DEPARTMENT OF MECHANICAL ENGINEERING

U24GE101 - ENGINEERING DRAWING

INDIVIDUAL ASSIGNMENT-1
YEAR / SEM: I / I Total Marks: 40
Date of Issue: 01.10.2024 Branch: Civil Engineering Date of submission: 07.10.2024
S. Register
Name of the student Questions
NO Number
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
1 2024050003 Amirthavalavan S surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45o to
HP. Draw the projections when the diagonal through
2 2024050011 Dhanush Maran M the corner resting on HP makes an angle of 60o with
VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
 its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
3 2024050010 Gowreesh C V
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
4 2024060009 Haripriya Y diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
5 2024050013 Ilakkiya V
its shorter side on H.P. and inclined at 30° to V.P. Its
surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
 resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60o with
6 2024110014 Indhumathi L VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
7 2024040024 Manoj B
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
8 2024050005 Nivetha K
35mm rests on the ground on one of its corners with a
diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
 70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
9 2024050009 Prem Kumar P surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60o with
10 2024050007 Sathriyan T VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45o to VP. The surface of
11 2024050008 Thmizhbharathi P the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
 4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
12 2024050012 Valarmathi S diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
13 2024050006 Venkatesh K surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
14 2024050014 Kavipriyan D of its corners on HP and the surface inclined 45o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60o with
VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.

FACULTY INCHARGE
G.MURUGAN, AP/MECH