ETI / PSI / STYLE - 02 as per latest RDSO/CORE
182 29001109 Nos.
0225 Style - 02 specifications, as per latest RDSO/CORE
specifications
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

EARTH WIRE TERMINATION ARRANGEMENT

ETI / PSI / STYLE - 03 as per latest RDSO/CORE
183 29001110 Nos.
0225 Style - 03 specifications, as per latest RDSO/CORE
specifications
EARTH WIRE TERMINATION ARRANGEMENT
ETI / PSI / STYLE - 05 as per latest RDSO/CORE
184 29001516 Nos.
0225 Style - 05 specifications, as per latest RDSO/CORE
specifications
EARTH WIRE TERMINATION ARRANGEMENT
ETI / PSI / STYLE -06, as per latest RDSO/CORE
185 29001933 Nos.
0225 Style -06 specifications, as per latest RDSO/CORE
specifications
132 kV CurrentTransformer assembly (For
186 29001510 metering-0.2), as per latest RDSO/CORE Nos.
specifications
132 kV Potential Transformer assembly (For
187 29001031 metering-0.2), as per latest RDSO/CORE Nos.
specifications
132 kV current transformer assembly (400 -
188 29001030 200/5A), as per latest RDSO/CORE Nos.
specifications
120KV lightning arrestors , as per latest
189 29001090 Nos.
RDSO/CORE specifications
Control & relay panel (board) with Numerical
Type Protective & Auxilary Relays for Shunt
190 Nos.
Capacitor bank, as per latest RDSO/CORE
specifications
191 CRP FOR 132 KV CAPACITOR Nos.
ACDB (240 Volt AC) for TSS, as per latest
192 29001038 Nos.
RDSO/CORE specifications
DCDB (110 Volt DC) for TSS, as per latest
193 29001039 Nos.
RDSO/CORE specifications
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

110V, 200 AH, Low maintenance Lead Acid

Batteries complete with stand, accessories
194 29001040 Nos.
and a tool board, as per latest RDSO/CORE
specifications
Battery Chargers for 110V, 200 AH Low
195 29001041 maintenance Lead Acid Batteries, as per Nos.
latest RDSO/CORE specifications
Suppy, erection, testing & commissioning of
132/27 KV, 21.6/30.24 MVA, ONAN/ONAF, 1nos will be disp
196 29001499 Nos.
single phase traction power transformers, as on--18.5.24
per latest RDSO/CORE specifications
197 SCADA RTU FOR TSS WIP
198 SCADA RTU FOR SP/SSP
199 Copper Conductors
Supply of Contact wire (HDGCC 107 Sq.mm)
as per RDSO Specification no. ETI/OHE/
200 0.9512 29000102 76(6/97) with A&C slip No.1 of (4/01), 3 of Mtr
(03/05) , 4 of (12/06), 5 of (7/09), 6 of (5/12) & 7
of (12/13) or latest
Supply of cadmium copper catenary wire (65
Sq.
201 0.5973 29000103 mm) 19/2.10 mm as per RDSO Specs no.ETI/ Mtr
OHE/50 (06/97) with A & C
Slip No. 1 to 5 or latest.
Supply of Large Span Wire (130 sqmm) as
202 1.1692 29000104 Mtr
per latest RDSO Specification.
Supply of Copper Cross feeder Wire (150
203 1.3335 29000105 Mtr
sqmm) as per latest RDSO Specification
Supply of LargeJumper (105) wire as per
204 0.982 29000106 Mtr
latest RDSO Specification
Supply of Large Jumper (160) wire as per
205 1.504 29000107 Mtr
Latest RDSO Specification
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

Supply of Small Jumper (50) wire as per

206 0.4352 29000108 Mtr
latest RDSO Specification
Supply of Small Jumper (65) wire as per
207 Mtr
latest RDSO Specification
Supply of Dropper Wire Dropper Wire (5mm)
208 0.1746 29000109 Mtr
as per Latest RDSO Specification
Supply of Dropper Wire Dropper Wire (7mm)
209 29002132 Mtr
as per Latest RDSO Specification
Supply of 'Zebra' ACSR conductor (61/3.18
211 29001105 Mtr
mm (ZEBRA ACSR))
212 29000110 Aluminum 25 KV feeder (spider) Mtr
Galvanized steel wire(19/2.50mm)/Earth
213 29000111 Mtr
Screen Wire 19/2.5mm
214 29000464 Solid copper bus bar 18mm dia Mtr
215 29000587 Supply of Aluminium Bus Bar 50mmx39mm Mtr
216 29000113 Supply of Aluminium Bus Bar 36mmx28mm Mtr
217 25x3mm copper strip
218 29000115 Integral Lock for Isolators Nos.
219 17000237 Barbed Wire KG
220 29000117 Bi-Metallic Strip 80x80x2mm (from Katni 80X80 Nos.
221 29001831 Bimettalic strip (90x35x1mm) Nos.
222 29001899 Bimettalic strip (160x50x1mm) Nos.
223 29000849 8 SWG GI wire Kg
224 29001124 PVC Sleevs-40x6 Mtr
225 29001054 PVC Sleevs-50x6 Mtr
226 29000344 MS Flat 40x6 MT
227 29000345 MS Flat 50x6 MT
228 29000590 MS Flat 75x8 MT
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

29000862/
229 32mm dia MS rod for earth mat MT
29001001
GI Flat 75x8- Approx.45 meters per Burried
230 MT
rail
231 Fire Buckets & Other safety equipment Nos. Local purchase
232 Buried Rail
Protective Screens-Separate Attachment as
233
per requirement
234 SWS 29001835 G.S. Bolt 8x40/30- 15 nos per SWS Nos.
235 SWS 29001836 G.S washer 8 dia -15 nos per SWS Nos.
236 SWS 29001837 G.S Nut 8 dia - 15 nos per SWS Nos.
237 SWS 29001838 G.S Lock Nut 8 dia - 15 nos per SWS Nos.
29001466/ Split Cottor Pin 5x40 IS 549 Steel galvanised-
238 SWS Nos.
29000136 75 nos per SWS
239 AT, NP 29000251 G.S. Bolt 10x35/30 Nos.
240 GT 29000507 G.S. Bolt 10x50/26 (10X50/37) Nos.
241 TSS 29001779 G.S. Bolt 12x30/20 Nos.
242 SWS 29000506 G.S. Bolt 12x35/30 Nos.
243 TSS 29001696 G.S. Bolt 12x40/30 Nos.
244 TSS 29000654 G.S. Bolt 12x45/30 Nos.
245 SWS 29001520 G.S. Bolt 12x50/37 Nos. to be chk
246 TSS Dia 12 x 50 x 30 Bolt, N, LN (SS) Nos.
247 SSP 29002103 20 DIA SNAP HEAD PIN WITH F WASHER & SP Nos.
248 NP 29001233 G.S. Bolt 12x200/49 Nos.
249 NP 29001619 G.S. Bolt 12x500/49 Nos.
29000508/
250 SWS G.S. Bolt 14x50/37 Nos.
29001846
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

29000253/
251 FAS 2490-2 G.S. Bolt 14x75/34 (14x75/38) Nos.
29001503
252 TSS 29001697 G.S Bolt 16x35/20 Nos.
253 ISO 29000324 G.S Stud Bolt 16x30/25 Nos.
254 FAS 2277 29000258 G.S. Bolt 16x40/32 with Hole Nos.
255 16/3 29000259 G.S. Bolt 16x50/38 Nos.
256 29000260 G.S. Bolt 16x60/38 Nos.
257 29000998 G.S. Bolt 16x65/38 Nos.
258 SWS 29001523 G.S. Bolt 16x75/38 Nos.
259 TSS 29002104 G.S. Bolt 16x100/65 Nos.
260 SWS 29001699 G.S. Bolt 16x150/38 Nos.
261 TSS 29001522 Dia 16 x 150 / 40 B, N. LN (GS ) Nos.
G.S. Bolt 16x175/65 (GS BOLT 16X175/44 MM
262 TSS 29001910 Nos.
& GS BOLT 16X175/38 MM)
263 TSS Dia 16 x 200 / 100 Bolt, N, LN (GS) Nos. not found in main sheet
264 29000254 GS Bolt 16x220/57 Nos. to be chk
265 29000255 GS Bolt 16x260/57 Nos.
266 Dia 16 x 260 / 100 Bolt, N, LN (GS) Nos. not found in main sheet
267 Dia 16 x 360 / 57 Bolt, N, LN (GS) Nos. not found in main sheet
268 29000257 GS Bolt16X360/65 Nos.
269 SWS 29000513 GS Bolt 18X50/37 Nos.
DA 29000265
270
SPS,FEEDER GS Bolt20x50/38 Bolt (20x50/37 & 20X50/46) Nos.
271 29000267 GS Bolt 20x65/38 Bolt Nos.
272 29002102 Dia 20 x 65 / 45 Bolt, N. LN (GI ) Nos.
273 SWS, TSS 29001702 G.S. Bolt 20x75/46 Nos.
274 29000270 G.S. Bolt 20x85/46 Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

275 ANC 29000261 GS Bolt 20x230/65 Nos.

276 ANC 29000262 GS Bolt 20x260/65 (20x260/68) Nos.
277 ANC 29000263 GS Bolt 20x280/65 ( 20X280/68) Nos.
278 ANC 29000613 GS Bolt 20x330/65 Nos.
279 ANC GS Bolt 20x360/65 Nos.
280 ANC 29000987 GS Bolt 20x380/65 (20x380/68) Nos.
281 ANC GS Bolt 20X480/65 Nos.
282 29000266 GS Bolt 20x550/65 (20x550/68) Nos. 44nos pend to rcd.
283 AT SPS,ANC 29000268 GS Bolt 20x650/65 (20X650/68) Nos.
284 AT SPS,ANC 29000269 GS Bolt20x700/65 Nos.
285 FAS 5221,5222 29000271 G.S. Bolt 24x70/54 with Hole Nos.
29000293/
286 J-Bolt 16x120/65 Nos.
29001704
287 J-Bolt 16x200/60 Nos.
288 J-Bolt 16x220/60 Nos.
289 ISO 29000294 L-Bolt 16x65/45 Bolt Nos.
290 FAST 2130 29000325 2133 U-Bolt GS 14 MM Nos.
291 AT,NP,GT 29000276 10mm GS Nut Nos.
292 NP 29000521 12mm GS Nut Nos.
293 29000277 14mm GS Nut Nos.
294 29000278 16mm GS Nut Nos.
295 29000515 18mm GS Nut Nos.
296 29000279 20mm GS Nut Nos.
297 24mm GS Nut Nos.
298 TSS 29001512 12mm GS Lock Nut Nos. GI/GS
299 29000272 14mm GS Lock Nut Nos.
300 29000273 16mm GS Lock Nut Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

301 29000274 20mm GS Lock Nut Nos.

302 29000275 24mm GS Lock Nut Nos.
303 AT 29000280 10mm GS Plain washer Nos.
304 NP 29000315 12mm GS Plain washer Nos.
305 29000281 14mm GS Plain washer Nos.
306 29000282 16mm GS Plain washer Nos. 84258nos pend TO RCD
307 29000283 20mm GS Plain Washer Nos.
308 NP 29000290 10mm G.S. Spring Washer Nos.
309 NP 29000517 12mm G.S. Spring Washer Nos.
310 29000291 14mm G.S. Spring Washer Nos.
311 AT,NP 29000292 16 mm G.S. Spring Washer Nos.
312 29000248 10mm GS Bewelled Washer Nos.
313 29001239 12mm GS Bewelled Washer Nos.
314 29000249 16mm GS Bewelled Washer Nos.
315 29000250 20mm GS Bewelled Washer Nos.
316 NP 29000295 10mm Lead Washer Nos.
317 29000132 2.5x25mm Copper split pin Nos.
318 4x32mm Copper split pin Nos.
319 29000134 4x40mm Copper split pin Nos.
320 29000135 4x36mm Copper Split Pin Nos.
321 29000136 5x40mm Copper Split pin Nos.
322 2391-1,2392 29000137 6x35 Aluminium rivet Nos.
323 BKT 29000242 6x60 Copper rivet Nos.
324 29000241 6x50 Copper rivet Nos.
325 Buried Rail 29001839 20x35 Copper Rivet-12 nos per buried rail Nos.
326 1580 29000140 16x70 GS SHP Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

327 2130 29000141 16x55 GS SHP Nos.

328 1110-2,1130,11 29000142 20x50 GS SHP Nos.
40
329 1271-1,1360 29000143 20x55 GS SHP Nos.
330 5030
5040 Nos.
20x60 GS SHP
331 5020-1,5020-2 29000145 20x65 GS SHP Nos.
334 10/14 29000300 SS Bolt 10X25/20 (drop Bkt) Nos.
335 10/16 29000302 SS Bolt 10x35/30 with hole for copper split pin Nos.
336 101-S 29000301 SS Bolt 10x35/30 Nos.
337 10/20 29000303 SS Bolt 10x65/30 Nos.
338 10/19 29000304 SS Bolt 10x70/26 Nos.
339 12/14 29000318 SS Stud Bolt 12x25/20 Nos.
340 12/17 29000305 SS Bolt12X45/30 Nos.
341 29000971 SS 12X50 / 30 BHOLT LN Nos.
342 12/19 29000306 SS Bolt12X60/30 Nos.
343 16/3 29000307 SS Bolt16X50X38 Nos.
344 1162-S 29000320 SS U Bolt, Dia 10 mm. 10x104 mm. Nos.
345 1173-S. 29000321 SS U Bolt, Dia 10 mm. 10x144 mm Nos.
346 1583-S 29000323 SS U Bolt for 1580, Dia 12 mm. 12x190 mm Nos.
347 1603-S 29000322 SS U Bolt, Dia 12 mm. 12x171 mm Nos.
348 2124-S 29000317 SS Stud Bolt (Direct Cat. Clamp Stud) 12x45/25 Nos.
349 2404-1S. 29000308 SS Bolt for Part No. 2404, Cone Point 10x35/30 Nos.
350 6034-S 29000319 SS U Bolt (for Bracket Insulator), Dia 10 mm. Nos.
351 108-s 29000311 SS Nut 10mm Nos.
352 118-S 29000312 SS Nut 12mm Nos.
353 16 N 29000313 SS Nut 16mm Nos.
354 29001072 SS Nut 20mm Nos.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

355 109-S 29000309 SS Lock Nut 10mm Nos.

356 119-S 29000310 SS Lock Nut 12mm Nos.
357 29000314 10mm SS Plain Washer Nos.
358 29000516 12mm SS Plain Washer Nos.
359 29000296 10 mm PB Spring Washer Nos.
360 29000297 12 mm PB Spring Washer Nos.
361 29000298 16mm PB Spring Washer Nos.
362 161-s 29000316 SS 10x35mm steel pin 161-S Nos.
363 6182s 29001620 6182S, SS Pivot pin wt hole M10X25 Nos.
6182s 29000612 6182S, SS Pivot pin wt flat head pin M10X35 Nos.
364 3051 Stay / Bracket Chair(1.30M)
365 3076-1 Standard Backing Angle(150)
366 3076-2 Standard Backing Angle(200)
367 3076-3 Standard Backing Angle(250)
368 3076-4 Standard Backing Angle(300)
369 3076-8 Standard Backing Angle(400)
370 3100 MCC Extension chair
371 3110 Rt chair 2.6mtr long
372 3121 MCC Channal
373 3122 MCC Clamp (200)
374 3123 MCC Clamp (280)
375 3124 MCC Clamp (300)
376 3131-1 Adopter(200)
377 3131-2 Adopter(250)
378 3131-3 Adopter(300)
379 3231 Mast Anchor fitting
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

380 3232 Mast Bracket fitting

381 3233
382 3234
383 3236
384 3241 Mast Anchor Fitting (300)
385 3241-S Mast Anchor Fitting (300) Eccentric
386 3242 Mast Guy Rod Fitting (300) -3242
387 3243 Mast Guy Rod Fitting (300) -3243
388 3251 Anchor Adopter (450)
389 3251-S Anchor Adopter (450) Eccentric
390 3252 Anchor Adopter (550)
391 3252-S Anchor Adopter (550) Eccentric
392 3271 Anchor Fitting(150)
393 3272 Guy Rod Fitting (150)
394 3273 Backing Angle (150)
395 3281 Mast Anchor fitting(250)
396 3282 Mast Guy rod fitting (250)
397 3283 Backing Angle (250)
398 3291 Anchor Adopter(600)
399 3291-S Anchor Adopter(600) Eccentric
401 3301-1 Number Plate Mounting Clamp
402 3301-2 Number Plate Mounting Clamp
403 3301-3 Number Plate Mounting Clamp
404 3302-1 Number Plate Mounting Clamp
405 3302-2 Number Plate Mounting Clamp
406 3302-3 Number Plate Mounting Clamp
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

407 3304 Number Plate Mounting Clamp

408 3305 Number Plate Mounting Clamp
409 3306 Number Plate Mounting Plate
410 3307 Number Plate Mounting Plate
411 3308 Number Plate Mounting Plate
412 3309-1 Number Plate Mounting Plate
413 3309-2 Number Plate Mounting Plate
414 3331 Number Plate Mounting Clamp
415 3336 Number Plate Mounting Clamp
416 3332 -1 Number Plate Mounting Clamp
417 3339 Number Plate Mounting Clamp
418 3338 Number Plate Mounting Clamp
419 3334 Number Plate Mounting Clamp
420 3339 - 1 Number Plate Mounting Plate
421 3339 - 2 Number Plate Mounting Plate
422 3335 Number Plate Mounting Plate
423 5062 Guide Tube Bracket (80)
424 5062-1 Guide Tube Bracket (150)
425 5062-2 Guide Tube Bracket (200)
426 5062-3 Guide Tube Bracket (250)
427 5062-4 Guide Tube Bracket (300)
428 5062-5 Guide Tube Bracket (450)
429 5062-6 Guide Tube Bracket (550)
430 5062-7 Guide Tube Bracket (600)
431 8011 Short Supermast Channel
432 8012 Batten Plate Type - 1
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

433 8013 Supermast Cross Arm(0.80M)

434 8014 Suspension support Angle for 9T insulator
435 8014-1 Suspension support Angle(76mm)
436 8015 Supermast Cross Arm(1.50m)
437 8016 Battern Plate Type - II
438 8021 Long Supermast Channel
439 8022
440 8031 Bracket Attachment for Portal
441 8032-1 Clamping Angle for 8031 N type portal
442 8032-2 Clamping Angle for 8031 O type portal
443 8032-3 Front Clamping Angle for R type portal
444 8032-4 Front Clamping Angle for G type portal
445 8032-6 Front Clamping Angle 'P&BFB' portals
446 8051 Portal Supermast
447 8051 SPL Portal Supermast
448 8052 Base Clamping Angle on N portal
449 8053 Base Clamping Angle on 'O' portal
450 8061 Medium Supermast Channel
451 8071 Suspension Support angle 8071
452 8071A Suspension Support angle 8071A
453 8084-1
454 8084-2
455 8084
456 9014-1 9014-1
457 9014-2
458 9027 9027
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

459 9027A
460 9031-1
461 9031-2
462 9031-3 Flat 50x8 375 Long
463 9032-1
464 9032-2
465 9032-3 Flat 110x8 375 Long
466 9032-4
467 9032-5
468 9032-6 Flat 50x8 375 Long
469 9034-4 9034-4
470 9034-5
471 9035-1
472 9035-2
473 9036 Angle 75x75x6 and 90x90x6, 2.56m Long
474 9037 Angle 75x75x6 810 Long
475 9038 9038
476 9038A 9038A
477 9039 Channel 150x75 620 Long
478 9039A Channel 150x75 620 Long
50 X 50 X 6, 400 L Welded with 160 x 6 thick
479 9210-1S
Plate
480 9210-2S ISA 75 X 75 X 6 , 2500 Long
Cross arm Support Angle 65x65x6, 1.5 m
482 P 9061
Long
483 P 9063 Anti-climbing Device TYPE-A
484 Anti-climbing Device TYPE-B
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

485 Anti-climbing Device TYPE-A&B

486 Anti-climbing Device TYPE-C
487 0076-4 DA Clamping Channel 125X65X1180 long
488 0076-2 DA mounting Channel 125X65X450 long
489 0076-2A DA Mounting ~hannel 125x65x550 Long (Ref - 5A)
490 8054-1 Clamping Angle on "N" type portal, forwarded to Cell 538
491 8054-2 Clamping Angle on 'O' type portal, forwarded to Cell 539
492 8054-3 Clamping Angle on 'R' type portal, forwarded to Cell 540
493 0076-3 Clamping Angle 65X65X6 for TTC Boom
494 0076-1 6x6 BFB Drop Arm 2.875m Long
495 0076-1A 8x6 RSJ Drop Arm
496 0076-1SPL Cut DA-1 length 1.875 m
497 0076 - 1 SPL 6 x 6 DA ( 3.375Mtrs)
498 0076 - 1ASPL 8 x 6 DA ( 3.375Mtrs)
499 42LAS-2 42 kV LA structure - style - 2
500 MCT-STR Metering Current Transformer (Structure)
501 MPT-STR Metering Potential Transformer (Structure)
502 S-100 S-100
ETI / C /0044
503 S-101
MOD A
504 S-102
505 S-103 S - 103 (ISTR Beam 100x50x 5.070m)
506 S-104 S - 104 ( ISTR Support Cross beam (100 x 50 x 2.660m)
507 S-105
508 S-105/1 S - 105 / 1 (ISTR Support Beam (100 x50 x 3.370m)
509 S-106
510 S-107
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

511 S-108 S - 108 LA support Channel & PT Support (100 x 50 x 0.394m)

512 S-109 S - 109 (Insulator Plate 390 x 150 x 8 Thick)
513 S-110 L.T Supply Transformer Support Channel (200x75 1.343 m Long)
514 S-111 S - 111 ( insulator Plate 390 x 200 x 8Thick)
515 S-112
516 S-113
517 S-114
518 S-115
519 S-116
520 S-117 S - 117 Anchor Beam 6 mtr for main gantry mast 5.838
521 S-118 S - 118Main support Beam for (100 x 50 x 6.150m)
522 S-119
523 S-120
524 S-121 S - 121 P.T Support Beam (100x50x6.150)
525 S-122
526 S-123 S - 123 Insulator & LA beam (100x75x6150)
527 S-124
528 S-125 S - 125 Cross feeder attachment (174x50x10TH Plate)
529 S-126 S - 126 Backing plate for For cross feeder attachment S - 125
530 S-127 S - 127 Gusset Plate
531 S-127/1
532 S-128
533 S-129 S - 129 Cross angle for Insulator Support
534 S-130 S - 130 Knee angle for Isolator support
535 S-131
536 S-132
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

537 S-133
538 S-134
539 S-135
540 S-136
541 S-137
542 S-138
543 S-139
544 1-S OUT RIGGER 1 STYLE
545 2-S
546 3-S
547 05513-1
548 05513-2
549 05513-3
550 05513-3A
551 05513-4
552 05513-5
553 05513-6
554 05513-7
555 05513-7A
556 05513-8
557 05513-8A
558 05513-9
559 05513-9A
560 05513-9B
561 SSP-1
562 SSP-3
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

563 NS-7
564 NS-8
566 ETI/PSI/032
567 ETI/C/0191-1
568 ETI/C/0191-2
569 ETI/C/0191-3
570 ETI/C/0191-4
572 AT-01/1A
573 AT-01/1B
574 AT-01/1C
575 AT-01/2A
576 AT-01/2B
577 AT-01/2C
578 AT-01/3A
579 AT-01/3B
580 AT-01/3C
581 AT-01/4A
582 AT-01/4B
583 AT-01/4C
584 AT-01/5A
585 AT-01/5B
586 AT-01/5C
587 S-1 S-1
588 ETI/C/0181 (C) S-6
ETI/C/0183/
589 S-8
(MOD-C)
590 B150 B-150
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

591 B175 B-175

592 B200 B-200
593 B-225
594 B-250
595 Bridge Mast as per Designs
596 Mast (B-200) 11.40 mtr H/Rise
597 Mast (B-250) 11.40 mtr H/Rise 08mm
598 Mast (B-250) 11.40 mtr H/Rise 10mm
599 Mast (B-250) 11.40 mtr H/Rise
600 NU NU (10.445 mtr)
NU (12.445
601
mtr) NU (12.445 mtr)
602 NE1 NE-1 (5.38 mtr)
603 NE2 NE-2 (5.88 mtr)
604 NB1.50 NB1.50
605 NB 3.00 NB 3.00
606 NB 4.50 NB 4.50
607 NB 6.00 NB 6.00
608 NB-7.5 NB 7.50
609 NB-9 NB 9.00
610 NC NC
611 NK NK
612 OU OU (10.535 mtr)
OU (12.535
613
mtr) OU (12.535 mtr)
614 OE1 OE 1 (10.548 mtr)
615 OE2 OE 2 (11.048 mtr)
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

616 OB1.50 OB1.50

617 OB-3 OB 3.00
618 OB 4.50 OB 4.50
619 OB-6 OB 6.00
620 OB 7.50 OB 7.50
621 OB-9 OB 9.00
622 OC OC
623 OK OK
RU (10.580
624
mtr) RU (10.580 mtr)
RU (12.580
625
mtr) RU (12.580 mtr)
626 RE-1 RE-1
627 RE-2 RE-2
628 RB7.5 RB7.5
629 RB 9.00 RB 9.00
630 RB (10.50 mtr) RB (10.50 mtr)
631 RB (12.00 mtr) RB (12.00 mtr)
632 RB (13.00 mtr) RB (13.00 mtr)
633 RC RC
634 RK RK
GU (10.80
635
MTR) GU (10.80 MTR)
GU (12.80
636
MTR) GU (12.80 MTR)
637 GE-1 GE-1
638 GE-2 GE-2
639 GC-1 GC-1
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

640 GC-2 GC-2

641 GK GK
BFBU (10.66
642
MTR) BFBU (10.66 MTR)
BFBU (12.66
643
MTR) BFBU (12.66 MTR)
644 BE-1 BE-1
645 BE-2 BE-2
646 BK BK
ETI/C/0077/
647
MOD-A SH2 TTC 17 UP RIGHT
ETI/C/0077/
648
MOD-A SH3 TTC 17 BOOM (8.00 Mtr)
ETI/C/0077/
649
SH-3A TTC 17 BOOM (10.00 Mtr)
ETI/C/0077/
650
MOD-A SH-4 TTK (3&4)
651 TTU TTU (10.135 MTR)
TTU (12.135
652
MTR) TTU (12.135 MTR)
653 TTB-5.5 TTB (5.50 MTR)
654 TTB-8 TTB (8.00 MTR)
TTB (10.00
655
MTR) TTB (10.00 MTR)
656 TTK -1 & 2 Set TTK-1 & 2
657 T-150 T-150
DMA 3.85
658
(RSJ) DMA 3.85 (RSJ)
DMA 4.35
659 DMA 4.35 (RSJ)
(RSJ)
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

DMA 4.85
660
( RSJ) DMA 4.85 ( RSJ)
DMA 4.75
661
( RSJ) DMA 4.75 ( RSJ)
662 G/1402 DMA Attachment
663 U1 U1 (3000 mm)
664 1/U1 U1/1 (3000 mm)
665 U2 U2 (3000 mm)
666 U3 U3 (3000 mm)
667 U4 U4 (3000 mm)
668 U5 U5 (3000 mm)
669 U6 U6 (3000 mm)
670 U7 U7 (3000 mm)
671 U8
Power Block Working Limit Board – (as per
672 7574
Drawing No.ETI/OHE/P-7574)
Staff Caution Board (Size 450x450mm)-(as per
673 7561
Drawing ETI/OHE/P-7561)
Public Caution Board (Size 300x250mm)- (as
674 7551
per Drawing ETI/OHE/P-7551)
Unwired Turnout Board – (as per Drawing ETI/
675 7573
OHE/P-7573)
Electric Engine Stop Board – (as per Drawing
676 7572
ETI/OHE/P-7572)
677 436 Caution Clearance to OHE nearby restricted
Danger Board for Height Guage (as per
678 0069
Drawing ETI/C/0069)
Caution Plate 25000V - (as per Drawing ETI/
679 7531
OHE/P-7531)
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

Retro Reflective type PTFE Board (set of 6

680 355 psc -Lower Panto, Raise Panto,500 mtr.,250
mtr., DJ ON, DJ OFF )
Retro reflective number plate (as per Drawing
681 7503
ETI/OHE/P-7503)
Retro Reflective Type Sigma Plate/Board (as
682 36 per RDSO Dawing No./TI DRG/OHE/PLTBRD/
RDSO/00036/12/0 or latest)
Structure Number Plate (ETI/OHE/P-7501),
683 7501
Retro Reflective
684 7511 Isolator Number Plate (RE/33/P-7511)
685 Equipment Number Plate
686 Shock treatment Chart
687 SWS Name Board
688 Name board TSS
689 Restricted area board
690 TSWR in Station
691 Schematic Diagram board SWS
692 Schematic Diagram board TSS
693 Key Board TSS/SWS/Station
694 Blank Structure Number plates
695 Retro reflective yellow colour tape (Rolls)
TOWER T1 (WT. OF T1=517.549+WT. OF
696 ETI/C/0202 (H)
BOLT=28.72)
697 ETI/C/0206 (D) STUB FOR TOWER T1
TOWER T2 (WT. OF T2=578.142+WT. OF
698 ETI/C/0203 (G)
BOLT=34.115)
699 ETI/C/0207 (D) STUB FOR TOWER T2
700 ETI/C/0201 (G) BEAM-11 meter
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

701 ETI/C/0201 (G) BEAM-9 meter

702 ETI/C/0310 132KV DPI (WITH EARTHING BLADE)
703 ETI/C/0310 132KV DPI (WITHOUT EARTHING BLADE)
704 ETI/C/0320 (E) 132KV SUPPORT INSULATOR STR.
705 ETI/C/0330 (F) 132KV CURRENT TRANSFORMER STR.
706 ETI/C/0300 (E) 132KV POTENTIAL TRANSFORMER STR.
707 ETI/C/0340 (F) 120KV LIGHTNING ARRESTOR STR.
708 ETI/C/0360 (F) 25KV CURRENT TRANSFORMER STR.
709 ETI/C/0390 (E) 25KV POTENTIAL TRANSFORMER STR.
710 ETI/C/0380 (F) 25KV SINGLE POLE ISOLATOR STR.
711 ETI / C / 0400 132 kv CB structure
712 ETI/C/0043(B) 10KV / 240V AUX. TRANSFORMER STR.
ETI/C/034 (K) AUX. TRANSFORMER SUPPORT CHANNEL
713
(S-110)
714 AS PER RDSO 25kV CB (SINGLE POLE) STRUCTURE
715 ETI/SK/C/0180 25KV DOUBLE POLE ISOLATOR STR.
ETI/C/0370 25KV SUPPORT ISNULATOR STR. (HT - 6183)
716
STY-01 (I)
ETI/C/0370 25KV SUPPORT ISNULATOR STR. (HT - 5100)
717
STY-02 (I) WITH LA
ETI/C/0370 25KV SUPPORT ISNULATOR STR. (HT - 3800)
718
STY-03 (I)
ETI/C/0370 25KV SUPPORT ISNULATOR STR. (HT - 5100)
719
STY-04 (I) WITHOUT LA
720 CAPACITOR BANK STRUCTURE
721 Series reactor structure
GI 16x690/90 bolt with nut, lock nut, tapper
722 Box bolts
washer & punched washer
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

723 Integral Lock GI 6X60 mm bolt with nut, L.nut & washer
Lock Pads suitable for Isolator handles, Shall
724 Lock Pads
be procured locally
Connector for LT Transformer 10kVA - AT (1
725
for HV Side, 2 for LV Side)
726 Inter Lock for Double Pole Isolator
727 Potential Transformer Connectors
728 S-3
729 S-5
Fencing
730 Gate (1630mm)
Pannel SPL
731 P2 SPL (2699.5 mm)
Fencing
732 P1 (2500 mm)
Pannel SPL
733 Gate (4575 mm)
734 P-1 SPL (2212.5mm)
735 P-2 SPL (1712.5mm)
736 P-3 SPL (112.5mm)
737 P-4 SPL (312.5mm)
738 Gate SPL (1500 mm)
739 P-3 SPL (1412.5)
740 P-4 SPL (1512.5mm)
741 SPL-Panel (1000mm)
742 SPL-Panel (2000mm)
743 SPL-Panel (2012mm)
744 SPL-Panel (2412mm)
745 SPL-Panel (2425mm)
746 SPL-Panel (3000mm)
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

Fencing
747
Pannel SPL P-1 SPL (425mm)
748 P-2 SPL (1412.5mm)
749 P-3 SPL (1512.5)
750 P1 (2938 mm) P1 (2938 mm)
P2 (2699.5
751 P2 (2699.5 mm)
mm)
752 P3 (2712 mm) P3 (2712 mm)
753 P4 P4
Gate (1580
754 Gate (1580 mm)
mm)
755 11220 TERMINAL CONNECTOR (EXPENSION TYPE)
756 TERMINAL CONNECTOR ON 42KV L.A.
757 TERMINAL CONNECTOR ON 25KV DROP OUT FUSE SWITCH
758 Terminal Connector on LV Side of 25kV AT
759 2 SWG Copper Wire (HDBC)
760 19/3.99mm AAC Spider Conductor
761 Flexible strip for Isolator Handle
762 Connector for interruptor
763 Connector for LA
764 Operating Gear for Double Pole Isolator
765 8" x 6" x 35 RSJ
766 PVC CABLE TRAY 45 X 45MM
767 Cable Gland 21mm
768 Cable Gland 25mm
769 Cable Gland 32mm
770 Lugs 2.5 Sqmm Hook
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

771 Lugs 2.5 Sqmm Round

772 Lugs 4.0 Sq.mm Hook
773 Lugs 4.0 Sq.mm Round
774 Cable Tie 150mm
775 Cable Tie 300mm
776 Cable Tie 250mm
777 Cable tag (Al)
778 50DIA GI PIPE 3 Mtr
779 15A ICDP SWITCH FUSE BOX
780 SCHEMATIC LAYOUT DIAGRAM BOARD OF SWS
781 230V FUSE BOX
782 L.T. DISTRIBUTION BOARD
783 TELEPHONE
784 TELEPHONE STAND (WOODEN)
785 FIRST AID BOX
786 12V BATTERY FOR TELEPHONE
787 KEY BOX
788 FIRE BUCKET WITH STAND SET
789 FIRE EXTINGUSHER TYPE ABC 6KG.
790 230V PLUG FOR 24V BATTERY CHARGER
791 230V PLUG FOR 12V BATTERY CHARGER
792 WRITING STAND WITH BOX
793 FIRE BOX WITH STAND
794 HYDROMETER & THERMOMETER WITH STAND IN SET
795 6 Way Distribution board
796 a) 6 way D.B. with D.P. MCB
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

797 b) 32A
798 C) 6A SP MCB
799 B.H. Light Fitting
800 Exhaust fan 300mm sweep
801 3 Pin, 5A Plug socket
802 3 Pin, 15A Plug Socket
803 HP 5V Fitting with Lamp(150V)
804 3 Feet LED Pattern fitting
805 Ceiling Fan
Special RSJ DA Arrangement (3.62 Mtr
806
Length)
ISMC 125x65 - 2Nos. OF 900 MM LENGTH
807 WELDED AS SQUARE BOX FOR MOUNTING
DROP ARM OF 900 MM LENGTH.
MS PLATE 100x710X12 MM THICK WELDED
808
TO ITEM No. 1
30 MM ∅, L - SHAPED FULLY THREADED
GALVANIZED BOLT WITH NUT, CHECK NUT
809 AND WASHER, SPLIT PIN. ALL BOLTS USED
ARE MINIMUM GRADE 8.8 AND SHALL
CONFIRM TO IS: 1367-2002.
ISMC 125x65 FOR CLAMPING DROP ARM OF
810
LENGTH 1000 MM.
R.S.J DROP ARM (203x152) OF LENGTH 3620
811
MM
ELASTOMIARIC PACKING OF SIZE
812 125X90X25 MM THICK WITH 2 HOLES OF 32
MM ∅.
BOLT 20 Ø mm 50/38 WTIH NUT LOCK NUT,
813 WASHER & Split Pin.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

GI BOLT 20 Ø mm 190/65 WITH NUT,LOCK

814
NUT WASHER & Split Pin.
MS PLATE 900x80X10 MM THICK WELDED
815
TO ITEM No. 1
MS ANGLE 75X75X8 OF LENGTH 1000 MM TO
BE FIXED AT THE BOTTOM OF "L" SHAPPED
816
BOLTS CONNECTING ON ONE SIDE OF MAIN
TOP CROSS GIRDER.
817 Areal Earth wire Termination
818 ISMC 200X75 OF LENGTH 1580 MM.
819 ISMC 200X75 OF LENGTH 890 MM.
28 MM ∅, 1250 MM LONG FULLY THREADED
GALVANIZED BOLT WITH NUT, CHECK NUT
820 AND WASHER, SPLIT PIN ALL GALVANIZED.
ALL BOLTS USED ARE MINIMUM GRADE 8.8
AND SHALL CONFIRM TO IS:1367-2002.
STIFFENER PLATE 10mm THICK TO SHAPE
821 (180x65x10) WELDED TO FLANGES AND
WEB.
ELASTROMIARIC PACKING OF SIZE 1360 X
822
220 X 20 INBETWEEN GIRDER AND ISMC200.
ELASTROMIARIC PACKING OF SIZE 620 X
823
220 X 20 INBETWEEN GIRDER AND ISMC200.
EARTH WIRE MAST CLAMP AS PER
824
DRAWING No. ETI/OHE/P/7040
825 3231-2 Mast Anchor fitting (3231-2)
300X200X12 TH. MS PLATE WELDED WITH
826 ISMC200 FOR FIXING OF EARTH WIRE MAST
CLAMP.
400X200X12 TH. MS PLATE WELDED WITH
827 ISMC200 FOR FIXING OF EARTH WIRE MAST
CLAMP.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

MS ANGLE 40X40X5 OF LENGTH 450MM

828 WELDED TO FLANGE OF ISMC200 & MS
PLATE 12MM THICK
MS PLATE Stiffner Plate 10MM THICK To
829 Shape 82x60x10 Welded to Base Plate and
Eart Wire Mast Clamp.
830 Earth wire strain clamp (RI No - 7050 )
831 20mm Strain Clap (RI No-1600)
18mm Single Clevies assly (Modified) (RI NO
832
5040-1)
833 RI-5010 (5 Ton Adjuster)
12.27 Dia mm steel Reinforced alu. Raccon
834
Conductor (50sq mm).
835 ATD Spring type as per RDSO Spec.
836 ISMC 200X75 OF LENGTH 1360 MM.
28 MM∅, 1260 MM LONG FULLY THREADED
GALVANIZED BOLT WITH NUT, CHECK NUT
837 AND WASHER, SPLIT PIN ALL GALVANIZED.
ALL BOLTS USED ARE MINIMUM GRADE 8.8
AND SHALL CONFIRM TO IS:1367-2002.
STIFFENER PLATE 10mm THICK TO SHAPE
838
(180x65x10)
ELASTOMIARIC PACKING OF SIZE & SHAPE
839 1060X220X20 INBETWEEN GIRDER AND
ISMC200.
ATTACHMENT AS PER RDSO DRG. No.ETI/
840
OHE/P/3021
300X200X12 TH. MS PLATE WELDED TO
841 ISMC200 TO FLANGES FOR FIXING OF
ANCHOR FITTING.
 8.5.24

ITEM
S.No RI NO ITEM DISCRIPTION UOM REMARKS SUPPLIER
CODE

125X200X10 TH. MS PLATE WELDED TO

842 ISMC200 IN WEB PORTION AT BOLT
LOCATION ON BOTH ENDS.
20 MM∅, 60 mm LONG FULLY THREADED
843 GALVANIZED BOLT WITH NUT, CHECK NUT,
WASHER & Split Pin.
MS ANGLE 40X40X5 OF LENGTH 350MM
844 WELDED TO FLANGE OF ISMC200 & MS
PLATE 12MM THICK
SPRING TYPE ATD. (TI/SPC/OHE/SPRINGATD/
845
01110/(03/2012)REV-1