Occupational Health and Safety
Learning Objective:
After reading this INFORMATION SHEET, YOU MUST be able to identify and apply OHS policies and
procedures in Computer Systems Servicing.
A. Workplace
1. Contingency measures during workplace accidents, fire and other emergencies are recognized.
2. Hazard/risks in the workplace and their corresponding indicators are identified to minimize or
eliminate risk to co-workers, workplace and environment.
3. Clean the area before and after using it to maintain sanitation and prevent accidents.
B. Computer systems
1. Always power off and unplug the computer before working on it. When making circuit changes
switch off and unplug the power cord from the equipment then discharge the capacitors.
2. Replace only fuses with those proper ratings (usually on AVRs).
3. Handle all sensitive components in a non-conducting metallic edge.
4. Check all signal pins and alignment to avoid incorrect connection.
5. Be careful with the sharp edges inside the computer case.
6. Do not use excessive force when installing computer components to prevent damage.
7. Do not clean your system with wet clothes or any liquid detergents.
8. Use a brush, compressed air, or blower to clean the computer system.
C. Technician
1. Personal protective equipment is correctly used in
accordance with organization OHS procedures and practices.
2. Always discharge yourself before touching any part of the computer.
3. Use anti-static devices and rubber footwear to disperse static electricity.
4. Do not eat, drink or smoke when working on your computer.
5. do not wear loose clothing
