0% found this document useful (0 votes)
63 views2 pages

Data Sheet FURANE

Uploaded by

younes.smarting
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
63 views2 pages

Data Sheet FURANE

Uploaded by

younes.smarting
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Kothari's KOTHARI CORROSION CONTROLLERS

FACTORY : PLOT NO.: 63, G. V. M.M.A. ESTATE, ODHAV, AHMEDABAD - 382 415. INDIA.
PHONE : +91 - 79 - 22902525, 22902626 MOBILE NO.: 98250 06626,
WEBSITE : www.acidprooftiles.com EMAIL : [email protected], [email protected]

: FURANE :

● INTRODUCTION :

FURANE is a two-part chemical setting Furfural Alcohol base Resin-Mortar used for
bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very
wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by
temperature up to 170 C. FURANE"C" a 100 % carbon filled mortar is available where
resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.

●● AREA OF APPLICATION :

FURANE is used for acid resistant bricks and tiles lining where maximum chemical
resistance is required e.g. dyestuff, rayon, steel, thermal power stations, fertilizers, petro-
chemicals, food-pharmaceuticals industries on locations like floors, drains, tanks, reaction
& storage vessels, effluent treatment plants etc.

●● PHYSICAL PROPERTIES :

Color Black

Mix Ratio by wt. Sol to Powder 1.3

Compressive Strength Kg/Cm2 350

Flexural Strength Kg/Cm2 75

Bond Strength Kg/Cm2 10

Water Absorption Kg/Cm2 1%by wt

Max. Temp. 170 C

Setting Time 6 - 10 Hrs.

● METHOD OF APPLICATION :

FURANE is prepared by mixing solution & powder to form a workable mortar. The
recommended ratio of mixing is 1 part solution to 3 parts powder by wt. The ratio will vary
depending upon ambient temperature and working conditions. Use clean, dry mixing pan.
Place appropriate quantity of solution in mix pan, and add powder slowly, mixing thoroughly
until completely dispersed. Do not mix more material, then can be used within 20-30 minutes.
Kothari's KOTHARI CORROSION CONTROLLERS
FACTORY : PLOT NO.: 63, G. V. M.M.A. ESTATE, ODHAV, AHMEDABAD - 382 415. INDIA.
PHONE : +91 - 79 - 22902525, 22902626 MOBILE NO.: 98250 06626,
WEBSITE : www.acidprooftiles.com EMAIL : [email protected], [email protected]

: FURANE :

● APPLICATION :

Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks
or tiles with mixed mortar ensuring uniform coverage, with a slight more in the center so no air
pockets are formed while its installation. When using as only jointing mortar, it is essential that
FURANE is filled to the full depth of the joint. During and after completion of the application,
the area must be kept dry and free from any other materials, which can affect setting and
curing of FURANE.

● CHEMICAL RESISTANCE :

FURANE is recommended to use against very wide range of acids, alkalis, solvents, salts,
oils and fats. However FURNAE is not recommended to use against HF, fluoride salts, and
strong hot alkalis. For these conditions, FURANE"C" 100 % carbon filled mortar is available.
Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and
other oxidizing agents.

● STORAGE & SHELF LIFE :

Always keep solution & powder in cool dry place in sealed container and bag, away from
direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year powder: 3-4
months.

● PACKING :

25 Kg., 200 Kg. & 240 Kg. sound quality M.S drums., & Powder : 50 Kg. in LDPE + HDPE bags.

● HEALTH & SAFETY :


It is advisable to wear protective wears at the time of use of FURANE and all other our
products. In case of contact with eyes and skin, wash with plenty of water and consult a
doctor. This information, given above in good faith, is based on results gained from
experience and tests. However, all recommendations or suggestions are made without
guarantee since the conditions of use is beyond our control.

: WARNING :
# The Information about our Acid Resisting Products are given in good Faith And based on
our Experience and Tests. However, all Recommendations or Suggestions are made without
Guarantee Since the Conditions of Use is beyond our Control.
# “ACID PROOF” is Regd. Trade-Mark of “KOTHARI CORROSION CONTROLLERS” in India.
Using the Word without Official permission is Liable for Civil and/or Criminal Prosecution.

You might also like