SOLAR MD LOGGER V2
THE HIGH- PERFORMANCE LOGGER V2 PROVIDES
Micro USB
1 2 Scrow 1 2 3 Scroll
Terminal 2
Terminal1

GND
RX
TX
Eth0 WiFi
[+9 65]VDC

Eth1
GND
5VDC2A

(internet) USB2.0 (AP + Station) (Local)

RS485(1)

SIMPLE AND QUICK COMMUNICATION WITH

Logger V2
AUTOMATIC DEVICE DISCOVERY AND CONNECTION

Connection LED
AS WELL AS REMOTE CONTROL AND MANAGEMENT

FEATURES.
System LED
This device comlies with Part15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference recieved,
including interference that may cause undesired operation.
This device comlies with Canadian ICES-003

HIGHLIGHTS
Relay1 Relay2 CAN BUS (1) CAN BUS (2) RS485(1)
( (
3A 30VDC
( 3A 30VDC
(
Terminal 5

Terminal 6

Terminal 7

3A 250VAC 3A 250VAC
HIGH(+)

HIGH(+)
LOW(-)

LOW(-)
Scrow

Scrow

Scrow
GND

GND

GND

120 Ohm 120 Ohm 120 Ohm

COM

COM

Termination Termination Termination

ON

ON

ON

ON

1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
OFF

OFF

OFF
ON

ON

ON

Scrow
Terminal 3,4 ------------- ------------- -------------

• ADVANCED DATA LOGGER WITH MANY INTERFACES

SUCH AS CAN BUS, RS232, RS485, ETHERNET AND

WIFI ( CLIENT AND STATION)

THE SOLAR MD LOGGER V2 IS DESIGNED FOR • QUICK INSTALLATION AND FAST PLUG AND PLAY
MONITORING AND CONTROL OF SOLAR MD ENERGY COMMISSIONING WITH AUTOMATIC DEVICE
STORAGE PRODUCTS AND COMMUNICATES WITH DISCOVERY MECHANISM
SUPPORTED INVERTERS, ENERGY METERS, • NETWORK PROVISIONING WITH DYNAMIC IP
WEATHER STATIONS AND OTHER ENERGY DEVICES. ADDRESSING ( DHCP CLIENT AND SERVER)

• RELIABLE AND SECURE TRANSMISSION OF

LOGGER V2 SERVES AS AN INTERNET GATEWAY TO OPERATIONAL DATA , TO MYPOWER24 PLATFORM
SEND THE DATA TO THE MYPOWER24 MONITORING • REMOTE CONFIGURATION AND MANAGEMENT
PORTAL. CAPABILITIES, INCLUDING FIRMWARE UPGRADES

OVER THE AIR

LOGGER V2 PROVIDES BOTH BATTERY / INVERTER • SIMPLE END- USER UI USING THE MYPOWER24
MANAGEMENT AND CUSTOMER DATA MANAGE- MONITORING PORTAL.
MENT FOR RESIDENTIAL, COMMERCIAL AND • INTEGRATED PROGRAMMABLE RELAYS FOR LOAD
UTILITY PV, BATTERY AND HYBRID SYSTEMS. CONTROL.

[email protected]


SOLAR MD LOGGER V2

Micro USB

1 2 Scrow
Terminal1

5VDC2A

GND

[+9 65]VDC
Eth0
(internet)

1 2

Logger V2
USB2.0 WiFi
3 Scroll
Terminal 2
(AP + Station Eth1

GND
TX
)

RX
(Local)

RS485(1)

Connectio
n LED
This device
Operat ion iscomlie s with Part15 of
subjec t to the
(1) This device the FCC Rules.
follow ing two
System LED
(2) This device may not cause harmfu condit ions:
must accept l
includ ing interfe any interfeinterfe rence, and
Relay1 This device
rence that
may cause rence recieve d,
Relay2 comlies with
undesi red operat
( 3A 30VDC
3A 250VAC
(
( 3A 30VDC( CAN BUS
Canadian
ICES-003
ion.

3A 250VAC (1)
COM

CAN BUS
Terminal 5
ON

ON

Scrow
COM

(2)
ON

1
ON

LOW(-)
GND

HIGH(+)

2 3 1 RS485(1)
Terminal 6

2 3
120 Ohm
Scrow

Scrow Terminatio
n

LOW(-)
GND

HIGH(+)
Terminal 3,4
1 2 3

Terminal 7
OFF

Scrow
120 Ohm
ON

Terminatio
-------------

GND
n

1 2

A
3

B
OFF
120 Ohm

ON
Terminatio
------------- n

1 2 3

OFF

ON
-------------

Logger V2
Serial Port Interface RS232 / RS485 (2500-Vrms Isolation)
CAN BUS CANBUS 1 / CANBUS 2 (2500-Vrms Isolation)
Relay 1 / Relay 2 Dry contact (3A / 250VAC, 3A / 30VDC)
ETHERNET ETHO (Internet) / ETH1(Local)
WiFi AP IEEE 802.11g / DHCP server enabled
WiFi Client (Station) Connection to Internet / DHCP server enabled
Micro USB Charger 5V / 2A
DC Supply 9VDC-65VDC
LED Indication indication for open / active communication
Dimensions (H x W x D) 140mm x 120.5mm x 34mm
Weight 0.634kg
Mounting system Screws through flanges
Ambient temperature -40°C to +85°C
Environmental Protection IP 20
Standard Warranty 1 year

[email protected]