DTC MAIN ECU (SPU 40-26) -10.

-10. DTC MAIN ECU (SPU 40-26)

Fault Code Description
21-7F101.02 JSM roller 1 fault. Inconsistency between analogue channel and roller 1 logic.
21-7F101.10 JSM roller 1 fault. Roller 1 out-of-range, analogue channel voltage greater than 95%
VBatt.
21-7F101.12 JSM roller 1 fault. Roller 1 out-of-range, analogue channel voltage less than 5%
VBatt.
21-7F102.02 JSM roller 2 fault. Inconsistency between analogue channel and roller 2 logic.
21-7F102.10 JSM roller 2 fault. Roller 2 out-of-range, analogue channel voltage greater than 95%
VBatt.
21-7F102.12 JSM roller 2 fault. Roller 2 out-of-range, analogue channel voltage less than 5%
VBatt.
21-7F103.02 BMEP Raise/Lower fault. Inconsistency between analogue channels (Difference >
250 mV).
21-7F103.10 BMEP Raise/Lower fault. Channel 1 out of range, analogue channel voltage less
than 0.25 V or greater than 4.75 V.
21-7F103.12 BMEP Raise/Lower fault. Channel 2 out of range, analogue channel voltage less
than 0.25 V or greater than 4.75 V.
21-7F104.02 BMEP Tilt fault. Inconsistency between analogue channels (Difference > 250 mV).
21-7F104.10 BMEP Tilt fault. Channel 1 out of range, analogue channel voltage less than 0.25 V or
greater than 4.75 V.
21-7F104.12 BMEP Tilt fault. Channel 2 out of range, analogue channel voltage less than 0.25 V or
greater than 4.75 V.
21-7F105.02 FNR switch fault (Pin A25 and B15). Contacts F and R simultaneously active.
21-7F106.02 Inconsistent pushbutton BP1 status (Pin A08). Button short to batt + or button
pressed when switching to APC.
21-7F107.02 Inconsistent JSM "+" pushbutton status (Pin A18). Button short to batt + or button
pressed when switching to APC.
21-7F108.02 Inconsistent JSM "-" pushbutton status (Pin 124). Button short to batt + or button
pressed when switching to APC.
21-7F109.03 Boom angle sensor fault (Pin A12, C11). Inconsistency between the 2 channels,
difference greater than 5° (approx. 0.3 V).
21-7F109.07 Boom angle sensor fault (Pin A12, C11). The connecting rod is not in the right area
(Channels at 0.4 V and 4.6 V).
21-7F109.10 Boom angle sensor fault (Pin A12, C11). Channel 1 out-of-range, not connected or
short circuited (voltage less than 0.5 V or greater than 4.5 V).
21-7F109.12 Boom angle sensor fault (Pin A12, C11). Channel 2 out-of-range, not connected or
short circuited (voltage less than 0.5 V or greater than 4.5 V).
21-7F10A.02 Boom retracted sensor fault (Pin A22 and B31). The 2 contacts are inconsistent.
21-7F10B.09 CAN strain gage fault. Loss of frame 0x0CFF0EEB end frame 0x0CFF0FEC. Check
the electrical connection.
21-7F10B.0A CAN strain gage fault. Gage (channel 2) faulty: loss of frame 0x0CFF0FEC or value
inconsistent (no change of the signal).
21-7F10B.0B CAN strain gage fault. Gage (track 1) faulty: loss of frame 0x0CFF0EEB or
inconsistent value (no change of signal).
21-7F10B.0C CAN strain gage fault. Inconsistency between the 2 channels, difference greater than
20 %.
21-7F10B.0D CAN strain gage fault. Inconsistent signal variation, one goes up, the other goes
down.
21-7F10B.10 CAN strain gage fault. Out of range, channel 1 greater than 65,045 or less than 485
(0x01E5).

DTC MAIN ECU (SPU 40-26)EN-US(/) 1

-10. DTC MAIN ECU (SPU 40-26)

Fault Code Description

21-7F10B.12 CAN strain gage fault. Out of range, channel 2 greater than 65,045 or less than 485
(0x01E5).
21-7F10C.03 Brake pedal sensor fault (Pin A17). Short to +Batt detected.
21-7F10C.04 Brake pedal sensor fault (Pin A17). Short to ground or open circuit detected.
21-7F10D.03 Manual accelerator sensor fault (Pin A01). Short to +Batt detected.
21-7F10D.04 Manual accelerator sensor fault (Pin A01). Short to ground or open circuit detected.
21-7F10E.02 Seat sensor fault (Pin B16 and C10). The 2 contacts are inconsistent.
21-7F10F.04 Fuel level sensor fault (Pin B12). Short circuit to ground detected.
21-7F10F.05 Fuel level sensor fault (Pin B12). Open circuit detected.
21-7F110.04 External temperature sensor fault (Pin B21). Short circuit to ground detected.
21-7F110.05 External temperature sensor fault (Pin B21). Open circuit detected.
21-7F111.04 Hydraulic oil temperature sensor fault (Pin B19). Short circuit to ground detected.
21-7F111.05 Hydraulic oil temperature sensor fault (Pin B19). Open circuit detected.
21-7F112.04 Transmission oil temperature sensor fault (Pin B20). Short circuit to ground detected.
21-7F112.05 Transmission oil temperature sensor fault (Pin B20). Open circuit detected.
21-7F113.04 Air intake temperature sensor fault (Pin C19). Short circuit to ground detected.
21-7F113.05 Air intake temperature sensor fault (Pin C19). Open circuit detected.
21-7F114.03 Carriage angle sensor fault (Auxiliary). Inconsistency between the 2 channels,
difference greater than 5° (approx. 0.3 V).
21-7F114.07 Carriage angle sensor fault (Auxiliary). The connecting rod is not in the right area
(Channels at 0.4 V and 4.6 V).
21-7F114.09 Carriage angle sensor fault (Auxiliary). Loss of frame 0x18FFDB31. Check the
electrical connection.
21-7F114.10 Carriage angle sensor fault (Auxiliary). Channel 1 out-of-range, not connected or
short circuited (voltage less than 0.5 V or greater than 4.5 V).
21-7F114.12 Carriage angle sensor fault (Auxiliary). Channel 2 out-of-range, not connected or
short circuited (voltage less than 0.5 V or greater than 4.5 V).
21-7F114.13 Carriage angle sensor fault (Auxiliary). The 0x18FFDB31 frame is present but the
sensor values are "unavailable".
21-7F115.0C Inconsistency between the boom retracted sensor (Pin A22 and B31) and the boom
retracted damper sensor (Pin A15).
21-7F116.04 Hydraulic filter clogging sensor fault: Short circuit to ground detected.
21-7F116.05 Hydraulic filter clogging sensor fault: Open circuit detected.
21-7F117.04 Air filter clogging sensor fault: Short circuit to ground detected.
21-7F118.04 Power steering circuit pressure sensor fault. Short circuit to ground detected.
21-7F118.05 Power steering circuit pressure sensor fault: Open circuit detected.
21-7F119.02 Inconsistent declutch button state (Pin A24). Button short to ground or button
pressed when switching to APC.
21-7F11A.00 Truck speed sensor input fault. Voltage above the nominal range.
21-7F11A.01 Truck speed sensor input fault. Voltage below the nominal range.
21-7F11A.0C Truck secondary speed sensor input fault. Frequency inconsistent in relation to the
primary sensor
21-7F11B.03 Front clutch pressure sensor fault (Pin A17). Short to +Batt detected.
21-7F11B.04 Front clutch pressure sensor fault (Pin A17). Short to ground or open circuit detected.
21-7F11D.03 Rear clutch pressure sensor fault (Pin C18). Short to +Batt detected.
21-7F11D.04 Rear clutch pressure sensor fault (Pin C18). Short to ground or open circuit detected.
21-7F11E.02 Fault assembled when the two raise/lower contacts are simultaneously active.

2 DTC MAIN ECU (SPU 40-26)EN-US(/)

 DTC MAIN ECU (SPU 40-26) -10.

Fault Code Description

21-7F11F.02 Fault assembled when the two tilt contacts are not consistent with one another.
21-7F120.02 Fault assembled when the two right stabilizer raise/lower contacts are simultaneously
active.
21-7F120.03 Fault assembled when the two left stabilizer raise/lower contacts are simultaneously
active.
21-7F121.02 Fault assembled when the two slope contacts are not consistent with one another.
21-7F123.02 Chain boom sensors inconsistent fault.
21-7F124.03 Right stabilizer pressure sensor fault (Pin B25). Short to +Batt detected.
21-7F124.04 Right stabilizer pressure sensor fault (Pin B25). Short to ground or open circuit
detected.
21-7F125.03 Left stabilizer pressure sensor fault (Pin B32). Short to +Batt detected.
21-7F125.04 Left stabilizer pressure sensor fault (Pin B32). Short to ground or open circuit
detected.
21-7F126.02 Easy Connect System button fault seen active at start.
21-7F127.02 State of deadman button inconsistent. Button short to batt+ or button pressed when
ignition switched on.
21-7F128.03 Boom intermediate inductive sensor 1 fault (Pin B23). Short to +batt detected.
21-7F128.04 Boom intermediate inductive sensor 1 fault (Pin C24). Short to ground or open circuit
detected.
21-7F129.03 Boom intermediate inductive sensor 2 fault (Pin B23). Short to +batt detected.
21-7F129.04 Boom intermediate inductive sensor 2 fault (Pin C24). Short to ground or open circuit
detected.
21-7F12A.0B CAN tilt meter fault. Value inconsistent (no signal change).
21-7F12B.04 Hydraulic oil level sensor fault (Pin C18). Open circuit detected.
21-7F12B.05 Hydraulic oil level sensor fault (Pin C18). Short to ground detected.
21-7F201.01 Boom lifting control fault (Pin C05). SPU power supply problem (VBatD: Pin B03 and
B04).
21-7F201.03 Boom lift valve fault (Pin C05). Short to +Batt detected.
21-7F201.04 Boom lift valve fault (Pin C05). Short circuit to ground detected.
21-7F201.05 Boom lift valve fault (Pin C05). Open circuit detected.
21-7F202.01 Boom lowering control fault (Pin C04). SPU power supply problem (VBatC: Pin B08
and B09).
21-7F202.03 Boom lowering valve fault (Pin C04). Short to +Batt detected.
21-7F202.04 Boom lowering valve fault (Pin C04). Short circuit to ground detected.
21-7F202.05 Boom lowering valve fault (Pin C04). Open circuit detected.
21-7F203.01 Crowd control fault (Pin C03). SPU power supply problem (VBatE: Pin C08 and C09).
21-7F203.03 Crowd valve fault (Pin C03). Short to +Batt detected.
21-7F203.04 Crowd valve fault (Pin C03). Short circuit to ground detected.
21-7F203.05 Crowd valve fault (Pin C03). Open circuit detected.
21-7F204.01 Dump control fault (Pin C02). SPU power supply problem (VBatE: Pin C08 and C09).
21-7F204.03 Dump valve fault (Pin C02). Short to +Batt detected.
21-7F204.04 Dump valve fault (Pin C02). Short circuit to ground detected.
21-7F204.05 Dump valve fault (Pin C02). Open circuit detected.
21-7F205.01 Telescopic boom extension control fault (Pin B05). SPU power supply problem
(VBatC: Pin B08 and B09).
21-7F205.03 Telescopic boom extension valve fault (Pin B05). Short to +Batt detected.
21-7F205.04 Telescopic boom extension valve fault (Pin B05). Short circuit to ground detected.
21-7F205.05 Telescopic boom extension valve fault (Pin B05). Open circuit detected.

DTC MAIN ECU (SPU 40-26)EN-US(/) 3

-10. DTC MAIN ECU (SPU 40-26)

Fault Code Description

21-7F206.01 Telescopic boom retraction control fault (Pin B17). SPU power supply problem
(VBatD: Pin B03 and B04).
21-7F206.03 Telescopic boom retraction valve fault (Pin B17). Short to +Batt detected.
21-7F206.04 Telescopic boom retraction valve fault (Pin B17). Short circuit to ground detected.
21-7F206.05 Telescopic boom retraction valve fault (Pin B17). Open circuit detected.
21-7F207.01 Front attachment direction A control fault (Pin B29). SPU power supply problem
(VBatE: Pin C08 and C09).
21-7F207.03 Front attachment direction A valve fault (Pin B29). Short to +Batt detected.
21-7F207.04 Front attachment direction A valve fault (Pin B29). Short circuit to ground detected.
21-7F207.05 Front attachment direction A valve fault (Pin B29). Open circuit detected.
21-7F208.01 Front attachment direction B control fault (Pin A14). SPU power supply problem
(VBatE: Pin C08 and C09).
21-7F208.03 Front attachment direction B valve fault (Pin A14). Short to +Batt detected.
21-7F208.04 Front attachment direction B valve fault (Pin A14). Short circuit to ground detected.
21-7F208.05 Front attachment direction B valve fault (Pin A14). Open circuit detected.
21-7F209.01 Rear attachment direction A control fault (Pin B32). SPU power supply problem
(VBatD: Pin B03 and B04).
21-7F209.03 Rear attachment direction A valve fault (Pin B32). Short to +Batt detected.
21-7F209.04 Rear attachment direction A valve fault (Pin B32). Short circuit to ground detected.
21-7F209.05 Rear attachment direction A valve fault (Pin B32). Open circuit detected.
21-7F20A.01 Rear attachment direction B control fault (Pin B25). SPU power supply problem
(VBatC: Pin B08 and B09).
21-7F20A.03 Rear attachment direction B valve fault (Pin B25). Short to +Batt detected.
21-7F20A.04 Rear attachment direction B valve fault (Pin B25). Short circuit to ground detected.
21-7F20A.05 Rear attachment direction B valve fault (Pin B25). Open circuit detected.
21-7F20B.01 LSU control fault (Pin B06). SPU power supply problem (VBatD: Pin B03 and B04).
21-7F20B.03 LSU valve fault (Pin B06). Short to +Batt detected.
21-7F20B.04 LSU valve fault (Pin B06). Short circuit to ground detected.
21-7F20B.05 LSU valve fault (Pin B06). Open circuit detected.
21-7F20C.01 Proportional Fan Drive control fault (Pin A02). SPU power supply problem (VBatC:
Pin B08 and B09).
21-7F20C.03 Proportional Fan Drive control fault (Pin A02). Short to +Batt detected.
21-7F20C.04 Proportional Fan Drive control fault (Pin A02). Short circuit to ground detected.
21-7F20C.05 Proportional Fan Drive control fault (Pin A02). Open circuit detected.
21-7F20D.01 DSB power supply output fault (Pin B33). SPU power supply problem (VBatC: Pin
B08 and B09).
21-7F20D.03 DSB power supply output fault (Pin B33). Short to +Batt detected.
21-7F20D.04 DSB power supply output fault (Pin B33). Short circuit to ground detected.
21-7F20E.01 Safety valve fault (Pin C20). SPU power supply problem (VBatD: Pin B03 and B04).
21-7F20E.03 Safety valve fault (Pin C20). Short to +Batt detected.
21-7F20E.04 Safety valve fault (Pin C20). Short circuit to ground detected.
21-7F20E.05 Safety valve fault (Pin C20). Open circuit detected.
21-7F20F.01 Safety valve ground fault (Pin A05). SPU power supply problem (Ground).
21-7F20F.03 Safety valve ground fault (Pin A05). Short to +Batt detected.
21-7F20F.04 Safety valve ground fault (Pin A05). Short circuit to ground detected.
21-7F20F.05 Safety valve ground fault (Pin A05). Open circuit detected.

4 DTC MAIN ECU (SPU 40-26)EN-US(/)

 DTC MAIN ECU (SPU 40-26) -10.

Fault Code Description

21-7F210.01 Roof light output fault (Pin C25). SPU power supply problem (VBatC: Pin B08 and
B09).
21-7F210.03 Roof light output fault (Pin C25). Short to +Batt detected.
21-7F210.04 Roof light output fault (Pin C25). Short circuit to ground detected.
21-7F211.01 Transmission neutral relay control fault (Pin C21). SPU power supply problem
(VBatE: Pin C08 and C09).
21-7F211.03 Transmission neutral relay fault (Pin C21). Short to +Batt detected.
21-7F211.04 Transmission neutral relay fault (Pin C21). Short circuit to ground detected.
21-7F212.01 Compensating isolating valve control fault (Pin A04). SPU power supply problem
(Ground).
21-7F212.03 Compensating isolating valve fault (Pin A04). Short to +Batt detected.
21-7F212.04 Compensating isolating valve fault (Pin A04). Short circuit to ground detected.
21-7F212.05 Compensating isolating valve fault (Pin A04). Open circuit detected.
21-7F213.01 Boom suspension valve 1 fault (Pin B30). SPU power supply problem (VBatD: Pin
B03 and B04).
21-7F213.03 Boom suspension valve 1 fault (Pin B30). Short to +Batt detected.
21-7F213.04 Boom suspension valve 1 fault (Pin B30). Short circuit to ground detected.
21-7F213.05 Boom suspension valve 1 fault (Pin B30). Open circuit detected.
21-7F214.01 Boom suspension valve 2 fault (Pin C22). SPU power supply problem (VBatE: Pin
C08 and C09).
21-7F214.03 Boom suspension valve 2 fault (Pin C22). Short to +Batt detected.
21-7F214.04 Boom suspension valve 2 fault (Pin C22). Short circuit to ground detected.
21-7F214.05 Boom suspension valve 2 fault (Pin C22). Open circuit detected.
21-7F215.01 Rear deflector valve control fault (Pin C23). SPU power supply problem (VBatE: Pin
C08 and C09).
21-7F215.03 Rear deflector valve fault (Pin C23). Short to +Batt detected.
21-7F215.04 Rear deflector valve fault (Pin C23). Short circuit to ground detected.
21-7F215.05 Rear deflector valve fault (Pin C23). Open circuit detected.
21-7F216.01 Fan Drive On-Off valve control fault (Pin A04). SPU power supply problem (Ground).
21-7F216.03 Fan Drive On-Off valve fault (Pin A04). Short to +Batt detected.
21-7F216.04 Fan Drive On-Off valve fault (Pin A04). Short circuit to ground detected.
21-7F216.05 Fan Drive On-Off valve fault (Pin A04). Open circuit detected.
21-7F217.01 Boom head valve control fault (Pin A03). SPU power supply problem (Ground).
21-7F217.03 Boom head valve fault (Pin A03). Short to +Batt detected.
21-7F217.04 Boom head valve fault (Pin A03). Short circuit to ground detected.
21-7F217.05 Boom head valve fault (Pin A03). Open circuit detected.
21-7F218.01 Radiator ByPass valve control fault (Pin C21). SPU power supply problem (VBatE:
Pin C08 and C09).
21-7F218.03 Radiator bypass valve fault (Pin C21). Short to +Batt detected.
21-7F218.04 Radiator bypass valve fault (Pin C21). Short circuit to ground detected.
21-7F218.05 Radiator bypass valve fault (Pin C21). Open circuit detected.
21-7F219.0C Lowering valve fault, valve outside of tolerances. Change the valve and restart valve
bank calibration.
21-7F21A.0C Lifting valve fault, valve outside of tolerances. Change the valve and restart valve
bank calibration.
21-7F21B.03 Rotating beacon light output fault on navigator. Short to VApc detected.
21-7F21B.04 Rotating beacon light output fault on navigator. Short circuit to ground detected.

DTC MAIN ECU (SPU 40-26)EN-US(/) 5

-10. DTC MAIN ECU (SPU 40-26)

Fault Code Description

21-7F21B.05 Rotating beacon light output fault on navigator. Open circuit detected.
21-7F21C.03 Negative brake On-Off valve 1 fault (Pin B30). Short to +Batt detected.
21-7F21C.04 Negative brake On-Off valve 1 fault (Pin B30). Short circuit to ground detected.
21-7F21C.05 Negative brake On-Off valve 1 fault (Pin B30). Open circuit detected.
21-7F21D.03 Negative brake On-Off valve 2 fault (Pin C22). Short to +Batt detected.
21-7F21D.04 Negative brake On-Off valve 2 fault (Pin C22). Short circuit to ground detected.
21-7F21D.05 Negative brake On-Off valve 2 fault (Pin C22). Open circuit detected.
21-7F21E.01 Trailer braking valve fault (Pin C21). SPU power supply problem.
21-7F21E.03 Trailer braking valve fault (Pin C21). Short to +Batt detected.
21-7F21E.04 Trailer braking valve fault (Pin C21). Short circuit to ground detected.
21-7F21E.05 Trailer braking valve fault (Pin C21). Open circuit detected.
21-7F21F.04 Warning output fault on navigator. Short to ground detected.
21-7F21F.03 Warning output fault on navigator. Short to Vapc detected.
21-7F21F.05 Warning output fault on navigator. Open circuit detected.
21-7F220.04 Axle lock valve fault (Pin A04). Short to ground detected.
21-7F220.03 Axle lock valve fault (Pin A04). Short to +Batt detected.
21-7F220.05 Axle lock valve fault (Pin A04). Open circuit detected.
21-7F220.01 Axle lock valve fault (Pin A04). SPU power supply problem.
21-7F221.04 Ventilation bypass valve fault (Pin A02). Short to ground detected.
21-7F221.03 Ventilation bypass valve fault (Pin A02). Short to +Batt detected.
21-7F221.05 Ventilation bypass valve fault (Pin A02). Open circuit detected.
21-7F221.01 Ventilation bypass valve fault (Pin A02). SPU power supply problem (VBatC: Pin B08
and B09).
21-7F222.04 VRD flow control valve fault (Pin B06). Short to ground detected.
21-7F222.03 VRD flow control valve fault (Pin B06). Short to +Batt detected.
21-7F222.05 VRD flow control valve fault (Pin B06). Open circuit detected.
21-7F222.01 VRD flow control valve fault (Pin B06). SPU power supply problem (VBatC: Pin B08
and B09).
21-7F22A.04 Tilting Pvg valve control fault (Pin C03). Short to ground detected.
21-7F22A.03 Tilting Pvg valve control fault (Pin C03). Short to +Batt detected.
21-7F22B.04 Lifting Pvg valve control fault (Pin C02). Short to ground detected.
21-7F22B.03 Lifting Pvg valve control fault (Pin C02). Short to +Batt detected.
21-7F22C.01 Telescope steering valve fault (Pin B17). SPU power supply problem (VBatD: Pin
B03 and B04).
21-7F22C.03 Telescope steering valve fault (Pin B17). Short to +Batt detected.
21-7F22C.04 Telescope steering valve fault (Pin B17). Short to ground detected.
21-7F22C.05 Telescope steering valve fault (Pin B17). Open circuit detected.
21-7F22D.01 Attachment steering valve fault (Pin A14). SPU power supply problem (VBatC: Pin
B08 and B09).
21-7F22D.03 Attachment steering valve fault (Pin A14). Short to +Batt detected.
21-7F22D.04 Attachment steering valve fault (Pin A14). Short to ground detected.
21-7F22D.05 Attachment steering valve fault (Pin A14). Open circuit detected.
21-7F22E.01 Stabilizer deflector control/leveling fault (Pin B25). SPU power supply problem
(VBatC: Pin B08 and B09).
21-7F22E.03 Stabilizer deflector/leveling fault (Pin B25). Short to +Batt detected.
21-7F22E.04 Stabilizer deflector/leveling fault (Pin B25). Short to ground detected.

6 DTC MAIN ECU (SPU 40-26)EN-US(/)

 DTC MAIN ECU (SPU 40-26) -10.

Fault Code Description

21-7F22E.05 Stabilizer deflector/leveling fault (Pin B25). Open circuit detected.
21-7F223.04 Pump offloading valve fault (Pin C23). Short to ground detected.
21-7F223.03 Pump offloading valve fault (Pin C23). Short to +Batt detected.
21-7F223.05 Pump offloading valve fault (Pin C23). Open circuit detected.
21-7F223.01 Pump offloading valve fault (Pin C23). Loss of VBattE power supply (Pin C08 and
C09).
21-7F224.04 Telescope Pvg valve power supply fault (Pin A14). Short to ground detected.
21-7F224.03 Telescope Pvg valve power supply fault (Pin A14). Short to +Batt detected.
21-7F224.01 Telescope Pvg valve power supply fault (Pin A14). SPU power supply problem
(VBatC: Pin B08 and B09).
21-7F225.04 Attachment Pvg valve power supply fault (Pin B29). Short to ground detected.
21-7F225.03 Attachment Pvg valve power supply fault (Pin B29). Short to +Batt detected.
21-7F225.01 Attachment Pvg valve power supply fault (Pin B29). SPU power supply problem
(VBatD: Pin B03 and B04).
21-7F226.04 Tilting Pvg valve power supply fault (Pin B17). Short to ground detected.
21-7F226.03 Tilting Pvg valve power supply fault (Pin B17). Short to +Batt detected.
21-7F226.01 Tilting Pvg valve power supply fault (Pin B17). SPU power supply problem (VBatD:
Pin B03 and B04).
21-7F227.04 Lifting Pvg valve power supply fault (Pin B05). Short to ground detected.
21-7F227.03 Lifting Pvg valve power supply fault (Pin B05). Short to +Batt detected.
21-7F227.01 Lifting Pvg valve power supply fault (Pin B05). SPU power supply problem (VBatD:
Pin B03 and B04).
21-7F228.04 Telescope Pvg valve control fault (Pin C04). Short to ground detected.
21-7F228.03 Telescope Pvg valve control fault (Pin C04). Short to +Batt detected.
21-7F229.04 Attachment Pvg valve control fault (Pin C05). Short to ground detected.
21-7F229.03 Attachment Pvg valve control fault (Pin C05). Short to +Batt detected.
21-7F301.09 Cab CAN network fault. Bus error or bus off or CRC error or bus warning.
21-7F302.09 Engine CAN network fault. Bus error or bus off or CRC error or bus warning.
21-7F303.09 CAN network fault. Loss of communication with the auxiliary ECU.
21-7F304.09 CAN network fault. Loss of communication with the Navigator.
21-7F305.09 CAN network fault. Loss of communication with the dashboard.
21-7F306.09 CAN network fault. Loss of communication with the engine ECU.
21-7F307.09 CAN network fault. Loss of communication with the transmission ECU.
21-7F308.09 CAN network fault. Communication problem with the transmission ECU (CRC/
Counter).
21-7F309.09 CAN network fault. Communication lost with tilt meter
21-7F30A.09 CAN network fault. Communication lost with the Comfort Steering System ECU
21-7F401.0C DSB fault. DSB Bulk/Suspended load missing from LIN network (ID no. 1).
21-7F402.0C DSB fault. DSB transmission declutch missing from LIN network (ID no. 2).
21-7F403.0C DSB fault. DSB Override missing from LIN network (ID no. 3).
21-7F404.0C DSB fault. DSB Forced march missing from LIN network (ID no. 4).
21-7F405.0C DSB fault. DSB Fan Drive missing from LIN network (ID no. 5).
21-7F406.0C DSB fault. Crab 2-wheel steering semi-automatic alignment missing from LIN
network (ID no. 6).
21-7F407.0C DSB fault. ManiCrab 4-wheel steering semi-automatic alignment missing from LIN
network (ID no. 7).
21-7F408.0C DSB fault. DSB Boom Suspension missing from LIN network (ID no. 8).

DTC MAIN ECU (SPU 40-26)EN-US(/) 7

-10. DTC MAIN ECU (SPU 40-26)

Fault Code Description

21-7F409.0C DSB fault. DSB front/rear attachment missing from LIN network (ID no. 9).
21-7F40A.0C DSB fault. DSB Road/handling mode missing from LIN network (ID no. 10).
21-7F40B.0C DSB fault. DSB engine memo/speed memo missing from LIN network (ID no. 11).
21-7F40C.0C DSB fault. DSB regeneration missing from LIN network (ID no. 12).
21-7F40E.0C DSB fault. DSB Innovation 1 missing from LIN network (ID no. 14).
21-7F40F.0C DSB fault. DSB Innovation 2 missing from LIN network (ID no. 15).
21-7F410.0C DSB fault. Parking brake DSB missing from LIN network (ID no. 16).
21-7F411.0C DSB fault. DSB Attachment and Tilt neutralization missing from LIN network (ID no.
17).
21-7F413.0C DSB fault. Slope DSB missing from LIN network (ID no. 19).
21-7F414.0C DSB fault. DSB aggression mode missing from LIN network (ID no. 20).
21-7F415.0C DSB fault. DSB ECO Stop missing from LIN network (ID no. 21).
21-7F417.0C DSB fault. DSB counting /weighing missing from LIN network (ID no. 23).
21-7F43C.09 LIN fault. No communications on LIN network.
21-7F501.03 5 V power supply fault (Pin A19). Short to +Batt detected.
21-7F501.04 5 V power supply fault (Pin A19). Short circuit to ground detected.
21-7F502.03 10 V power supply fault (Pin A21). Short to +Batt detected.
21-7F502.04 10 V power supply fault (Pin A21). Short circuit to ground detected.
21-7F503.00 JSM power supply fault. Loss of rollers and switches.
21-7F503.01 JSM grounding fault. Loss of rollers and switches.
21-7F504.00 BMEP power supply or grounding fault. The 4 BMEP analogue channels are less
than 0.1 V or greater than 4.85 V.
21-7F505.00 Boom angle sensor fault (Pin A12, C11). Sensor disconnected or loss of supply
(Channel 1 and Channel 2 less than 0.2 V).
21-7F505.01 Boom angle sensor fault (Pin A12, C11). Loss of ground (Channel 1 and Channel 2
greater than 4.8 V).
21-7F506.01 ECU power supply fault. Loss of VBattP power supply (Pin A07), check 5 seconds
after start-up only.
21-7F507.01 ECU power supply fault. Loss of VBattC power supply (Pin B08 and B09).
21-7F508.01 ECU power supply fault. Loss of VBattD power supply (Pin B03 and B04).
21-7F509.01 ECU power supply fault. Loss of VBattE power supply (Pin C08 and C09).
21-7F50A.05 Sensor common ground fault, Bmep and Rollers connected to SPU (Pin A20). Open
circuit detected.
21-7F50B.00 Carriage angle sensor fault (Auxiliary). Sensor disconnected or loss of supply
(Channel 1 and Channel 2 less than 0.2 V).
21-7F50B.01 Carriage angle sensor fault (Auxiliary). Loss of ground (Channel 1 and Channel 2
greater than 4.8 V).
21-7F601.0C Internal ECU fault. Program error.
21-7F602.00 High temperature SPU ECU fault. Temperature above 110 °C for 30 seconds.
21-7F603.0B SPU ECU fault. Internal voltage out of range.
21-7F604.05 SPU ECU fault. Ground lost.
21-7F605.10 SPU ECU fault. Overvoltage detected.
21-7F606.0B SPU ECU fault. ADC converter voltage out of range or ADC blocked.
21-7F607.02 SPU ECU fault. SPI fault.
21-7F608.10 Overcurrent SPU ECU fault. Total current > 25.5 A for 5 seconds.
21-7F701.02 The ECU configuration is incompatible with the type of ECU (hardware part number).
21-7F702.0E The main ECU is connected in place of the auxiliary ECU or the CAN_id input is
disconnected.

8 DTC MAIN ECU (SPU 40-26)EN-US(/)

 DTC MAIN ECU (SPU 40-26) -10.

Fault Code Description

21-7F704.0E The main ECU is incorrectly configured: conflicting parameters.
21-7F705.0D Stability test fault. The high position angle value does not match the calibrated value.
21-7F706.0D Stability test fault. The high position gage value does not match the calibrated value.
21-7F707.0D Stability test fault. Safety valve didn't cut the movements as expected.
21-7F708.0D Stability test fault. The control valve has not been adjusted correctly or cuts off the
movements.
21-7F709.01 Final Control to be performed with MMP.
21-7F70A.01 Valve bank calibration must be performed (Preferences menu -> Expert -> Valve
bank calibration).
21-7F70B.01 Brake pedal calibration must be performed (Preferences menu -> Expert -> Inching
pedal calibration).
21-7F70C.01 Tilt angle sensor calibration must be performed (Preferences menu -> Expert ->
Carriage angle calibration).
21-7F70D.01 Strain gage and boom angle calibration must be performed (Preferences menu ->
Expert -> Stability calibration).
21-7F70E.01 Tilt meter sensor calibration must be performed (Preferences menu -> Expert -> Tilt
meter calibration)
21-7F70F.01 Enter the serial number with MMP.
21-7F710.0C Vision dashboard internal fault.
21-7F711.07 VS pressure switch fault. The VS is open but no control is requested.
21-7F711.0D Boom angle sensor fault, track 1 outside calibration range. Do a new sensor
calibration
21-7F712.0D Boom angle sensor fault, track 2 outside calibration range. Do a new sensor
calibration
21-7F712.0E Switch to platform rescue mode.
21-7F713.07 Danfoss PVG head status error lifting
21-7F714.07 Danfoss PVG head status error tilting
21-7F715.07 Danfoss PVG head status error telescope
21-7F716.07 Danfoss PVG head status error auxiliary
21-7F717.01 Calibration of valve bank to be carried out. The setpoint/current laws of the valve
bank have not been saved
21-7F718.0C Pressure inconsistency in the clutch housings in relation to steering direction
engaged
21-7F719.01 Calibration of the electrovalve and/or wheel angle sensor of the CSS to be performed
21-7F71A.0D Axle locking cylinder test fault
21-7F71B.01 Access movement speed calibration must be performed (Preferences menu ->
Expert -> Access calibration)

DTC MAIN ECU (SPU 40-26)EN-US(/) 9