DEPARTMENT OF MECHANICAL ENGINEERING

U24GE101 - ENGINEERING DRAWING

INDIVIDUAL ASSIGNMENT-1
YEAR / SEM: I / I Total Marks: 40
Date of Issue: 01.10.2024 Date of submission: 07.10.2024
S.
Student ID Name of the student Questions
NO
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
1 2024040045 Anandhan A surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
2 2024040035 Arikrishnan K 10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
 its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
3 2024040001 Ashok Kumar K
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
4 2024040012 Balu V diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
5 2024040038 Bharanidharan S 10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
 resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
6 2024040026 Dhanish R VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
7 2024040046 Dhanush R
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
8 2024040030 Dhanush S 10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
 70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
9 2024040018 Dharneshwaran K surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
10 2024040031 Dinakaran S VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
11 2024040040 Iyyappan K 10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
 4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
12 2024040008 Jaganathan T diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
13 2024040011 Janaseelan S surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
14 2024040016 Jayasurya D 10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
 tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
15 2024040036 Logeshwaran S
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
16 2024020015 Manikandan G diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
17 2024010020 Manikandan M 10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
 50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
18 2024040023 Manoj S VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
19 2024040017 Meganathan S
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
20 2024010011 Mohanraj M 10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
diagonal containing that corner is inclined 400 to HP
and 500 to VP.
 3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
21 2024040007 Mohanram P surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
22 2024040027 Monishraj C VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
23 2024040050 Moonesraj N 10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
 distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
24 2024040047 Mukesh M diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
25 2024040002 Mussaraf Khan H surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
26 2024040025 Nagaraj T 10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
 VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
27 2024040020 Nishanth P
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
28 2024010001 Nishanth R diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
29 2024040041 Niviraj A 10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
 its shorter side on H.P. and inclined at 30° to V.P. Its
surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
30 2024040042 Pandiyan A VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
31 2024040028 Prakash R
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
32 2024040019 Praveen K 10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
 2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
33 2024040014 Prem Kumar A surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
34 2024040034 Rajavel S VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
35 2024040004 Rogan K 10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
 one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
36 2024040015 Sanjay K diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
37 2024040021 Santhosh G surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
38 2024040005 Srikanth K 10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
 2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
39 2024040010 Sudhakar K
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
40 2024040039 Surendar M diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
41 2024040033 Udhayanithi T 10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
 beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
42 2024040048 Vasin P VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
10 Marks:
1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
43 2024040013 Vijayabaskar K
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
44 2024040049 Vijaykumar M 10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
 HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
45 2024040022 Vishalkumar R surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
46 2024040044 Vishwa A VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.
47 2024110043 Neelamegan J 10 Marks:
 1. Draw the involute of a circle of 40mm diameter.
Also draw a tangent and normal to the curve at a point
95mm from the centre of the circle.
2. A pentagonal plate of side 20mm rests on the HP on
one of its sides inclined at 45 o to VP. The surface of
the plate makes an angle of 30o with the HP. Draw the
front view and top view of the plate.
3. Draw a curve when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
60mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 50mm from the
directrix.
4. A hexagonal pyramid of base side 30mm, axis
height 60mm is resting on HP on one of its base edges
with its axis inclined at 40˚to HP and parallel to VP.
Draw the projections of the pyramid by change of
position method.
10 Marks:
1. A line PQ 60mm long has its end P, 15mm above
HP and 20mm in front of VP. Its top view and front
view measures 50mm and 40mm respectively. Draw
its projections and determine its true inclinations with
H.P. and V.P.
2. Draw the projections of a square plane of side
35mm rests on the ground on one of its corners with a
48 2024040052 Dhilipkumar M diagonal containing that corner is inclined 400 to HP
and 500 to VP.
3. Construct a parabola given the distance of the focus
from the directrix as 50mm. Also draw tangent and
normal to the curve from any point on it.
4. A pentagonal prism of base 30mm and axis length
70mm is resting on HP on one of its edges of the base,
in such a way that the base makes an angle of 45˚ with
HP. Draw its projection, if the axis is parallel to VP.
10 Marks:
1. A coin of 40mm diameter rolls over a horizontal
table without slipping. A point on the circumference
of the coin is in contact with the table surface in the
beginning and after one complete revolution. Draw the
path traced by the point. Draw a tangent and normal at
any point on the curve.
2. A rectangular plate of side 50 x 25 mm is resting on
its shorter side on H.P. and inclined at 30° to V.P. Its
49 2024040053 Vishwanathan A surface is inclined at 60° to H.P. Draw its projections
3. Draw an ellipse when the eccentricity is 2/3 and the
distance of the focus from the directrix is equal to
50mm. also draw a normal and tangent to a point on
the ellipse which is at a distance of 70mm from the
directrix.
4. A cylinder of diameter 30mm and axis length 60 is
resting on the HP on a point so that its axis is inclined
at 45o to the HP and parallel to VP. Draw its top view
and front view.
 10 Marks:
1. A straight line 55mm long makes an angle of 30 o to
the HP and 45o to the VP. The end A is 15mm above
hp and 12mm in front of VP. Draw its projections.
2. A regular hexagon of side 30mm is resting on one
of its corners on HP and the surface inclined 45 o to
HP. Draw the projections when the diagonal through
the corner resting on HP makes an angle of 60 o with
50 Ezhilarasan P VP.
3. Construct a parabola with the distance of the focus
from the directrix as 60mm .Also draw a normal and
tangent to the curve at a point 50mm from the
directrix.
4. A hexagonal prism of base side 30mm, axis height
50mm is resting on HP on one of its base corners with
its base inclined at 35˚ to HP and parallel to VP. Draw
the projections of the prism.

FACULTY INCHARGE
G.MURUGAN, AP/MECH