0% found this document useful (0 votes)
113 views57 pages

VMS Manual

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
113 views57 pages

VMS Manual

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 57

VMS Video Monitoring Platform User Manual

VMS Video Monitoring

Platform User Manual


VMS Video Monitoring Platform User Manual

Foreword

This manual may contain technically inaccurate areas, or areas that do not correspond to product
features and operations, or typographical errors.The content of this manual will be updated
according to the enhancement of product features, and will periodically improve or update the
products or programs described in this manual. The updated contents will be added in the new
version of this manual without prior notice.
VMS Video Monitoring Platform User Manual

directory
VMS Video Monitoring Platform User Manual.................................................................................1
Foreword...........................................................................................................................................2
1 Software installation and operating environment.........................................................................5
1.1 Overview.............................................................................................................................5
1.2 Operating environment......................................................................................................5
1.3 Software Installation..........................................................................................................6
1.4 Software Uninstall...............................................................................................................7
2 instructions.................................................................................................................................... 7
2.1 Software registration...........................................................................................................7
2.2 soft login..............................................................................................................................8
3 preview function..........................................................................................................................13
3.1 Interface introduction.......................................................................................................13
3.2 Live Preview......................................................................................................................15
3.3 Device Tree and View........................................................................................................19
3.4 PTZ function......................................................................................................................22
3.5 Window Segmentation......................................................................................................25
4 Add equipment............................................................................................................................26
4.1 Search Add Device.............................................................................................................26
4.2 Manually Adding Devices..................................................................................................28
4.3 Modifying Device Information..........................................................................................29
4.4 Delete Device and Device Configuration...........................................................................30
5 device configuration.....................................................................................................................30
6.Playback.......................................................................................................................................31
6.1 Interface introduction.......................................................................................................32
6.2 Playback Device Recording................................................................................................33
6.3 Playback Local Recording..................................................................................................36
7 Round trip plan............................................................................................................................38
7.1 Configure round robin plan...............................................................................................38
7.2 Carry out the round plan...................................................................................................41
8 Logs..............................................................................................................................................42
8.1 Operation log....................................................................................................................42
8.2 Alarm Log..........................................................................................................................43
9 digital map...................................................................................................................................43
10 Event..........................................................................................................................................45
11 Event configuration....................................................................................................................45
12 Video plan..................................................................................................................................48
12.1 Add channel....................................................................................................................48
12.2 Video plan.......................................................................................................................49
13 User configuration..............................................................................................................50
VMS Video Monitoring Platform User Manual

13.1 Role management...........................................................................................................50


13.2 User Management..........................................................................................................51
14 System Configuration.................................................................................................................52
VMS Video Monitoring Platform User Manual

1 Software installation and operating

environment.

1.1 Overview

Applicable to security monitoring equipment management software for small network


monitoring field.
Based on windows platform, can run on PC.
Cameras that can browse multiple devices monitor video in real time.
Can view multiple device's camera video and you can playback video.
Electronic maps can be configured to clearly describe the location of various devices.
Configure alarm setting items for network video monitoring equipment to realize alarm linkage
between management software and monitoring equipment.
Video automatic backup function, mainly used in back-up data backup of IPC and other non-hard
disk devices.
For each device, each device window, each device channel can establish a monitoring plan.
Create a separate configuration file for each user, and their respective habits and styles do not
interfere with each other.
Operation management interface supports Chinese and English languages.

Note: This software is for connecting multiple different types or models of devices
(NVR/HVR/DVR/DVS/IPC). This user manual only describes the software operation. Please refer to
the relevant product manual for the function settings of specific devices.
This manual is provided for those responsible for planning, executing, or reviewing the hardware
installation of the network video surveillance software. You should have the basic operating
knowledge and experience of related equipment (NVR/HVR/DVR/DVS/IPC).

1.2 Operating environment

operating Windows2000/xp/2003/Vista/Windows 7/
System Windows 8/Windows 10System
VMS Video Monitoring Platform User Manual

CPU Above 2.4GHz

RAM 1G or above

Monitor 1024*768 resolution display


VMS Video Monitoring Platform User Manual

Must support hardware scaling (such as ATI, TNT2 PRO),


video It is recommended to use ATI9800 and above graphics
Card, dual channel, memory 128M above/128b

Network 100/1000M
card

If the management software needs to manage a lot of


Decoded channel pictures, it is recommended that the
Note memory, graphics card, and CPU have better
configurations.

1.3 Software Installation

Step one: Double-click the VMS software installation package, and the installation interface appears
as shown in the figure below.

Step two: Click "Next", select the software installation path, the default path "C:\Program Files \
VMS"
VMS Video Monitoring Platform User Manual

Step 3: Click Next and wait for the installation to complete. Click Finish to exit

Note: If the computer has a different version of VMS installed, it is recommended to uninstall the
original version of the VMS, and then follow the above installation process for software installation.

1.4 Software Uninstall

Method One: Click [Start] [Programs] [VMS] [Uninstall VMS] Uninstall software will delete. For all
related files, it is recommended that you back up the video files and screenshot before uninstalling
to avoid being deleted.

Method 2: Go to the system control panel and select [VMS]. Select “Delete”. Uninstalling the
software will delete all related files. It is recommended that you back up the video files and
screenshot before uninstall to avoid being deleted.
VMS Video Monitoring Platform User Manual

2 Instructions

2.1 Software registration

Step one: Double-click the VMS shortcut generated on the desktop, the registration screen
appears, enter the admin password, confirm the password, and click Next.

Step 2: Enter the password protection problem (forgot password to retrieve admin password),
and click Finish.
VMS Video Monitoring Platform User Manual

2.2 Soft login

Step 1: Double-click the desktop generated VMS shortcut, the login screen appears, enter the
user name, password, check the login interface under the "save information", you can save the user
name and password, check the "Auto Login", next time you can directly log in Without entering a
username and password. (Forget your password by clicking on the blue "forgot password" below
the login page to retrieve your password).
VMS Video Monitoring Platform User Manual

Step 2: Click "Login". After the user passes the verification, enter the main program, as shown
below:
VMS Video Monitoring Platform User Manual

No. Name Instructions

1 Feature tab
Click to add the "new
function page" tab, in the
new function also click the
corresponding function to
enter the corresponding
function interface, while
the tab name is updated to
the function name.
2 Event Management
❶ And , click to
switch the alarm sound or
silent.

❷ , indicates the
number of alarm
3 User Management
❶Click to select the
VMS Video Monitoring Platform User Manual

lock screen and lock the


screen.

❷Click to select
Switch User and Switch
Login User.

❸Click to select the


help manual and open the
help manual.

❹Click select About,


show version information.
4 System Management
❶Click to enter the
"System Settings" interface.
Support,system
configuration such as basic
configuration, alarm and
language,device
management, etc.
❷Click to display the
CPU and memory usage of
the system. If the CPU
usage is too high, the icon
turns red.
5 Window Management
❶Click to minimize
the software window. 

❷Click to maximize
the software window. 

❸Click to exit the


software.
6 Function List The function list is
divided into an operation
area, a search area, and a
configuration area.
Functions are provided as
shown below.
❶Preview 
Access the camera for
VMS Video Monitoring Platform User Manual

real-time browsing video.


During the browsing
process, local video
recording, picture capture,
audio activation, voice
intercom, instant playback
video, video amplification,
video stream switching,
device parameter
configuration, alarm output
configuration, channel
information update, logout,
video window display
mode, and video setting
Aspect ratio, save the view,
open the round tour,
control the PTZ, create new
groups, control the dome
and other operations.
❷Events 
Support for viewing,
processing, and annotating
events.
❸Playback 
Supports playback and
export of device videos,
device pictures, local
videos, and local pictures.
❹Electronic map
Through the electronic
map, you can intuitively
understand the location of
the video channel or alarm
channel.
❺Log 
Support for querying and
exporting system logs and
operation logs.
❻Equipment
management
Supports searching and
adding devices, importing
or exporting device
VMS Video Monitoring Platform User Manual

information in batches, and


modifying and
deleting,device
information.
❼Equipment
configuration
It supports camera
parameters,network
parameters,event,paramet
ers, storage parameters,
and system parameters of
the camera.
❽Event Settings
The supported alarm
types include device
alarms, and also support
for setting alarm
notifications and alarm
linkage videos.
❾Planning plan
Supports configuration
and management of
rotation training programs.
❿Video plan 
Support to set the timer
recording period and video
recording channel.

3 Preview function

3.1 Interface introduction

According to the area introduced the various parts and functions of the interface.
Click , and select Preview on the New Features interface. The Preview interface is displayed.
VMS Video Monitoring Platform User Manual

No. Name Instructions

1 The device list Contains the device tree and the view
area module.
❶ The device list supports management
devices (rename groups and deletion
groups), code stream switching, device
configuration, and synchronous intercom
operations.
❷Adding groups, deleting view groups,
renaming view groups, and deleting views
are supported in the view list.
2 Preview Browse the video area, the number of
area windows supports multiple ways of
segmentation.
In the process of previewing the video, it
supports capturing images and videos, and
supports operations such as turning round
robin, voice intercom, and area zooming. For
details, see "4.2 Live Preview."
3 PTZ control The access device supports the PTZ
VMS Video Monitoring Platform User Manual

zone function, so PTZ control can be performed in


the changed area. For details, see "4.7 PTZ
Settings".
4 View creation When there are many access devices and
area it is often necessary to preview multiple fixed
device monitoring screens at the same time,
the preview window for opening multiple
device previews is saved as a view, and the
preview is subsequently previewed, the
preview of multiple devices in the view is
enabled .
The created view is added to the view tab
of the device list area.
5 Patrol Control When there is a roving plan, you can
Area quickly select the roving plan in this area and
start the roving tour.
6 Window Split Adjusts the number of windows, pages,
Control Area and full screen. For detailed operation,
please refer to
"4.7 Window Segmentation".

3.2 Live Preview

Real-time view camera captures video data, supports local recording, capture, open audio, and
zoom in during the process.
The following methods are supported to enable preview:
Select the preview window and double-click the device to be previewed in the device list area.
Drag the device that needs to be previewed in the device list to the preview window.
If you open the preview of the view, you can enable the preview of all the cameras under the view
at the same time.
VMS Video Monitoring Platform User Manual

Click to start recording, click again to close.

Click on the screenshot.

Click to close the audio and click Close again.

Click to open the area to zoom in, click again to close.


Zoom in using the area, click the left mouse button to drag and release the mouse.

Click to close the video.


You can also use the right mouse button to pop up a directory window for operation.
VMS Video Monitoring Platform User Manual

Analog PTZ:
1. Click on the analog PTZ on the window to open this function.
2. Press the left mouse button and drag the mouse to rotate the head to the direction of the drag.
3. Click on the analog PTZ on the window again to turn off the function.
Picture Adjustment: Click on the picture adjustment in the window to open the picture
adjustment window.
VMS Video Monitoring Platform User Manual

Click Default Restore Default Properties.


remote control:

1. Open the remote control channel, right mouse button Po-pup directory as shown above.
2. Select to open the remote control for remote control.
VMS Video Monitoring Platform User Manual

3. Click to close the channel or press ESC to exit full screen to close the remote control.

3.3 Device Tree and View

Device tree:

Right-click the blank area to create a new group and enter the Add Group interface as shown
below.
VMS Video Monitoring Platform User Manual

Right-click on the group to delete groups and edit groups (rename).

Right-click on the device to display device-related operations (synchronization time, intercom,


etc.)

Click on the device configuration to enter the device configuration interface.


view:
The view group related operations are the same as the device group.
When there are many access devices and it is often necessary to preview multiple monitoring
screens of the fixed device at the same time, the preview window for opening the multiple device
preview is saved as a view, and the preview is subsequently previewed, that is, the preview of
multiple devices in the view is enabled.
Save view related operations:
1. Click the View button. The location of the view button is as shown in the figure below.
VMS Video Monitoring Platform User Manual

2. Enter the view name, select the view group, click the OK button, and save the view.
VMS Video Monitoring Platform User Manual

3.4 PTZ function

PTZ control moves in 8 directions, zoom, zoom, iris, step, and more functions
Click to select the window to open the video (the window has a blue border) to control the PTZ
(the channel's PTZ settings will not be described)
1. [Direction Control]: respectively control the PTZ up, down, left, right, the mouse is pressed and
kept as always controlled, released as stop control;

2. [Mouse Simulation]: Click to open the mouse simulation, and simulate the mouse in the
right window of the video window.
3. "Magnification" adjusts the zoom control of the PTZ camera lens;

Click to reduce the zoom lens, click to enlarge the zoom lens multiple;
4. [Focus] Adjust the focus of the control PTZ camera lens.

Click the PTZ to zoom out and click the PTZ focus to zoom in;
5. [Aperture] Adjust the aperture of the PTZ camera lens.

Click PTZ aperture to zoom out, click PTZ aperture to zoom in;
6.[Step size]Adjust the step length to control the top, bottom, left and right of the PTZ, and the

speed when cruising; Drag the dot to set the step, and the mouse
pauses to display the step;
7. [Preset Point] By setting a preset point, you can quickly switch the camera to the position
corresponding to the preset point.
VMS Video Monitoring Platform User Manual

Click to jump to the preset position you have set.

Click to enter the interface for setting preset points.

Click to return to the original interface.


Click Save Presets.

Click to delete presets.


8. [Cruise] By setting the cruise, the camera will cruise between different presets.

Click to open cruise.

Click to open the settings cruise window.


Set the cruise method:
Step 1 Set the cruise number and cruise name.
VMS Video Monitoring Platform User Manual

Step 2 Select the preset point in the Preset column and enter the time in the Time column.
You need to set at least two "preset points" to set the cruise.

Step 3 Click to increase the row, click to delete the row.


Step 4 Click OK to save the cruise.

9. [Horizontal rotation] Click to turn on horizontal rotation.

10. [Horizontal rotation] By setting two boundaries, the camera is rotated repeatedly between
two boundaries.

Step 1 Use the PTZ direction control to turn the PTZ left to the desired position and click to
set the left boundary.

Step 2 Use the PTZ direction control to turn the PTZ right to the desired position and click to
set the right boundary.

Step 3 Click , and the camera rotates repeatedly between the two boundaries.
11. [Surveillance] It records the user's operation to rotate the camera. It can make the camera
rotate according to the recorded track.

Step 1 Click to start setting the patrol and zoom, focus or rotate the camera.

Step 2 Click to finish the patrol setup.

Step 3 Select the required patrol number, click , and the camera rotates according to the
recorded trajectory.
VMS Video Monitoring Platform User Manual

3.5 Window Segmentation

Click to enter the standard 1 window, 4 window, 6 window, 9 window, 16


window mode respectively.

Click , Previous Page.

Click , next page.

Click to display in full screen, press ESC to exit the full screen.

Click to select more window split modes.

10 standard divisions, 10 custom divisions. Click to switch the split mode.


Click Set Custom Split.
VMS Video Monitoring Platform User Manual

4 Add equipment

VMS supports a variety of ways to add devices. Add devices based on the number of added
devices and device protocols.

4.1 Search Add Device

You need to add devices in batches or do not know the device IP address. It is recommended that
you add devices by searching for them.
On the Device Management page, click Auto Search.
The system displays the "Auto Search" screen as shown in the figure below.
VMS Video Monitoring Platform User Manual

The device model can select the device to search, click Search, the system displays the search
results. (The added device will not be displayed).

Select the device you want to add, click Add, and the pop-up is added. Click OK to pop up the
login information, enter the user name, and password to add the device.
VMS Video Monitoring Platform User Manual

Select the device to be modified, and click to enter the modify device IP interface,
enter the user name, password, new IP address, modify the IP.

4.2 Manually Adding Devices

Add a single device and support the device's IP address or domain name or cloud ID. It is
recommended that you add devices manually.
VMS Video Monitoring Platform User Manual

The adding method is changed to LT cloud or TS cloud to add devices through the cloud.

Enter (select) the appropriate information and click Add to add the device.

4.3 Modifying Device Information

Incorrect username or password You can modify the correct user name or password by modifying
the device information.
VMS Video Monitoring Platform User Manual

Click to enter the modify page, enter the new username and password, and click Save.

4.4 Delete Device and Device Configuration

Click to delete the line device.

To delete devices in batches, tick the check boxes of the devices to be deleted, and click and
to delete all checked devices.

Click to enter the device configuration interface. The device that is not logged in is displayed

and cannot be clicked.


VMS Video Monitoring Platform User Manual

5 Device configuration

The device configuration can obtain and modify the configuration information of the device. You
can access the device configuration by right-clicking the device tree in the preview interface or enter
it through the device management interface. (Different equipment and equipment management
interface functions are different, please take the actual total energy as the main)

Operation mode: (take encoding configuration as an example)


1. Select the type to modify. Click System Configuration, then click Code Configuration to enter
the code configuration interface.
2. Modify the content to be modified.
3. Click Save to save the modified content. Click Refresh to regain configuration information.

6.Playback

You can play back and export device videos, device pictures, local videos, and local pictures.
VMS Video Monitoring Platform User Manual

6.1 Interface introduction

No Name Introduction

1 Video Source Select to query video on the local or device

2 Device tree Select device to query video

3 Query conditions Select the filter conditions for the query

4 Query button Query and click to pop up the query result


VMS Video Monitoring Platform User Manual

5 Video display area

6 Download button Display download progress information

7 Open button Opens a locally saved video through Explorer

8 Snapshot button Keeps the current picture on the video window

9 Video button save the video on the device to the local time

10 Slow down button Slows playback

11 Play button Play or pause video

12 Stop button Stop all playing videos

13 Quick release button Quick release button to speed up the play order

14 Sound Sound Adjust playback sound

15 Window mode Switch window split mode


VMS Video Monitoring Platform User Manual

6.2 Playback Device Recording

Prerequisites: There is a device recording on the channel.

Steps:
1. Select the Devices tab on the Playback screen.
2. Select the device channel in the "Device Tree" (check box).
3. Select “Video” in the query conditions, then select the video type, stream, and time, and
click Search.
4. After the query, if there is a video timeline as shown in the figure below, double-click the
timeline to display the video for that time. (Playback by time).

5. Click on the query result to enter the video file playback list, select the desired file, and click
"play". Note: If you select multiple playback, instead of opening all files at the same time, play each
file in order. (playback by file)
VMS Video Monitoring Platform User Manual

6. If you select Download in the figure above, you can download the file to your local computer.

Click to enter the download interface and check the download progress. )

7. If you select a picture in the search criteria and select the time, you can view the device
capture.
VMS Video Monitoring Platform User Manual

6.3 Playback Local Recording

Prerequisites: There is a device recording on the channel. (For details, see 3.2 Real-time preview)
Steps:
1. Select the Local tab on the Playback screen.
2. Select the device channel in the "Device Tree".
3. Select “Video” in the query conditions, then select the video type, stream, and
time, and click Search.
4. In the query results page, select the file to play.

5. If you select a picture in the search criteria and then select the time, you can view
the local capture.
VMS Video Monitoring Platform User Manual
VMS Video Monitoring Platform User Manual

7 Round trip plan

7.1 Configure round robin plan

1. Enter the roving plan page to create a new roving plan.

2. Double-click to rename (default name is new rotation plan).

3. Click to add the rotation training task to the selected round


robin plan and enter the task editing interface.
VMS Video Monitoring Platform User Manual

4. Name the rotation training task (default name is


new task).

5. Set the task dwell time (when performing


round robin plan, the next task will be played when the task dwell time ends).

6. Set the number of polling windows.


7. Drag the channel of the left device tree to the corresponding window to add a video
channel.

8. Set the default dwell


time and stream type for dragging into the video channel.
9. If you want to modify the dwell time or stream type after adding a video channel, double-
click the cell to modify it.

10. The video channel can be deleted by adjusting the order of the video channels in the task.
VMS Video Monitoring Platform User Manual

11. Repeat 7, 8, 9, 10 to add video channels.

12. Finally, the task's dwell time must be changed. If the task dwell time expires, the next
video channel will not be played again. Instead, the next task will be executed. Therefore, the figure
above should modify the task dwell time to a value greater than 30. Otherwise, the task cannot be
played.
13. Click Save to save the rotation task.

14. Double-click the task name to modify the task name, click to delete the task, click
to re-enter the task editing interface.
15. Repeat 3 operations to continue adding patrol tasks
VMS Video Monitoring Platform User Manual

16. Dragging a task to another task can swap the order of execution of the two tasks.

7.2 Carry out the round plan

1. Open the preview interface and select the rotation training plan to be executed in the polling
control area (see 3.1 for the specific location).

2. Click to start the round plan and click again to close.


VMS Video Monitoring Platform User Manual

8 Logs

8.1 Operation log

1. Select the operation log in the log type .


2. Set the end time of the start time and click on Search.
3. Click the Export button to export the contents of the table as an XML file.
VMS Video Monitoring Platform User Manual

8.2 Alarm Log

1. Select the alarm log in the log type.


2. Set the start time, end time, alarm type, device name, click Search.
3. Click the Export button to export the contents of the table as an XML file.

9 Digital map

The electronic map can clearly show the location of the managed device.
VMS Video Monitoring Platform User Manual

How to create an electronic map.


1. Click the Add Picture button to bring up the dialog box shown below.

2. Click the picture preview to select a picture, enter a picture name, picture description, and
click OK to add the picture.
3. Double-click the added picture to open the map.
4. Drag the camera from the device tree to its location, and drag the other maps from the map bar
to where the map is located (such as, drag the Riverside map to the Hangzhou map). If you hover
over the hot spot, the mouse will show the close button and delete the hot spot.
VMS Video Monitoring Platform User Manual

5. Click Save to save the edit, click Clear to clear all points on the map, and click Resume to restore
the status before this edit.

10 Event

In the "Events" interface, you can view the real-time alarm information. You can view the latest 1000 messages at
the latest. For historical alarm messages, query the logs. For details on the log query, see "8 Logs."
Select the event, you can select "disable alarm sound" to disable the alarm sound for the event; select "disable
pop-up linked video", disable the pop-up video for the event; select "pause refresh" to pause the refresh of the
event.
Select the event and click "annotate" to add description information to the event.
After the event is processed or annotated, the state of the event cannot be modified.
VMS Video Monitoring Platform User Manual

11 Event configuration

After the linkage notification is configured, an alarm is notified when the corresponding event occurs. Supports
the configuration of multiple event linkage notifications. (using motion detection as an example)

1. Select the channel to configure on the device tree.


2. Select motion detection in alarm events.

3. Open the alarm for the device's mobility policy. (click motion detection switch , off

, open ).
4. Select the notification, open the map flashing, alarm capture, alarm sound (map flashing needs to open in the
system settings pop-up electronic map to take effect).
VMS Video Monitoring Platform User Manual

5. Select the linked video and configure the linked video. (Linked video needs to be opened in the system settings
to activate the alarm).

6. By setting the alarm window window mode.


7. Drag the channel into the corresponding window.

8. Check to open the alarm recording and set the recording


duration.

9. Double-click the cell to modify the stream duration, duration, click , delete the video
channel.
VMS Video Monitoring Platform User Manual

10. Click Save to save the alarm configuration.

12 Video plan

It can realize the client's local scheduled recording, and can record multiple devices at the same
time, at different time, video, general video, alarm video and video recording. The recording plan
switch is shown below.

12.1 Add channel

1. Select to enter the channel management interface.

2. Drag the channel to the right channel list and click to delete the channel.
VMS Video Monitoring Platform User Manual

3. Click Save to save the channel list.

12.2 Video plan

1. Select to enter the setting time period interface.

2. Select the pen type, draw directly on the time bar, or erase the time

period setting time. You can also click the button to enter the setting plan time interface to set
the time period.
VMS Video Monitoring Platform User Manual

3. Click Save to save the recording period.

13 User configuration

13.1 Role management

You can add, modify, and delete roles


VMS Video Monitoring Platform User Manual

1. Click to add a role.


2. Enter a role name, enter a comment, check the menu permissions, and channel rights.
3. Click Save to save the role.
note:
1. When the user under the corresponding role logs in to the client, the menu-unassigned function
is not displayed on the new function page, and the channel to which no channel permission is
assigned is also not displayed in the corresponding device tree.
2. admin has all permissions and cannot be modified or deleted. Adding roles supports modifying
role permissions or deleting roles. (Other roles have no user management)
3. When deleting a role, the existing user under the role will also be deleted. Please confirm it
before proceeding.
VMS Video Monitoring Platform User Manual

13.2 User Management

You can add, modify, and delete users.

Click

to add a user.
1. Enter the user name, select the user's role (different roles can choose different user rights), enter
the password, confirm the password, enter the comment, check the menu permissions, channel
permissions.
2. Click Save to complete the user addition.
note:
1. admin has all rights and cannot be modified or deleted. Add user support to modify user rights or
delete users.
2. User rights You can only add the rights owned by the user's role.

Delete users or roles, edit users or roles.


VMS Video Monitoring Platform User Manual

14 System Configuration

You can set the system parameters of the software. Click in the upper right corner of the main
interface. The System Configuration pop-up window is displayed.
Parameter Description

Start up from power-on Select “Boot-up from power-on”. When the


VMS Video Monitoring Platform User Manual computer is turned on, the software starts
Basic automatically.
configuration Automatic login Select "Automatic login" and restart the
software. The software automatically logs in
the added device. Modifying this parameter
takes effect after restarting the software.
Automatically start scheduled Select “Restore last preview view”. When the
recording software is closed, record the status of the
preview video window at the time. When you
log in again and open the preview interface,
the previous video will be restored.
Restore Last Preview View Select “Restore Last Preview View”. When the
software is closed, the preview video window
status will be recorded. When you log in again
and open the preview interface, the previous
video will be restored.
Alarm Alarm Pop-up Alarm Pop-up Select “Alarm Pop-up” to open the
configuration alarm pop window when the alarm linkage video
triggers.
E-map pop-up Select “Eject pop-up map”. When the alarm
configuration turns on the map flashes and an alarm
event is triggered, the electronic map will open.
Display Event Suspending Window When “Show Event Suspending Window” is selected,
the event suspension window will be displayed.
Double-click the event suspension window to enter
the event interface.
Audio file path Set the sound file when the alarm sound is triggered

Device Automatic Filling Select Auto Fill User Name/Password and


Management enter the user name and password. The
software automatically logs in the added
device based on the set user name and
password.
If the user name and password are the same
as the login user name and password of the
device, the login succeeds. Otherwise, the
login fails.
System and Automatic time setting Select “Automatic adjustment time” and set
Language the corresponding time point. When the time
is on, the software automatically synchronizes
time with the local PC.
Immediately adjust the time click on “immediately adjust the time”, and
the software will synchronize the time with
the local PC.

Language Set the language of the software. Modifying


this parameter takes effect after restarting the
software.
The software is maximizing The way when the software is maximized.
Includes full screen and window
maximization.
Picture Save Path
The path where the capture file is saved.
File path
Manual recording path Click the recording button to record the
VMS Video Monitoring Platform User Manual

You might also like