105mm

1.Preparation 2.SIM card insertion 3.Adaptor 4.Access to the internet

1.Valid SIM card Align with and insert the micro-SIM card flatly to the card slot. Otherwise it Connect the adapter to the external power supply, then connect to your 1.Check the defaulted information on the device label to obtain the SSID and
could be failed to insert smoothly. device. Press the power switch, your device will power on and automatically WiFi. Select the correct SSID and input the correct WLAN KEY as wifi Technical requirement:
connect to the Internet password on your mobile device to connect to WiFi and then access the finished size: 105*148mm
Internet unfold size: 525*148mm; tolerance: +/-1mm
material: 80g book paper
ZLT X21 This device is suitable for Micro-SIM card only. color: single black printing on the front and back
Thank you for choosing our 5G wireless data terminal products. Please read 2.Check the device label to get the defaulted information the picture below folding pattern: zigzag folding
this manual carefully and keep it for backup after reading it. ZLT X21 is a is only for the reference XXXXXXXX
the red dotted line is the folding line, no need to print it
high-performance 5G indoor data terminal that supports NR(SA), converts XXXXXXXX

cellular network data into Wi-Fi and wired network port data, supports 4 gigabit
LAN ports, and supports 2.4G+5G dual-band Wi-Fi hotspot (AP). It is suitable for
home or business scenarios that require rapid deployment of communication
networks and Wi-Fi hotspots.
技术要求
148mm
Main technical indicators of products
1 2 3 4 成品尺寸：105*148mm;
● Operating temperature : 0 ~40
● Relative humidity :5%~95% 2.Use the RJ45 standard network cable to connect to the computer through 5.Device settings 6.WPS function 7.Indicators and interfaces 展开尺寸：525*148mm；公差：+/-1mm
● Power: input AC 100 V~240 V,50Hz~60 Hz the LAN port, and then access the Internet
Output DC 12V/2A.
● Size:117 mm *117mm *180mm
1.You can view or modify device Settings by logging in to the device website.
*Check the device label to obtain the IP address, user name, and password
1.Long press the WPS button for three
seconds and the WiFi light flashes to enter
材质：80g书纸
● Weight: 580g
● Uplink and downlink peak rate: 5G DL 2Gbps, UL 1Gbps (Theoretical
of the default device management website
*Open a browser on the PC, input the IP address of the device management
the WPS mode.
2.Enable WPS on your mobile device 颜色：正反两面单黑印刷
website to click in. (You are advised to use either of the following browsers to (remark: only available on the mobile 1 2 3

折叠方式：风琴折
4 5 6 7
value and actual rate are subject to operator configuration) 8 9
log in to the device configuration page. For example:●IE 7.0●Firefox 3.0● devices with WPS function.)
Safari 4.0●Opera10.0●Chrome10.0 or better version 3.Follow the system prompts on the mobile 10

红色虚线为折叠线不用印刷
12
11
*Enter the user name and password and click “Login”. device to establish a connection with the
*On the device configuration management page, you can change the SSID, device
WiFi password, and other information. 4.WPS is automatically turned off after two 1.Power LED light on the device operates.
*You can also change the password on the system Settings page. minutes. light off the device closes.
2.WiFi light on continually Working properly

5 6 7 8

light flashes WPS function starts 11.LAN port Able to connect to the Wide Area Network 8.Internet Related Problems Set your computer's network configuration as “automatically obtain an IP 9.Warning
light off WiFi or power off 12.WPS button: long press it to connect the wifi without encryption. address”
1.Possible problems 1.Some electronic equipment may be vulnerable to electromagnetic interfer-
3.4G LTE indicator The light is usually off. 2.Other problems
Unable to access to the internet ence, it should be far away from speakers, television and other electronic
4.5G NR indicator light on 5G internet mode on(5G only) The device can be used for SA network mode(5G) for phillipines 1.If the signal indicator is off or red, it indicates that the signal is poorly
solution equipment when used.
light off 5G internet mode off received. Move the device to a nearby window or another open place
Check your equipment Settings 2. It should be 20cm away from the equipment when used
5.Signal value indicator Red poor 2.Incorrect password: After you change the password and forget the
Wait 2 - 3 minutes until the device initialization is complete 3.Do not disassemble the device at will
Yellow normal password, hold down the seven-second reset button to restore the device to
Check whether a valid SIM card is inserted 4.Do not place the device in high temperature or outdoor sunshine environ-
Green good factory Settings
Check the signal indicator. ment.
6.Power button press Power on
low speed of network 5.The device is non waterproof. Please prevent the device from touching
up-spring power off
solution water. Do not soak or clean the device in water
7.Adapter interface connect the external power supply.
Check the strength of signal 6.Please do not give the power adapter to the child as a toy
8.SIM card slot Align with and insert the SIM card flatly to the slot.
Check the network mode 7.Please place the equipment in an appropriate place to work
9.Type-c interface To download the software. Please do not use this port
Unable to access to the device management website 8.Do not place external objects on the top of the device to prevent heat
at will
solution dissipation caused by blocked ventilation holes
10.Reset button long press for 7 seconds to restore to factory settings.
Check the device label and use the correct IP address 9.When the device is powered on, please do not insert or remove the SIM

9 10 11 12 13

card at will to avoid damaging the SIM card 11.Description of the content status of harmful PCB X O O O O O 12.Warranty and Commitment Warranty card
substances in the product Power adapter X O O O O O Dear Customer: Information for Users filling in

封面
User Name
10.Cleaning & Maintenance 1. Name and content of toxic and harmful substances or Antenna O O O O O O We promise to carry out a one-year quality guarantee for this product. The
Telephone
elements in the product The O: indicates that the content of the toxic and harmful substances in all homogeneous materials warranty card should be properly kept by the user. If lost, it will not be
1.Before cleaning the device, please turn off the device and use an anti-static User Address
Toxic, harmful substances or elements of the component is below the limit specified in the SJ/T11363-2006 standard. replaced. In case of failure of the product caused by non-human reasons, the
cloth to clean the device. Do not use chemical or abrasive cleaners, since Part Name
Date Of

Pb Hg Cd Cr (VI) PBB PBDE The X indicates that the content of the toxic and harmful substance in at least one homogeneous user can go to the designated repair point for free within the warranty period Purchase
these may damage the plastic shell
material of the component exceeds the limit specified in the SJ/T11363-2006 standard. with the warranty card and the purchase invoice marked with the product Model
2.The operating temperature of the device is 0 ° C - 40 ° C Body shell O O O O O O IMEI
Note: the components of this product containing toxic substances or elements cannot be completely number.
3.Avoid using the device during thunderstorms and remove the power Alloy Warranty Records
replaced by toxic and harmful substances or elements due to the global level of technological If the warranty card does not match the serial number of the product, the
adapter from the socket. components O O O O O O Mainten
development, but toxic and harmful substances only occupy the extremely small content of this warranty card has been altered, or the product is not within the scope of the Date ance
Maintenance
User Signature
Signature
inside body product. And in line with the National Electronic Information products pollution control measures free warranty but can be repaired, the company can provide paid mainte- Content

Cable and long-term use will not harm the human body, please feel free to use. nance services.
X O O O O O
components Product implementation standard: YD/T2583.14-2013; YD/T2583.18-2019; GB4943.1-2011;

14 15 16 17 18