Ccproxy Server Installation
Ccproxy Server Installation
www.youngzsoft.net
Server Installation
2009.02
http://www.youngzsoft.net/ccproxy/
1 Content
1 2 3 4 5 6 7 Content......................................................................................................................................1 LAN networks configuration ....................................................................................................2 Internet connection configuration .............................................................................................4 Install CCProxy on the Server...................................................................................................6 Add client's IP into CCProxy ....................................................................................................7 Configure IE at client................................................................................................................9 Contact ....................................................................................................................................11
http://www.youngzsoft.net/ccproxy/
How to detect whether ping Requests are transferring through between the clients and server? At the client, in the "start" menu -> "run" -> "cmd", assuming that the server IP is 192.168.0.1, in the command line, to type "ping 192.168.0.1" then press return. If the result is similar to that at below, it means the client is connected to the server successfully. Pinging 192.168.0.1 with 32 bytes of data: Reply from 192.168.0.1: bytes=32 time=2ms TTL=150 Reply from 192.168.0.1: bytes=32 time=2ms TTL=150 Reply from 192.168.0.1: bytes=32 time=7ms TTL=150 Reply from 192.168.0.1: bytes=32 time=7ms TTL=150 Ping statistics for 192.168.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 4ms
http://www.youngzsoft.net/ccproxy/
If the result is like that at below, it means the client cannot connect to the server. Pinging 192.168.0.1 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.0.1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
If the client cannot connect to the server, you need to check the IP address settings and the connections to the Hub, Switch or Router on the clients and server.
http://www.youngzsoft.net/ccproxy/
The simplest way to check the server can access the Internet is to input a web site address into the browser and see if the machine is able to access the web pages.
Users frequently mentioned single and dual NIC. In fact, the CCProxy is not concerned with hardware equipment. Both single and multi-NIC cards are supported and there are no special settings. Special mention is that if the clients have been able to share the Internet, such as through the router, and hope to use the CCProxy to manage and control the clients' Internet access. You might need to do some changes on your hardware. For example:
(Figure 1) In this case, the clients can access the Internet directly with the Routers bypass proxy server. That's to say, CCProxy cannot control the clients. We need to isolate the client from Internet and force clients to access the Internet via the proxy server.
http://www.youngzsoft.net/ccproxy/
Add one NIC card on the server and change the LAN networks as:
(Figure 2)
Method 2: Configure the NAT or route settings in the router and block all LAN IP address accessing the Internet directly except the server IP address. Only some advanced routers have this function. Please do this with the router's administrator.
http://www.youngzsoft.net/ccproxy/
(Figure 3) If you want to know more about server configurations, please read "Server Configuration". If you get problem in launch CCProxy, please read "CCProxy Start Problem".
http://www.youngzsoft.net/ccproxy/
(Figure 4)
http://www.youngzsoft.net/ccproxy/
(Figure 5)
(Figure 6) If you want to know more about account management, please read "Account Manager".
http://www.youngzsoft.net/ccproxy/
6 Configure IE at client
Go to client computer and open IE window. Open "Tools" menu, select "Internet Options" and open the "Internet Options" dialog box. Select "Connections" tab (Figure 7), click "LAN Settings" button and open the "Local Area Network (LAN) Settings" dialog box. Check "Use a proxy server for your LAN", Fill "192.168.0.1" in "Address" and "808" in "Port" (Figure 8). Click "OK" button in "Local Area Network (LAN) Settings" and "Internet Options" dialog boxes. Now you can browser Internet web sites in IE at the client.
(Figure 7)
http://www.youngzsoft.net/ccproxy/
(Figure 8) If you want to know more about client configurations, please read "Client Configuration".
If you get problem in using CCProxy, please read "Documents" and "FAQs" at our web sites.
10
http://www.youngzsoft.net/ccproxy/
7 Contact
[email protected] Please read the FAQ and email to us if you have additional questions or problems. [email protected] Currently our products are only distributed on the Internet. If you are interested in exchanging links with us, or would like to help us with physical distribution, promotion in software compilations, or business cooperation, kindly let us know! We are open to various levels of cooperation. Homepage: http://www.youngzsoft.net/ccproxy/ How to Purchase: http://www.youngzsoft.net/ccproxy/purchase.htm FAQs: http://www.youngzsoft.net/ccproxy/faq.htm Feedback: http://www.youngzsoft.net/ccproxy/contact.htm
11