Training Report

on
“SolidWorks, 3D-Model Designing”

Submitted to :- MS. Pooja Singh

GOVERNMENT POLYTECHNIC KAIMUR

Department of science, Technology and Technical Govt. of Bihar

Discipline
Mechanical Engineering
(5th –Semester)

Submitted
by
Sudhir
Kumar
49/ME/22

Er. Zaki Anwer Call: 7979925756 For CAD Training & Projects
 Content

1. Course completion Certificate from CADD Centre

2. Acknowledgement

3. History of Designing & Part Modeling

4. Introduction to SolidWorks
4.1. Sketches
4.1.1.1. Origin
4.1.1.2. Planes
4.2. Dimensions
4.2.1.1. Driving Dimensions
4.2.1.2. Driven Dimensions
4.2.1.3. Sketch Definition

4.3. Relations
4.3.1.1. Sketch Complexity
4.4. Faeatures
4.5. Assemblies
4.6. Drawings
4.7. Model Editing
5. Step-by-Step of Sketching, Modeling, Assembly & Drawing View
Er. Zaki Anwer Call: 7979925756 For CAD Training & Projects

Er. Zaki Anwer Call: 7979925756 For CAD Training & Projects
 Acknowledgement

It is my pleasure to be indebted to various people, who directly or

indirectly contributed in the development of this work and who
influenced my thinking, behavior, and acts during the course of study.
I express my sincere gratitude to Mr. Ajoy Kumar worthy Principal
for providing me an opportunity to undergo summer training at CAD
Desk, Bhagalpur. I am thankful to Er. Zaki Anwer for his support,
cooperation, and motivation provided to me during the training for
constant inspiration, presence and blessings.
Lastly, I would like to thank the almighty and my parents for their moral
support and my friends with whom I shared my day-to-day experience
and received lots of suggestions that improved my quality of work.

Name:- Sudhir
Kumar(51/ME/22) Board Roll No. :-
511422522049
5th-Semester

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
History of Designing & Part Modeling
Solid modeling (or modelling) is a consistent set of principles for mathematical
and computer modeling of three-dimensional solids. Solid modeling is
distinguished from related areas of geometric modeling and computer graphics
by its emphasis on physical fidelity.Together, the principles of geometric and
solid modeling form the foundation of computer-aided design and in general
support the creation, exchange, visualization, animation, interrogation, and
annotation of digital models of physical objects.

The use of solid modeling techniques allows for the automation of several
difficult engineering calculations that are carried out as a part of the design
process. Simulation, planning, and verification of processes such as machining
and assembly were one of the main catalysts for the development of solid
modeling. More recently, the range of supported manufacturing applications has
been greatly expanded to include sheetmetal manufacturing, injection molding,
welding, pipe routing etc. Beyond traditional manufacturing, solid modeling
techniques serve as the foundation for rapid prototyping, digital data archival
and reverse engineering by reconstructing solids from sampled points on
physical objects, mechanical analysis using finite elements, motion planning
and NC path verification, kinematic and dynamic analysis of mechanisms, and
so on. A central problem in all these applications is the ability to effectively
represent and manipulate three-dimensional geometry in a fashion that is
consistent with the physical behavior of real artifacts. Solid modeling research
and development has effectively addressed many of these issues, and continues
to be a central focus of computer-aided engineering.

The historical development of solid modelers has to be seen in context of the

whole history of CAD, the key milestones being the development of the
research system BUILD followed by its commercial spin-off Romulus which
went on to influence the development of Parasolid, ACIS and Solid Modeling
Solutions. Other contributions came from Mäntylä, with his GWB and from the
GPM project which contributed, among other things, hybrid modeling
techniques at the beginning of the 1980s.
The modeling of solids is only the minimum requirement of a CAD system‟s
capabilities. Solid modelers have become commonplace in engineering
departments in the last ten years due to faster computers and competitive
software pricing. Solid modeling software creates a virtual 3D representation of
components for machine design and analysis. A typical graphical user interface
includes programmable macros, keyboard shortcuts and dynamic model
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
manipulation. The ability to dynamically re-orient the model, in real-time
shaded 3-D, is emphasized and helps the designer maintain a mental 3-D image.
A solid part model generally consists of a group of features, added one at a time,
until the model is complete. Engineering solid models are built mostly with
sketcher-based features; 2-D sketches that are swept along a path to become 3-
D. These may be cuts, or extrusions for example. Design work on components is
usually done within the context of the whole product using assembly modeling
methods. An assembly model incorporates references to individual part models
that comprise the product.
Another type of modeling technique is 'surfacing' (Freeform surface modeling).
Here, surfaces are defined, trimmed and merged, and filled to make solid. The
surfaces are usually defined with datum curves in space and a variety of
complex commands. Surfacing is more difficult, but better applicable to some
manufacturing techniques, like injection molding. Solid models for injection
molded parts usually have both surfacing and sketcher based features.

Introduction to SolidWorks
SolidWorks is solid modeling CAD (computer-aided design) software that runs
on Microsoft Windows and is produced by Dassault Systèmes SolidWorks
Corp., a subsidiary of Dassault Systèmes, S. A. (Vélizy, France). SolidWorks is
currently used by over 2 million engineers and designers at more than 165,000
companies worldwide.

Modules in SolidWorks
SolidWorks extends design application through full integration with best-inclass
solutions. Different Modules in SolidWorks:
• Part Modeling
• Assembly Modeling
• Surface Modeling
• Sheet Metal Design
• Drawing

Part Modeling:
This module produces parts easily and rapidly by creating features such as
extrudes, revolves, thin features, lofts, sweeps, advanced shelling, feature
patterns and holes.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
The 3D part is the basic building block of the SolidWorks mechanical design
software. In SolidWorks you can design a part by sketching its component
shapes and defining their size, shpe and inter relationships. By successfully
creating these shapes, called features, you can construct the part. The basic
modelling process for each part is as follows:
• Plan the part
• Create the basic features
• Analyse the remaining features
• Analyse the part
• Modify the features as necessary

Assembly Modeling:
Assembly design gives a user the ability to design with user controlled
associability. SolidWorks builds these individual parts and sub-assemblies into
an assembly in a hierarchical manner. This is based on the relationships defined
by the constraints.
SolidWorks assembly design reference parts directly and maintains relationships
when creating new parts. In the assembly module, you can perform physical
simulation and mechanical interaction between the parts and avoid any potential
design flaws.

Surface Modeling:
For designing dies, castings or injection moulds, surface modelling capability is
important. SolidWorks surface module can create complex models from
freeform shapes. You can create complex surfaces using lofts and sweeps with
guide curves, drag-handles for easy control and innovative surface features. The
basic process to create the surface model is as follows:
• Acquire the wireframe model
• Study the wireframe model
• Create and verify the required surface
• Output the surface model

Sheet Metal Design:

Sheet metal parts are generally used as enclosures for components or to provide
support to other component. We can design a sheet metal parts on its own
without any reference to the parts it will enclose, or you can design the part in
the context of an assembly that contains the enclosed components.
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Drawing:
2D drawing module develops complete production ready engineering drawings
without drawing the sketches, makes revisions quickly and accurately, and
generates bills of materials and balloons automatically, easily controlling and
alignment of balloons.

Features in SolidWorks:
SolidWorks is software developed for mechanical design engineers and contains
many features that facilitates the engineers to easily create and manage designs.
Some of the important features of SolidWorkds are as follows:
• Feature-based
• Parametric
• Solid modelling
• Fully associative
• Constraints

Feature-based:
Just as an assembly is composed of number of individual piece parts, a
SolidWorks model also consists of individual constituent elements. These
elements are called as Features. The features are applied directly to the work
piece as soon as they are created.
Features can be classified as either sketched or applied.
Sketched Features: These are created directly upon a 2D sketch. Generally the
sketch is transformed into a solid by extrusion, rotation, sweeping or lofting.
Applied Features: These are created directly on the solid model. Fillets and
Chamfers are examples of this type of features.

Parametric:
The dimensions and relations used to create a feature are captured and stored in
the model. This enables not only to capture your design intent, but also to
quickly and easily make changes to the model.
In the revolved body, hole size is reduced parametrically since all the circles are
driven by relations and dimension. A change in one hole reflects the others.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Driving dimensions: These dimensions are used while creating a feature. They
include the dimensions associated with the sketch geometry, as well as those
associated with the feature itself.
Relations: This includes information, such as parallelism, tangency, and
concentricity. By capturing this in the sketch, SolidWorks enables you to
capture your design intent up front, in the model.

Solid Modeling:
A solid model is the most complete type of geometry model used in CAD
systems. It contains all the wireframe and surface geometry necessary, to fully
describe the edges and the faces of the model.
In addition it has the information called „the topology‟ that releates the
geometry together. An example of topology would be which faces (surfaces)
meet at which edge (curve). This intelligence makes operation such as filleting
as easy as selecting an edge and specifying a radius.

Fully associative:
A SolidWorks model is fully associative with the drawings and the assemblies
that reference it. Changes to model are automatically reflected in the associated
drawings and assemblies. Similarly, you can make changes in the drawing or
assembly, and those changes will be reflected in the model.

Constraints:
Geometric relationships such as parallel, perpendicular, horizontal, vertical,
concentric and coincident are some of the constraints supported in SolidWorks.
In addition, equation can be used to establish mathematical relationships among
parameters. By using constraints and equations, you can guarantee the design
concepts, such as through holes or equal radii that are captured and maintained.

Design Intent
Design intent is your plan about how the model should behave when it is
changed. For example, if you model a boss with a blind hole in it, the hole
should move when the boss is moved.
To use the parametric modeler SolidWorks efficiently, you must consider the
design intent before modelling. Several factors contribute to how you capture
your design intent and they are:
• Automatic Relations

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
 • Equations
• Added relations
• Dimensioning

SolidWorks Fundamentals

Sketches:
The sketch is the basis for most 3D models.
Creating a model usually begins with a sketch. From the sketch, you can create
features. You can combine one or more features to make a part. Then, you can
combine and mate the appropriate parts to create an assembly. From the parts or
assemblies, you can then create drawings.
A sketch is a 2D profile or cross section. To create a 2D sketch, you use a plane
or a planar face. In addition to 2D sketches, you can also create 3D sketches that
include a Z axis, as well as the X and Y axes.
There are various ways of creating a sketch. All sketches include the following
elements:

Origin:
In many instances, you start the sketch at the origin, which provides an anchor
for the sketch.

The sketch on the right also includes a centerline. The centerline is sketched
through the origin and is used to create the revolve.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Although a centerline is not always needed in a sketch, a centerline helps
to establish symmetry. You can also use a centerline to apply a mirror
relation and to establish equal and symmetrical relations between sketch
entities.
Symmetry is an important tool to help create your axis-symmetric models
quicker.
Planes:
You can create planes in part or assembly documents. You can sketch on planes
with sketch tools such as the Line or Rectangle tool and create a section view
of a model. On some models, the plane you sketch on affects only the way the
model appears in a standard isometric view (3D). It does not affect the design
intent. With other models, selecting the correct initial plane on which to sketch
helps you create a more efficient model.

Choose a plane on which to sketch. The standard planes are front, top, and right
orientations. You can also add and position planes as needed. This example uses
the top plane.

Dimensions:
You can specify dimensions between entities such as lengths and radii. When
you change dimensions, the size and shape of the part changes. Depending on
how you dimension the part, you can preserve the design intent.

The software uses two types of dimensions: driving dimensions and driven
dimensions.

Driving Dimensions:
You create driving dimensions with the Dimension tool. Driving dimensions
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
change the size of the model when you change their values. For example, in the

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
faucet handle, you can change the height of the faucet handle from 40mm to
55mm. Note how the shape of the revolved part changes because the spline is
not dimensioned.

To maintain a uniform shape generated by the spline, you need to dimension the
spline.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Driven Dimensions:
Some dimensions associated with the model are driven. You can create driven,
or reference dimensions, for informational purposes using the Dimension tool.
The value of driven dimensions changes when you modify driving dimensions
or relations in the model. You cannot modify the values of driven dimensions
directly unless you convert them to driving dimensions.
In the faucet handle, if you dimension the total height as 40mm, the vertical
section below the spline as 7mm, and the spline segment as 25mm, the vertical
segment above the spline is calculated as 8mm (as shown by the driven
dimension).
You control design intent by where you place the driving dimensions and
relations. For example, if you dimension the total height as 40mm and create an
equal relation between the top and bottom vertical segments, the top segment
becomes 7mm. The 25mm vertical dimension conflicts with the other
dimensions and relations (because 40-7-7=26, not 25). Changing the 25mm
dimension to a driven dimension removes the conflict and shows that the spline
length must be 26mm.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Sketch Definitions:
Sketches can be fully defined, under defined, or over defined.
In fully defined sketches, all the lines and curves in the sketch, and their
positions, are described by dimensions or relations, or both. You do not have to
fully define sketches before you use them to create features. However, you
should fully define sketches to maintain your design intent. Fully defined
sketches appear in black.

By displaying the entities of the sketch that are under defined, you can
determine what dimensions or relations you need to add to fully define the
sketch. You can use the color cues to determine if a sketch is under defined.
Under defined sketches appear in blue. In addition to color cues, entities in
under defined sketches are not fixed within the sketch, so you can drag them.

Over defined sketches include redundant dimensions or relations that are in

conflict. You can delete over defined dimensions or relations, but you cannot
edit them.
Over defined sketches appear in yellow. This sketch is over defined because
both vertical lines of the rectangle are dimensioned. By definition, a rectangle
has two sets of equal sides. Therefore, only one 35mm dimension is necessary.
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Relations:
Relations establish geometric relationships such as equality and tangency
between sketch entities. For example, you can establish equality between the
two horizontal 100mm entities below. You can dimension each horizontal entity
individually, but by establishing an equal relation between the two horizontal
entities, you need to update only one dimension if the length changes.
The green symbols indicate that there is an equal relation between the horizontal
lines:

Relations are saved with the sketch. You can apply relations in the following
ways:
Interference: Some relations are created by inference. For example, as you
sketch the two horizontal entities to create the base extrude for the faucet base,
horizontal and parallel relations are created by inference.

Add Relations: You can also use the Add Relations tool. For example, to
create the faucet stems, you sketch a pair of arcs for each stem.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
To position the stems, you add a tangent relation between the outer arcs and the
top construction line horizontal (displayed as a broken line). For each stem, you
also add a concentric relation between the inner and outer arcs.

Sketch Complexity:
A simple sketch is easy to create and update, and it rebuilds quicker.
One way to simplify sketching is to apply relations as you sketch. You can also
take advantage of repetition and symmetry. For example, the faucet stems on the
faucet base include repeated sketched circles:

Here is one way you can create this sketch:

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Features:
Once you complete the sketch, you can create a 3D model using features such as
an extrude (the base of the faucet) or a revolve (the faucet handle).

Some sketch-based features are shapes such as bosses, cuts, and holes. Other
sketch-based features such as lofts and sweeps use a profile along a path.
Another type of feature is called an applied feature, which does not require a
sketch.
Applied features include fillets, chamfers, or shells. They are called “applied”
because they are applied to existing geometry using dimensions and other
characteristics to create the feature.
Typically, you create parts by including sketch-based features such as bosses
and holes. Then you add applied features.
It is possible to create a part without sketch-based features. For example, you
can import a body or use a derived sketch. The exercises in this document show
sketch-based features.

Assemblies:
You can combine multiple parts that fit together to create assemblies.
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
You integrate the parts in an assembly using Mates, such as Concentric and
Coincident. Mates define the allowable direction of movement of the
components. In the faucet assembly, the faucet base and handles have concentric
and coincident mates.

With tools such as Move Component or Rotate Component, you can see how
the parts in an assembly function in a 3D context.
To ensure that the assembly functions correctly, you can use assembly tools
such as Collision Detection. Collision Detection lets you find collisions with
other components when moving or rotating a component.

Drawings:
You create drawings from part or assembly models.
Drawings are available in multiple views such as standard 3 views and isometric
views (3D). You can import the dimensions from the model document and add
annotations such as datum target symbols.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Model Editing:
Use the SolidWorks FeatureManager design tree and the PropertyManager to
edit sketches, drawings, parts, or assemblies. You can also edit features and
sketches by selecting them directly from the graphics area. This visual approach
eliminates the need to know the name of the feature.

Edit Sketch: You can select a sketch in the FeatureManager design tree and edit
it. For example, you can edit sketch entities, change dimensions, view or delete
existing relations, add new relations between sketch entities, or change the size
of dimension displays. You can also select the feature to edit directly from the
graphics area.

Edit Features: Once you create a feature, you can change most of its values.
Use Edit Feature to display the appropriate PropertyManager. For example, if
you apply a Constant radius fillet to an edge, you display the Fillet Property
Manager where you can change the radius. You can also edit dimensions by
double- clicking the feature or sketch in the graphics area to show the
dimensions and then change them in place.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Hide & Show: With certain geometry such as multiple surface bodies in a
single model, you can hide or show one or more surface bodies. You can hide
and show sketches, planes, and axes in all documents, and views, lines, and
components in drawings.
Suppress & Surpass: You can select any feature from the FeatureManager
design tree and suppress the feature to view the model without that feature.
When a feature is suppressed, it is temporarily removed from the model (but not
deleted). The feature disappears from the model view. You can then unsuppress

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
the feature to display the model in its original state. You can suppress and
unsuppress components in assemblies as well
Rollback: When you are working on a model with multiple features, you can
roll the FeatureManager design tree back to a prior state. Moving the rollback
bar displays all features in the model up to the rollback state, until you revert the
FeatureManager design tree back to its original state. Rollback is useful for
inserting features before other features, speeding up time to rebuild a model
while editing it, or learning how a model was built.

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Step-by-Step of Sketching, Modeling & Assembling

Er. Zaki Call: For CAD Training &

Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects
Er. Zaki Call: For CAD Training &
Anwer 7979925756 Projects