CHENNAI INSTITUTE OF TECHNOLOGY

Sarathy Nagar, Kundrathur, Chennai-600069

An Autonomous Institute Approved by AICTE and Affiliated to Anna University,
Chennai

DEPARTMENT OF MECHATRONICS ENGINEERING

TELECOM DEPARTMENT IN INDUSTRIAL ROBOT

MAINTAINANCE

A Report on Internship

Department Name

By
Harish T
210421115029

JULY 2023
 CHENNAI INSTITUTE OF TECHNOLOGY
CHENNAI-69

Vision of the Institute:

To be an eminent centre for Academia, Industry and Research by imparting knowledge,
relevant practices and inculcating human values to address global challenges through
novelty and sustainability.

Mission of the Institute:

IM1.To creates next generation leaders by effective teaching learning methodologies and install scienti
IM2.To transform lives through deployment of emerging technology, novelty and sustainability.
IM3.To inculcate human values and ethical principles to cater the societal needs.
IM4.To contributes to wards the research ecosystem by providing a suitable, effective platform for inte
IM5.Tonurtureincubationcentresenablingstructuredentrepreneurshipandstart-ups.
 Vision of the Department:

To Excel in the emerging areas of Mechatronics Engineering by imparting knowledge,

relevant practices and inculcating human values to transform the students as potential
resources to cater to the needs of the industries and society through sustained
automation process.

Mission of the Department:

DM1: To provide strong fundamentals and technical skills in Mechatronics Engineering through effective teaching lea
DM2: To transform the lives of the students by fostering ethical values, creativity, and innovation to become Entrepr
DM3: To habituate the students to focus on sustainable solutions to improve the quality of life and welfare of the soc
DM4: To provide an ambiance for research through collaborations with industry and academia
DM5: To inculcate learning of emerging technologies for pursuing higher studies leading to lifelong learning
 CHENNAI INSTITUTE OF TECHNOLOGY
An Autonomous Institute

CHENNAI-69

CERTIFICATE

This is to certify that the “Internship Report” Submitted by Harish T (Reg

no: 210421115029) is work done by him/her and submitted during 2022-2023
academic year, in partial fulfilment of the requirements for the award of the
degree of BACHELOR OF ENGINEERING in DEPARTMENT NAME, at
Motherson Automotive Technologies & Engineering, Chengalpattu –
Sriperumbudur Road, pondur Village Kanchipuram Dist.

Dr.R.Balamurali, M.Tech, Ph.D

College Internship Coordinator
Internal Examiner

Head of the Department

External Examiner

Department Internship Coordinator

 Internship Review Evaluation/Comments

Marks
Sl No. Criterion Max. Marks
Allotted

1. Regularity in maintenance of the diary. 10

2. Adequacy & quality of information recorded 10

3. Drawings, sketches and data recorded 10

4. Thought process and recording techniques used 05

5. Organization of the information 05

6. Originality of the Internship Report 10

Adequacy and purposeful write-up of the Internship

7. 10
Report
Organization, format, drawings, sketches, style,
8. language etc. of the Internship Report 10

Practical applications, relationships with basic theory

9. 10
and concepts

10. Presentation Skills 20

Total 100

ExternalInternshipAdvisor'sName:

Company:

Date: Signature
 SPACE FOR PASTING
INTERNSHIP LETTER FROM
COMPANY ACCEPTING THE
STUDENT TO DO THE PROJECT
(In company’s letter head)
(Studentmusttakephotocopyoftheletterfor
referenceanduse).
 ACKNOWLEDGEMENT

First, I would like to thank Mr. Anbarasan , HR, of Motherson Automotive

Technologies Engineering, Chennai for giving me the opportunity to do an
internship within the organization.

I also would like all the people that worked along with me MATE-U3,
Sriperumbudur with their patience and openness they created an enjoyable
working environment.

It is indeed with a great sense of pleasure and immense sense of gratitude that I
acknowledge the help of these individuals.

I am highly indebted to our Chairman Shri. P. SRIRAM and Principal Dr. A.

RAMESH, M.E., Ph.D, for the facilities provided to accomplish this
internship.

I would like to thank Dr.R.BALAMURALI, M.Tech, Ph.D, College

internship coordinator and DR. M. Baskar, internship coordinator Department
name for their support and advices to get and complete internship in above said
organization.

I am extremely great full to my department staff members and friends who

helped me in successful completion of this internship.

Harish T
210421115029

PREFACE
 I students of Department of Mechatronics Engineering require to do
An Industrial Internship to enhance my knowledge. The purpose of Industrial
Internship is to acquaint the students with practical application of theoretical
concept taught to me during my course period.

It was a great opportunity to have close comparison of theoretical concept in

practical field. This report may depict deficiencies on my part but still it is an
account of my effort.

The output of my analysis is summarised in a shape of Industrial Internship the

content of report shows the details of sequence of these. This is my Industrial
Internship report which I have prepared for the sake of my First Industrial
Internship. Being an engineer, I should help the society for inventing something
new by utilising my knowledge which can help them to solve their problem so
for this I am working in Motherson Automotive Technologies &
Engineering, Chengalpattu – Sriperumbudur Road, pondur Village
Kanchipuram Dist.

ABSTRACT
 Content
Chapte Tittle Page No.
r No
1. Introduction
2. Injection Moulding
3. Blow Moulding
 WEEKLY OVERVIEW OF INTERNSHIP ACTIVITIES

Date Day Wok done

22/05/2023 Monday Introduction, visiting Telecom Division
23/05/2023 Tuesday Visited injection moulding process
1st Week

24/05/2023 Wednesday Learned about Working process of machine

25/05/2023 Thursday Learned about the Toshiba injection
moulding machine
26/05/2023 Friday Learned about the Toshiba injection
moulding machine

Date Day Wok done

29/05/2023 Monday Learn about the Automatic Guide Vehicle,
ARBurg injection moulding
30/05/2023 Tuesday Learn about the Moulded Temperature
2nd Week

controller
31/05/2023 Wednesday Learn the process of Pin and grommet
machine
01/06/2023 Thursday Learn the process of Pin and grommet
machine
02/06/2023 Friday Analysing the output product of machine

Date Day Wok done

05/06/202 Monday Observe the process of 6-Axis Robot
3
06/06/202 Tuesday Learn About the Program of 6-Axis ABB
3rd Week

3 Robo
07/06/202 Wednesday Learn About the Engel Injection Moulding
3 Machine
08/06/202 Thursday Work With Injection Moulding Machine
3
09/06/202 Friday Work with Pin and Grommet Machine
 3

Date Day Wok done

12/06/202 Monday Visited the Domestic Divison
3
13/06/202 Tuesday Learn How to Clamp the Mould in Machine
4th Week

3
14/06/202 Wednesday Learn the Input Operation of Injection
3 Machine
15/06/202 Thursday Visited the Blow Moulding Machine
3
16/06/202 Friday Working with Engineers to Automated the
3 wrapping Machine

Date Day Wok done

19/06/2023 Monday Created an Design for conveyor Belt
20/06/2023 Tuesday Learn the Program of Kawasaki 6 – Axis
5th Week

Robo
21/06/2023 Wednesday Learned about the Jogging of ABB
22/06/2023 Thursday Learn about the Epson Working Operation
23/06/2023 Friday Leave Taken For Extend our internship
Duration

Date Day Wok done

26/06/202 Monday Visited the Export Divison
3
6th Week

27/06/202 Tuesday Inspect the short fill of the Handle

3
28/06/202 Wednesday Learn the Types Granules Material for
3 Injection machine
29/06/202 Thursday Learn the working of Bowl feeder Machine
 3
30/06/202 Friday Bakrid Holiday
3

Date Day Wok done

01/07/202 Monday Inspect the DrawBack the Bowl Feeder
3 Machine
02/07/202 Tuesday Create an small program of abb 6 Axis robo
7th Week

3
03/07/202 Wednesday Checking the quality of Output product of
3 Injection Moulding Machine
04/07/202 Thursday Create an project of Automation of an
3 Granulator
05/07/202 Friday Create an project of Automation of an
3 Granulator

Introduction

Problem statement

Methodology

Observation Done

Things identified as inefficient / unskilled. Things that can be automated.

Projects carried out if any

Photographs taken in company

Complete analysis of Project done

Technology Used

Project photos

Conclusion

PO &PSOAttainment

PO.No Graduate Attribute Attained Justification

PO 1 Engineering knowledge Yes / No

PO 2 Problem analysis Yes / No

Design/Development of
PO 3 Yes / No
solutions

Conduct investigations
PO 4 Yes / No
of complex problems

PO 5 Modern Tool usage Yes / No

PO.No Graduate Attribute Attained Justification

The Engineer and

PO 6 Yes / No
society

Environment and
PO 7 Yes / No
Sustainability

PO 8 Ethics Yes / No

Individual and team

PO 9 Yes / No
work

PO 10 Communication Yes / No

Project management
PO 11 Yes / No
and finance

PO 12 Life-long learning Yes / No

PSO.No Graduate Attribute Attained Justification

To analyze, design and
develop solutions by
PSO 1 applying the concepts of
Robotics for societal and
industrial needs.
To create innovative
ideas and solutions for
real time problems in
PSO 2
Manufacturing sector by
adapting the automation
tools and technologies.
Note: The report must consist of at least 30 pages excluding Front and
Back cover