16 Transformer
16 Transformer
1 Delivery Vehicle and Material Transport in public 5 – 15 1 4 4 L Vehicle registered & driver licensed. TSO --- --- --- ------ ----
Plant Management movement area Material controller to monitor deliveries. MC
Crush Provide induction to regular drivers. SM
Collision
2 Lifting & Manual Over hanging Load 5 – 15 6 3 18 M Close supervision, protect the area, use certified lifting SS 2 12 M People crossing into the barricaded SS
Handling Operation Falling Objects tools. area.
Damage to Crane should have current certification. TSO Mechanical failure of lifting SPE
property and Operators should be licensed and banksman authorised. TSO equipments.
equipment Barricade the area of the lift. SS
Environment Hazards Comply with DCA rules & complete their checklist SS
Heat Stress when working with lifting equipments.
Provide sufficient rest breaks and ensure availability of SS
drinking water.
3 Installation of Work at Height 30 6 4 24 M Close supervision and have a Tool Box Talk. SS 2 12 M People crossing into the barricaded SS
Transformer Falling Materials Barricade the area of the work. SS area.
Fall of Persons Crane should have current certification. TSO Mechanical failure of lifting SPE
Material Handling Operators should be licensed and banksman authorised. TSO equipments.
Mechanical Aid Comply with DCA rules and complete their checklist (Even after the implementation of the
Failure when working with lifting equipments. control actions the risk level is
Environmental Hazards No persons should stand below the swing radius of the SS Substantial, so competent supervision
Heat Stress load. must be available through out the period
Physical Injuries Ensure use of P.P.E (Safety, Hamess, Hand Gloves). SS / TSO of execution of the job).
Injuries when Provide sufficient rest breaks and ensure availability of SS
handling sharp drinking water.
objects Installation to be done as per recommendation of the SPE / SS
Slips suppliers
4 Work with Cutting Electrical 5 – 15 1 4 4 L Use only authorised people to work with power tools. SS / TSO 1 4 L Damage to the tools. SS / Operatives.
Machine and Hand Electrocution, 110V to be used for electrical hand tools. SS
Power tools Burns On tape joints in electrical cables, use male-female SS
Physical Hazards socket.
Moving / Rotating As far as reasonably practicable cable should not cross SS
mechanical parts walkways.
Trailing electrical Regular maintenance of all hand tools. SPE
leads Close supervision. SS
Noise and dust Maintain proper housekeeping. SS / TSO
emission Ensure use of P.P.E (Goggles, Car Plugs, Nose Masks, SS / TSO
Environmental hazards Hand Gloves).
Heat Stress Provide sufficient rest breaks and ensure availability of SS
drinking water.
5 Testing of Electrical Hazards 5 1 4 4 L Lock out and Tagging System to be followed during any PM --- --- ---
Transformers Electrocution test or maintenance work
Fire Ensure personnel’s, tool and material are removed from SS / TSO
Burns the rest area before the test starts
Flash The areas to be barricaded and warning signs posted. SS / TSO
AX324-SAF-01
Dubai International Airport Risk Assessment Ref: AX324/RA-016
Risk Assessment Sheet Expansion Phase 2 Rev No: 00
Contract No.: AX324 MMS No.: 10018
Date: 23.07.2005
Page 2 of 2
Risk Classification
Likelihood (L) :
Time:
Continuous 5 hrs. plus 2 to 4 hrs. .25 to 1 hr. 10 min. or less
No. Exposed:
100 plus 6 6 5 4 3
50 to 100 6 5 4 3 3
25 to 50 6 4 3 2 2
15 to 25 6 3 3 2 1
5 to 15 6 3 2 1 1
1 to 5 6 2 1 1 1
Severity (S): Not Harmful (NH) = 1; Slightly Harmful (SH) = 2; Harmful (H) = 3; Extremely Harmful (EH) = 4; Multiple Casualties (M) = 5; Catastrophic (C) = 6
AX324-SAF-01