Scribd
Upload
19 views1 page

LOREM

Uploaded by

Art Attack
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
19 views1 page

LOREM

Uploaded by

Art Attack
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

8051 has due to the shear number of instructions that make use of the accumulator.

More than half of


the 8051s 255 instructions manipulate or use the accumulator in some way. For example, if you want to
add the number 10 and 20, the resulting 30 will be stored in the Accumulator. Once you have a value in
the Accumulator you may continue processing the value or you may store it in another register or in
memory. The "R" registers The "R" registers are a set of eight registers that are named R0, R1, etc. up to
and including R7. These registers are used as auxillary registers in many operations. To continue with the
above example, perhaps you are adding 10 and 20. The original number 10 may be stored in the
Accumulator whereas the value 20 may be stored in, say, register R4. To process the addition you would
execute the8051 has due to the shear number of instructions that make use of the accumulator. More
than half of the 8051s 255 instructions manipulate or use the accumulator in some way. For example, if
you want to add the number 10 and 20, the resulting 30 will be stored in the Accumulator. Once you
have a value in the Accumulator you may continue processing the value or you may store it in another
register or in memory. The "R" registers The "R" registers are a set of eight registers that are named R0,
R1, etc. up to and including R7. These registers are used as auxillary registers in many operations. To
continue with the above example, perhaps you are adding 10 and 20. The original number 10 may be
stored in the Accumulator whereas the value 20 may be stored in, say, register R4. To process the
addition you would execute the

You might also like