GROUP - B*

(Short Answer Type Questions)

Answer any three from the following: 3x5=15
2. (a) Draw the circuit diagram of Schmitt Trigger using OPAMP(IC741). 1

(b) Explain the working principle of Schmitt Trigger Circuit with the help 3
of voltage transfer characteristics curve.
3. (a) Minimize the following Boolean Expression using K-Map 3 2

Y(A,B,C,D-Zn(4,6,7,12, 13,14,15)

Page 2 of 3
 NARULA INSTITUTE OF TECHNOLOGY
An Autonomous Institute under MAKAUT

(b) Convert the following hexadecimal number to Octal equivalent 2 2

(A23.4E)16
4. (a) Convert SR Flip Flop to JK Flip Flop 5 4

5. (a) Draw the circuit diagram of 4 bit PISO shift register 3 4

(b) What are the advantages and disadvantages of SISO shift register 2 4

6. (a) A6-bit DAChas a step size of 50mV. Determine the full scale output 5 3
voltage and the percentage resolution.
GROUP-C*
(Long Answer Type Questions)
Answer any three from the following: 3x15=45
7. (a) Draw the circuit diagram of class B power amplifier and derive the 5
expression of power conversion efficiency
(b) Draw the circuit diagram of Wein Bridge oscillator and derive the 5 1
expression of condition for sustain oscillation and frequency of output
signal.
(c) Draw the circuit diagram of astable multivibrator using IC-555 timer 5 1

and derive the expression of frequency of output signal.

8. (a) Implement full subtractor circuit using 4:1 multiplexer and necessary 6 3

logic gates.
(b) Draw the logic diagram of single bit comparator circuit with the help of 5 3
truth table.
(c) Minimize the following Boolean Expression using K-Map 4 2

Y(A,B,C,D)-[IM(1,2,3,8,9,10,11, 14).d(7,15)
9. (a) Simplify the Boolean function with K-Map and draw the simplified circuit: 10 2

F(w,x,y,z)-E(1,3,7, 11,15) and don't care conditions d(w,x,y,z)-X(0,2,5)

(b) Draw and explain Master Slave flip flop. 4

10. (a) What is race around condition of JK flip flop? How it can be resolved? 6
Explain with necessary diagram.
(b) Draw the circuit diagram 4-bit ring counter and twisted ring counter and 5 4

differentiate between them.

(c) Draw the circuit diagram of MOD-7 asynchronous counter and draw the 4 4
timing diagram of output.
11. (a) A class A power amplifier with a direct coupled load has a collector efficiency 5
of 30 % and delivers a power input of 10W. Find
(i)The DC power input
(ii) The power dissipation of full output
(ii) The desirable power dissipation rating of the BJT
(b) Subtract: (1010), from (1111)> using 2's complement method. 5

(c) Determine the maximum and minimum frequency of oscillations of a Wein 5

Bridge Oscillator circuit having a resistor of 10Ko and a variable capacitor od
1nF to 1000nF.

Page 3 of 3
 NARULA INSTITUTE OF TECHNOLOGY
An Autonomous Institute under MAKAUT

GROUP - B

(Short Answer Type Questions)

Answer any three from the following: 3x5=15
SL. NO. Marks CO
2 (a) 3 CO2
What do you mean by Universal Gate? Implement a NOT
gate using any Universal Gate.
(b) Define the Barkhausen criterion for oscillation 2 CO1
3. Design a Full Adder circuit using 2 half adder. 5 CO2

4 Draw and explain table. R-2R Digital-to-Analogue 5 CO4

Converter
5. 5 CO1
Draw the circuit diagram of class A power amplifier and
derive its power conversion efficiency.
6. (a) Perform the following conversion 2 CO2

(1101.11)2 = ( )i0
(b) Perform the following conversion 3 CO2

(4C.25)16 =( Ds
GROUP-C
(Long Answer Type Questions)
Answer any three from the following: 3x15=45

SL. NO. Marks CO

No.
7. (a) What is the need of Parity Generator and Checker circuit? CO3

(b) 8 CO3
Design a 3-bit priority generator circuit.
(c) What is the need of Priority Encoder Circuit and explain 5 CO3
how it works?
8 (a) Design a Full Adder circuit using a 3 to 8 Decoder 5 CO2

(b) Why De-Multiplexer is also known as Data Distributor? 1+4 CO2

Design a 8X 1Multiplexer using two 4 X 1Multiplexer

and a basic logic gate.
(c) Implement the following Boolean function 5

F(A,B,C,D)= 2 (0,1,3,4,8,9,15)using a 8:1 Multiplexer

9. (a) 2 CO3
Draw and explain the State diagram for S-R flip flop
(b) What is shift register? Mention the types of different shift 1+2 CO4
registers.
(c) Draw and explain a Serial In- Parallel Out (SIP0) left shift CO4

register.
(d) 5 CO4
Design a MOD-6 ripple counter and explain its operation
with necessary state table
10. (a) Draw the internal diagram of a 555 timer circuit. CO1

Odd semester theory examination 2021 under autonomy, 21-Jan-2022Page Page 3 of 4

 NARULA INSTITUTE OF TECHNOLOGY
An Autonomous Institute under MAKAUT

(b) Draw the circuit diagram of Monostable Multivibrator 5 CO1

using IC-555 timer.
(c) Draw the circuit diagram of RC phase shift oscillator using CO1
BJT and explain its operation.
11. Write short notes on any three of the following
(a) Successive approximation ADC CO4

(b) Single bit Comparator circuit 5 CO2

(c) Schmitt Trigger 5 CO1

(d) Master Slave flip flop 5 CO3

(e) 5 CO1
Positive Vs negative feedback

Odd semester theory examination 2021 under autonomy, 21-Jan-2022Page Page 4 of 4

 NARULA INSTITUTEOF TECHNOLOGY
An Autonomous Institute under MAKAUT

3. (i) Prove the following Boolean identity 03 IT303.2 Understanding

(A+B)(A+B')(A'+C)=AC.

(i) Convert Hexa decimal to binary number: (2ESA),6. 02 IT303.2 Applying

4. Explain 1-to-8 De-multiplexer by using logic gates. 05 IT303.3 Understanding
5 Solve the function using K map method IT303.2 Applying
F=Sm (1,2,4,6,7) + Xd (11,14)
6 Describe the operation of a 555 timer in astable mode. 05 IT303.1 Analyzing
GROUP-C
(Long Answer Type Questions)
(Answer any three of the following) 3x 15 = 45
SL Question Marks CO Blooms
Taxonomy
Level
7. What is Shift register? What are the different types of 02+ 04 + 09 IT303.3 Analyzing
shift register? Explain the working of Serial in parallel
outshift register with logic diagram.
8. Represent the following in both SOP and POS using 08+ 07 IT303.2 Understanding
Karnaugh map- (A'+B'+D') (A+B'+C')(A'+B+D')
(B+C'+D)

9. What is multi-vibrator? Draw and explain the working 15 IT303.1 Understanding

Principle of CMOS. In amonostable multivibrator R=
100KQ, and the time delay T= 100ms, Calculate the
value of C.

10. (i) Design a 2-bit Magnitude Comparator Circuit. 07 IT303.2 Applying

(ii) Explain 4-bit R-2R ladder type D/A converter. 08 IT303.4 Applying
11. Define Followings any three:
(i) 4-bit R-2R ladder type D/A converter 05 IT303.4 Applying
(i) Parity Generator 05 IT303.2 Analyzing
(ii) Successive approximation type A/D Converter 05 IT303.4 Understanding
(iv) Class AB Amplifier 05 IT303.1 Analyzing

(v) Encoder 05 IT303.2 Understanding

Odd semester theory examination 2022 under autonomy, 16th-DEC-22

Page 3 of 3
 B.Tech/lTIT303/0dd/R21/RI1

Group B
(Short Answer Type Questions)
(Answer any three of the following) 3x5=15
13. Explain Universal Gate with example? Implement a XORgate (5) CO2 BL3
using any Universal Gate. Write down the difference between
Combinational Circuit and SequentialCircuit.
14. Answer the following (5)
a) Write the Boolean expression for the output of the system shown in (2) CO3 BL4
figure.

b) Implement the following Boolean function with NAND NAND logic (3) CO3 BL5
F=E(0,1, 3, 5)

15. Answer the following (5)

a) Discuss the behavior of adiode when it is in reverse bias. explain (2) C03 BL3
breakdown.
b) Explain the role of the depletion region, the flowof minority carriers, (3) CO2 BL3
and the resulting current-voltage characteristics.
16. Answer the following (5)
a) What is the difference between latch and flip flop? (2) CO2 BL4
b) Defrentiate Synchronous and Asynchronous counters. draw 3-bit (3) C3 BL3
ripple counter.
17. What is the difference between Half Subtractor and FulI (5) C02 BL3
subtractor?
Design a Full subtractor circuit using 2 half-subtractor circuit.
Group C
(Long Answer Type Questions)
(Answer any three of the following) 3x15=45
18. Answer all the Questions (15)
a) Convert decimal to octal- (18.01)10 = (?)8 (5) C02 BL2
Convert binary to decimal (1001.001) 2=(?)10

b) Explain De-Morgan's laws for simplification of Boolean expression. (5) CO2 BL2

If AB+ ÄB=C, show that AC+ÃC=B

c) Simplify the following expression using K Map for the 4 variables A, (5) CO2 BL3
B, C, and D.
Y=m1+m3+m5+m7+m8+m9+m12+m13

12/15/2023 9:14:52 AM
 B.Tech/lTIT303/0dd/R21/R/1

19.Answer all the Questions (15)

a) Design a FullAdder circuit using a 3 to 8 Decoder (5) CO2 BL4

b)Why Multiplexer is also known as Data Selector? (5) C02 BL4

Design a 16 X 1Multiplexer using five 4 X 1 Multiplexer.
c) Implement the folowing Boolean function (5) C02 BL4
F(A,B,C,D)= m(0,1,3,4,8,9,15) using a 8:1 Multiplexer
20. Answer all the Questions (15)
a) Draw the internal diagram of a 555-timer circuit. (5) CO4 BL4

b) Design an monostable multivibrator using the 555 timer circuit (5) C04 BL4

c) What do mean by amplifier. Explain the operation of class A amplifier (5) CO3 BL4
with proper diagram.
21. Answer all the Questions (15)
a) Briefly explain the fundamental purpose of a Digital-to-Analog (7) CO4 BL6
Converter (DAC)in electronicsystems.Compare and contrast the
working principles of weighted resistor DAC and R-2R ladder DAC
architectures.

b)Discuss the key advantages of CMOS logic, including low power (8) CO3 BL5
consumption and high noise immunity. Provide examples of real
world applications where CMOS technology is commonly used.
compared with respectto ECL family.
22. Write short notes on any three of the following (15)
a) Successive approximation ADC (5) C04 BL4
b) Comparator circuit (5) CO3 BL4
c) Excitation table for -R flip flop (5) CO3 BL4

d)Operation Master Slave flip flop (5) C04 BL4

e) Barkhausen criterion for oscillation (5) C02 BL2
12/15/2023 9:14:52 AM