PL Nl2500 Parts

PARTS LIST
Applicable Model
NL2500
WARNING Parts List is a reference material prepared for the purpose of "ordering a
part" and it is not intended for giving assembling instructions. Therefore,
do not assemble or disassemble machine units referring to the Parts List.
Before starting operation, maintenance, or programming, carefully read
the manuals supplied by Mori Seiki, the NC unit manufacturer, and
equipment manufacturers so that you fully understand the information
they contain.
Keep the manuals carefully so that they will not be lost.
PL-CENL2500-23
• The contents of this parts list are subject to change without notice due to
improvements to the machine or in order to improve the parts list. Conse-
quently, please bear in mind that there may be slight discrepancies
between the contents of the parts list and the actual machine. Changes to
the parts list are made in revised editions which are distinguished from
each other by updating the parts list number.
• Should you discover any discrepancies between the parts list and the
actual machine, refer to the parts list specific to your machine, which can
be found in the maintenance drawing file inside the electrical cabinet.
If any part of the parts list is unclear, please contact Mori Seiki and clarify
the relevant points before using the machine. Mori Seiki will not be liable
for any damage that occurs as a direct or indirect consequence of using
the machine without clarifying these points.
• All rights reserved: reproduction of this parts list in any form, in whole or in
part, is not permitted without the written consent of Mori Seiki.
The product shipped to you (the machine and accessory equip-

ment) has been manufactured in accordance with the laws and
standards that prevail in the relevant country or region. Conse-
quently it cannot be exported, sold, or relocated, to a destination in
a country with different laws or standards.
The export of this product is subject to an authorization from the
government of the exporting country.
Check with the government agency for authorization.
990730P
Machine Information
Description of machine: NC lathe
Model name:
Machine serial No.:
Manufacturing date:
Representative:
Business hours: 8:30 - 17:30

PREFACE
This document gives the parts list which are necessary for ordering a part. Please select the
drawings that match your machine’s specification.
This parts list has been compiled to include the standard component parts of the machine. The
parts actually used to configure the machine delivered to you may differ from those in this parts list
because of the specifications selected and other factors. When ordering parts, refer to the parts
list specific to your machine, which can be found in the maintenance drawing file inside the
electrical cabinet.
If the drawings necessary for ordering a part are not included in this document, please contact
Mori Seiki.
PARTS LIST
The drawings of assemblies such as headstock, turret, and covers. Please note that the
drawings presented in the parts lists may differ from the master drawings for some purposes.
If changing the parts becomes necessary, arrange all necessary parts following the procedure
stated in the HOW TO ORDER THE MACHINE PARTS before beginning maintenance.
WARNING When changing parts, be sure to use genuine parts specified by Mori
Seiki. Mori Seiki cannot accept responsibility for any trouble arising from
the use of parts not specified by Mori Seiki. Using parts that are not
specified will not only impair the performance of the machine; it will also
make the machine unsafe and could cause accidents involving serious
injuries or damage to the machine.
CONTENTS
CAUTION LABELS
HEADSTOCK
TURRET
TAILSTOCK
X-AXIS DRIVE
Y-AXIS DRIVE
Z-AXIS DRIVE
B-AXIS DRIVE
SADDLE
SPLASH GUARD
WORK UNLOADER
LOADER
COOLANT PIPE
COOLANT GUN
SPINDLE AIR BLOW
OPTION
-i-
CHUCK AND CYLINDER
AUTOMATIC DOOR
SLIDEWAY LUBRICATION OIL PIPE
STEADY REST
WORK PUSHER
APPENDIX: DETAIL OF UNIT COMPONENT

COOLANT PUMP
GRUNDFOS PUMPS K.K
CRK2-180/18 AMA-AUUV (E55193A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CRK2-180/13 AMA-AUUV (E55194A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
MTH2-60/6 A-W-A-AUUV (E55503G03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MTH2-60/3 A-W-A-AUUV (E55508F03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
KITAGAWA IRON WORKS CO., LTD.
M1330RC (K25116A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SS1881C21 (K20043A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MATSUMOTO MACHINE CO., LTD.
RNKP135-21-10 (K21203A02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FAN MOTOR
STYLE ELECTRONICS CO., LTD.
US18F22-MGW (E32907B01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
OIL MATIC
KANTO SEIKI CO., LTD.
KTCG-7.5A-HBNCE (U07257A02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
OILMIST UNIT
TANAKA IMPORT GROUP, LTD.
DC-S4 (U29163A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ONIKAZE Heavy Smoker OIL MIST COLLECTOR

AKAMATSU ELECTRIC MFG. CO., LTD.
HVS-150-EP/CE (U29040A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
-ii-
POWER CHUCK
HOWA MACHINERY, LTD.
H01MA10 A8-J (K13008A05) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
H01MA12 A8-J (K13128A05) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
H037M6 M-1379 (K12070A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
KITAGAWA IRON WORKS CO., LTD.
BB208A621 (K10031A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
BB210A821 (K10032A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
N-10A0821 (K02601A06) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
N-12A0821A (K15128A08) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
MATSUMOTO MACHINE CO., LTD.
HA6-10(2) (K10100A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
ROTATING HYDRAULIC CYLINDER

HOWA MACHINERY, LTD.
HH960C115 M-478 (K23621B02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
-iii-
CAUTION LABELS
CAUTION LABELS P-1
Standard
5
6
12
10
(Labels will be attached at different places depending on the model.)
(PL-CENL2500-20)
CAUTION LABELS P-2
Loader
<Right-side workstocker specification>
11
12
(PL-CENL2500-20)
CAUTION LABELS P-3
<Left-side workstocker specification>
12
(PL-CENL2500-20)
CAUTION LABELS P-4
No. Order No. Part Name Q'ty Remark No. Order No. Part Name Q'ty Remark
1 H60447 Caution label, chip conveyor 1 Japanese 5 H61030 Caution label, spindle speed 1 Finnish
H60438 Caution label, chip conveyor 1 English H61031 Caution label, spindle speed 1 Portuguese
H60407 Caution label, chip conveyor 1 German H61029 Caution label, spindle speed 1 Danish
H60517 Caution label, chip conveyor 1 French H61032 Caution label, spindle speed 1 Norwegian
H60526 Caution label, chip conveyor 1 Spanish H61033 Caution label, spindle speed 1 Slovene
H60429 Caution label, chip conveyor 1 Italian H61036 Caution label, spindle speed 1 Czech
H60839 Caution label, chip conveyor 1 Dutch H61034 Caution label, spindle speed 1 Hungarian
H60857 Caution label, chip conveyor 1 Chinese H61035 Caution label, spindle speed 1 Polish
H60554 Caution label, chip conveyor 1 Swedish 6 H60983 Caution label, rotary tool 1 Japanese
H60830 Caution label, chip conveyor 1 Finnish H60983 Caution label, rotary tool 1 English
H60848 Caution label, chip conveyor 1 Portuguese 7 H42654 Caution label, cocom 1 Japanese
H60544 Caution label, chip conveyor 1 Danish H42654 Caution label, cocom 1 English
H60669 Caution label, chip conveyor 1 Norwegian H42654 Caution label, cocom 1 German
H61158 Caution label, chip conveyor 1 Slovene H42654 Caution label, cocom 1 French
H61179 Caution label, chip conveyor 1 Czech H42654 Caution label, cocom 1 Spanish
H61200 Caution label, chip conveyor 1 Hungarian H42654 Caution label, cocom 1 Italian
H61210 Caution label, chip conveyor 1 Polish H42654 Caution label, cocom 1 Dutch
2 H60439 Caution label, safety precautions 1 Japanese H42654 Caution label, cocom 1 Chinese
H60430 Caution label, safety precautions 1 English H42654 Caution label, cocom 1 Swedish
H42655 Caution label, safety precautions 1 German H42654 Caution label, cocom 1 Finnish
H60448 Caution label, safety precautions 1 French H42654 Caution label, cocom 1 Portuguese
H60518 Caution label, safety precautions 1 Spanish H42654 Caution label, cocom 1 Danish
H60421 Caution label, safety precautions 1 Italian H42654 Caution label, cocom 1 Norwegian
H60831 Caution label, safety precautions 1 Dutch H61117 Caution label, cocom 1 Slovene
H60849 Caution label, safety precautions 1 Chinese H61117 Caution label, cocom 1 Czech
H60546 Caution label, safety precautions 1 Swedish H61117 Caution label, cocom 1 Hungarian
H60822 Caution label, safety precautions 1 Finnish H61117 Caution label, cocom 1 Polish
H60840 Caution label, safety precautions 1 Portuguese 8 H60981 Caution label, machine left side 1 Japanese
H60536 Caution label, safety precautions 1 Danish H61045 Caution label, machine left side 1 English
H60555 Caution label, safety precautions 1 Norwegian H61046 Caution label, machine left side 1 German
H61118 Caution label, safety precautions 1 Slovene H61047 Caution label, machine left side 1 French
H61171 Caution label, safety precautions 1 Czech H61049 Caution label, machine left side 1 Spanish
H61192 Caution label, safety precautions 1 Hungarian H61048 Caution label, machine left side 1 Italian
H61202 Caution label, safety precautions 1 Polish H61050 Caution label, machine left side 1 Dutch
3 H60982 Caution label, chuck clamping 1 Japanese H61051 Caution label, machine left side 1 Chinese
H61005 Caution label, chuck clamping 1 English H61052 Caution label, machine left side 1 Swedish
H61006 Caution label, chuck clamping 1 German H61054 Caution label, machine left side 1 Finnish
H61007 Caution label, chuck clamping 1 French H61055 Caution label, machine left side 1 Portuguese
H61009 Caution label, chuck clamping 1 Spanish H61053 Caution label, machine left side 1 Danish
H61008 Caution label, chuck clamping 1 Italian H61056 Caution label, machine left side 1 Norwegian
H61010 Caution label, chuck clamping 1 Dutch H61057 Caution label, machine left side 1 Slovene
H61011 Caution label, chuck clamping 1 Chinese H61060 Caution label, machine left side 1 Czech
H61012 Caution label, chuck clamping 1 Swedish H61058 Caution label, machine left side 1 Hungarian
H61014 Caution label, chuck clamping 1 Finnish H61059 Caution label, machine left side 1 Polish
H61015 Caution label, chuck clamping 1 Portuguese 9 H60440 Caution label, electrical cabinet 1 Japanese
H61013 Caution label, chuck clamping 1 Danish H60431 Caution label, electrical cabinet 1 English
H61016 Caution label, chuck clamping 1 Norwegian H42656 Caution label, electrical cabinet 1 German
H61017 Caution label, chuck clamping 1 Slovene H60449 Caution label, electrical cabinet 1 French
H61020 Caution label, chuck clamping 1 Czech H60519 Caution label, electrical cabinet 1 Spanish
H61018 Caution label, chuck clamping 1 Hungarian H60422 Caution label, electrical cabinet 1 Italian
H61019 Caution label, chuck clamping 1 Polish H60832 Caution label, electrical cabinet 1 Dutch
4 H60441 Caution label, front door 1 Japanese H60850 Caution label, electrical cabinet 1 Chinese
H60432 Caution label, front door 1 English H60547 Caution label, electrical cabinet 1 Swedish
H60401 Caution label, front door 1 German H60823 Caution label, electrical cabinet 1 Finnish
H60450 Caution label, front door 1 French H60841 Caution label, electrical cabinet 1 Portuguese
H60520 Caution label, front door 1 Spanish H60537 Caution label, electrical cabinet 1 Danish
H60423 Caution label, front door 1 Italian H60556 Caution label, electrical cabinet 1 Norwegian
H60833 Caution label, front door 1 Dutch H61119 Caution label, electrical cabinet 1 Slovene
H60851 Caution label, front door 1 Chinese H61172 Caution label, electrical cabinet 1 Czech
H60548 Caution label, front door 1 Swedish H61193 Caution label, electrical cabinet 1 Hungarian
H60824 Caution label, front door 1 Finnish H61203 Caution label, electrical cabinet 1 Polish
H60842 Caution label, front door 1 Portuguese 10 H60446 Caution label, machine rear side 1 Japanese
H60538 Caution label, front door 1 Danish H60437 Caution label, machine rear side 1 English
H60557 Caution label, front door 1 Norwegian H60406 Caution label, machine rear side 1 German
H61120 Caution label, front door 1 Slovene H60516 Caution label, machine rear side 1 French
H61173 Caution label, front door 1 Czech H60525 Caution label, machine rear side 1 Spanish
H61194 Caution label, front door 1 Hungarian H60428 Caution label, machine rear side 1 Italian
H61204 Caution label, front door 1 Polish H60838 Caution label, machine rear side 1 Dutch
5 H60980 Caution label, spindle speed 1 Japanese H60856 Caution label, machine rear side 1 Chinese
H61021 Caution label, spindle speed 1 English H60553 Caution label, machine rear side 1 Swedish
H61022 Caution label, spindle speed 1 German H60829 Caution label, machine rear side 1 Finnish
H61023 Caution label, spindle speed 1 French H60847 Caution label, machine rear side 1 Portuguese
H61025 Caution label, spindle speed 1 Spanish H60543 Caution label, machine rear side 1 Danish
H61024 Caution label, spindle speed 1 Italian H60668 Caution label, machine rear side 1 Norwegian
H61026 Caution label, spindle speed 1 Dutch H61157 Caution label, machine rear side 1 Slovene
H61027 Caution label, spindle speed 1 Chinese H61178 Caution label, machine rear side 1 Czech
H61028 Caution label, spindle speed 1 Swedish H61199 Caution label, machine rear side 1 Hungarian
H61209 Caution label, machine rear side 1 Polish
H61231 Caution label, machine rear side 1 Turkish
(PL-CENL2500-20)
CAUTION LABELS P-5
No. Order No. Part Name Q'ty Remark No. Order No. Part Name Q'ty Remark
11 H60444 Caution label, door interlock 1 Japanese 12 H61523 Machine relocation detection name plate 1 Japanese
H60435 Caution label, door interlock 1 English H61524 Machine relocation detection name plate 1 English
H60404 Caution label, door interlock 1 German H61563 Machine relocation detection name plate 1 German
H60514 Caution label, door interlock 1 French H61573 Machine relocation detection name plate 1 French
H60523 Caution label, door interlock 1 Spanish H61576 Machine relocation detection name plate 1 Spanish
H60426 Caution label, door interlock 1 Italian H61575 Machine relocation detection name plate 1 Italian
H60836 Caution label, door interlock 1 Dutch H61569 Machine relocation detection name plate 1 Dutch
H60854 Caution label, door interlock 1 Chinese H61577 Machine relocation detection name plate 1 Chinese
H60551 Caution label, door interlock 1 Swedish H61572 Machine relocation detection name plate 1 Swedish
H60827 Caution label, door interlock 1 Finnish H61568 Machine relocation detection name plate 1 Finnish
H60845 Caution label, door interlock 1 Portuguese H61574 Machine relocation detection name plate 1 Portuguese
H60541 Caution label, door interlock 1 Danish H61570 Machine relocation detection name plate 1 Danish
H60560 Caution label, door interlock 1 Norwegian H61571 Machine relocation detection name plate 1 Norwegian
H61123 Caution label, door interlock 1 Slovene H61564 Machine relocation detection name plate 1 Slovenian
H61176 Caution label, door interlock 1 Czech H61567 Machine relocation detection name plate 1 Czech
H61197 Caution label, door interlock 1 Hungarian H61565 Machine relocation detection name plate 1 Hungarian
H61207 Caution label, door interlock 1 Polish H61566 Machine relocation detection name plate 1 Polish
H61229 Caution label, door interlock 1 Turkish H61578 Machine relocation detection name plate 1 Turkish
(PL-CENL2500-20)
HEADSTOCK
HEADSTOCK P-1
38
39 36
50
54
30
59 FANUC specification
6 MITSUBISHI specification 55
40
30
58 FANUC specification
4 7 MITSUBISHI specification
63
∗ 1 ∗ 2 ∗ 3 5 8 9 10 11 127 13
14
∗ 37 15
MITSUBISHI specification 36
FANUC specification 60
16
35
17
34 18
33
19
20
∗ 31
Turning specification 52
21
30
29 26 22
28 27 25 24 23
29 30
SL3017A01
30
F40011A 1
15 F44140A 1
F44141A 1
13
F57629A 1
41 F58330B 1
56 F58332B 1
42 30 N16006A 1
43 53 R00125B 1
12 R37153B 1
57 R38111A
44 1
S03371A 1
S06054A 1
45 Y62048A 1
Y80087A 1
NOTE (1) ∗: MC, Y specification

(2) Service set No.: SL3017
(Q05249006 1/2 2006.07.06)
(PL-CENL2500-15)
HEADSTOCK P-2
NO. ORDER NO. PARTS NAME Q'ty NO. ORDER NO. PARTS NAME Q'ty
1 Y05040A HEXAGON SOCKET HEAD CAP BOLT M14*40 2 30 Y00312A HEXAGON SOCKET HEAD CAP BOLT M5*12 13
2 B76440B ANGLE 1 31 F67447A DISK 1
3 Y03040A HEXAGON SOCKET HEAD CAP BOLT M10*40 2 32 F57628C NUT 1
4 F44141A COLLAR 1 33 N73117A LOCK NUT 1
5 W06315A O RING P-315 1 34 N73108A LOCK NUT 1
6 R38111A ROTOR WITH SLEEVE 1 35 H82750E LID 1
7 R37151B STATOR FIXING FLANGE 1 36 F58332B HOUJING 1
8 E40794A BUILT-IN STATOR SJ-2B6716K 1 37 U20083A DISK BRAKE PC-450Y-106 1
9 R37153C HOUSING 1 38 Y01020A HEXAGON SOCKET HEAD CAP BOLT M6*20 4
10 W07240A O RING G-240 1 39 H82751C LID 1
11 W06335A O RING P-335 1 40 Y02050A HEXAGON SOCKET HEAD CAP BOLT M8*50 6
12 H71334B COVER 1 41 X31771A FLAT RUBBER 1
13 F58330C FLANGE 1 42 H33819A CLAMPING PLATE 1
14 Y01030A HEXAGON SOCKET HEAD CAP BOLT M6*30 4 43 X10282B PACKING 1
15 F45220A FLANGE 1 44 H34391B LID 1
16 W07200A O RING G-200 1 45 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 10
17 R00125B SPINDLE 1 50 P30601A PLUG 1/4 1
18 S03371A ANGULAR CONTACT BALL BEARING 1 52 F23033A CYLINDER ADAPTER 1
7028UADEX1T1BDBT/G9U 53 H58226A COVER 1
19 W07240A O RING G-240 1 54 N16006A SET SCREW 1
20 Y02040A HEXAGON SOCKET HEAD CAP BOLT M8*40 10 55 F40011A PIN 1
21 Y03030A HEXAGON SOCKET HEAD CAP BOLT M10*30 6 56 P30600A PLUG 1/8 2
22 A00270C HEADSTOCK 1 57 U40816A SILENCER EBKY-E9003Z 3
23 F44140A COLLAR 1 58 R37164B FLANGE 1
24 Y62048A LOCK NUT KMTA 28 1 59 R38116A ROTOR WITH SLEEVE 1
25 Y80087A SPAN RING PL 140*182 SL-TK 1 60 F58355A HOUSING 1
26 S06028A NEEDLE ROLLER BEARING L115-1CC0P5YU26 1 61 B59101A MOUNTING PLATE 1
27 F57629A FLANGE 1 62 F57985A NUT 1
28 W07023A O RING GS230 2 63 H71418A COVER 1
29 E53014A BUILT-IN SENSOR TS1860N1574+MU1450N5 1 64 SL3017A SPINDLE UNIT_NL2500_MITSUBISHI_NONE MILL 0
(Q05249006 1/2)
(PL-CENL2500-15)
HEADSTOCK P-3
NO. ORDER NO. PARTS NAME Q'ty

1 H58226A COVER 1
2 Y00312A HEXAGON SOCKET HEAD CAP BOLT M5*12 8
3 F45220A FLANGE 1
4 H71334B COVER 1
5 N16006A SET SCREW 1
6 F40011A PIN 1
8 B76440B ANGLE 2
9 U20083A DISK BRAKE PC-450Y-106 2
10 P31073A HOSE JOINT 1009-0204 1
11 P32443A NIPPLE SRN02-010J 1
12 P31012A HOSE JOINT 1036 6 1
13 P32370A T TYPE CONNECTOR STA02-000J 1
14 P32312A NIPPLE SRN03-020J 1
15 P32341A JOINT SFC03-000J 1
16 P31041A HOSE JOINT 1009-0608 1
17 P30601A PLUG 1/4 2
18 P31011A HOSE JOINT 103419 1
19 P30604A PLUG 3/4 6
20 F67447A DISK 1
21 R00125B SPINDLE 1
23 X31771A FLAT RUBBER 1
24 H33819A CLAMPING PLATE 1
25 H82751C LID 1
26 P34338A HOSE SET 1
27 X10282B PACKING 1
28 H34391B LID 1
29 E71143A CABLE GLAND EM3BG3642-9.5*6P 1
30 E71162A CABLE GLAND E2BG0612 1
31 E71145A CABLE GLAND EMBG3.3X2P12 1
32 A00270C HEADSTOCK 1
33 H82750E LID 1
39 E71227A CABLE GLAND EM3BG3642-10*6P 1
40 H71418A COVER 1
(Q05249006 2/2)
(PL-CENL2500-15)
HEADSTOCK P-4
7 ∗ 8 ∗ 9 ∗ 10 ∗ 11 ∗ 12 ∗
13 ∗
18
14 ∗
6
5
15 ∗
4 33
16 ∗ 17
3
17
18
19
1
40 19
∗ 9
32 ∗ 20
Turning specification 21
22
23
24
26
25
26
27 28 29 MITSUBISHI 31 MITSUBISHI specification
specification
39 FANUC 30 FANUC specification
specification
NOTE
∗: MC, Y specification
(Q05249006 2/2 2006.07.06)
(PL-CENL2500-15)
HEADSTOCK P-5
<Headstock 2>
46
42
22 21 36
44
43 45
# 49
4 5 6 7 8 9
3 10 11 ∗ 12 13 14
15
47
16
34 35 36 36 37
1 17
38
2
18 20
31
33 19
41
14
40
32 39
30 25 24 23 22 21 20
29 28 27
26 ∗
48 #
NOTE (1) ∗: 6000 min−1
(2) #: 8000 min−1

(Q05251004 1/2 2006.08.03)
(PL-CENL2500-16)
HEADSTOCK P-6

1 R00128C SUB SPINDLE 1
3 W07135A O RING G-135 1
5 A00277B HEADSTOCK 1
6 F44153B COLLAR 1
7 Y62051A LOCK NUT FKNA 85*2.0 1
8 E40796A BUILT-IN STATOR SJ-2B4340-S01 1
9 R38112A ROTOR WITH SLEEVE 1
10 W07200A O RING G-200 1
11 F44154A COLLAR 1
12 S06025A NEEDLE ROLLER BEARING N1013BTKRCC1P4U26 1
13 E53046A BUILT-IN SENSOR TS1860N1304 1
14 H82753B COVER 1
15 F57652B NUT 1
16 F67449A DISK 1
17 N72036B LOCK NUT 1
18 N72047A LOCK NUT 1
20 H82752B COVER 1
21 F57651A FLANGE 1
22 F58338A HOUSING 1
23 Y80094B SPAN RING PL070*080EF-TK 1
24 R37160B STATOR FIXING FLANGE 1
25 R37165B HOUSING 1
26 S03496A ANGULAR CONTACT BALL BEARING 85BER10STYNDBLP4YU26 1
27 W07021A O RING G-205 1
28 W07160A O RING G-160 1
30 H58234B COVER 1
31 W07125A O RING G-125 1
32 F58339C FLANGE 1
33 F58340C FLANGE 1
34 H47217A MOUNTING PLATE 1
40 H34389B COVER 1
42 F40023A PIN 1
43 N16044A FLAT FILLISTER HEAD SCREW 1
44 P30600A PLUG 1/8 1
45 U40634A SILENCER SL-6A-FL237179 1
48 S03338A ANGULAR CONTACT BALL BEARING 85BER10HTYNDBELP4YU2 1
49 S06159A CYLINDRICAL ROLLER BEARING N1013RXTPKRCCOP4YU26 1
(Q05251004 1/2)
(PL-CENL2500-16)
HEADSTOCK P-7
∗SL1019A02 #SL1020A02
11 10 12 12 13 14 15 16 F40023A 1 F40023A 1
8 F44153B 1 F44153B 1
F44154A 1 F44154A 1
F57651A 1 F57651A 1
17
F58338A 1 F58338A 1
F58339C 1 F58339C 1
10 N16044A 1 N16044A 1
18
R00128C 1 R00128C 1
R37165B 1 R37165B 1
9 R38112A 1 R38112A 1
S03496A 1 S03338A 1
19 S06025A 1 S06159A 1
14 13 8 15 Y62051A 1 Y62051A 1
8
Y80094B 1 Y80094B 1
20 W07125A 1 W07125A 1
H58234B 1 H58234B 1
7 16 F58340C 1 F58340C 1
21
6
22 25
5 23
4 19
20
2
26
1
24 27
FANUC specification 31 24
NOTE (1) ∗: 6000 min−1

Service set No.: SL1019
(2) #: 8000 min−1

(Q05251004 2/2 2006.08.03)
(PL-CENL2500-16)
HEADSTOCK P-8

2 H58234B COVER 1
4 H56864A COVER 1
5 F58340C FLANGE 1
6 F40023A PIN 1
10 P31011A HOSE JOINT 103419 1
11 P31042A HOSE JOINT 1034-0608 1
12 P31010A HOSE JOINT 1034 12 2
13 B47317C ANGLE 1
14 P31198A HOSE JOINT 1034-0204 1
15 H82753B COVER 1
17 P31015A HOSE JOINT 1036 12 2
19 F67449A DISK 1
20 H82752B COVER 1
23 U40816A SILENCER EBKY-E9003Z 1
27 H34389B COVER 1
30 E71162A CABLE GLAND E2BG0612 1
32 SL1019A SUBSPINDLE UNIT_NL1500_2500_MITUSBISHI_6 0
33 SL1020A SUBSPINDLE UNIT_NL1500_2500_MITSUBISHI_8 0
(Q05251004 2/2)
(PL-CENL2500-16)
HEADSTOCK P-9
<73-mm dia. through hole sub-spindle specifications>
42
36
6 12
10 17
19 25
48 47 2 5 6 7 8 9 12 11 14 13 16 18 20 23 24 26
∗SL2025A02
21 1 R00171B 1
44 45 15 4 S03373A 1
46 27 6 R37236A 1
43 8 F44142A 1
10 Y62047A 1
15 R38145A 1
16 Y80085A 1
17 S06163A 1
32 F83311A 1
33 R37235B 1
34 F44144A 1
38 F58329C 1
1
47 F40001A 1
48 N16040A 1
40
29
39
33 18 21
22
37
31
38 32
4
34 36 35 33
41
22
36 11
NOTE
(Q07028004 1/2 2006.12.13)
(PL-CENL2500-20)
HEADSTOCK P-10

1 R00171B SPINDLE 1
3 W07190A O RING G-190 1
4 S03373A ANGULAR CONTACT BALL BEARING 120BER10STYNDBELP4D+ 1
6 R37236A HOUSING 1
7 W07016A O RING G-225 1
8 F44142A COLLAR 1
9 W07220A O RING G-220 2
10 Y62047A LOCK NUT KMTA 24 1
11 R37238A STATOR FIXING FLANGE 1
12 F83312A FLANGE 1
13 E40907A BUILT-IN STATOR SJ-2B6719 1
14 W07300A O RING G-300 1
15 R38145A ROTOR WITH SLEEVE 1
16 Y80085A SPAN RING SCE300S 110*124 1
17 S06163A CYLINDRICAL ROLLER BEARING N1020MRKRCC0P5YU26 1
18 W07170A O RING G-170 1
19 W07046A O RING G320 1
20 F55401A FLANGE 1
21 F58427A REAR SLEEVE 1
24 H20097A REAR COVER 1
26 N73056A NUT 1
27 F67527A DISK 1
30 Y29253A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M5*12(SILVER2) 5
32 F83311A FLANGE 1
33 R37235B HOUSING 1
34 F44144A COLLAR 1
35 W07290A O RING G-290 1
38 F58329C FLANGE 1
39 F45221A FLANGE 1
40 W07155A O RING G-155 1
41 U40564A SILENCER EBKX-R3004 1
42 P30601A PLUG 1/4 4
44 B47570A ANGLE 1
47 F40001A PIN 1
48 N16040A BOLT 1
(Q07028004 1/2)
(PL-CENL2500-20)
HEADSTOCK P-11
1 2 3 12 4
13
9
11 10
(Q07028004 2/2 2006.12.13)
(PL-CENL2500-20)
HEADSTOCK P-12

1 A00358A HEADSTOCK 1
2 B47570B ANGLE 1
5 F67527A DISK 1
7 H33829A LID 1
10 B41984A PLATE 1
11 X10709A PACKING 1
(Q07028004 2/2)
(PL-CENL2500-20)
TURRET
TURRET P-1
<Turning specification>
47 56 3 71 1 72 66 65 67 28
1 12 1 1 1 1 2 1 1 1
29
9
12 HC352
HC452
54
1 69
1
53
1
0.3
44
3
46
16
43
1
42
2
58
1
57 52 51 40 39 61 20 59 21 19 18 60 49 13 2 17 34 36 63 35 37
12 8 1 1 1 1 1 1 1 1 1 1 12 1 7 9 1 2 1 1 1
NOTE
Balloon top number: Parts list number
Balloon bottom number: Quantity
(Q00653001 1/3 2004.05.25)
(PL-CENL2500-00)
TURRET P-2
54 39 46 43 53 51 20 48 49 24 1 68
1 1 16 1 1 1 1 1 12 1 1 1
23
4
22
1
91
1
86
1
78
1
80
3
79
1
47 57 56 11 89 45 90 17 88 26 27 74 76 87 83 84 77 82 75 73 85
1 12 12 26 1 1 1 9 1 4 8 1 1 2 1 1 1 1 1 1 1
NOTE
(Q00653001 2/3 2004.05.25)
(PL-CENL2500-00)
TURRET P-3
7 5 10 2 28 2 86 45 90 30 47 57 56
2 1 1 7 1 7 1 1 1 4 1 12 12
29
8 9
2 73
23 1
4
33
2
79
79 1
6 1
1
22
12 1
2 80
3
73
1
32
1 4
32 1
80 1
3
12
75
2
1
86
1
5
31 1
1
7
2
90
1
8
1 2
1
45 10
1 1
9
1
6
1
29 28 67 27 26 1
58 54 55 47 57 56 11 27
9 1 1 8 4 1
1 1 6 1 12 12 26 8
NOTE
(Q00653001 3/3 2004.05.25)
(PL-CENL2500-00)
TURRET P-4
1 A05148 TOOL POST 1 46 Y00316 HEXAGON SOCKET HEAD CAP BOLT M5*16 16
2 P30602 PLUG 3/8 7 47 B01089 TURRET HEAD 1
3 P30604 PLUG 3/4 1 48 G40184 COUPLING GEAR CONCAVE TEETH 1
4 P32311 NIPPLE 3/8 1 49 Y03060 HEXAGON SOCKET HEAD CAP BOLT M10*60 12
5 P32371 T TYPE CONNECTOR 3/8 1 50* Y57620 STRAIGHT PIN φ5*20 1
6 P32517 VALVE 3/8 1 51 F83001 FLANGE 1
7 P31002 HOSE JOINT 2 52 Y02030 HEXAGON SOCKET HEAD CAP BOLT M8*30 8
8 HOSE JOINT 1005-9(HIGH) 2 53 F55275 FLANGE 1
9 P31001 HOSE JOINT 3/8(STRAIGHT) 1 54 F71136 FLANGE 1
10 - 1 55 Y01030 CSM6_30 6
11 P30600 PLUG 1/8 26 56 B60229 KEY 12
12 P40008 NIPPLE φ4 2 57 Y02016 HEXAGON SOCKET HEAD CAP BOLT M8*16 12
13 R28075 ECCENTRIC SHAFT 1 58 H40480 1
14* W06011 O-RING P11 2 59 G41107 COUPLING 1
15* G40183 COUPLING CONCAVE TEETH 1 60 F83002 UNCLAMP CYLINDER 1
16* Y03110 HEXAGON SOCKET HEAD CAP BOLT M10*110 1 61 W06165 O RING P-165 1
17 Y03040 HEXAGON SOCKET HEAD CAP BOLT M10*40 9 62* Y59021 STRAIGHT PIN φ8m6*30 2
18 W06170 O RING P-170 1 63 R23183 SHAFT 1
19 W06190 O RING P- 190 1 64* W06007 O RING P-7 1
20 S20296 PACKING 1 65 F48096 ECCENTRIC RING 1
21 Y58221 STRAIGHT PIN 8*20 1 66 W08120 O RING S- 120 2
22 B40278 PLATE 1 67 SERVOMOTOR (HC352S) 1
23 Y29260 CTM6_20 4 68 CANNON 1
24 1 69 CANNON 1
25* W06010 O RING P- 10 1 70* Y04035 HEXAGON SOCKET HEAD CAP BOLT M12*35 4
26 Y70016 CIRCULAR WASHER M16 4 71 G40126 SPUR GEAR 1
27 Y19021 HEX. HEAD BOLT M16*55 8 72 Y80090 SHPANRING 1
28 B51235 PLATE 1 73 A29039 BASE 1
29 Y03030 CSM10_30 9 74 X31766 COOLANT GUIDE PACKING 1
30 Y19011 HEX. HEAD BOLT M6*20 4 75 R32194 CYLINDER 1
31 H34528 LINER 1 76 W06034 O RING P-34 1
32 H34527 LINER 1 77 W06038 O RING P-38 1
33 CHM5_8 CHM5_8 2 78 F34137 COLLAR 1
34 H58431 ANGLE 1 79 B40266 LID FOUR GUIDE PISTON 1
35 H58431 NUT 1 80 Y01012 HEXAGON SOCKET HEAD CAP BOLT M6*12 3
36 Y01014 HEXAGON SOCKET HEAD CAP BOLT M6*14 2 81* Y02025 HEXAGON SOCKET HEAD CAP BOLT M8*25 2
37 E66133 PROXIMITY SWITCH 8M 1 82 R31336 PISTON 1
38* Y73437 COMPRESSION SPRING TL10*25 1 83 W06012 O RING (P-12) 1
39 F67473 FLANGE 1 84 W06025 O RING (P-25) 1
40 W06210 O RING P- 210 1 85 F30249 COLLAR 1
41* Y04040 HEXAGON SOCKET HEAD CAP BOLT M12*40 6 86 R24767 COOLANT GUIDE 1
42 S15576 CROSS ROLLER BEARING 2 87 W06009 O RING (P-9) 2
43 N73055 LOCK NUT 1 88 W06018 O RING (P-18) 1
44 Y00114 HEXAGON SOCKET HEAD CAP BOLT M4*14 3 89 X44611 ROUND RUBBER 1
45 F53231 FLANGE 1 90 F41064 COLLAR 1
91 Y73455 COMPRESSION SPRING TF30*25 1
(Q00653001)
(PL-CENL2500-00)
TURRET P-5
<MC specification turret (for NL standard holders and SL-standardized holders)>

18 15 16 13 11 9
10
26
24 9
23
13
24
16
2
18
61
28
8
59
28
56
12 66 1
(Q00652004 1/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-6
61 59 56 28 2 23 26 24 3 18 15 11 13
16
14
41
17
19
(Q00652004 2/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-7
4 MC specification
46 36 22 20 26 43 39 48 3
13 11 15 18 8 21 26 42
16
5
24
41
23
53
14 19
51
38
17
20
10
25
29
56
1 6
View A
31 40 57 50 56 54 52 12
27 MC specification
Section B-B
(Q00652004 3/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-8
45 10 49 47 44 1 3
24
30
Turret head 4 25
Milling unit (MC specfication)

12
Standard: HC352
S specification: HC452
54
56
51
53
52
5 22 20 38 39 40 31 41 55 57 58 50 2
6
7 Y-axis specfication 36 12-station 32 12-station (machines with/without Y-axis)
37 10-station 33 10-station (machines without Y-axis)
34 10-station (machines with Y-axis)
35 12-station (VDI face mounting specification)
(Q00652004 4/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-9
Coolant guide piston Coolant guide piston (Y-axis specification)
65
78
60 8 9 Y-axis specfication
72 59 76 70 74 71 73 68 61
62
56
63
77 64 66 67 75 79
69 12-station (VDI outer face mounting specification)
(Q00652004 5/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-10
1 A05148A TOOL POST 1 40 W09242A D RING 186.5*8.2*10 1
2 B40278A PLATE 1 41 Y03040A HEXAGON SOCKET HEAD CAP BOLT M10*40 10
4 B72614A LINER 2 43 Y59021A PIN φ8M6*30 2
5 F57994A FLANGE 1 44 F48097A ECCENTRIC RING 1
6 F67463A FLANGE 1 45 G04126A SPUR GEAR 1
7 F67464A FLANGE 1 46 S15568A CROSS ROLLER BEARING RA20013C-CC0 1
8 P30600A PLUG 1/8 3 47 W08120A O RING S-120 2
9 P30602A PLUG 3/8 4 48 Y04035A HEXAGON SOCKET HEAD CAP BOLT M12*35 4
10 P30604A PLUG 3/4 1 49 Y80090A SPAN RING PL044*080 SL 1
11 P31001A HOSE JOINT 1009 9 2 50 B35532A BLOCK 1
12 Y19077A HEX. HEAD BOLT M16*65(12.9) 7 51 E66133A PROXIMITY SWITCH FL7M-2J6HD-904 2
13 P31038A HOSE JOINT 1009-0812 1 52 H25135A DOG 1
14 P32309A BUSHING SBU03-010J 1 53 H58431B DOG MOUNTING PLATE 1
15 P32311A NIPPLE SNP03-000J 1 54 R23185B SHAFT 1
16 P32371A T TYPE CONNECTOR STA03-000J 1 55 W06007A O RING P-7 1
17 P32518A VALVE SAP01-000J 1 56 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 5
18 P40008A NIPPLE PD4 2 57 Y01020A HEXAGON SOCKET HEAD CAP BOLT M6*20 2
19 R28075B ECCENTRIC SHAFT 1 58 Y73178A COMPRESSION SPRING TR17*25 1
20 S20296A PACKING OV 307*321*8 1 59 A29039A BASE 1
21 W06011A O RING P-11 2 60 A29040A BASE 1
22 W09239A D RING 208.3*8.2*10 1 61 B40266A LID 1
23 Y02025A HEXAGON SOCKET HEAD CAP BOLT M8*25 18 62 F30249A COLLAR 1
26 Y19011A HEX. HEAD BOLT M6*20(12.9) 2 65 H58449A COVER 1
27 Y24012A COUNTERSUNK HEAD SCREW M5*12 2 66 R24767A COOLANT GUIDE 1
28 Y29260B HEXAGON SOCKET TRUSS HEAD MACHINE 8 67 R31336B PISTON 1
SCREW M6*20(SILVER 2) 68 R32194A CYLINDER 1
29 Y58221B STRAIGHT PIN 8*20(H7) 2 69 R34027A COOLANT GUIDE 1
30 Y70917A WASHER M16 7 70 W06009A O RING P-9 2
31 F83002A CYLINDER 1 71 W06012A O RING P-12 1
32 G40183A COUPLING 1 72 W06018A O RING P-18 1
36 G41107A COUPLING 1 76 X31766A PACKING 1
37 G41112A COUPLING 1 77 X44611A ROUND RUBBER 1
38 W09240A D RING 181.4*8.2*10 1 78 Y29252B HEXAGON SOCKET TRUSS HEAD MACHINE 2
39 W09241A D RING 201.6*8.2*10 1 SCREW M5*8(SILVER2)
79 Y73455A COMPRESSION SPRING TF30*25 1
(Q00652004)
(PL-CENL2500-12)
TURRET P-11
8 10 2
36 10 5 7 2 39 16 41
13
12
C 37
28
41
45 40
8
18
23
33
17
38
48
44 49 (For adjusting)
25 21
1
34
14
15 29
C 43 35
30 47 19 26 42 9 27 24 11
27
43 8 31 3 24 19 42 26 20 9 6
45
24 14 1
5 27
36
42
C Milling unit (MC specification)
7
10
42
28 26
12
6
26
39 20
41 19
29
2
9 9
46
35 TU0000A01 TU0002A01
A24227A 1 F69104B 1 H67005A 1 S03312A 2 E40802A 1
32 B29022A 1 F69109A 1 H67142A 1 S03313A 2 R02081A 1
34 27
E40802A 1 F69110A 1 N10043A 1 U40634A 1
22 E40803A 1 F69111A 1 N71063B 1 W07019A 1
4
E53117A 1 F69112A 1 P15115B 2 W09040A 2
13 F41078B H66131A P31001A X32250A
1 1 2 1
43 15 47 30 44 F54188A 1 H66132A 1 R02081A 1 X38596B 1
37 33 44
Section C-C 1
38
F69103A 1 H67002A 1 R37181A 1
C
NOTE
Service set No.:
TU0000: Milling unit
TU0002: Milling unit (minimum unit)
(Q00652004 6/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-12
1 A24227A MOTOR BASE 1 27 R37181A STATOR FIXING FLANGE 1
2 B29022A BLOCK 1 28 S03312A ANGULAR CONTACT BALL BEARING 2
7906CDLLBG/GNP42/L44
3 E40802A BUILT-IN ROTOR SJ-PMB01425-A1 1
29 S03313A ANGULAR CONTACT BALL BEARING 2
4 E40803A BUILT-IN STATOR SJ-PMB01425-A1 1
7907CDLLBG/GNP42/L44
30 U40634A SILENCER SL-6A-FL237179 1
6 F41078B COLLAR 1
31 W06008A O RING P-8 4
7 F54188A FLANGE 1
32 W06010A O RING P-10 2
8 F69103A FLANGE 1
33 W07019A O RING GS155 1
9 F69104B FLANGE 1
34 W07070A O RING G-70 1
10 F69109A COVER 1
35 W07075A O RING G-75 1
11 F69110A FLANGE 1
36 W07110A O RING G-110 2
12 F69111A FLANGE 1
37 W07140A O RING G-140 1
13 F69112A FLANGE 1
38 W09040A O RING GS160 2
14 H66131A PLATE 1
15 H66132A PLATE 1
16 H67002A PLATE 1
19 N10043A HEXAGON SOCKET HEAD CAP BOLT 1
20 N71063B LOCK NUT 1
45 Y20508A PAN HEAD SCREW M4*8 2
21 P15115B MEDIUM PRESSURE HYDRAULIC HOSE 2
46 Y24016A COUNTERSUNK HEAD SCREW M5*16 2
NWP70 9*1300
47 Y29091A HEXAGON SOCKET TRUSS HEAD MACHINE 2
22 P30600A PLUG 1/8 2 SCREW M5*12(PARKER)
23 P30602A PLUG 3/8 3 48 Y70086A CIRCULAR WASHER M12-21-13-T=2.5 4
24 P30636A PLUG 1/16 4 49 R28075B ECCENTRIC SHAFT 1
25 P31001A HOSE JOINT 1009 9 2 50 TU0000A TOOLPOST_MILLING_UNIT NL1500_2500 MITSUB 0
26 R02081A SHAFT 1 51 TU0002A TOOLPOST_MILLING_UNIT NL1500_2500 MITSUB 0
(Q00652004 6/8)
(PL-CENL2500-12)
TURRET P-13
26 NL1500, NL2000, NL2500 (12-station turret specification) 19 NL1500, NL2000, NL2500 (Turning specification 10-station turret) 4 NL1500, NL2000, NL2500 (Turning specification 10-station turret)
25 NL1500, NL2000, NL2500 (10-station turret specification) 17 NL1500, NL2000, NL2500 (MC specification 10-station turret) 3 NL1500, NL2000, NL2500 (MC specification 10-station turret)
16 NL1500, NL2000, NL2500 (Turning specification 12-station turret) 2 NL1500, NL2000, NL2500 (Turning specification 12-station turret)
D 15 NL1500, NL2000, NL2500 (MC specification 12-station turret) 1 NL1500, NL2000, NL2500 (MC specification 12-station turret)
28 29 13 12 30
35
13
23 12-station turret
24 10-station turret
14
38
1
15
Section D-D
15 38 33 36 13 14 1
38 31
D
20 34
10
27
23
Turrt head
(Q00652004 7/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-14
40 NL1500: SL-standardized turret (12-station, MC and inch specifications)

39 NL1500: SL-standardized turret (12-station, MC and metric specifications)
8 NL2000, NL2500: SL-standardized turret (10-station, MC and inch specifications)
7 NL2000, NL2500: SL-standardized turret (12-station, MC and inch specifications)
38 18 6 NL2000, NL2500: SL-standardized turret (10-station, MC and metric specifications)
E 5 NL2000, NL2500: SL-standardized turret (12-station, MC and metric specifications)
11 12
33 9
22 44 42 30
18 23
37
35
25
5
38
32
18 38
41 E Section E-E 20 34
25 NL1500, NL2000, NL2500: SL-standardized turret (MC specification 12-station turret)

26 NL2000, NL2500: SL-standardized turret (MC specification 10-station turret)
43
21 NL2000, NL2500: SL-standardized turret (MC specification 10-station turret)

22 NL1500, NL2000, NL2500: SL-standardized turret (MC specification 12-station turret)
Turret head (SL-standardized MC specifications)

33
23
(Q00652004 8/8 2006.01.23)
(PL-CENL2500-12)
TURRET P-15

1 B01087A TURRET HEAD 1
9 B60229A KEY 12
10 F53231A FLANGE 1
11 F53259A FLANGE 1
12 F55346A COLLAR 1
13 F69117A FLANGE 6
14 F69118A FLANGE 12
15 F72166A FLANGE 1
16 F72167A FLANGE 1
17 F72168A FLANGE 1
18 F72169B FLANGE 1
19 F72170A FLANGE 1
20 F83003A FLANGE 1
21 F83137B FLANGE 1
22 F83140B FLANGE 1
23 G40184A COUPLING 1
24 G40193A COUPLING 1
25 H40824A TURRET NO. PLATE (12) 1
27 P30600A PLUG 1/8 30
28 W07300A O RING G-300 1
29 W08063A O RING S-63 12
36 Y58221B STRAIGHT PIN 8*20(H7) 12
37 W07270A O RING G-270 1
42 W07290A O RING G-290 1
43 F61087B FLANGE 12
44 W06026A O RING P-26 12
(Q00652004)
(PL-CENL2500-12)
TURRET P-16
<VDI turret 12-station>
7 6 5 4 3 2 1
10
13 14 15 16 11
12
Lock Pin Assembly Diagram

(Q00788001 2004.11.16)
(PL-CENL2500-07)
TURRET P-17

2 F30293A BUSH 12
3 F76048A LID 12
4 W07300A O RING G-300 1
5 F61087B FLANGE 12
6 W06026A O RING P-26 1
7 F83148A FLANGE 1
8 W07270A O RING G-270 1
9 F72169B FLANGE 1
11 R34027A COOLANT GUIDE 1
12 F53256A FLANGE 1
13 Y75018A INTERNAL SNAP RING TH-A-18 12
14 F30121A COLLAR 12
15 R22042A PIN 12
(Q00788001)
(PL-CENL2500-07)
TAILSTOCK
TAILSTOCK P-1
<NL2500/700>
5 45 3 42 4 1 ∗
88 88 88 88 88 88 4 45 5 3 1 46 6 7 33 2
42
88 88 88 88 88 1 1 88 88 88
A 88
34
88
44
88
A
Live Center Specification
12 11 17 30 16 24 10 14 9 22 1 32 25 26 27 6 29 33 2
15
88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 1 88 88 88
24 19 21 8 16 17 88
88 88 88 88 88 88
B 13
88
34
28 88
18 88
88
13 31
88 88
44
8 88
88
20
88
21
88
20
88
35 19
88 88
B
18 23
88
88
Built-in Center Specification
1 23
88 88
NOTE (1) Balloon top number: Parts list number

(2) ∗: Tailstock drill specification (MT5)
(Q00651002 1/2 2005.05.11)
(PL-CENL2500-05)
TAILSTOCK P-2
36
88
38
88
40
88
42 43 39 41 37
88 88 88 88 88
NOTE
(Q00651002 2/2 2005.05.11)
(PL-CENL2500-05)
TAILSTOCK P-3

1 A07076C TAILSTOCK 1
2 F55316A FLANGE 1
3 R03186B TAILSTOCK SPINDLE 1
4 K42009A LIVE CENTER TYPE600-5490(MT5) 1
6 F32121A COLLAR 1
9 F34134A COLLAR 1
10 S05043A DOUBLE-ROW CYLINDRICAL ROLLER BEARING NN3008KC1NAFWP5U00B 1
11 F34014A COLLAR 1
13 F57642B FLANGE 1
14 F42132A COLLAR 1
15 S03078A ANGULAR CONTACT BALL BEARING 7206-5DBTSFGP5U00B 1
17 F69088B FLANGE 1
19 Y75540A SEAL WASHER WF4*7.4*1.0 6
21 K41003A CENTER MT3 1
22 R24703B SHAFT 1
23 H58229A COVER 1
25 F33056A COLLAR 1
26 Y72006A BEARING LOCK WASHER AW-06 1
27 Y62006A LOCK NUT AN-6 1
28 F45237A COLLAR 1
30 W07065A O RING G-65 1
31 W08036A O RING S-36 1
32 W06011A O RING P-11 2
33 W08090A O RING S-90 1
36 P40172A ELBOW PHD4 1
37 P40182A PLUNGER DPB-11 0.1cc 1
38 P40001A PLUG PA6 1
39 P40012A ELBOW PH6 1
40 P40120A PLUG PG10N 1
41 P40000A PLUG PA4 1
43 H34425A LID 1
44 Y90038A HANDLE TL-276 1
45 H38411A LID 1
46 F49035A FLANGE 1
(Q00651002)
(PL-CENL2500-05)
TAILSTOCK P-4
<NL2500/1250>
∗
38 NL3000
35 26 44 27 35 26 44 46 20 21 45 2 40 43
1 NL2500/1250
A
42
A 1 NL2500/1250
38 NL3000
Live Center Specification
38 NL3000
1 NL2500/1250
9 12 25 22 7 6 5 15 14 44 11 38 NL3000 24 4 17 18 19 20 45 2 40 43
11 44
B 1 NL2500/1250
8
23
13
34 10
16
B
21
Built-in Center Specification
NOTE
∗: Tailstock drill specification (MT5)
(Q00650005 1/2 2005.12.08)
(PL-CENL2500-10)
TAILSTOCK P-5
36
32
33
29
37
39
42 30 28 31 41
(Q00650005 2/2 2005.12.08)
(PL-CENL2500-10)
TAILSTOCK P-6

1 A07080B TAILSTOCK 1
2 F55330A FLANGE 1
4 S03259A ANGULAR CONTACT BALL BEARING 7207-5DBTSFGP5U00B 1
5 F42135B COLLAR 1
6 S05046A DOUBLE-ROW CYLINDRICAL ROLLER BEARING NN3010KC1NA 1
7 F35081A COLLAR 1
9 F47267A FLANGE 1
12 F47318A FLANGE 1
13 K41004A CENTER MT4 1
14 R24713B SHAFT 1
15 F37095A COLLAR 1
16 H53870A COVER 1
17 F33107A COLLAR 1
20 F33156A COLLAR 1
22 W07080A O RING G-80 1
23 W08045A O RING S-45 1
24 W06014A O RING P-14 2
27 K42209A 1
29 P40120A PLUG PG10N 1
30 P40012A ELBOW PH6 1
31 P40000A PLUG PA4 1
32 P40001A PLUG PA6 1
35 H38412A LID 1
37 Y29257B HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*12(SILVER 2) 3
38 A07078C TAILSTOCK 1
39 H34185B LID 1
41 H34425A LID 1
43 Y90038A HANDLE TL-276 1
45 W08120A O RING S-120 1
46 F49036A FLANGE 1
(Q00650005)
(PL-CENL2500-10)
TAILSTOCK P-7
Tailstock Base
8
1
9
1
4
1
3
1
23
3
32 6 15
10
9 16 1 19 5 32
1
1 90 9
31
1
7
2 22
3
1
1
30
1
13
2
18 11
90 6
32
9
12
4 21 NL1500, NL2000
15 1
2
28
1 NL2500/700, NL3000/700
20
NL1500, NL2000 29
1 14
1
NL2500/1250, NL3000/1250
24 1
NL2500/700 1
25
NL2500/1250 1
26
NL3000/700 1 11
17
1
27 6
NL3000/1250 1
34
NL2500/700, NL3000/700 1 2
1
NL2500/1250, NL3000/1250
35
NL2500/1250, NL3000/1250 1 33
1 NL1500, NL2000, NL2500/700, NL3000/700
36
NL2500/700, NL3000/700 4
37
NL2500/1250, NL3000/1250 5
(Q00645003 2005.02.18)
(PL-CENL2500-04)
TAILSTOCK P-8

1 A11059B TAILSTOCK BOTTOM PLATE 1
2 S15447A LINEAR GUIDE SHS35LR2QZSSC0E+1960 1
3 B72557A LINER 1
4 B72558A LINER 1
5 X24771A SHAPED SLIDE SEAL 2
7 Y33016A FLAT POINT SOCKET SET SCREW M8*16 2
8 B24295A GIB 1
9 N10001A BOLT 1
10 X23265A SLIDE SEAL 1
14 H33972A PLATE 1
18 H75533A CHIP COVER 1
19 P40001A PLUG PA6 1
20 H70544C CHIP COVER 1
21 U30879C PROTECTOR EM-74824 1
22 Y75560A SEAL WASHER WF6*10*1(M6) 3
24 H75521B CHIP COVER 1
26 H04174B SLIDE COVER 1
27 H04178A SLIDE COVER 1
29 U30594A PROTECTOR EM-74886 1
30 H97492A LINER 1
33 S15411A LINEAR GUIDE SHS35LR2QZSSC0E+1400 1
34 X48742A GUIDE PLATE 1
35 X48743A GUIDE PLATE 1
(Q00645003)
(PL-CENL2500-04)
X-AXIS DRIVE
X-AXIS DRIVE P-1
NL1500 - NL2500 34
NL1500Y - NL2500Y 3
NL3000 4
NL1500 - NL2500 33
NL1500Y - NL2500Y 2
NL3000
11 12 13 3 14 15 16 17 18 19 5
10 NL1500 - NL2500
41
6 7 8 9 32 NL3000
BS1068A01 BS1069A01
H98160A 1 H98160A 1
N00063A 1 N00064A 1
N50101A 1 N50101A 1
R58087A 2 R58087A 2
S19009A 104 S19009A 140
X48155A 2 X48155A 2
Y29916A 3 Y29916A 3
Y31406A 4 Y31406A 4
20 21 22
38 23 24 25 26 27 28 29 30 31
35
36 NL1500 - NL2500
37 NL3000
Sectional View
NOTE
Service set No.:
BS1068: NL1500 - NL2500
BS1069: NL3000
(Q00695004 2007.09.06)
(PL-CENL2500-23)
X-AXIS DRIVE P-2

3 X48052A STOPPER 1
6 F64064B COLLAR 1
7 B05163A HOLDER 1
8 S03494A ANGULAR CONTACT BALL BEARING 2A-BST20*47-20BL*LP4 3
9 F43036B COLLAR 1
10 N00063A BALL SCREW 1
11 N50101A BALL NUT 1
12 B72620A LINER 1
13 B62037B KEY 1
14 H91956A LID 1
15 E55126A ELECTROMAGNETIC BRAKE RNB 1.6G-42 1
16 Y80113A SPAN RING SCE300 25*30 1
17 F54044A FLANGE 1
18 Y80093A COUPLING NEF18KK-25C*35C 1
19 A06209C FEED BOX 1
20 Y62420A KMT NUT FKN20(M20*1.5) 1
21 F43116A COLLAR 1
23 Y29916A PAN HEAD SCREW M5*8(SW) 3
25 R58087A BALL SCREW TUBE 2
26 S03495A BEARING 2A-BST30*62-20BL*LP/ 1
27 F44036A COLLAR 1
28 Y62418A KMT NUT FKN30(M30*1.5) 1
30 Y19008A HEX. HEAD BOLT M6*18(12.9) 4
31 P31432A NIPPLE PN-10*7.5-PT3/8-BS 4
34 B43643A STOPPER 1
35 Y31406A CONE POINT SOCKET SET SCREW M5*6 4
36 S19009A STEEL BALL 1/4+-0(GRADE20) 104
38 X48155A DUST SEAL 2
39 BS1068A BALL_SCREW_UNIT NL1500_2500 X_AXIS 0
40 BS1069A BALL_SCREW_UNIT NL3000 X_AXIS 0
41 Y52540A TAPER PIN 2
(Q00695004)
(PL-CENL2500-23)
X-AXIS DRIVE P-3
<Ball screw center cooling specification>
52 51
40
53
43 42
54
55
56
57
@
∗#
Section D-D 41
45 46 47
BS1070A01 BS1071A01
H98160A 1 H98160A 1
Section C-C N00295B 1 N00303B 1
40 44 N50101A 1 N50101A 1
R58087A 2 R58087A 2
S19009A 104 S19009A 140
Section B-B Section E-E X48155A 2 X48155A 2
Y29916A 3 Y29916A 3
∗ ∗ Y31406A 4 Y31406A 4
C
48 49
A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 @# 15 @# 16 17 18 19 20 59 21 58 22 23 24 25 26 27
D
B
41
B
E
D
40 39 38 37 @ 36 60 35 34 ∗# 62 33 32 31 30 29 28
A ∗# 50 61 @ 63
E
C
Section A-A
NOTE (1) ∗: NL1500 - NL2500
(2) #: NL1500Y - NL2500Y
(3) @: NL3000
(4) Service set No.:
BS1070: NL1500 - NL2500
BS1071: NL3000
(Q00762004 2006.01.23)
(PL-CENL2500-12)
X-AXIS DRIVE P-4
1 F43146A COLLAR 1 33 Y29916A PAN HEAD SCREW M5*8(SW) 3
2 F62094A FLANGE 1 34 H98160A CLAMPING PLATE 1
3 S20267A OIL SEAL TCZ40209(AP1031F0) 1 35 R58087A BALL SCREW TUBE 2
4 F66278A FLANGE 1 36 N00303B BALL SCREW 1
5 Y62420A KMT NUT FKN20(M20*1.5) 1 37 W06022A O RING P-22 1
6 F64144A FLANGE 1 38 W06012A O RING P-12 1
7 F43037B COLLAR 1 39 W07050A O RING G-50 1
8 S03494A ANGULAR CONTACT BALL BEARING 2 40 Y01030A HEXAGON SOCKET HEAD CAP BOLT M6*30 7
2A-BST20*47-20BL*LP4 41 Y04040A HEXAGON SOCKET HEAD CAP BOLT M12*40 8
9 B05163A HOLDER 1 42 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 4
10 F43036B COLLAR 1 43 Y01016A HEXAGON SOCKET HEAD CAP BOLT M6*16 4
11 Y62404A KMT NUT KMT5(M25*1.5) 1 44 Y00340A HEXAGON SOCKET HEAD CAP BOLT M5*40 4
12 N50101A BALL NUT 1 45 Y02060A HEXAGON SOCKET HEAD CAP BOLT M8*60 4
13 B72620A LINER 1 46 Y00330A HEXAGON SOCKET HEAD CAP BOLT M5*30 3
14 B62037B KEY 1 47 Y19008A HEX. HEAD BOLT M6*18(12.9) 4
16 X48052A STOPPER 1 49 B43643A STOPPER 1
17 F44019A COLLAR 1 50 N00295B BALL SCREW 1
18 Y62418A KMT NUT FKN30(M30*1.5) 1 51 P32310A NIPPLE SNP02-000J 1
19 F56321A FLANGE 1 52 P32344A JOINT SFC02-000J 1
20 Y21510A PAN HEAD SCREW M6*10 2 53 P32353A ELBOW SLC02-000J 1
21 S20266A OIL SEAL TCN482811(AP1563J4) 2 54 P31778A QUICK JOINT KFL08N-02S 1
22 F66277A FLANGE 1 55 P18433A AIR TUBE TS0806 W (L=1500) 1
23 E55110A ELECTROMAGNETIC BRAKE RNB1.6G-38 1 56 H58892A GUIDE PLATE 1
24 Y80113A SPAN RING SCE300 25*30 1 57 H58898B GUIDE PLATE 1
25 P31432A NIPPLE PN-10*7.5-PT3/8-BS 4 58 P32304A JOINT SSS02-020J 1
26 H91957A LID 1 59 P31430A JOINT PL-10*7.5-PT3/8-BS 1
27 A06226A FEED BOX 1 60 X48155A DUST SEAL 2
28 P30636A PLUG 1/16 1 61 Y31406A CONE POINT SOCKET SET SCREW M5*6 4
29 Y80095A COUPLING EPR68-25*35 1 62 S19009A STEEL BALL 1/4+-0(GRADE20) 104
30 F54044A FLANGE 1 63 S19009A STEEL BALL 1/4+-0(GRADE20) 140
31 W07065A O RING G-65 1 64 BS1070A BALL_SCREW_UNIT NL1500_2500 X_AXIS CENTE 0
32 S03495A BEARING 2A-BST30*62-20BL*LP/ 2 65 BS1071A BALL_SCREW_UNIT NL3000 X_AXIS CENTER_COO 0
(Q00762004)
(PL-CENL2500-12)
Y-AXIS DRIVE
Y-AXIS DRIVE P-1
13 12 8 9 11 10
2 3
BS1072A01
H98160A 1
N00296A 1
N50101A 1
R58085A 2
S19009A 104
X48155A 2
26 11 9
25 24 23 20 17 18 16 10 8
33 34 31 32 1 3 2 36 4
7 6 35 5
22 21 19 15 14 27 29 28 27
30
Sectional View
Service set No.: BS1072

NOTE
(Q00717004 2006.04.04)
(PL-CENL2500-13)
Y-AXIS DRIVE P-2

2 B05163A HOLDER 1
4 Y62420A KMT NUT FKN20(M20*1.5) 1
5 F43116A COLLAR 1
7 F43036B COLLAR 1
8 X48052A STOPPER 2
10 A06208B FEED BOX 1
12 H34739A PLATE 1
15 F44019A COLLAR 1
16 F55094A COLLAR 1
17 F53278A FLANGE 1
19 Y62418A KMT NUT FKN30(M30*1.5) 1
20 E55126A ELECTROMAGNETIC BRAKE RNB 1.6G-42 1
21 F54044A FLANGE 1
22 Y11016A HEX. HEAD BOLT M6*16 4
23 Y80113A SPAN RING SCE300 25*30 1
24 Y80095A COUPLING EPR68-25*35 TK 1
33 B62039A KEY 1
34 B72620A LINER 1
35 S00078A DEEP GROOVE BALL BEARING 6204C2P5 1
36 F31029A COLLAR 1
37 BS1072A BALL_SCREW_UNIT NL1500_3000 Y_AXIS 0
(Q00717004)
(PL-CENL2500-13)
Z-AXIS DRIVE
Z-AXIS DRIVE P-1
3
2
1
6
4
BS1062A01 BS1063A01
1 S19015A 104 S19015A 104
N00294A 1 N00301B 1
X29035A 2 X29035A 2
R58024A 2 R58024A 2
H16997B 1 H16997B 1
21
N50100B 1 N50100B 1
10 NL1500, NL2000 12 22 23 13 14 15 16 17
7 8 9 11 NL2500/700
19
18 19 20 24 25 26 27 29 18
NOTE
Service set No.:
BS1062: NL1500, NL2000
BS1063: NL2500/700
(Q00696006 2006.02.21)
(PL-CENL2500-12)
Z-AXIS DRIVE P-2

3 H34387A LID 1
4 B27060A GIB 3
7 F44036A COLLAR 1
8 B05159D HOLDER 1
9 F35090A COLLAR 1
10 N00294B BALL SCREW 1
12 N50100B BALL NUT 1
13 F44019A COLLAR 1
14 F55093A COLLAR 1
16 Y80092A COUPLING EPR68-28*35 1
18 Y62418A KMT NUT FKN30(M30*1.5) 2
20 S00183A DEEP GROOVE BALL BEARING 6206ZZC2P5/2A 1
24 X29035A BALL SCREW DUST SEAL 2
30 BS1062A BALL_SCREW_UNIT NL1500_2000 Z_B_AXIS 0
(Q00696006)
(PL-CENL2500-12)
Z-AXIS DRIVE P-3
<NL2500/1250>
5
1
NL2500, NL3000/1250 NL3000/700
BS3036A01 BS3037A01 4
1
S19015A 134 S19015A 134
N00065B 1 N00302C 1
X29050A 2 X29050A 2
R58081A 2 R58081A 2
H93185A 1 H93185A 1 3
1
N50087A 1 N50087A 1
B41324A 1 B41324A 1
2
2
32
4
9
3
8
1 3
10
1
10
18
1
17
31 1
1 NL3000/700 16
4
11 20 6 12 13 14 15
1 1 4 6 1 2 77
NL2500, NL3000/1250
10
1
7
2
27
2
19 28 21 22 23 24 25 26 34 28 29 30
2 5 1 1 2 3 2 1 134 5 1 1
NOTE (1) Balloon top number: Parts list number

(2) Service set No.:
BS3036: NL2500/1250, NL3000/1250
BS3037: NL3000/700
(Q00697004 2006.01.23)
(PL-CENL2500-12)
Z-AXIS DRIVE P-4

3 H34387A LID 1
4 E68311A CONNECTOR SET CE05-6A24-10SD-B 1
5 E68039A CONNECTOR SET MS3102A-28-20S 1
8 B27060A GIB 3
10 F44036A COLLAR 1
11 F35090A COLLAR 1
17 Y80092A COUPLING EPR68-28*35 1
19 Y62418A KMT NUT FKN30(M30*1.5) 2
21 B05159D HOLDER 1
22 B41324A BLOCK 1
29 F44019A COLLAR 1
30 F55093A COLLAR 1
31 N00302C BALL SCREW 1
35 BS3036A BALL_SCREW_UNIT NL2500_1250 NL3000_1250 0
36 BS3037A BALL_SCREW_UNIT NL3000_700 Z_AXIS 0
(Q00697004)
(PL-CENL2500-12)
B-AXIS DRIVE
B-AXIS DRIVE P-1
<Headstock 2 specification>
26
25
BS1062A01 BS1063A01 BS1064A01

S19015A 208 S19015A 104 S19015A 104
6 N00294B 1 N00301B 1 N00066A 1
X29035A 2 X29035A 2 X29035A 2
R58024A 2 R58024A 2 R58024A 2
H53641A 1 H16997B 1 H16997B 1
5 N50100B 1 N50100B 1 N50100B 1
10 NL1500, NL2000
23
24 11 NL2500/700
13 14 15 16 17
22 27 28 12 NL2500/1250
7 8 9
32 NL1500, NL2000
18 19 20 21 3 29 30 31
33 NL2500
18
21
NOTE
Service set No.:
BS1062: NL1500, NL2000
BS1063: NL2500/700
BS1064: NL2500/1250
(Q00694005 2006.02.21)
(PL-CENL2500-12)
B-AXIS DRIVE P-2

1 H34387A LID 1
3 B43605A BLOCK 1
7 F33275A COLLAR 1
8 F55318B COLLAR 1
9 B05159D HOLDER 1
13 F35075A COLLAR 1
14 F44036A COLLAR 1
15 Y80096A COUPLING NEF18KK-28CX35C 1
16 A06210A FEED BOX 1
17 E46177A SERVOMOTOR HC353S+OSA104S2 1
18 Y62418A KMT NUT FKN30(M30*1.5) 2
20 F44019A COLLAR 1
22 N50100B BALL NUT 1
23 E68311A CONNECTOR SET CE05-6A24-10SD-B 1
24 E68309A CONNECTOR SET MS3106A22-14S-B(D190 1
36 BS1064A BALL_SCREW_UNIT NL2500_1250 B_AXIS 0
(Q00694005)
(PL-CENL2500-12)
B-AXIS DRIVE P-3
<Tailstock specification>
16 17
BS1065A01 BS1066A01 BS1067A01

H58440A 1 H58440A 1 H58440A 1
N00293C 1 N00300C 1 N00058B 1
33 N50099D 1 N50099D 1 N50099D 1
R58034A 2 R58034A 2 R58034A 2
32 S19009A 116 S19009A 116 S19009A 116
X48535A 2 X48535A 2 X48535A 2
31 NL1500, NL2000
7
1 NL2500, NL3000/700
18 19 23 25 26 2 NL2500, NL3000/1250 34 3 5 6 8 11 13 14 35
Sectional View
30 20 21 22 24 6 4 27 28 29 9 12 10 15
NOTE
Service set No.:
BS1065: NL1500, NL2000
BS1066: NL2500/700, NL3000/700
BS1067: NL2500/1250, NL3000/1250
(Q00719005 2006.01.23)
(PL-CENL2500-12)
B-AXIS DRIVE P-4

4 N50099D BALL NUT 1
5 A06207C TAILSTOCK AXIS FEED BOX 1
9 Y74030A EXTERNAL SNAP RING S-30(TH-O-30) 1
10 Y80113A SPAN RING SCE300 25*30 1
11 E55110A ELECTROMAGNETIC BRAKE RNB1.6G-38 1
13 F54044A FLANGE 1
15 Y80095A COUPLING EPR68-25*35 1
16 H34497A LID 1
18 Y62418A KMT NUT FKN30(M30*1.5) 1
19 F55318B COLLAR 1
20 F44019A COLLAR 1
21 F35075A COLLAR 1
22 F33098A COLLAR 1
24 B05159D HOLDER 1
25 B43605A BLOCK 1
36 BS1065A BALL_SCREW_UNIT NL1500_2000 TAILSTOCK_AX 0
37 BS1066A BALL_SCREW_UNIT NL2500_700 NL3000_700 TA 0
38 BS1067A BALL_SCREW_UNIT NL2500_1250 NL3000_1250 0
(Q00719005)
(PL-CENL2500-12)
SADDLE
SADDLE P-1
2 3 1 21 20 4 5 39 38 37
23 22
34 35 32 33
25 24
6 7
27 26 36 29 28 30 31 19 18 17 16 14 15 12 13 10 11 8 9
NOTE
∗: NL1500SY, NL1500Y, NL2000SY, NL2000Y, NL2500SY, NL2500Y
(Q00720001 2004.05.25)
(PL-CENL2500-00)
SADDLE P-2

1 A03167D SADDLE 1
3 Y28410A FLUSH HEAD SCREW M6*10 2
4 B22088C CLAMPER PLATE 1
6 B22088C CLAMPER PLATE 1
14 X24737C SLIDE SEAL 1
15 Y21512A 4
16 B59069B BLOCK 1
18 A15108B BALL SCREW COVER 1
20 X48052A STOPPER 1
24 B22090B CLAMPER PLATE 1
26 F40026A CLAMPING PLATE 3
36 B24296B GIB 1
38 B43643A STOPPER 1
(Q00720001)
(PL-CENL2500-00)
SADDLE P-3
<Y-axis cross slide>
14 16 15
18 2
23 22 3 6 24 7 8 12 13 11
21 17
3 4 5
4 9 19 10 20
(Q00721001 2004.05.25)
(PL-CENL2500-00)
SADDLE P-4

1 A04433C CROSS SLIDE 1
2 X24741B SLIDE SEAL 1
3 B43600A BLOCK 2
4 B24311A GIB 1
5 B22094A CLAMPER PLATE 1
6 B43599A BLOCK 1
7 B24302A GIB 1
8 B22095A CLAMPER PLATE 1
11 B24303A GIB 1
12 F40013A CLAMPING PLATE 4
14 B62039A KEY 1
15 B72620A LINER 1
17 B60134A PARALLEL KEY 1
(Q00721001)
(PL-CENL2500-00)
SADDLE P-5
<Y-axis base>
3 2 4 5 1
14
10 11 12 8 9 13 6 7
15
18
16
16
17
14 15
Detailed Mounting Diagram of X-axis Rear Cam Followers
(Q00722002 2007.04.27)
(PL-CENL2500-21)
SADDLE P-6

1 A03168B Y-AXIS BASE 1
4 B30586B PLATE 1
10 B43599A BLOCK 1
12 B24298B GIB 1
13 B72620A LINER 1
14 S16028A CAM FOLLOWER CFH12UUR-A 2
17 B33320A BLOCK 1
18 B33321A BLOCK 1
(Q00722002)
(PL-CENL2500-21)
SADDLE P-7
<MC cross slide>
1 2 3 4 5
14
7 6
8 9
15
12
18
16
16
17
14 15
13
Detailed Mounting Diagram of X-axis Rear Cam Followers
11 10
(Q00657002 2007.04.27)
(PL-CENL2500-21)
SADDLE P-8

1 B72629A LINER 1
2 B72630A LINER 1
3 B72631A LINER 1
4 B72632A LINER 1
5 A04432C CROSS SLIDE 1
8 B24297B GIB 1
9 B43599A BLOCK 1
12 B04103A LINER 1
13 B04104A LINER 1
14 S16028A CAM FOLLOWER CFH12UUR-A 2
17 B33320A BLOCK 1
18 B33321A BLOCK 1
(Q00657002)
(PL-CENL2500-21)
SPLASH GUARD
SPLASH GUARD P-1
<NL2500/700>
3 4 13 51 14 15 1 2
35 36
5
6
7
8
9
10 39 40
14 15
12 11 33 37 38
26 25 29 34
30
18 17 16
32 31
20 19
28 27
22 21 24 23
42 41
43 44 45 46 47 48 50 49
(Q00698001 2004.05.25)
(PL-CENL2500-00)
SPLASH GUARD P-2
1 B63116A BRACKET 1 26 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 2
2 Y06030A HEXAGON SOCKET HEAD CAP BOLT M16*30 4 27 H66167A CHIP COVER 1
3 B63117B BRACKET 1 28 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 6
4 Y06030A HEXAGON SOCKET HEAD CAP BOLT M16*30 2 29 H75438B CHIP COVER 1
5 H58247B OIL PAN 1 30 Y28410A FLUSH HEAD SCREW M6*10 4
6 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 3 31 H59023C MOTOR COVER 1
7 H58196B BRACKET 1 32 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 4
8 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 2 33 A34393B BRACKET 1
9 B63118C BRACKET 1 34 Y03040A HEXAGON SOCKET HEAD CAP BOLT M10*40 2
10 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 3 35 B79685B PIPE 1
11 X48463B GUIDE 2 36 Y07045A HEXAGON SOCKET HEAD CAP BOLT M20*45 4
12 Y02050A HEXAGON SOCKET HEAD CAP BOLT M8*50 2 37 H56827B DUCT 1
13 X48462D GUIDE 1 38 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 3
14 B45404C BLOCK 2 39 B63132B ANGLE 2
16 S15411A LINEAR GUIDE SHS35LR2QZSSC0E+1400 1 41 H56826B DUCT 2
17 R20415A PIN 1 42 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 4
18 W14112A CAP C8 36 43 A34375A BRACKET 2
19 B42396A BLOCK 1 44 Y06055A HEXAGON SOCKET HEAD CAP BOLT M16*55 4
20 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 1 45 H67181A PLATE 1
21 B50069B PLATE 1 46 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 2
22 Y04030A HEXAGON SOCKET HEAD CAP BOLT M12*30 3 47 B47346A BLOCK 1
23 H58326C CHIP COVER 1 48 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 2
24 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 2 49 H56829A DUCT 1
25 H75439B CHIP COVER 1 50 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 2
(Q00698001)
(PL-CENL2500-00)
SPLASH GUARD P-3
<Chuck cover (NL2500/700)>
21 20
33 13 34 14 35 15 1
2 22
32 12
3 23
# ∗ 4 24
47 46 45 44
% %
16 36
∗ #
31 11 18 38 40 41
37 17
5 25
30 10
∗ ∗
43 42
29 9 6 26
7 27
8 28
NOTE (1) ∗: NL1500

(2) #: NL2000
(3) %: NL2000 Rear disposal type chip conveyer
(Q00702003 2005.04.14)
(PL-CENL2500-05)
SPLASH GUARD P-4

1 H71289E CHUCK COVER 1
2 H71290B CHUCK COVER 1
3 X23294B SEAL 1
4 X23295B SEAL 1
5 X23296B SEAL 1
6 X22091B SEAL 1
7 X23297B SEAL 1
8 X22092B SEAL 1
9 X22093B SEAL 1
10 X26151A SEAL 1
11 X23300A SEAL 1
12 X23299B SEAL 1
13 X23302C SEAL 1
14 X23301C SEAL 1
15 X23303B SEAL 1
17 H38407A LID 1
18 H71334A COVER 1
20 E36167A LAMP 037 656 001 1
22 Y29309A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*8(COOL SILVER) 8
23 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M5*7 (PARKER) 3
40 H71296B COVER 1
41 H71295B COVER 1
42 H71336B COVER 1
43 Y29325A PAN HEAD SCREW M6*12(COOL SILVER) 2
44 H71418A COVER 1
46 H71416A COVER 1
47 H71417A COVER 1
(Q00702003)
(PL-CENL2500-05)
SPLASH GUARD P-5
<Chuck cover (NL2500/1250)>
31 14 32 15 33 18 20 2 1
25 4
30 13
24 10
17
3 ∗
29 8
28 7 23 11
22 16
12
21 35
27 6 19 34
NOTE
∗: Used only for shower coolant specification
(Q07006001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-6

2 H71347A CHUCK COVER 1
5 E36167A LAMP 037 656 001 1
6 X22093B SEAL 1
7 X26085A SEAL 1
8 X23300A SEAL 1
12 H38407A LID 1
13 X26086A SEAL 1
14 X26087A SEAL 1
15 X26088A SEAL 1
17 H71334A COVER 1
18 X23303B SEAL 1
19 X22092B SEAL 1
21 X23297B SEAL 1
22 X22091B SEAL 1
23 X23296B SEAL 1
24 X23295B SEAL 1
25 X23294B SEAL 1
26 E70524A PROBE SENSOR N-2115-0074-01B 1
(Q07006001)
(PL-CENL2500-22)
SPLASH GUARD P-7
<Headstock front cover (NL2500/700, NL2500S/700)>
12 1 5 10 11 4 8
2 13
3 14
7
∗
NOTE
∗: S specification
(Q00703001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-8

1 H75658B OIL PAN 1
2 H71335A HEADSTOCK COVER 1
3 H40813A NAME PLATE 1
4 H59238B DUCT 1
5 H59239B DUCT 1
6 P29469A HOSE 150,L=800 1
7 H59240A LID 1
12 Y29309A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*8 (COOL SILVER) 4
(Q00703001)
(PL-CENL2500-22)
SPLASH GUARD P-9
<Headstock front cover (NL2500/1250)>
3
4
5
1
(Q07011001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-10

3 H75755A OIL PAN 1
(Q07011001)
(PL-CENL2500-22)
SPLASH GUARD P-11
<Ceiling cover (NL2500/700, NL2500S/700)>
13 12 1
∗
14 2
15 3
18 6
24 23
4 16
5 17
10 9
21
19 11
7
26
20
8 25 26
NOTE
∗: NL2500S/700
(Q00704002 2005.03.29)
(PL-CENL2500-22)
SPLASH GUARD P-12

1 H58470B TOP COVER 1
2 H58294C COVER 1
3 H70533D COVER 1
4 H58469A RAIL 1
5 B63218A RAIL 1
6 H58293B RAIL 1
7 H74294D RAIL COVER 1
8 H66171C LID 1
9 B74218C RAIL 1
11 X38732A RUBBER 1
12 H59177C TOP COVER 1
23 H34530A COVER 1
24 E32907A FAN MOTOR S18F22-WG(A167) 1
26 H66577A LID 1
(Q00704002)
(PL-CENL2500-22)
SPLASH GUARD P-13
<Right side cover (NL2500, NL2500S)>
14 8 4
3 24 23 5 6 15
12
2 13
1
7 22
21 20 19
18 11
17 10
Sub-spindle Type
9 16
(Q00705001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-14

1 H59113B RIGHT SIDE COVER 1
2 H58471B BRACKET 1
4 H75434B LID 1
5 H34233A LID 1
6 X10387A PACKING 1
7 X08150B PACKING 1
8 X10292B PACKING 1
9 H59119A RIGHT SIDE COVER 1
10 H35879A LID 3
11 H59111B AIR PANEL BOX 1
20 H58493B BRACKET 1
(Q00705001)
(PL-CENL2500-22)
SPLASH GUARD P-15
<Right side cover (NL2500/1250)>
13 12
16 5
10 14
7 9
1 15
11
8
(Q07009001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-16

1 H75434B LID 1
2 X10359A PACKING 1
3 X10292B PACKING 1
4 H35879A LID 3
5 H75766A COVER 1
6 X10358A PACKING 1
7 Y29257A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*12(SILVER 2) 4
12 H59145A AIR PANEL BOX 1
(Q07009001)
(PL-CENL2500-22)
SPLASH GUARD P-17
<Left side cover + 10-inch hollow chuck (NL2500/700, NL2500S/700)>
9 1
#
16 10 2
& ∗ ∗% %
19 17 11 3
6 13
@ 7 14
12 5 4
% ∗% ∗
8 15 18
NOTE (1) @: NL2500S/700

(2) #: 10-inch solid chuck
(3) &: Hollow chuck (HOWA)
(4) %: Hollow chuck (KITAGAWA, MATSUMOTO)
(5) ∗: Hollow chuck (NIKKO)
(Q00706001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-18

1 H59115C LEFT SIDE COVER 1
2 H35886B COVER 1
3 H59104B CYLINDER COVER 1
4 H58314B LEFT SIDE COVER 1
5 H58538A LEFT SIDE COVER 1
6 H34514A LID 1
7 H97424A LID 1
8 H91962B LID 1
16 H35887A LID 1
18 H91963A LID 1
(Q00706001)
(PL-CENL2500-22)
SPLASH GUARD P-19
<Left side cover (NL2500/1250)>
9 5 6
1 8
4 7 10
(Q07010001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-20

1 H35887B LID 1
2 H34514A LID 1
3 X44931A HANDLE 1
(Q07010001)
(PL-CENL2500-22)
SPLASH GUARD P-21
<Cover (rear, turret, right saddle) (NL2500MC/700, NL2500S/700)>
∗ # 28 31 32 33 # ∗
48 4 44 5 11 50 14 15 16 6 49 8
35
17 37
18 38
A
9
29 12
36
41
10 20 21
30 13
34
40 7
39 19
24 22
52 51
42
3
1
2 M12
25 45
46 26
43 23
Datail of A
47 27
NOTE (1) ∗: NL1500, NL1500MC, NL1500S, NL1500SMC, NL2000, NL2000MC, NL2000S, NL2000SMC
(2) #: NL2500/700, NL2500MC/700, NL2500S/700, NL2500SMC/700
(Q00707001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-22
1 Y04045A HEXAGON SOCKET HEAD CAP BOLT M12*45 2 29 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 2
SCREW M5*7 (PARKER)
2 S00004A DEEP GROOVE BALL BEARING 6001DD 2
3 F30119A COLLAR 4
SCREW M5*7 (PARKER)
4 H73998B REAR COVER 1
5 H59035C REAR COVER 1
7 H70529B SADDLE COVER 1
8 H75466C TURRET COVER 1 SCREW M6*10 (PARKER)
9 H75469C TURRET COVER 1 35 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 3
10 H75468C CHIP COVER 1 SCREW M6*10 (PARKER)
11 X23293B SLIDE SEAL 1 36 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 4

SCREW M6*10 (PARKER)
12 X23383B SEAL 1
13 X23289B SLIDE SEAL 1 SCREW M6*12 (PARKER)
14 X22117A SEAL 1 38 Y21010A PAN HEAD SCREW M5*10 4
15 X23407A SEAL 1 39 Y20026A PAN HEAD SCREW M3*3 2
16 X24777A SEAL 1 40 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 1
17 H58472B CHIP COVER 1 SCREW M6*10 (PARKER)
18 X23405B SEAL 1 41 Y02012A HEXAGON SOCKET HEAD CAP BOLT M8*12 4
19 H33972A PLATE 1 42 Y03030A HEXAGON SOCKET HEAD CAP BOLT M10*30 4
20 X24776A SEAL 1 43 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 4
21 Y21010A PAN HEAD SCREW M5*10 2 44 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 5
22 H58452A STAY 1 45 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 5
24 H78208B COVER 1 SCREW M6*10 (PARKER)
25 X23384B SEAL 1 47 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 2
26 X23404A SEAL 1 SCREW M6*10 (PARKER)
27 X23306B SEAL 1 48 H73990B REAR COVER 1
28 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3 49 U30877B PROTECTOR EM-20275 1
SCREW M5*7 (PARKER) 50 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 4
51 X42084A SUPPORT 1
(Q00707001)
(PL-CENL2500-22)
SPLASH GUARD P-23
<Cover (rear, turret, right saddle) (NL2500SY/700, NL2500Y/700)>
∗ # 42 45 43 67 68 69 ∗ #
79 4 12 70 15 5 13 71 37 38 39 6 78
19 49
18 48
8 82
9
A
46 16 10 74 75
11 41
25 55
47 17
76 77
73
72 44 14 7
66 36
51 20 50
81 80 65 35 62 32
26 56
64 34 61 31
3 40 54
1
21 60 30 27 57
63 33
2 M12
22
59 29 28 58
Detail of A 52
24
53 23
NOTE (1) ∗: NL1500SY, NL1500Y, NL2000SY, NL2000Y

(2) #: NL2500SY, NL2500Y
(Q00715001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-24
SCREW M5*7 (PARKER)
3 F30119A COLLAR 4
4 H73998B REAR COVER 1
8 H70528C COVER 1
9 H70523C TURRET COVER 1
11 H75649B COVER 1 55 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3
12 B63209A ANGLE 1 SCREW M5*7 (PARKER)
13 B63211A ANGLE 1 56 Y29330A HEXAGON SOCKET T 6RUSS HEAD MACHINE 6

SCREW M5*7 (PARKER)
14 N22085A JACK BOLT 2
15 X23288C SLIDE SEAL 1 SCREW M5*7 (PARKER)
17 X23289B SLIDE SEAL 1 SCREW M5*7 (PARKER)
SCREW M5*7 (PARKER)
21 H91959A LID 1 61 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3
22 H58452A STAY 1 SCREW M5*7 (PARKER)
23 H75660B SADDLE COVER 1 62 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3
SCREW M5*7 (PARKER)
24 H39292A LID 1
SCREW M5*7 (PARKER)
26 X23406B SEAL 2
27 X23408B SEAL 1 SCREW M5*7 (PARKER)
28 X23409B SEAL 1 65 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3
29 X23304B SEAL 1 SCREW M5*7 (PARKER)

SCREW M5*7 (PARKER)
33 X23306B SEAL 2
37 X22117A SEAL 1
41 Y00312A HEXAGON SOCKET HEAD CAP BOLT M5*12 2 75 Y28410A FLUSH HEAD SCREW M6*10 1
42 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 2 76 H33972A PLATE 3
43 Y01012A HEXAGON SOCKET HEAD CAP BOLT M6*12 2 77 Y20026A PAN HEAD SCREW M3*3 6
44 Y28412A FLUSH HEAD SCREW M6*12 2 78 U30877B PROTECTOR EM-20275 1
45 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 3 79 H73990B REAR COVER 1
SCREW M5*7 (PARKER) 80 X42084A SUPPORT 1
46 Y29330A HEXAGON SOCKET TRUSS HEAD MACHINE 4 81 Y01030A HEXAGON SOCKET HEAD CAP BOLT M6*30 3
SCREW M5*7 (PARKER)
(Q00715001)
(PL-CENL2500-22)
SPLASH GUARD P-25
<Right front door (NL2500/700)>
1 8 6
2
4
3
M10
M12
5
Detail of A 7 Detail of B
19 14 15 16
12
A
18 10
17 11
20 13
B 21
(Q00708002 2005.03.29)
(PL-CENL2500-22)
SPLASH GUARD P-26

3 F30119A COLLAR 2
5 F46053A COLLAR 2
7 F30146A COLLAR 2
8 F43126A COLLAR 2
9 H78214C FRONT COVER 1
10 H78216A COVER 1
11 H78215A COVER 1
12 E66562A SAFETY SWITCH HS1E-7KLMBP-1-TK2213 1
13 X44637A HANDLE 1
14 B51357A BRACKET 1
16 X48249A CLAMPING PLATE 1
17 Y29321A COUNTERSUNK HEAD SCREW M5*8(COOL SILVER) 4
21 H63150A ANGLE 1
(Q00708002)
(PL-CENL2500-22)
SPLASH GUARD P-27
<Right front door (NL2500/1250)>

20
30
21 27
22
29
Detail of A Detail of B
17 8 2 3 13 15 10
13
24
A
8 16
25 18 4
5
14
9
23
2
7
5
1
26
12 12 28
B
12
19 11 6
(Q07007001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-28

1 X44637A HANDLE 1
2 X38004A SQUARE RUBBER 1
4 H78392A FRONT DOOR 1
9 W14045A IMPACT RESISTANT VIEWING WINDOW 400*520*t=24 1
11 B63289A ANGLE 1
13 H55011B STAY 1
14 H50385B DOG MOUNTING PLATE 1
15 N81104A PLATE NUT 1
16 E66164A SAFETY SWITCH HS1E-3KLMRP-1-TK2002 1
22 F30119A COLLAR 4
24 E66080A SAFETY SWITCH AT4/11-1/I/ZB 1
28 B69372A MOUNTING PLATE 2
29 G66040A PULLEY 2
(Q07007001)
(PL-CENL2500-22)
SPLASH GUARD P-29
<Left front door (NL2500/700)>
6
1
2 8
M10
3 4
M12
5
Detail of A
Detail of B
7
9 12 13 14 13 15 19 18 25
10
20
21
11
22
23 16 17 24
(Q00709002 2005.02.09)
(PL-CENL2500-22)
SPLASH GUARD P-30

3 F30119A COLLAR 2
5 G66074A PULLEY 2
7 F30146A COLLAR 2
8 F43126A COLLAR 2
9 H78210C FRONT DOOR 1
10 W14621A IMPACT RESISTANT VIEWING WINDOW 400*520*27 CLASS2 1
11 X44637A HANDLE 1
13 H74285A ANGLE 1
15 H74284A ANGLE 1
16 H58474A TRAVELING AREA COVER 2
17 B63179A ANGLE 1
20 H74286B FRONT DOOR 1
21 H78211C FRONT COVER 1
22 H78212B FRONT COVER 1
25 Y29299B COUNTERSUNK HEAD SCREW M5*8(DARK GRAY 2) 4
(Q00709002)
(PL-CENL2500-22)
SPLASH GUARD P-31
<Rear cover (NL2500/700)>
7 1 8 10 13
9 5
11
6 15
14
12
(Q00713001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-32

1 H58457A COVER 1
3 H59002B COVER 1
4 H58240B BRACKET 1
5 H59109A COVER 1
6 H35879A LID 1
7 X44931A HANDLE 2
(Q00713001)
(PL-CENL2500-22)
SPLASH GUARD P-33
<Rear cover (NL2500/1250)>

6
5
13
11
10
12
7
2
9
(Q07005001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-34

1 H59189A SUPPORT 1
4 X44931A HANDLE 4
5 H59192A COVER 1
6 H35879A LID 1
7 H58549A BRACKET 1
(Q07005001)
(PL-CENL2500-22)
SPLASH GUARD P-35
<Tailstock front cover (NL2500/1250)>
2 17
1
3
9 4
6 15
23 13
24 14
10
22 12
20 8
21 11
19 7
5
18
16
(Q07008001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-36

4 H78385A TAILSTOCK COVER 1
5 H58572A COVER 1
7 X22093B SEAL 1
8 X23300A SEAL 1
9 H58571A BASE 1
11 X26089A SEAL 1
12 X26090A SEAL 1
13 X26092A SEAL 1
14 X26091A SEAL 1
15 X26093A SEAL 1
16 H75778A LID 1
17 H59210A OIL PAN 1
18 A24106A BASE 1
(Q07008001)
(PL-CENL2500-22)
SPLASH GUARD P-37
<Operation panel cover (NL2500/1250)>

∗
16
13
∗
25 17
∗ ∗
11 26 27
22
19
21
20
12
∗
24
10
9
14
15
5 4
18
23
NOTE
∗: Used only for automatic door specification
(Q07002001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-38

1 H78387A COVER 1
2 X44637A HANDLE 2
3 H67188A DUCT 1
4 H58569A BRACKET 1
5 S15490A LINEAR GUIDE SSR20XW2UU+1120L 4
7 B51357A BRACKET 1
12 H65042C OPERATION BOX 2
13 E75175A SADDLE RQSD-P29 2
14 Y90095A HANDLE SK53W 1
18 B41703A CLAMPING PLATE 1
19 H65043B OPERATION BOX 1
22 H67193A COVER 1
23 B63220A TRANSIT CLAMP(STEEL) FOR SHIPMENT 1
24 H78402A SAFETY COVER 1
(Q07002001)
(PL-CENL2500-22)
SPLASH GUARD P-39
<Bed mounting cover (NL2500/1250)>

1 2
3 4
50
5 6
46 47
44 45 49 48 8 9
7
43 42
10
41
40
39
38 11 12
37 36
35 34
33 32
31 30
29 13
28
14
27 26
25 15 16
24 23
17 18
22 21
20 19
51
62 61
60 59
58
57 56
52 53
55 54
(Q07012001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-40
1 B63117B BRACKET 1 32 H59184B CHIP COVER 1
SCREW M8*12(SILVER 2)
3 X48462D GUIDE 1
5 B63116A BRACKET 1
36 H02305B OILTANK 1
38 P30602A PLUG 3/8 2
8 B88411B PIPE 1
40 H02306B LID 1
10 B63132B ANGLE 2
11 A34401A BRACKET 1
42 U27015A CYCLE PUMP LCB4-8298E 1
43 U27016A CYCLE PUMP LCB4-8299E (8299 R3) 1
44 H58543A COVER 1
15 R20260A PIN 1
46 H67170A ANGLE 1
48 B45404C BLOCK 2
SCREW M8*12(SILVER 2) 49 Y04030A HEXAGON SOCKET HEAD CAP BOLT M12*30 4
19 B27144B PLATE 10 50 B08000A HOOK 3
20 N22083A JACK BOLT 10 51 B76479A BRACKET 1
21 S15447A LINEAR GUIDE SHS35LR2QZSSC0E+1960 2 52 A26128A BRACKET 1
23 B42396A BLOCK 1 54 H56829A DUCT 1
25 H33972A PLATE 2 56 A34375A BRACKET 2
26 B47355A BLOCK 1 57 Y06055A HEXAGON SOCKET HEAD CAP BOLT M16*55 4
27 Y07070A HEXAGON SOCKET HEAD CAP BOLT M20*70 4 58 A01297B BED 1
28 H75439B CHIP COVER 3 59 H56826B DUCT 3
29 H75757B CHIP COVER 1 60 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 6
30 X48463B GUIDE 2 61 H67162A DUCT 1
(Q07012001)
(PL-CENL2500-22)
SPLASH GUARD P-41
<Duct cover (NL2500/1250)>

1 2 12 6 7 3 13 9 11 10 4 5 8
(Q07013001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-42

3 H67182B DUCT 1
5 H67061A ANGLE 1
6 H58552A COVER 1
8 H66259A ANGLE 1
9 H62005A LID 1
10 B13270A BLOCK JOINT 4
(Q07013001)
(PL-CENL2500-22)
SPLASH GUARD P-43
<Headstock cylinder cover (NL2500/1250)>
1 7
2 9
8 6
(Q07014001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-44

1 H59265A DUCT 1
2 H59266A DUCT 1
4 W10057A RUBBER FC-779-2-2(L=620MM) 2
5 W10060A RUBBER FC-779-2-2(L=940MM) 1
6 H59240A LID 1
(Q07014001)
(PL-CENL2500-22)
SPLASH GUARD P-45
<Chip chuter (NL2500/700, NL2500S/700)>
14 9
1 5
2 6
@ @ @ @
10 11 12 13 19 20 21
∗ ∗
17 18
8 4
7 3
15
∗
16
∗
NOTE (1) @: NL2500S/700

(2) ∗: No chip conveyor
(Q00714001 2004.05.25)
(PL-CENL2500-22)
SPLASH GUARD P-46

9 H75800B COVER 1
14 B76453C BRACKET 1
16 H75800B COVER 1
17 H62016B LID 1
(Q00714001)
(PL-CENL2500-22)
SPLASH GUARD P-47
<Chip chuter (rear disposal)>

20 19
21
2 3 4 5 6 7 ∗ 8
10
11
Rear
13
18
Front
1 17 16 15 14 22 12
NOTE
∗: NL2500S/700, NL2500SMC/700, NL2500SY/700
(Q00746002 2004.09.22)
(PL-CENL2500-22)
SPLASH GUARD P-48

1 H75865A OIL PAN 1
4 B42408A BLOCK 2
5 H66293A LID 2
10 B13273A BLOCK JOINT 2
11 P30604A PLUG 3/4 6
12 H75867A COOLANT TANK COVER 1
13 P31011A HOSE JOINT 103419 1
14 H62067A PLATE 1
15 X32734A SEAL 1
16 H75866A BRACKET 4
18 P31059A HOSE JOINT 1036 19 1
19 H75869A LID 2
20 H75870A LID 1
22 H97470A COVER 1
(Q00746002)
(PL-CENL2500-22)
SPLASH GUARD P-49
<Coolant tank (rear disposal)>
10
12 11
13
14
15
17
18
16
(Q00747003 2005.11.11)
(PL-CENL2500-22)
SPLASH GUARD P-50

1 U10293B CHIP CONVEYOR PA-01109.R4 1
2 E55508F COOLANT PUMP MTH2-60/3 1
3 E55503G COOLANT PUMP MTH2-60/6 1
4 H02376C LID 1
5 H38572A LID 2
6 H21500A FILTER 1
7 H21499A FILTER 1
8 E75637A SADDLE SD-28 1
9 W14500A OIL CUP 1
12 H02375B COOLANT TANK 1
13 H02377B LID 1
14 P34042A VALVE 1
15 P34496A JOINT 1
16 H67087A ANGLE 1
18 H57049A COVER 4
(Q00747003)
(PL-CENL2500-22)
SPLASH GUARD P-51
Loader Type
<Front cover>
11 3
12 4 1
2 10
7 9
(Q00837001 2004.11.16)
(PL-CENL2500-22)
SPLASH GUARD P-52

1 H59306A FRONT COVER RAIL 1
2 B63343A GUIDE 1
4 H34546A PLATE 1
9 Y29275A COUNTERSUNK HEAD SCREW M5*8(SILVER 2) 4
11 Y29127A TORX SCREW M6*16TORX 2
(Q00837001)
(PL-CENL2500-22)
SPLASH GUARD P-53
<Right front door>
9 12
8 11 19
10 3
18 15 13 14 16 17
1
Detail of A
20
(Q00827002 2005.09.28)
(PL-CENL2500-22)
SPLASH GUARD P-54

1 B51357A BRACKET 1
5 F30119A COLLAR 2
8 H59257B COVER 1
9 H59267A LID 1
13 F46053A COLLAR 2
14 F30146A COLLAR 2
15 F43126A COLLAR 2
20 H63150A ANGLE 1
(Q00827002)
(PL-CENL2500-22)
SPLASH GUARD P-55
<Left front door>
19 3
18 2
B
4
26 12
7 22 17 16 15 14
27 13
23 24
Detail of A
5 20 9
10
6 21 11
A
Detail of B
25 8
(Q00836002 2005.02.09)
(PL-CENL2500-22)
SPLASH GUARD P-56

2 H58610A BRACKET 1
3 H66279A BRACKET 1
4 W14621A IMPACT RESISTANT VIEWING WINDOW 400*520*27 CLASS2 1
5 H58474A TRAVELLING AREA COVER 1
6 B63179A ANGLE 1
11 F30119A COLLAR 2
15 F30146A COLLAR 2
16 G66074A PULLEY 2
17 F43126A COLLAR 2
22 Y60110A HEXAGON NUT M10-1 2
23 X44637A HANDLE 2
(Q00836002)
(PL-CENL2500-22)
SPLASH GUARD P-57
<Rear cover>
11 12
6 5
1 7
9 4
∗ 8
13
10
NOTE
∗: Rear disposal specification
(Q00842001 2004.11.16)
(PL-CENL2500-22)
SPLASH GUARD P-58

1 H58607A BRACKET 1
2 H58240A BRACKET 1
3 H59002A COVER 1
5 H58457A COVER 1
11 H35506A LID 2
(Q00842001)
(PL-CENL2500-22)
SPLASH GUARD P-59
<Right side cover>

∗ #
#
# ∗
# 1 2
17
16
15 14 13
# ∗
12 11 10
9 8 7
6 5 4
NOTE (1) ∗: NL1500 - NL2500

(2) #: NL1500S - NL2500S
(Q00832001 2004.11.16)
(PL-CENL2500-22)
SPLASH GUARD P-60

4 H75914A LID 1
5 X10371A PACKING 1
7 H34533A LID 1
8 X10369A PACKING 1
13 H59258A LID 1
17 H59292A LID 1
18 H59292A LID 1
(Q00832001)
(PL-CENL2500-22)
SPLASH GUARD P-61
<Left side cover (NL2500/700)>
5
2
3
∗
4
NOTE
∗: NL1500S - NL2500S
(Q00841001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-62

2 H35887B LID 1
3 H58314B LEFT SIDE COVER 1
5 W10057A RUBBER FC-779-2-2(L=620MM) 1
6 H59370A DUCT 1
7 H59240A LID 1
8 H59238A DUCT 1
(Q00841001)
(PL-CENL2500-22)
SPLASH GUARD P-63
<Ceiling cover (NL2500/700)>
13 15 29
14
16 30
17
27 11
19 32
18 31
20 33
2 21
10
1
12 28
8 25
23 6
9 26 3 22
24 7
4
5
(Q00840001 2007.06.04)
(PL-CENL2500-22)
SPLASH GUARD P-64

1 H59300A TOP COVER 1
2 U41480A AIR CYLINDER HCM-LB-32B ST=420 2
3 H59259A COVER 1
4 H59302A OIL PAN 1
5 H39300A LID 1
6 X26129A SEAL 1
7 X26128A SEAL 1
8 X26100A SEAL 1
9 X26099A SEAL 1
11 B88449A STAY 1
12 S15421A LINEAR GUIDE SSR20XV4SS+1960 1
14 H34530A COVER 1
15 H58293A RAIL 1
17 E66259A PROXIMITY SWITCH TL-M2MD1-2 2
18 H13328B PROXIMITY SWITCH MOUNTING PLATE 2
19 E66093B SAFETY SWITCH AT0-11-1-ZB 2
20 H59305A ANGLE 1
23 Y29184A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M5*8(PARKER) 4
(Q00840001)
(PL-CENL2500-22)
SPLASH GUARD P-65
<Shutter>
17 8 11 20 12
10 19
5 9 18
37 36 38 35
1 28 27 30 29 26
13
7
6 3 14
16
32 23
4 15
Left Side View
25
33 24
22
26 34
Right Side View
22 21 31
(Q00839001 2004.11.16)
(PL-CENL2500-22)
SPLASH GUARD P-66

1 B43307A BLOCK 1
2 S16000A CAM FOLLOWER CF6-28BUUE04 2
4 B43308A BLOCK 1
5 H59303A SHUTTER 1
6 H59322A ANGLE 1
8 B88493A BRACKET 1
12 U41171A FLOATING JOINT FJ-F-10 1
21 B43307B BLOCK 1
22 S16000A CAM FOLLOWER CF6-28BUUE04 2
24 B43308B BLOCK 1
25 H59323A ANGLE 1
30 U41171A FLOATING JOINT FJ-F-10 1
(Q00839001)
(PL-CENL2500-22)
SPLASH GUARD P-67
<Chuck cover>
2 22
15 14 13
3 23
17 16
4 24
19 18
20 12
@ ∗ #
32 33 34 35
# ∗ @
41 40 39 38
31 11
5 25
21 17
6 26
∗ ∗
37 36
30 10
7 27
29 9 8 28
NOTE (1) ∗: NL1500

(2) #: NL2000
(3) @: NL2500
(Q00825003 2005.04.14)
(PL-CENL2500-22)
SPLASH GUARD P-68

1 H71352C CHUCK COVER 1
3 X23294B SEAL 1
4 X23295B SEAL 1
5 X23296B SEAL 1
6 X22091B SEAL 1
7 X23297B SEAL 1
8 X22092B SEAL 1
9 X22093B SEAL 1
10 X26151A SEAL 1
11 X23300A SEAL 1
12 X26098B SEAL 1
13 E36167A LAMP 037 656 001 1
18 X22128A SEAL 1
32 H71334A COVER 1
34 H71296B COVER 1
35 H71295B COVER 1
37 H71336B COVER 1
38 H71418A COVER 1
40 H71416A COVER 1
41 H71417A COVER 1
(Q00825003)
(PL-CENL2500-22)
SPLASH GUARD P-69
<Traverse rail cover (AI specification)>
1 2
19
6 7
8 9
4 3
16
14 13
10 11
15
17 18
12
(Q07204001 2006.05.11)
(PL-CENL2500-22)
SPLASH GUARD P-70

6 H34465B COVER 1
10 H76440B TRAVELING AREA COVER 1
13 Y90050A HOOK J-H2.30S 1
15 H76479A LOADER COVER 1
17 H11330A TERMINAL BOX MOUNTING PLATE 1
19 H76488A TRAVELING AREA COVER MOUNTING PLATE 1
(Q07204001)
(PL-CENL2500-22)
SPLASH GUARD P-71
<Traverse rail cover (AII specification)>
1 2
5 6
7 8
3 15 21 22
∗
12 13 14
∗
11 10 9
∗
17 16
18 19 20
∗: For back-to-back hand

NOTE
(Q07205001 2006.05.11)
(PL-CENL2500-22)
SPLASH GUARD P-72

5 H34465B COVER 1
16 Y90050A HOOK J-H2.30S 1
(Q07205001)
(PL-CENL2500-22)
SPLASH GUARD P-73
<Traverse rail cover (AIII specification)>
23 22
1 2
∗
6 7
8 9
4 3
13 14 15
∗
16
18 17
19
20 21
12 11 10
∗

NOTE
(Q07206001 2006.05.11)
(PL-CENL2500-22)
SPLASH GUARD P-74

6 H34465B COVER 1
17 Y90050A HOOK J-H2.30S 1
(Q07206001)
(PL-CENL2500-22)
SPLASH GUARD P-75
<Traverse rail cover (AIV specification)>
23 22 1 2
∗
5
6 7
8 9
16
4 3
13 14 15
∗
12 11 10
∗
18 17
19
20 21

NOTE
(Q07207001 2006.05.11)
(PL-CENL2500-22)
SPLASH GUARD P-76

6 H34465B COVER 1
17 Y90050A HOOK J-H2.30S 1
(Q07207001)
(PL-CENL2500-22)
SPLASH GUARD P-77
<Traverse rail cover (separated type)>

6
5 13
18
21
10
1
7
8
14
11 For back-to-back hands
19 For parallel hands
12

15
17
16
(Q11180002 2006.08.29)
(PL-CENL2500-22)
SPLASH GUARD P-78

1 H76615A02 TRAVELING AREA COVER 1
7 Y90050A01 HOOK J-H2.30S 1
8 Y29305A01 HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M4*8(COOL SILVER) 2
9 B88968A02 BRACKET 1
14 H11330A02 TERMINAL BOX MOUNTING PLATE 1
17 H34465B02 COVER 1
(Q11180002)
(PL-CENL2500-22)
WORK UNLOADER
WORK UNLOADER P-1
30
37
38
31
54 NL3000
20 21 22 23 24 25 26 27 28 29 NL1500 - NL2500
32
1
2
33
B 34
35
A A
Terminal box
36 NL1500 - NL2500/700
55 NL2500/1250
B 56 NL3000/700
19
57 NL3000/1250
17
18 62 41 43 44
16
4
12
NL1500 - NL2500/700 7
13
8
14
9
15
10
NL2500/1250 58
NL3000/700 59
NL3000/1250 60
11
64 63 39 66 65 42 40
53
61
(Q00725002 1/2 2006.02.10)
(PL-CENL2500-12)
WORK UNLOADER P-2
54 NL3000
46 44 20 45 46 29 NL1500 - NL2500 51
Section B-B
50 52 48 49 21 47
19
Section A-A
(Q00725002 2/2 2006.02.10)
(PL-CENL2500-12)
WORK UNLOADER P-3
1 H58491A COVER 1 33 Y34016A FLAT POINT SOCKET SET SCREW M10*16 2
2 Y29185A HEXAGON SOCKET TRUSS HEAD MACHINE 2 34 B60248A KEY 1
SCREW M6*10(PARKER) 35 Y00125A HEXAGON SOCKET HEAD CAP BOLT M4*25 2
3 H34508A PLATE 1 36 B79843A ARM 1
4 Y13020A HEX. HEAD BOLT M10*20 1 37 R34000A PIN 2
5 Y60110A HEXAGON NUT M10-1 1 38 Y22014A PAN HEAD SCREW M8*14 2
6 B41679A STOPPER 1 39 X48552A PLATE 1
7 B79844B BASE 1 40 X48550A PLATE 1
8 Y04040A HEXAGON SOCKET HEAD CAP BOLT M12*40 4 41 X48551A PLATE 1
9 Y70012A CIRCULAR WASHER M12 4 42 Y28004A FLUSH HEAD SCREW 3
10 Y71012A SPRING WASHER M12 4 43 H58490A RECEIVER BOX 1
11 U40648A SHOCK ABSORBER PM100MF-3B 1 44 F34145A COLLAR 1
12 U41449A AIR CYLINDER SCM-OO-63B-118-T0V3- 1 45 F34144A COLLAR 1
13 Y03035A HEXAGON SOCKET HEAD CAP BOLT M10*35 4 46 S00103A DEEP GROOVE BALL BEARING 6008DDU 2
14 Y70010A CIRCULAR WASHER M10 4 47 F64142A SLEEVE 1
15 Y71010A SPRING WASHER M10 4 48 R20028A SHAFT 4
16 N21025A HEX. HEAD BOLT 1 49 Y32006A FLAT POINT SOCKET SET SCREW M6*6 4
17 B11229A BLOCK JOINT 1 50 Y62404A KMT NUT KMT5(M25*1.5) 1
18 Y70020A CIRCULAR WASHER M20 1 51 Y64024A KEY 6*6*23 1
19 G22169A RACK 1 52 N71006A LOCK NUT 1
20 G21049A PINION 1 53 P18516A AIR TUBE UQ08-2FB,BR L=6000MM 1
21 A32113A BEARING BASE 1 54 R07084A SHAFT 1
22 Y02035A HEXAGON SOCKET HEAD CAP BOLT M8*35 4 55 B88453A ARM 1
23 Y70008A CIRCULAR WASHER M8 4 56 B88454A ARM 1
24 Y71008A SPRING WASHER M8 4 57 B88457A ARM 1
25 Y64022A KEY 6*6*36 1 58 B88455A BASE 1
26 F56301A LID 1 59 B88456A BASE 1
27 Y01020A HEXAGON SOCKET HEAD CAP BOLT M6*20 3 60 B88458A BASE 1
28 S20032A DUST SEAL DSI303856.5 1 61 U40089A SPEED CONTROLLER SC3W-8-8 2
29 R07083A SHAFT 1 62 Y28004A FLUSH HEAD SCREW 3
30 H58485A BOX 1 63 X48682A PLATE 1
31 R21171A RING 1 64 Y28004A FLUSH HEAD SCREW 2
32 Y69151A COTTER PIN φ2.5*15 1 65 X48626A PLATE 1
66 Y28004A FLUSH HEAD SCREW 2
(Q00725002)
(PL-CENL2500-12)
WORK UNLOADER P-4
<Work receiver (NL2500/700, NL2500/1250)>

2
10
4 1
7 8
14 15 16
11 12 13
(Q00727002 2004.09.14)
(PL-CENL2500-02)
WORK UNLOADER P-5

2 H58487A RECEIVER BOX 1
4 H29055A STOPPER 1
5 X48566A PLATE 1
6 X48564A PLATE 2
7 X48565A PLATE 2
13 Y60006A HEXAGON NUT M6 4
14 X32274A RUBBER 1
15 H91971A LID 1
(Q00727002)
(PL-CENL2500-02)
WORK UNLOADER P-6
<Work receiver (chip conveyor rear disposal specifications)>
3
17
10
4 1
7 8
14 15 16
11 12 13
(Q07262001 2006.06.20)
(PL-CENL2500-15)
WORK UNLOADER P-7

2 H1D412A RECEIVER BOX 1
4 H29055A STOPPER 1
5 X48566A PLATE 1
6 X48564A PLATE 2
7 X48565A PLATE 2
13 Y60006A HEXAGON NUT M6 4
14 X32274A RUBBER 1
15 H91971A LID 1
17 H21663A PUNCHING PLATE 1
(Q07262001)
(PL-CENL2500-15)
WORK UNLOADER P-8
<Work transfer conveyor>

55 19
13 42 16 45 21 20 38 11
A
46
18 37 25 Rear disposal type
54
chip conveyor only
22
24
36 13
30 17
10
27
23 7 NL1500, NL2000 35 16
52 31 12 33 14
8 NL2500, NL3000 47
53
34
6
49
2 14
44
4
34 15
52
5
5
51
26
50
48 29 39 32
50
40 9 6 30 Section B-B
3
Section A-A
(Q00785003 2005.06.10)
(PL-CENL2500-15)
WORK UNLOADER P-9
1 B18019A SPECIAL JOINT 3 29 S00006A DEEP GROOVE BALL BEARING 6002DD 2
2 B63310A BRACKET 1 30 S00011A DEEP GROOVE BALL BEARING 6005DD 2
3 E55431A GENERAL MOTOR M91X40GK4L 1 31 W00004A BELT M-250 110*3330 1
4 E55432A GENERAL MOTOR MX9G180B 1 32 X44281A PLATE 1
5 F54161A COLLAR 2 33 X48595A PLATE 1
6 F66229A FLANGE 2 34 X48596A GUIDE 2
7 H02372A BOX 1 35 X48597A CLAMPING PLATE 2
8 H02541A WORKPIECE BUCKET 1 36 X48598A PLATE 1
9 H03287B MOTOR COVER 1 37 X48624A PLATE 1
10 H21479A CHIP BUCKET 1 38 X48792A PLATE 1
11 H21572A BUCKET 2 39 Y00312A HEXAGON SOCKET HEAD CAP BOLT M5*12 18
12 H29164A COVER 1 40 Y01060A HEXAGON SOCKET HEAD CAP BOLT M6*60 4
13 H29309C OIL PAN 1 41 Y02025A HEXAGON SOCKET HEAD CAP BOLT M8*25 2
14 H29310B COVER 1 42 Y09214A HEXAGON SOCKET HEAD CAP BOLT M6*14 10
15 H29311A COVER 1 43 Y28208A FLUSH HEAD SCREW M5*8 31
16 H29312B COVER 1 44 Y28210A FLUSH HEAD SCREW M5*10 12
17 H29317B COVER 1 45 Y29311A HEXAGON SOCKET TRUSS HEAD MACHINE 20
SCREW M6*12(COOL SILVER)
18 H29320A COVER 1
19 H57080A PLATE 1
20 H57081A PLATE 1
47 Y70006A CIRCULAR WASHER M6 4
21 H63274A COVER 1
48 Y71006A SPRING WASHER M6 4
22 P29213A BRAID HOSE φ19*1000 1
23 P30603A PLUG 1/2 1
24 P31514A HOSE BAND HS-12 3
51 Y81060A CHAIN RS40EΛ-1 40L 1
25 R23161A SHAFT 1
52 Y81061A SPROCKET RS40 1B12TH12J 2
26 R24591A SHAFT 1
27 R39011A ROTOR 1
54 H62195A WIRING GUIDE 1
28 R39012A ROTOR 1
(Q00785003)
(PL-CENL2500-15)
WORK UNLOADER P-10
4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21
13 14
22
23 24 25
2
26
1
I 27
21
19 20
23
28
33 32
24
29
22 25
31 30
Section View 26
Detail of I
(Q07064002 1/2 2005.10.07)
(PL-CENL2500-15)
WORK UNLOADER P-11

1 F67534A BUSHING 1
2 K10031A HOLLOW CHUCK BB208A621 1
3 Y73086A COMPRESSION SPRING LR6*15 1
4 R21197A SHAFT 1
5 Y59674A SPRING PIN φ4*36 1
6 S20305A DUST SEAL SER-50 1
8 W07070A O RING G-70 1
9 F44175A BUSHING 1
11 F44176A BUSHING 1
12 R75133A DRAW PIPE 1
13 F83120A FLANGE 1
14 F67535A SUPPORTER 1
15 K20042A CHUCK CYLINDER SS1666C21A 1
17 F54219A SLEEVE 1
18 F63200A FLANGE 1
19 F52116A FLANGE 1
20 W07070A O RING G-70 1
21 F83321A FLANGE 1
22 S00140A DEEP GROOVE BALL BEARING 6905VV 1
23 F65180A FLANGE 1
24 F32024A COLLAR 1
26 R26254A SHAFT 1
27 P30337A ROTARY JOINT 1105-251-430 1
29 B18131A SPECIAL JOINT 1
30 H02409A TANK 1
31 H22351A WHIRL STOPPER 1
32 F67527A DISK 1
33 R00171A SPINDLE 1
(Q07064002 1/2)
(PL-CENL2500-15)
WORK UNLOADER P-12
φ8 air hose
A
1 17
7
∗2P2335001A
1 A
2 3 4 5 6 7
8 ∗
8
9 ∗
10
11 14
11
12
13
19 18 12 15 10
16 13
16
Section A-A 15 14
(Q07064002 2/2 2005.10.07)
(PL-CENL2500-15)
WORK UNLOADER P-13

1 F67527A DISK 1
2 K20042A CHUCK CYLINDER SS1666C21A 1
3 F54219A SLEEVE 1
5 F63200A FLANGE 1
6 F52116A FLANGE 1
7 B37059A BRACKET 1
8 P30337A ROTARY JOINT 1105-251-430 1
9 P31034A HOSE JOINT 9034 9 1
12 S15935A LINEAR GUIDE SSR15XW1SS+160LY 1
13 B52304A PLATE 1
14 B42480A BLOCK 2
15 U41564A AIR CYLINDER CMA2-LB-40-100-R0-3 1
18 U41867A AIR CYLINDER CMA2-LB-40-100-R0-3 1
19 E78130A CONNECTOR PART XS2G-D4S1 2
(Q07064002 2/2)
(PL-CENL2500-15)
WORK UNLOADER P-14
1 2
View
NOTE (1) Assembly diagram of work unloader bucket for small diameter workpieces
(2) This will be included with shipment as a standard accessory
(Q07130001 2005.12.12)
(PL-CENL2500-15)
WORK UNLOADER P-15

1 H29367A COVER 1
2 X48842A PLATE 1
(Q07130001)
(PL-CENL2500-15)
LOADER
LOADER P-1
<Traverse rail AI specification>

5
4
17 21
8
18
19
20
13
12
15
22
28
27
25
31
30
24
29
26
1
7
6
11 10
14 3
(Q11128001 2005.01.24)
(PL-CENL2500-04)
LOADER P-2

1 B76519B Z-AXIS RAIL 1
2 G22227A RACK 2
3 S15317A LINEAR GUIDE SHS30LR2QZUU+3150L 2
5 Y52540A TAPER PIN 8*40(Threaded) 4
6 X32634A RUBBER 2
7 B47526A STOPPER 2
12 H10454A DUCT 1
18 H56592A CABLE CONDUIT CLAMP 1
25 B44126A BLOCK 2
29 Y60010A HEXAGON NUT M10(P=1.25) 2
(Q11128001)
(PL-CENL2500-04)
LOADER P-3
<Traverse rail AII specification>
18 13
22 15 14
19 20 12
5 4 2
25 27 28
3 14
24 30 31
29
26
17 21 15 8
1
11 6
7 10
(Q11186001 2006.03.27)
(PL-CENL2500-13)
LOADER P-4

1 B76519B Z-AXIS RAIL 1
2 G22227A RACK 2
6 X32634A RUBBER 2
7 B47526A STOPPER 2
12 H10454A DUCT 1
25 B44126A BLOCK 2
29 Y60010A HEXAGON NUT M10(P=1.25) 2
(Q11186001)
(PL-CENL2500-13)
LOADER P-5
<Traverse rail AIII specification>
3 27 28
12 26
6 23 24 25
34 35
28 27 2
22 21 31 8
20 4
10 29 30
9 32 33
7
20
1
24
25
26 11
5 32
(Q11187001 2006.03.27)
(PL-CENL2500-13)
LOADER P-6

1 B76523A Z-AXIS RAIL 1
2 G22226A RACK 1
3 G22227A RACK 2
4 S15581A LINEAR GUIDE SHS30LR2QZUU+4760LT 2
5 B47526A STOPPER 2
7 B88023A BRACKET 2
8 H10324A DUCT 1
9 B88056A BRACKET 2
10 B44126A BLOCK 2
11 X32634A RUBBER 2
35 Y60010A HEXAGON NUT M10(P=1.25) 2
(Q11187001)
(PL-CENL2500-13)
LOADER P-7
<Traverse rail AIV specification>
12 26
28 27 3
22 21 31 8
3 27 28
7 20 24 25
34 35
1 28 27 2
4 20
10
29
9 32 33 30
25 24 23 6
26 11
5 32
(Q11188001 2006.03.27)
(PL-CENL2500-13)
LOADER P-8

2 G22226A RACK 1
3 G22227A RACK 2
5 B47526A STOPPER 2
7 B88023A BRACKET 2
8 H10324A DUCT 1
9 B88056A BRACKET 2
10 B44126A BLOCK 2
11 X32634A RUBBER 2
35 Y60010A HEXAGON NUT M10(P=1.25) 2
(Q11188001)
(PL-CENL2500-13)
LOADER P-9
<Traveling (left side disposal)>

5
4
2 20
26
11
7
16
9 14
12
6
10
13
3
1
15
19
8
18
17
27
21
22
28
24
25
33
34
32
35
29
30
31
(Q11135001 2005.06.29)
(PL-CENL2500-13)
LOADER P-10

2 G22227A RACK 3
6 X32634A RUBBER 2
7 B47526A STOPPER 2
10 Y01012 4
11 H10324A DUCT 1
21 B46259A BLOCK 4
24 H76612A LID 1
27 B88948A LEG 2
28 B88953A PLATE 2
29 H76613A LID 4
30 B63603A PLATE 4
31 A28000A PLATE 4
33 Y19022A HEX. HEAD BOLT M16*70(12.9) 8
(Q11135001)
(PL-CENL2500-13)
LOADER P-11
<X-axis>
AI Specification
AII Specification
AI Specification
(Q11126005 1/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-12
15 26
16 28
2
4
6 28 30 34 35
8
17
9
32 31 28 1
17
18
4
5 28 36 37
33
4
15
19 27
6 28 30 34 35
29 20 15
17
12 For back-to-back hands 9
25 17
11 38 39 40 18
AI specification
NOTE
(Q11126005 2/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-13

1 A10100B X-AXIS BASE 1
2 F50164A BALL NUT MOUNTING FLANGE 1
4 N20205A HEX. HEAD BOLT 3
5 B43856A TENSION BLOCK 1
6 B42582A CHAIN SHAFT BASE 2
8 R24957A PULLEY SHAFT 2
9 G66100A SPROCKET 1
10 H76611A X-AXIS COVER 1
12 H76055B X-AXIS COVER 1
15 S15316B LINEAR GUIDE SHS15C2QZUU+870L 2
16 S31173A BALL SCREW BLK2020-7.2ZZ+778LT 1
19 Y82120A CHAIN RS50-2X104 1
20 S19510A ROLLER φ5*21.8 4
32 Y58025A STRAIGHT PIN 6*25 2
(Q11126005 2/7)
(PL-CENL2500-19)
LOADER P-14
40 20
50
19
57 52 45 16
40 28 56 43 15 18 55
21
17
34
52 45 26
35
51 41 3
36
32
45 6
29 13
44 14 33
41 10
32
8 49
48 44 7
53 48 42 1
63
64
31
2 45 47 52
11
27
12
54
30
34
40
AI specification
NOTE
(Q11126005 3/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-15
1 A10101D X-AXIS BASE 1 30 S15316B LINEAR GUIDE SHS15C2QZUU+870L 2
2 B41843B CHAIN MOUNTING PLATE 1 31 S31173A BALL SCREW BLK2020-7.2ZZ-778LT 1
3 H96738A X-AXIS CABLE BRACKET 1 32 S03478A ANGULAR CONTACT BALL BEARING 1
4 N20205A HEX. HEAD BOLT 2 7302BT1DB GH/P5
5 H76054B X-AXIS COVER 1 33 S20179A OIL SEAL AG1311A0 1
6 A34588A MOTER MOUNTING BRACKET 1 34 Y62025A LOCK NUT AN02(M15 P=1.5) 3
7 B05309A HOLDER 1 35 Y72002A BEARING LOCK WASHER AW-02 1
8 F63310B FLANGE 1 36 W01118A TIMING BELT 450-5GT-20 1
9 F43271A COLLAR 1 40 Y29306A HEXAGON SOCKET TRUSS HEAD MACHINE 10

10 X32633A RUBBER 1
12 H38582A STOPPER 1
13 F30467A COLLAR 1
14 B44376A BRAKE MOUNTING BLOCK 2
15 B50201A BRAKE MOUNTING PLATE 1
16 B41847A MOTER MOUNTING PLATE 1
17 F30415A BRAKE COLLAR 1
19 H38583A FLANGE 1
20 H03431A BRAKE COVER 1
21 G68435A TIMING PULLEY P32-5GT-20-33F 1
26 E46421A X-MOTOR HC153S+OSA253S2 1
27 S19510A ROLLER φ5*21.8 4
63 Y63400A KEY 4*4*11 1
64 Y63710A KEY 5*5*25 1
(Q11126005 3/7)
(PL-CENL2500-19)
LOADER P-16
18
17
9
17
27 19
6 28 30 34 35 15 26
28 16
4 2
33
18
17
17
35 34 30 28 6
37 36 28 5
15
1 28 31 32
29 20
15
11 38 39 40

25
AII specification
NOTE
(Q11126005 4/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-17

1 A10100A X-AXIS BASE 1
2 F50164A BALL NUT MOUNTING FLANGE 1
5 B43856A TENSION BLOCK 1
6 B42582A CHAIN SHAFT BASE 2
8 R24957A PULLEY SHAFT 2
16 S31173A BALL SCREW BLK2020-7.2ZZ+778LT 1
19 Y82120A CHAIN RS50-2X104 1
20 S19510A ROLLER φ5*21.8 4
40 Y02025A EXAGON SOCKET HEAD CAP BOLT M8*25 4
(Q11126005 4/7)
(PL-CENL2500-19)
LOADER P-18
40 20 50
19
57 52 45 16
56 43 15
18 55
28 40 17
21
34
35
52 45 26
36
3 41 51
44 14 32
13
29 33
45 6
4
9
41 10
32
8 49
52 47 45 2 48 44 7
63
64
31
1 42 48 53
11
54 27
12
30
34
40
AII specification
NOTE
(Q11126005 5/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-19
1 A10101D X-AXIS BASE 1 30 S15316B LINEAR GUIDE SHS15C2QZUU+870L 2
2 B41843B CHAIN MOUNTING PLATE 1 31 S31173A BALL SCREW BLK2020-7.2ZZ-778LT 1
3 H96685A X-AXIS CABLE BRACKET 1 32 S03478A ANGULAR CONTACT BALL BEARING 1
4 N20205A HEX. HEAD BOLT 2 7302BT1DB GH/P5
5 H76054B X-AXIS COVER 1 33 S20179A OIL SEAL AG1311A0 1
6 A34588A MOTER MOUNTING BRACKET 1 34 Y62025A LOCK NUT AN02(M15 P=1.5) 3
7 B05309A HOLDER 1 35 Y72002A BEARING LOCK WASHER AW-02 1
8 F63310B FLANGE 1 36 W01118A TIMING BELT 450-5GT-20 1
9 F43271A COLLAR 1 40 Y29306A HEXAGON SOCKET TRUSS HEAD MACHINE 10

10 X32633A RUBBER 1
12 H38582A STOPPER 1
13 F30467A COLLAR 1
14 B44376A BRAKE MOUNTING BLOCK 2
15 B50201A BRAKE MOUNTING PLATE 1
16 B41847A MOTER MOUNTING PLATE 1
17 F30415A BRAKE COLLAR 1
19 H38583A FLANGE 1
26 E46421A X-MOTOR HC153S+OSA253S2 1
27 S19510A ROLLER φ5*21.8 4
63 Y63400A KEY 4*4*11 1
64 Y63710A KEY 5*5*25 1
(Q11126005 5/7)
(PL-CENL2500-19)
LOADER P-20
17
17 11
9
21 8 10 17
2 15 16
3 18
4 18
5 18
6 19
7 20
(Q11126005 6/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-21

1 A10113C PLATE 1
2 B41842A PLATE 1
3 H10459A DUCT 1
4 H34954A LID 1
9 B41845B BLOCK 2
10 X48302B STOPPER 1
20 Y69048A RIVET #2*4.8 4
(Q11126005 6/7)
(PL-CENL2500-19)
LOADER P-22
9
10
11
8
1
(Q11126005 7/7 2006.11.14)
(PL-CENL2500-19)
LOADER P-23

1 A10113C PLATE 1
2 B41842A PLATE 1
3 H10452A DUCT 1
4 H34954A LID 1
9 B41845B BLOCK 2
10 X48302B STOPPER 1
20 Y69048A RIVET #2*4.8 4
(Q11126005 7/7)
(PL-CENL2500-19)
LOADER P-24
<Z-axis>
17
42
41
16
36
11
38
39
10
For NL2500/1250 46
For NL2500/700 32
40
35
27
28
30
24
19 For NL2500/700
23 47 For NL2500/1250
18
25
29
9
26
15
34
3 2
31 For NL2500/700
45 For NL2500/1250
4 14
20 7 1
NOTE
AI specification
(Q11127004 1/2 2007.02.28)
(PL-CENL2500-20)
LOADER P-25

1 A10049A PLATE 1
9 A10095A PLATE 1
10 B41846A BASE 1
11 H85767A COVER 1
16 G05369A SPUR GEAR 1
19 H85766B COVER 1
20 U05352A FLEXIBLE CONDUIT 240.03-055-20-2030.1 1
23 F56450A FLANGE 1
24 S00046A DEEP GROOVE BALL BEARING 6205ZZ 2
25 F32232A COLLAR 1
26 G21101A PINION 1
35 U49070A PNEUMATIC UNIT SET 3PA210-06-LSP-3 1
36 U40865A MANIFOLD BLOCK M4KB280-08-L-3-FL270 1
38 U40052A SILENCER SLW-8A 2
41 E46260A SERVOMOTOR A06B-0031-B175#0000 1
42 E68622A CONNECTOR SET CE05-8A24-10SG-B-BAS 2
47 H76614A COVER 1
(Q11127004 1/2)
(PL-CENL2500-20)
LOADER P-26
19
27
42 28
11 30
41
24
32 16
38 23
10
18 25
24
29
39
35 26
8 36
40
9
34
15
31 6
20
14
4 7
NOTE
AII specification
(Q11127004 2/2 2007.02.28)
(PL-CENL2500-20)
LOADER P-27

1 A10049A PLATE 1
9 A10095A PLATE 1
10 B41846A BASE 1
11 H76053A COVER 1
19 H76052A COVER 1
20 U05352A FLEXIBLE CONDUIT 240.03-055-20-2030.3 1
23 F56450A FLANGE 1
24 S00046A DEEP GROOVE BALL BEARING 6205ZZ 2
25 F32232A COLLAR 1
26 G21101A PINION 1
35 U49070A PNEUMATIC UNIT SET 3PA210-06-LSP-3 1
36 U40865A MANIFOLD BLOCK M4KB280-08-L-3-FL270 1
38 U40052A SILENCER SLW-8A 2
41 E46260A SERVOMOTOR A06B-0031-B175#0000 1
42 E68622A CONNECTOR SET CE05-8A24-10SG-B-BAS 2
(Q11127004 2/2)
(PL-CENL2500-20)
LOADER P-28
<Parallel hand>
(Q11050002 2004.12.09)
(PL-CENL2500-20)
LOADER P-29

1 A10092A CHUCK HOLDER 1
3 R54094A PIPE 2
4 F56455A CYLINDER 2
5 R23336A SHAFT 4
6 R20383A SHAFT 4
7 F43272A FLANGE 2
8 R31352A PISTON 2
9 N10098A HEXAGON SOCKET HEAD CAP BOLT 2
10 R30312A SHAFT 2
12 F66420A FLANGE 2
13 B19006A LEVER 6
14 R20384A SHAFT 1
15 F52229A FLANGE 1
16 B86143A HAND JAW 1
28 F77128A FLANGE 2
29 F50165A FLANGE 1
30 S30051A OILLESS BUSHING 70B-1215 8
31 W08075A O RING S-75 4
32 P31636A QUICK JOINT KJH04-01S 4
34 S20089A PACKING PDU-25Z 2
35 Y73097A COMPRESSION SPRING 4
36 S22076A PACKING PSD-80 2
37 R20165A SHAFT 6
51 W08018A O RING S-18 2
52 W06022A O RING P-22 2
(Q11050002)
(PL-CENL2500-20)
LOADER P-30
<Pallet>
12 9
10 28
8 20
25 24 22 7
5 22
6 23 24
3
11 21 26 27
(Q11052003 2005.12.12)
(PL-CENL2500-20)
LOADER P-31

1 B59330A02 BASE 1
2 R50055A02 PIPE 4
3 R24938A02 PIN 1
4 B59332A03 PLATE 1
5 B59329B01 PLATE 1
6 N20199A03 HEX. HEAD BOLT 3
7 F30170B02 COLLAR 3
8 R23330A02 PIN 2
9 R25394A03 GUIDE 3
10 B41848A03 BLOCK 3
11 F56453A09 FLANGE 3
12 B59331A02 PLATE 1
20 Y59041A R PIN D=1*5 2
(Q11052003)
(PL-CENL2500-20)
LOADER P-32
<Pallet positioning unit>
(Q11055004 2005.12.12)
(PL-CENL2500-20)
LOADER P-33

1 B56379A KNUCKLE 2
2 F74120B BLOCK 2
3 R20393A PIN 2
4 B88078B ARM 2
5 B59343B ARM 1
6 B59344B ARM 1
7 F73259A FLANGE 2
8 R23345A SHAFT 4
9 H76122A COVER 2
14 U41762A AIR CYLINDER SCM-00-32B-50-T0H5-D 2
15 * QUICK JOINT GWL4-6T 4
20 E65416A CABLE GLAND 153UM 4*4 2
21 E36303A CABLE GLAND PY16 2
22 E36311A CABLE GLAND 1420/16 2
(Q11055004)
(PL-CENL2500-20)
LOADER P-34
<10-station workstocker>
(Q11053004 2005.12.12)
(PL-CENL2500-20)
LOADER P-35
1 H76040B OIL PAN 1 58 Y49081A BOLT FJK12120 4
2 H85975B COVER 1 59 Y49401A ANCHOR BOLT C-12-100 4
3 H85990A COVER 3 60 S30353A OILLESS BUSHING GR6500160 16
4 H85982A COVER 2 61 S20022A DUST SEAL DKI162657 8
5 H76041A ANGLE 1 62 U21133A GEARED MOTOR RNFM01-20L-B-120 3
7 H76042A COVER 1 63 Y81118A SPROCKET RS401B12TH22J 2
8 H76043A COVER 1 64 Y81117A SPROCKET ID40C13D12 4
9 H76044A COVER 1 65 Y82117A CHAIN RS40-118L(JL+JL+OL) 2
10 H76045A COVER 1 66 E66123A PROXIMITY SWITCH TLW3MB1 5
11 H76046A COVER 2 67 E66119A PHOTOELECTRIC SWITCH HPA-T12 2
12 H85988A COVER 2 69 S00222A DEEP GROOVE BALL BEARING 6007DDU 2
13 H85992A COVER 2 70 S00045A DEEP GROOVE BALL BEARING 6005ZZ 2
14 H85951A COVER 2 71 Y62006A LOCK NUT AN-6 2
15 H85993A COVER 2 72 Y72006A BEARING LOCK WASHER AW-06 2
16 R24956A PIN 4 73 Y82121A CHAIN RF2050HPR-JL-80 1
17 H47047A LIMIT SWITCH MOUNTING PLATE 4 74 Y65032A KEY 2
18 H25280A DOG 2 75 Y69152A COTTER PIN 20
19 W18074A CASTER F1CC L=750 P=50 4 76 Y59663A SPRING PIN 20
20 B88024A PLATE 2 77 Y74025A EXTERNAL SNAP RING S-25(TH-O-25) 1
22 R21246A SHAFT 8 79 W18068A CASTER C-5L 80
23 R39119A HOUSING 8 80 N81161A PLATE NUT 8
25 H85987A COVER 2 82 Y74012A EXTERNAL SNAP RING S-12(TH-O-12) 8
26 B69910A BRACKET 2 83 Y64021B KEY 2
27 H25281A DOG 2 84 U40876A SOLENOID VALVE M4KB210-06-L-2-DC24V 1
31 R23331A SHAFT 2 87 Y01020A HEXAGON SOCKET HEAD CAP BOLT M6*20 8
33 F67631A HOUSING 1 89 * HEXAGON SOCKET HEAD CAP BOLT M8*100 12
34 R24959A DRIVE SHAFT 1 90 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 39
35 F55473A FLANGE 1 91 Y02025A HEXAGON SOCKET HEAD CAP BOLT M8*25 8
36 B67246A DOG 1 92 Y02030A HEXAGON SOCKET HEAD CAP BOLT M8*30 10
38 B41819A BASE 1 95 Y03030A HEXAGON SOCKET HEAD CAP BOLT M10*30 8
39 B41820A BASE 1 96 Y14650A HEX. HEAD BOLT 1
40 B43830A BLOCK 1 97 Y60108A HEXAGON NUT M8-1 12
42 R23330A PIN 20 99 Y71003A SPRING WASHER M3 8
43 H47053A PROXIMITY SWITCH MOUNTING PLATE 1 100 Y71006A SPRING WASHER M6 2
45 B88027A BASE 1 102 Y70003A CIRCULAR WASHER M3 8
46 R50054A PIPE 3 103 Y70006A CIRCULAR WASHER M6 20
47 B42583A BLOCK 4 104 Y31010A FLAT POINT SOCKET SET SCREW M5*10 8
48 B42571A BLOCK 5 105 Y29193A HEXAGON SOCKET TRUSS HEAD MACHINE 24
SCREW M6*8(MORI BLUE)
49 H76047A COVER 2
50 H85889A COVER 1
52 G04189B SPUR GEAR 1
109 Y62308A NYLON NUT M8(P=1.25) 6
54 H85991A COVER 1
55 Y49112A EYE BOLT M12 4
112 B88028B BASE 1
56 W18075A CASTER N0.105-FE 4
57 F30315A COLLAR 1
114 Y64700A KEY 1
(Q11053004)
(PL-CENL2500-20)
LOADER P-36
<20-station workstocker>
(Q11054004 2005.12.12)
(PL-CENL2500-20)
LOADER P-37
1 H85974C COVER 1 57 Y49051A BOLT C-275-A4 2
2 H85975B COVER 1 58 Y49081A BOLT FJK12120 4
3 H85990A COVER 3 59 Y49401A ANCHOR BOLT C-12-100 4
4 H85982A COVER 2 60 S30353A OILLESS BUSHING GR6500160 16
5 H85979A COVER 1 61 S20022A` DUST SEAL 16
6 H85980A COVER 1 62 U21133A GEARED MOTOR RNFM01-20L-B-120 3
7 H85981B COVER 1 63 Y81118A SPROCKET RS401B12TH22J 2
8 H85976A COVER 1 64 Y81117A SPROCKET ID40C13D12 4
9 H85977A COVER 1 65 Y82117A CHAIN RS40-118L(JL+JL+OL) 2
10 H85985A COVER 1 66 E66123A PROXIMITY SWITCH TLW3MB1 5
11 H85986A COVER 4 67 E66119A PHOTOELECTRIC SWITCH HPA-T12 2
12 H85988A COVER 2 69 S00222A DEEP GROOVE BALL BEARING 6007DDU 2
13 H85992A COVER 2 70 S00045A DEEP GROOVE BALL BEARING 6005ZZ 2
14 H85951A COVER 2 71 Y62006A LOCK NUT AN-6 2
15 H85993A COVER 2 72 Y72006A BEARING LOCK WASHER AW-06 2
16 R24956A PIN 4 73 Y82118A CHAIN RF2050HPR-JL-160 1
17 H47047A LIMIT SWITCH MOUNTING PLATE 4 74 Y65032A KEY 2
18 H25276A DOG 2 75 Y59041A R PIN D=1*5 40
19 W18073A CASTER F1CC L=2000 P=50 4 76 Y59663A SPRING PIN 40
20 B88024A PLATE 2 77 Y74025A EXTERNAL SNAP RING S-25(TH-O-25) 1
22 R21246A SHAFT 8 79 W18068A CASTER C-5L 80
23 R39119A HOUSING 8 80 N81161A PLATE NUT 16
25 H85987A COVER 2 82 Y74012A EXTERNAL SNAP RING S-12(TH-O-12) 8
26 B69910A BRACKET 2 83 Y64021B KEY 2
27 H25281A DOG 2 84 U40876A SOLENOID VALVE M4KB210-06-L-2-DC24V 1
32 R23332A SHAFT 2 89 H76041A ANGLE 1
33 F67631A HOUSING 1 90 Y02016A HEXAGON SOCKET HEAD CAP BOLT M8*16 79
34 R24959A DRIVE SHAFT 1 91 Y02025A HEXAGON SOCKET HEAD CAP BOLT M8*25 8
35 F55473A FLANGE 1 92 Y02030A HEXAGON SOCKET HEAD CAP BOLT M8*30 10
36 B67246A DOG 1 93 Y02050A HEXAGON SOCKET HEAD CAP BOLT M8*50 2
37 R24934A SHAFT 1 94 F30315A COLLAR 1
38 B41819A BASE 1 95 Y03030A HEXAGON SOCKET HEAD CAP BOLT M10*30 8
39 B41820A BASE 1 96 Y14650A HEX. HEAD BOLT 1
42 R23330A PIN 40 99 Y71003A SPRING WASHER M3 8
45 B88027A BASE 1 102 Y70003A CIRCULAR WASHER M3 8
46 R50054A PIPE 3 103 Y70006A CIRCULAR WASHER M6 20
47 B42583A BLOCK 4 104 Y31010A FLAT POINT SOCKET SET SCREW M5*10 8
48 B42571A BLOCK 5 105 Y29193A HEXAGON SOCKET TRUSS HEAD MACHINE 24
SCREW M6*8(MORI BLUE)
49 H85989A COVER 2
50 H85978A COVER 1
51 H85984A COVER 1
52 G04189B SPUR GEAR 1
109 Y62308A NYLON NUT M8(P=1.25) 6
54 H85991A COVER 1
55 Y49112A EYE BOLT M12 4
112 B88028B BASE 1
56 W18075A CASTER N0.105-FE 4
114 Y64700A KEY 1
(Q11054004)
(PL-CENL2500-20)
LOADER P-38
<Cover for right-side 10-station workstocker>
NOTE
The parts marked with an asterisk are not used for NL2500.
(Q11056004 2006.10.25)
(PL-CENL2500-20)
LOADER P-39

1 H76013B COVER 1
2 H76014B COVER 1
3 H76015B COVER 1
4 H76016B COVER 1
5 H76018A COVER 1
6 H76048A DOOR 1
7 H76049A COVER 1
8 H76050A COVER 1
9 H76051B RAIL 2
10 H85884A COVER 2
11 H85885A COVER 1
12 H85936A ANGLE 1
15 H96646A TRANSIT CLAMP(STEEL) FOR SHIPMENT 1
17 X40467B ACRYLIC RESIN PLATE 2
19 X40391A ACRYLIC RESIN PLATE 1
20 H76476A LID *
29 Y29094A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*12(IVORY) 42
33 S00072A MINIATURE BEARING 626ZZ 6
34 X44208A HANDLE 1
36 H85772A STOCKER COVER 1
40 B67250A BLOCK 1
41 Y90009A HINGE C-590 1
(Q11056004)
(PL-CENL2500-20)
LOADER P-40
<Cover for left-side 10-station workstocker>
NOTE
(Q11057006 2006.10.25)
(PL-CENL2500-20)
LOADER P-41

1 H76061A COVER 1
2 H76062A DOOR 1
3 H76063A COVER 1
4 H76064A DOOR 1
5 H76065A COVER 1
6 H76066A COVER 1
7 H76067A COVER 1
8 H76068A COVER 1
9 H76069A ANGLE 1
10 H76051B RAIL 2
11 H85884A COVER 2
12 H85885A COVER 1
21 Y29194A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M5*12(DARK GRAY) 6
29 X44208A HANDLE 1
31 Y29096A HEXAGON SOCKET TRUSS HEAD MACHINE SCREW M6*12(GRAY) 2
37 H76476A LID 1
40 B67250A BLOCK 1
41 Y90009A HINGE C-590 1
(Q11057006)
(PL-CENL2500-20)
LOADER P-42
<Cover for right-side 20-station workstocker>
NOTE
(Q11058007 2006.11.06)
(PL-CENL2500-20)
LOADER P-43

1 H76013B COVER 1
2 H76014B DOOR 1
3 H76020B LOADER COVER 1
4 H76019A DOOR 1
5 H76018A COVER 1
7 H76016B COVER 1
8 H76022B COVER 2
9 H76015B COVER 1
10 H85936A ANGLE 1
11 H85884A COVER 2
12 H85885A COVER 1
29 X44208A HANDLE 1
35 H76017A COVER 1
37 H76476A LID 1
40 B67250A BLOCK 1
41 Y90009A HINGE C-590 1
(Q11058007)
(PL-CENL2500-20)
LOADER P-44
<Cover for left-side 20-station workstocker>
NOTE
(Q11059007 2006.11.06)
(PL-CENL2500-20)
LOADER P-45

1 H76061A COVER 1
2 H76062A DOOR 1
4 H76267A DOOR 1
5 H76065A COVER 1
7 H76067A COVER 1
8 H76022B COVER 2
9 H76068A COVER 1
10 H76069A ANGLE 1
11 H85884A COVER 2
12 H85885A COVER 1
29 X44208A HANDLE 1
37 H76476A LID 1
40 B67250A BLOCK 1
41 Y90009A HINGE C-590 1
(Q11059007)
(PL-CENL2500-20)
COOLANT PIPE
COOLANT PIPE P-1
<Rear disposal + raising (+ 100 mm)>
2 3 1 5 10 13
2 3 1
56 (Reference dimensions for installation)

A01286C: NL1500 - NL2000 bed
A01288C: NL2500/700 bed
12
Reference Dimensions for Installation
6
H02375B: Coolant tank (rear disposal specification)
7
8 11
9
4
(Q00845004 2005.11.18)
(PL-CENL2500-09)
COOLANT PIPE P-2

2 A28164A BASE 9
4 B63452C ANGLE 1
5 B63454B ANGLE 1
6 B63453A ANGLE 1
7 B63451B ANGLE 1
8 B63455C ANGLE 1
9 B63450B ANGLE 1
(Q00845004)
(PL-CENL2500-09)
COOLANT GUN
COOLANT GUN P-1
26
1
16
20 3
2
30 ∗
Limit switch cable

17 A
18 6
2 31
21
19
22
23 26
24
20
7 Detail of A
8 5
14
12 29
9 5
4
28 ∗
27 10 NL1500 - NL2500/700, NL3000/700
13
25 15 5 11 NL2500/1250, NL3000/1250
NOTE
Parts marked with an asterisk (∗) is clamped with the cover.
(Q00810002 2006.12.06)
(PL-CENL2500-19)
COOLANT GUN P-2

1 H10345A SWITCH COVER 1
2 B77965B HOLDER 1
3 P33011A COOLANT GUN SG-1C 1
4 P31111A QUICK JOINT PL12-03 1
7 H57161A LID 1
9 P31013A HOSE JOINT 1036 9 1
10 P15134A MEDIUM PRESSURE HYDRAULIC HOSE NWP35 9*2400 W/B 2
12 P18174A AIR TUBE UL12-5+RC12-03 1
13 P31372A JOINT APU-033(PT3/8) 1
15 P31009A HOSE JOINT 1034 9 1
16 E66044A LIMIT SWITCH SHL-Q2255-01 1
19 F30158A COLLAR 1
20 P31001A HOSE JOINT 1009 9 1
25 B88592A FLAME 1
27 H66365A ANGLE 1
28 H58900A HOSE GUIDE 1
29 H67481A PLATE 1
31 P31346A HOSE JOINT 1034-1206 1
(Q00810002)
(PL-CENL2500-19)
COOLANT GUN P-3
<Rear disposal specification>
7 8 9 10
2
3
13
4
14
5
15
6
16
22
23
11 12 17 18
A
32
19 20 21
Detail of A 33
34
24
25
30 31
29
26 27 28
Limit switch cable
(Q07333001 2007.05.30)
(PL-CENL2500-22)
COOLANT GUN P-4

1 P33011A COOLANT GUN SG-1C 1
2 P31442A JOINT RC12-03 1
3 B77965B HOLDER 1
4 F30158A COLLAR 1
10 H10345A SWITCH COVER 1
11 H57161A LID 1
18 P31001A HOSE JOINT 1009 9 1
19 H66365A ANGLE 1
20 P30119A JOINT RL12-3 1
21 P31372A JOINT APU-033(PT3/8) 1
23 P31009A HOSE JOINT 1034 9 1
24 B88592A FRAME 1
26 P31013A HOSE JOINT 1036 9 1
27 H67481A PLATE 1
30 P31346A HOSE JOINT 1034-1206 1
31 P34042A VALVE 1
32 P18174A AIR TUBE UL12-5+RC12-03 1
(Q07333001)
(PL-CENL2500-22)
SPINDLE AIR BLOW
SPINDLE AIR BLOW P-1
<Spindle air purge specification>
SL3018A01
F40011A 1
F44140A 1
F44141A 1
N16006A 1
R00125B 1
R38111A 1
Y62048A 1
7 Y80087A 1
F57629A 1
F58403B 1
F58332B 1
1 R37153C 1
S03371A 1
S06054A 1
4
Detail of D 2
Detail of C
Section A-A

NOTE
(Q05260004 2006.03.29)
(PL-CENL2500-14)

1 F58403A FLANGE 1
3 F58404A FLANGE 1
4 F58405A FLANGE 1
6 F45241A FLANGE 1
7 P31138A QUICK JOINT PNM-6-PT1/8-BSM 1
8 SL3018A SPINDLE UNIT_NL2500_MITSUBISHI_AIR PURGE 0
(Q05260004)
(PL-CENL2500-14)
<Sub spindle air purge specification>
Discharging outlet
Air supply port (0.1 MPa)

(φ6 Air tube)
Discharging outlet
1
4
Air supply port (0.1 MPa)
(φ6 Air tube)
Section A-A Section B-B

(Q05284002 2004.11.08)
(PL-CENL2500-02)

1 F58408A FLANGE 1
3 F58409A FLANGE 1
4 P31398A QUICK JOINT PNM-6-M5-BSM 1
(Q05284002)
(PL-CENL2500-02)
OPTION
OPTION P-1
<Workpiece rest>
13
12 15 14
1
11
2
10 3
9
5 16 17
(Q00787003 2005.03.18)
(PL-CENL2500-23)
OPTION P-2

1 B59454A PLATE 2
3 B30992A ARM 2
7 B35572A BASE 2
8 H29335A COVER 1
11 B88864A RAIL 1
12 B59452A BASE 1
14 F30344A COLLAR 2
16 B60259A KEY 2
(Q00787003)
(PL-CENL2500-23)
OPTION P-3
<Workpiece rest (NL2500/1250)>
14
1
13
6
2
4
10
15
12
5
11
16
(Q00880002 2005.02.09)
(PL-CENL2500-04)
OPTION P-4

1 B59452A BASE 1
2 B88865A RAIL 1
5 B35572A BASE 2
6 F30344A COLLAR 2
7 B30992A ARM 12
8 B59454A PLATE 12
10 B60259A KEY 2
16 B63479A ANGLE 1
(Q00880002)
(PL-CENL2500-04)
CHUCK AND CYLINDER
CHUCK AND CYLINDER P-1
<HOWA 12-inch solid chuck>
R72035A01
F60141
K13128
H22318
(Q06657001 2006.10.17)
(PL-CENL2500-17)
<NL2500 (spindle internal work stop (MATSUMOTO 10-inch hollow chuck))>
16
15
14
10 9 13 18 12
Turning Milling
6 4 7 3 specification 2 specification 5 8 19 17 1 11
(Q00800002 2005.02.09)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
3 F23033A CYLINDER ADAPTER 1
4 H59089C SUPPORT 1
5 H22324B WHIRL STOPPER 1
6 K22026A CHUCK CYLINDER SKP175/82-22-02 1
7 H21577A CHIP BUCKET 1
8 F60151A COLLAR 1
9 N83015A HEXAGON NUT 1
10 H29318A SHAFT COVER 1
11 K12022A HOLLOW CHUCK ZA8-10-82B-05 1
12 F80059A FLANGE 1
14 R26084A ADJUSTING SHAFT 4
15 R22159A STOPPER 6
17 R75245C DRAW PIPE 1
19 W06071A O RING P-71 1
(Q00800002)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (KITAGAWA 10-inch hollow chuck))>

18
16
17
15 12 9 14 13
Turning Milling
(Q00793002 2005.02.09)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
5 H59089C SUPPORT 1
10 F60151A COLLAR 1
11 K20043A CHUCK CYLINDER SS1881C21 1
13 F83114A FLANGE 1
19 W06071A O RING P-71 1
(Q00793002)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (KITAGAWA 12-inch hollow chuck))>
16
18
17
15 12 10 14 13
Turning Milling
(Q00796002 2005.02.09)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
5 H59089C SUPPORT 1
9 K10037A HOLLOW CHUCK B212A821H 1
11 F60151A COLLAR 1
13 F83114A FLANGE 1
19 W06065A O RING P-65 1
(Q00796002)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (HOWA 10-inch hollow chuck))>
15
14
13
12 10 9 19 20
Turning Milling
17 6 5 4 3 specification 2 specification 7 11 18 16 1 8
(Q00801002 2005.02.09)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
4 K21007A CHUCK CYLINDER C1TA165 M-1864D 1
6 H59089C SUPPORT 1
7 B63312A WHIRL STOPPER 1
8 K13070A HOLLOW CHUCK HO37M10 M-857 1
9 F66376A STAND M-1865 1
11 F60123A COLLAR 1
18 W06065A O RING P-65 1
(Q00801002)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (HOWA 12-inch hollow chuck))>
16
15
17
14 12 9 13 18
Turning Milling
11 6 3 2 5 10 19 1 7 8
4 specification specification
(Q00790002 2005.02.09)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
4 H59089C SUPPORT 1
8 K11025A HOLLOW CHUCK H037M12 M-5058 1
10 F60151A COLLAR 1
13 F83114A FLANGE 1
19 W06071A O RING P-71 1
(Q00790002)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (NIKKO 10-inch hollow chuck))>
18
16
17
15 12 9 14 13
11 8 5 7 10 19 6
(Q07000001 2005.05.19)
(PL-CENL2500-17)

1 R00125B SPINDLE 1
2 F67447A DISK 1
4 K13016A HOLLOW CHUCK HWB3-250A8 1
5 H59089C SUPPORT 1
10 F60151A COLLAR 1
13 F83114A FLANGE 1
19 W06071A O RING P-71 1
(Q07000001)
(PL-CENL2500-17)
<NL2500/700 (spindle internal work stop (RIKEN SAD-65))>
17
16
15
13 11 8 18 12
10 6 3 2 5 9 19 7 1 20 14
4
(Q00872001 2005.01.25)
(PL-CENL2500-22)

1 R00125B SPINDLE 1
2 F67447A DISK 1
4 H59089B SUPPORT 1
7 R75122B DRAW PIPE 1
9 F60094A COLLAR 1
12 F83114A FLANGE 1
14 K17045A COLLET CHUCK SAD-65 1
19 W06056A O RING P-56 1
20 F10048A CHUCK FLANGE 1
(Q00872001)
(PL-CENL2500-22)
<Sub spindle workpiece ejection (KITAGAWA 6-inch hollow chuck + KITAGAWA 6-inch solid cylinder)>
7 8
∗ 4
$ 5
# 6
NOTE (1) ∗: KITAGAWA (K14002A)

(2) $: HOWA (K12070A)
(3) #: MATSUMOTO (K10181A)
(Q00881002 2006.08.04)
(PL-CENL2500-22)

1 F71074B FLANGE 1
2 R25197B SHAFT 1
4 F56193B SLEEVE 1
5 F56254A SLEEVE 1
6 F56255A SLEEVE 1
8 W06021A O RING P-21 1
9 W06014A O RING P-14 1
(Q00881002)
(PL-CENL2500-22)
<Sub spindle workpiece ejection (RIKEN SAD-40 + KITAGAWA 6-inch solid cylinder)>
5
4
6
K17043B
1
(Q00882002 2005.03.18)
(PL-CENL2500-22)

1 F56129B SLEEVE 1
3 F71074B FLANGE 1
4 R31182A SHAFT 1
6 W06014A O RING P-14 1
(Q00882002)
(PL-CENL2500-22)
2 9 8 10
1 4 7
11
14
12
13
(Q07162002 2006.03.09)
(PL-CENL2500-22)

2 R00171A SPINDLE 1
7 F55401A FLANGE 1
8 F67527A DISK 1
11 B18131A SPECIAL JOINT 1
12 H02409A TANK 1
13 H22351A WHIRL STOPPER 1
(Q07162002)
(PL-CENL2500-22)
AUTOMATIC DOOR
AUTOMATIC DOOR P-1
<Left front door (NL2500/700)>
12 25 27 28
16 22
3 29 30 31 7 9 8 15 32
Detail of A 24
13
19 4
18 21
1 23
2
11
3
17
20 Detail of B
A
5 6
B
14
26 12
10
(Q00802001 2005.02.11)
(PL-CENL2500-04)
AUTOMATIC DOOR P-2

1 U41465A AIR CYLINDER HCM-LB-40B-795 1
2 U05194A FLEXIBLE CONDUIT 25.2-055-17-22B 3
5 B63326A ANGLE 2
9 H47326A TAPE SWITCH MOUNTING PLATE 1
10 U40640A FLOATING JOINT FJ-O-14-FL249659 1
11 E66412A TAPE SWITCH 1
13 X32694A RUBBER 1
14 X32696A RUBBER 1
17 H13831A LIMIT SWITCH MOUNTING PLATE 1
18 U40089A SPEED CONTROLLER SC3W-8-8 2
(Q00802001)
(PL-CENL2500-04)
AUTOMATIC DOOR P-3
<Front door (NL2500/1250)>
23 15
3 39
13 2
26
20
29
24
16
14 Detail of C 17
37
A
21 4
11 40
5
41
6
7
8 B 36
A 17
16 35
C
27
B
18 33
10
9 34
1
1 38
19
12
(Q00804001 1/2 2005.02.11)
(PL-CENL2500-04)
AUTOMATIC DOOR P-4
16 5 7 6 18 11
8 3
17
12
10
9 View A-A View B-B
19
(Q00804001 2/2 2005.02.11)
(PL-CENL2500-04)
AUTOMATIC DOOR P-5

1 E66421A TAPE SWITCH 2
3 B63283A BRACKET 1
4 U40640A FLOATING JOINT FJ-O-14-FL249659 2
5 B63371A BRACKET 3
8 X32717A RUBBER 1
9 X32715A RUBBER 1
15 U05194A FLEXIBLE CONDUIT 25.2-055-17-22B 6
17 H13831A LIMIT SWITCH MOUNTING PLATE 3
18 B63293A SWITCH MOUNTING PLATE 1
19 H78402A SAFETY COVER 1
20 U40089A SPEED CONTROLLER SC3W-8-8 4
(Q00804001)
(PL-CENL2500-04)
SLIDEWAY LUBRICATION
OIL PIPE
SLIDEWAY LUBRICATION OIL PIPE P-1
Saddle
Tool Post
Tailstock or
Headstock 2 Cross Slide
Ball nut
Cross Slide Cross Slide Y (Y only)
Ball nut Ball nut

(Front)
Saddle
Tailstock
Ball nut
Saddle
Headstock 2 (S only)
Cross Slide
Ball nut
Cross Slide Y
Y-axis Specification
NOTE indicates a nylon tube.

@: NL1500, NL1500MC, NL2000, NL2000MC, NL2500, NL2500MC only
Y: NL1500Y, NL2000Y, NL2500Y only
S: NL1500S, NL1500SMC, NL2000S, NL2000SMC, NL2500S, NL2500SMC only
SY: NL1500SY, NL2000SY, NL2500SY only
(Q44148 A07 2007.06.15)
(PL-CENL2500-22)
SLIDEWAY LUBRICATION OIL PIPE P-2

1 U27022A CYCLE PUMP LCB4-8744E 1
2 P40138A ELBOW NIPPLE PH6-M10T 1
3 P40474A PLUNGER DPB-11 0.06CC 1
4 P40120A PLUG PG10N 1
17 P99618B PIPE SET * 1
18 P99628B COPPER PIPE * 1
31 P40207A PLUNGER DPB-16-0.06cc 1
34 P40519A PLUNGER DPB-15-0.16CC No3.4-0.06cc 1
35 P40097A CONNECTOR PQ10T 2
36 P40120A PLUG PG10N 2
40 P40008A NIPPLE PD4 9
41 P99619C PIPE SET 1
42 P99622B PIPE SET 1
54 P40096A PLUNGER DPB-13-0.16CC 1
55 P40097A CONNECTOR PQ10T 4
56 P40120A PLUG PG10N 3
57 P40121A PLUG PG8N 1
60 P40008A NIPPLE PD4 12
61 P40055A T TYPE CONNECTOR PKD6 1
62 P40050A JOINT PFF4 2
65 P99619C PIPE SET 1
(Q44148 A07)
(PL-CENL2500-22)
STEADY REST
STEADY REST P-1
SLU-1Z 1 3 SLU-1Z
SLU-2Z 2 4 SLU-2Z
∗ 6
20 21 22
NL2500/700 10 12 14 15 17 18 19 26 NL2500/700 24 NL2500/700

23
NL2500/1250 11 13 16 27 NL2500/1250 25 NL2500/1250
Automatic Steady Rest (SLU-1Z, SLU-2Z)
NOTE
∗: Used when the steady rest body is not installed
(Q00805001 1/3 2006.03.27)
(PL-CENL2500-13)
STEADY REST P-2

1 A42024A BRACKET 1
2 A42025A BRACKET 1
3 U35009A AUTO-CENTERING STEADY REST SLU-1-Z 1
4 U35011A AUTO-CENTERING STEADY REST SLU-2Z 1
5 R28089B ECCENTRIC SHAFT 1
8 B45159A BLOCK 1
9 X10210A SQUARE PACKING 1
12 H75879A COVER 1
14 A42023A BASE 1
15 B55099B BLOCK 1
18 B10199A BLOCK 1
23 H82674A COVER 1
24 R34011A DOG 1
25 R34022A DOG 1
(Q00805001 1/3)
(PL-CENL2500-13)
STEADY REST P-3
A
39 42
38
37 40
29 36
28 41
43 44
35
45
30
34 46
47
Section A-A
(Detail of U62061) 48
49
50
51
31
32
33 Manual steady rest
∗: Used when the steady rest body is not installed

NOTE
(Q00805001 2/3 2006.03.27)
(PL-CENL2500-13)
STEADY REST P-4

29 N16016A PIN 3
32 H75909B COVER 1
34 A40070A STEADY REST 1
36 N32002A EYE BOLT 1
37 R64006A KNOB 1
38 A40065A STEADY REST 1
39 R36512A SHAFT FOR STEADY REST 3
44 S16500A ROLLER FOLLOWER NAST 12ZZUUR 9
45 N16042A SHAFT 9
47 F56121A COVER 3
48 R64026A KNOB 3
49 H97448B COVER 1
50 S20032A DUST SEAL DSI303856.5 1
51 H75881A COVER 1
(Q00805001 2/3)
(PL-CENL2500-13)
STEADY REST P-5
52
53
19
13
14
54
55
15
31
56
16
57
58
18
59
17
NL2500/700 10
26
NL2500/1250 11
60 12
Steady Rest Base

(Q00805001 3/3 2006.03.27)
(PL-CENL2500-13)
STEADY REST P-6

55 Y58221B STRAIGHT PIN 8*20(H7) 1
56 B47397A BLOCK 1
57 B42433A BLOCK 1
58 B45524A GUIDE 1
60 S15541A LINEAR GUIDE SHS35LR1QZSSC0(D-NO. 2
(Q00805001 3/3)
(PL-CENL2500-13)
WORK PUSHER
WORK PUSHER P-1
NOTE (1) Holder

NL T10097 (mm), T10101 (Inch)
SL T10036 (mm), T10037 (Inch)
(2) ∗: Inch specification
(Q07243001 2006.05.26)
(PL-CENL2500-14)
WORK PUSHER P-2

1 F46044A COLLAR 1
2 F46046A COLLAR 1
5 R20028A SHAFT 1
6 Y76501A INTERNAL SNAP RING AR22 1
7 F56103A RING 1
8 F72043A PLATE 1
11 F30116A COLLAR 1
12 S18004A PILLOW BALL GE12E 1
13 H28108A EXTENSION SPRING 1
14 F62035A COLLAR 1
15 S20033A DUST SEAL DSI 20*28*4.5*6 1
16 R24313A PIN 1
17 N45015A STRAIGHR STUD 1
18 Y75030A INTERNAL SNAP RING THA-30 1
(Q07243001)
(PL-CENL2500-14)
WORK PUSHER P-3
<16-station VDI specification>
NOTE
∗: Inch specification
(Q00756002 2006.05.26)
(PL-CENL2500-14)
WORK PUSHER P-4

1 F72043A PLATE 1
2 F56103A RING 1
3 F30116A COLLAR 1
4 R20028A SHAFT 1
5 F62035A COLLAR 1
6 R24238A SHAFT 1
7 R24712A SHAFT 1
8 T15003A U DRILL HOLDER 1
9 T15092A U DRILL HOLDER 1
10 F55327A FLANGE 1
11 F55328A FLANGE 1
12 R21261A SHAFT 1
13 R21262A SHAFT 1
14 H28108A EXTENSION SPRING 1
15 S18004A PILLOW BALL GE12E 1
16 Y76501A INTERNAL SNAP RING 1
(Q00756002)
(PL-CENL2500-14)
APPENDIX
DETAIL OF UNIT COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
P-1
HOW TO ORDER MACHINE PARTS
To order the parts used in your machine, inform your name and the following items to the
representative from which you purchased.
(1) MACHINE MODEL
(2) SERIAL No.
(3) ORDER No.
(4) QUANTITY
(5) PART NAME
(6) Page number
(7) Number of revisions
NOTE (1) The parts actually used to configure the machine delivered to you may differ from
those in this parts list because of the specifications selected and other factors. When
ordering parts, refer to the parts list specific to your machine, which can be found in
the maintenance drawing file inside the electrical cabinet.
(2) Inform the items (5), (6), and (7) only when available.
For each item, see the following portions or the list.

(1) MACHINE MODEL . . . . . . . The ELECTRICAL RATING plate attached to the electrical
cabinet.
(2) SERIAL No. . . . . . . . . . . . . The ELECTRICAL RATING plate attached to the electrical
cabinet.
(3) ORDER No. . . . . . . . . . . . . Parts list
NOTE
If the ORDER No. of the electric part is not clear, inform the manufacturer name and model
of the part. These are mentioned on the part.
(4) QUANTITY . . . . . . . . . . . . . Required quantity
(5) PART NAME. . . . . . . . . . . . Parts list
(6) Page number . . . . . . . . . . . Parts list
(7) Number of revisions . . . . . . Parts list
P-2
<Example>
Ordering the limit switch for checking the tailstock clamp/unclamp in the SL-25A/500
(1) Check the MACHINE MODEL and SERIAL No. on
ELECTRICAL RATING the ELECTRICAL RATING plate attached to the
MACHINE MODEL : SL 25A5 electrical cabinet.
SERIAL NO. : 2501
MACHINE MODEL: SL-25A/500
PHASE : 3
SERIAL No.: 2501
MADE IN JAPAN
95 76 77 (2) Check the drawing No. (ORDER No.), quantity (Qt.),

and part name (PART NAME) of the parts on the
parts list.
54
ORDER No.: E66044A
55 63 64 65 66 67
68 69
QUANTITY: 1
56
57 70 PART NAME: SWITCH
58 71 72
59 If the ORDER No. of the electric part is not clear,
73 NOTE
60
61 inform the manufacturer name and model of the
62 part. These are mentioned on the part.
74 75
No. ORDER No. PART NAME Qt. REMARK

61 Y60110A HEX. NUT 4 M10-1
62 Y34450A SOCKET SCREW (CONE) 4 M10 × 50
63 E66044A SWITCH 1 SHL-Q2255-01
64 Y20525A PAN HEAD SCREW 2 M4 × 5
(3) Check the page number of the parts list on which the
part name is mentioned.
Comment Form Page P-30.
To improve this manual, we invite you to make commen

(4) Check the number of revisions mentioned in the last
manual. We want to know how you think we can make page of the parts list.
those concerning this manual only.
Number of revisions: SL259308C15
Name of manual PARTS LIST for SL-25
(5) Please inform the items checked by (1) - (4) to the
Number of revisions SL259308C15
representative.
Name
Department
Address
Comment Form Date:
To improve this manual, we invite you to make comments on any insufficient description or errors in this
manual. We want to know how you think we can make this manual better. Please restrict your comments to
those concerning this manual only. Comments can also be submitted using the company website at
http://www.moriseiki.com.
Name of Manual PARTS LIST for NL2500
Number of Revisions PL-CENL2500-23 (2007.9)
Name Company
Department Telephone
Address
Chapter Page Line Comments/Requests
For Mori Seiki's Use - Do not write below this line.
Description Reception No. Received by

http://www.moriseiki.com
MORI SEIKI CO., LTD. MORI SEIKI ESPAÑA S.A.

Nagoya Head Office Head Office & Technical Center
2-35-16 Meieki, Nakamura-ku, Nagoya City, Aichi 450-0002, Japan Calle de la Electrónica, Bloque B, Nave 9 Poligono Industrial "La Ferreria" 08110
Phone: (052) 587-1811 Fax.: (052) 587-1818 Montcada I Reixac (Barcelona), Spain
Phone: (34)-935-75-36-46 Fax.: (34)-935-75-08-47
Nara Campus
362 Idono-cho, Yamato-Koriyama City, Nara 639-1183, Japan
Phone: (0743) 53-1121 MORI SEIKI SINGAPORE PTE LTD
106 Kita Koriyama-cho, Yamato-Koriyama City, Nara 639-1160, Japan Head Office & Technical Center
Phone: (0743) 53-1125 3 Toh Guan Road East, Singapore 608835
Iga Campus Phone: (65)-6560-5011 Fax.: (65)-6567-6234
201 Midai, Iga City, Mie 519-1414, Japan Technical Center
Phone: (0595) 45-4151 MALAYSIA BRANCH
Chiba Campus
488-19 Suzumi-cho, Funabashi City, Chiba 274-0052, Japan
Phone: (047) 410-8800
MORI SEIKI (THAILAND) CO., LTD.
Head Office & Technical Center
119/2 Moo 8, Bangnathani Building 1st Floor A1, Bangna-Trad KM.3 Road Kwaeng
MORI SEIKI U.S.A., INC. Bangna, Khet Bangna, Bangkok 10260, Thailand
Head Office Phone: (66)-2-361-3700-5 Fax.: (66)-2-361-3706
5655 Meadowbrook Drive, Rolling Meadows, Illinois 60008
Phone: (1)-847-593-5400 Fax.: (1)-847-593-5433 MORI SEIKI (TAIWAN) CO., LTD.
Administrative Department
2100 Golf Road Suite 300, Rolling Meadows, Illinois 60008
No. 8, Kong 8th Road, Linkou No. 2 Industrial District, Linkou Hsiang, Taipei Hsien,
Phone: (1)-847-290-8535 Fax.: (1)-847-290-5500 Taiwan, R.O.C.
Technical Centers Phone: (886)-2-2603-1701 Fax.: (886)-2-2603-1706
Chicago, Dallas, Los Angeles, Detroit, Cincinnati, Boston, New Jersey
Representative Office MORI SEIKI HONG KONG LIMITED
Charlotte, San Francisco
Unit 02, 8/F., Vicwood Plaza, 199 Des Voeux Road, Central, Hong Kong
MORI SEIKI MEXICO, S.A. DE C.V. Phone: (852)-2757-8910 Fax.: (852)-2757-7839
Montecito 38 Piso 12-38 Col. Napoles 03810 México D.F. MORI SEIKI (SHANGHAI) CO., LTD.
Phone: (52)-55-9000-3276 Fax.: (52)- 55-9000-3279
Head Office
Room 4301, 4307, Maxdo Center, No.8 Xing Yi Rd., HongQiao Development Zone,
MORI SEIKI BRASIL LTDA. Shanghai 200336, China
Head Office & Technical Center Phone: (86)-21-5208-0270 Fax.: (86)-21-5208-0273
Rua República do Iraque, 1432 2 and, Campo Belo 04611-002 São Paulo - SP, Brasil Technical Center
Phone: (55)-11-5543-1762 Fax.: (55)-11-5543-1948 Shanghai, Beijing, Tianjin, Dalian, Shenzhen, Chongqing, Guangzhou
MORI SEIKI GmbH MORI SEIKI KOREA CO., LTD.

Head Office Head Office & Technical Center
Antoniusstrasse 14, 73249 Wernau, Germany A-101, 2 SK TWIN TECH TOWER, 345-9 Kasan-dong, Kumcheon-Ku, Seoul,
Phone: (49)-7153-934-0 Fax.: (49)-7153-934-220 Korea
Phone: (82)-2-862-0925 Fax.: (82)-2-862-0928
Technical Centers
Stuttgart, Istanbul, Prague, München, Hamburg, Düsseldorf
PT. MORI SEIKI INDONESIA
MORI SEIKI (UK) LTD. Head Office & Technical Center
Komplek Gading Bukit Indah Blok M/01 J1. Bukit Gading Raya, Kalapa Gading,
Head Office
Jakarta Utara, 14240 Indonesia
202 Bedford Avenue, Slough SL1 4RY, England Phone: (62)-21-453-1199 Fax.: (62)-21-4585-7414
Phone: (44)-1753 526518 Fax.: (44)-1753 524695
Technical Centers
London, Birmingham
MORI SEIKI CO., LTD. India Branch
Representative Office
India Branch: 404 A World Trade Centre, Babar Rd. Connaught Place,
Leicester
New Delhi - 110001, India
Phone: (91)-11-4152-8520 Fax.: (91)-11-4152-8530
MORI SEIKI FRANCE S.A.S.
Head Office & Technical Center MORI SEIKI AUSTRALIA PTY LTD
Parc du Moulin, 1 Rue du Noyer BP 19326 Roissy en France 95705 Roissy CDG Head Office
Cedex, France
6/6 Garden Road Clayton VIC 3168, Australia
Phone: (33)-1-39-94-68-00 Fax.: (33)-1-39-94-68-59
Phone: (61)-3-8545-0900 Fax.: (61)-3-9561-4999
Technical Centers
Technical Centers
Toulouse, MS SYFRAMO S.A.S.
Melbourne, Sydney
MORI SEIKI ITALIANA S.R.L.

Via Riccardo Lombardi N. 10, 20153 Milano, Italy
Phone: (39)-02-4894921 Fax.: (39)-02-48914448
The export of this product is subject to an authorization from the government of the exporting country. Printed in Japan
Check with the government agency for authorization.
061110

PL Nl2500 Parts

Uploaded by

Copyright:

Available Formats

PL Nl2500 Parts

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PL Nl2500 Parts

Uploaded by

Copyright:

Available Formats

PARTS LIST

The product shipped to you (the machine and accessory equip-

Description of machine: NC lathe

Machine serial No.:

Business hours: 8:30 - 17:30

SPINDLE AIR BLOW

SLIDEWAY LUBRICATION OIL PIPE

APPENDIX: DETAIL OF UNIT COMPONENT

ONIKAZE Heavy Smoker OIL MIST COLLECTOR

ROTATING HYDRAULIC CYLINDER

(Labels will be attached at different places depending on the model.)

(Labels will be attached at different places depending on the model.)

<Left-side workstocker specification>

(Labels will be attached at different places depending on the model.)

NOTE (1) ∗: MC, Y specification

NO. ORDER NO. PARTS NAME Q'ty

NOTE (1) ∗: 6000 min−1

(2) #: 8000 min−1

NO. ORDER NO. PARTS NAME Q'ty

NOTE (1) ∗: 6000 min−1

(2) #: 8000 min−1

NO. ORDER NO. PARTS NAME Q'ty

<73-mm dia. through hole sub-spindle specifications>

NO. ORDER NO. PARTS NAME Q'ty

(Q07028004 2/2 2006.12.13)

NO. ORDER NO. PARTS NAME Q'ty

<MC specification turret (for NL standard holders and SL-standardized holders)>

(Q00652004 1/8 2006.01.23)

(Q00652004 2/8 2006.01.23)

Milling unit (MC specfication)

(Q00652004 4/8 2006.01.23)

Coolant guide piston Coolant guide piston (Y-axis specification)

(Q00652004 7/8 2006.01.23)

40 NL1500: SL-standardized turret (12-station, MC and inch specifications)

25 NL1500, NL2000, NL2500: SL-standardized turret (MC specification 12-station turret)

21 NL2000, NL2500: SL-standardized turret (MC specification 10-station turret)

Turret head (SL-standardized MC specifications)

(Q00652004 8/8 2006.01.23)

NO. ORDER NO. PARTS NAME Q'ty

<VDI turret 12-station>

Lock Pin Assembly Diagram

NO. ORDER NO. PARTS NAME Q'ty

NOTE (1) Balloon top number: Parts list number

NO. ORDER NO. PARTS NAME Q'ty

(Q00650005 2/2 2005.12.08)

NO. ORDER NO. PARTS NAME Q'ty

NO. ORDER NO. PARTS NAME Q'ty

NO. ORDER NO. PARTS NAME Q'ty

<Ball screw center cooling specification>

Service set No.: BS1072

NO. ORDER NO. PARTS NAME Q'ty

NO. ORDER NO. PARTS NAME Q'ty

NOTE (1) Balloon top number: Parts list number

NO. ORDER NO. PARTS NAME Q'ty

BS1062A01 BS1063A01 BS1064A01

NO. ORDER NO. PARTS NAME Q'ty

BS1065A01 BS1066A01 BS1067A01

NO. ORDER NO. PARTS NAME Q'ty

NO. ORDER NO. PARTS NAME Q'ty