For your convenience, please read this manual carefully
before use and follow the instructions strictly.
The Acme team is always ready to provide you with
excellent service. No matter what problems you encounter
during use, please contact us at the phone number or email
address provided at the end of the manual.
Notes for use 1. Do not use the printer anyway other than described herein in order to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
4. Please use recommended resin to in case damage of machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
6. Please do not open the plastic cover during usage, otherwise the printing will be interrupted. 7. Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
8. Please wait a moment after the print is finished. And please wear gloves to takeout the print by tools.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
10.Children under 10 years should not use the printer without supervision. 11. This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
12. Users shallcomply with related nation and region’s laws, regulations and ethical codes where the equipment or regional laws, regulations and ethical codes where herein refeffed product and produced prints by it is located. Contents
Introd uction 01
Basic Param eters 02
Parts L st........................................................03
Operationi nterface d escr ptio n
04
Releasefi m insta latio n inst r ucti o n s 05
01 Equipment introduction 1
5 4
1 Air outlet 2 Inlet
3 Temperature Sensor 4 USB interface 5 Switch 6 Touchscreen 1
1 Carbon package installation port/air outlet
2 Exhaust port 3 Power DC interface 02 Basic Parameters
Model S1 Forming method LCD Print size 218x123x210mm(LxWxH) Machine size 355x302.2x584.5mm(LxWxH) Package Size 425x380x715mm(LxWxH) Machine weight 19KG Gross weight 21KG Light source wavelength Wavelength 405nm Z-axis accuracy 0.01mm Operating system Windows 7/10、MAC OS Slicing software Vlare、Voxeldance Tango Control the touch screen 7.0 inch touch screen Power requirements AC110~240V Rated power 120W Connection method USB Disk Printing speed 60mm/h Printing accuracy ±0.05mm Thick print layer 0.025mm~0.1mm File format STL/OBJ Resolution 7680*4320 pixels Horizontal axis pixels 28.5μm LCD screen 10.1 inch monochrome screen Type of light source COB Brightness Light intensity value 4500~5000μw/cm² Printing method U disk Air purification yes Equipment operating Temperature: 10℃~30℃; Humidity: 30%-90% environment Applicable consumables 405nm wavelength light sensitivity resin 03 Package Content
Print Platform*1 Resin Vat*1 3D Printer*1
Tool list
U Disk*1 Screw Drivers *1 Metal blade*1
Plastic blade*1 Resin filter *2Pcs Release film * 1
Power adapter *1 Power cord*1 Disposable gloves*2 pairs
04 Operation interface description 1. Main interface After the motherboard is powered on and started, it will first display the boot LOGO picture, and then enter the system interface. The main interface of the system has three function keys: "Tools", "System", and "Print".
2. Tool After clicking the tool, you will enter the tool interface. The tool interface includes: "Manual", "Exposure Test", "Set Z to Zero", "Emergency Stop", "Plate Cleaning" and "Return". After clicking "Manual", you will enter the interface for manual control of platform movement.
"Moving distance selection area" allows you to modify the distance that the manual control platform moves up and down, and can be set to "0.1mm", "1mm" and "10mm".
"UP" moves upward. After clicking, the platform will move
upward by the specified distance. The distance moved is the distance selected above.
"DOWN" moves downward. After clicking, the platform will
move downward for the specified distance. The distance moved is the distance selected above.
"Home" returns to the zero point. After clicking, the platform
will move downward to find the position of the Z-photoelectric switch. After the "TOP" reaches the top point, the platform will move upward to the highest position of the set stroke. This operation can only be performed after the platform finds the Z-photoelectric switch position. Otherwise, the platform will move beyond the stroke and damage the module.
"STOP" stops, emergency stops the movement of the platform.
After clicking, the platform will terminate all movement operations.
"Back" returns to the previous menu.
Test the exposure screen display effect.
Click Time to modify the exposure time, up to 200s.
Click the up and down arrows to modify the exposure time in units of 1s. Click "Return" to return to the previous menu. Click "Next" to enter the exposure interface.
On the exposure interface, click "Return" to return to the previous menu.
After the manual operation platform finds the photoelectric switch and moves it, click "Set Z to Zero" to print the current position as the zero position. It is recommended to use the "Z-" position as the zero position. After clicking, the printer platform will stop moving immediately, which is the emergency stop button of the equipment.
The printing screen is fully exposed to solidify the residual resin on the material tray, making it easy to clean the material tray. Click "Next" to enter the exposure interface.
Return to the previous menu.
3. System After clicking System, enter the system menu. The system menu contents include: system information, network, after-sales service language, touch correction and return. The system information interface has three pieces of information from top to bottom: motherboard model, motherboard ID, and motherboard firmware version. Mainboard firmware version number, taking "V0.0.6.0.5_7.0_7680_4320_ L3" as an example, "V0.0.6.0.5 is the version number of the firmware system, "7680_4320" is the resolution of the printing screen of the mainboard system. Small speaker icon , click to set whether the motherboard buzzer is muted. The return icon returns to the previous menu. The motherboard has a lock screen function. Click the Close of the lock screen to turn the lock screen function on and off . For motherboards with memory chips, click Format Internal Storage to format the memory chip.
Network system interface, only applicable to motherboards that support WiFi
function. This interface can display WiFi information. IP is the LAN IP number assigned to the motherboard by the router after the motherboard is connected to the router. WiFi and WiFi password are the WiFi name and password of the router connected to the motherboard. This WiFi and WiFi password can be modified through the gcode parameter setting file. WiFi status, showing whether the motherboard is connected to the router.
The button in the upper left corner is the WiFi function on andoff button. For motherboards that support WiFi function, it is turned on by default.
After-sales service information includes: official website, service, landline
phone, and public account. These information can be modified through the gcode parameter setting file. Click the language button to switch the system language of the motherboard.
Click to enter the touch calibration interface and calibrate the touch screen. This function is only available on resistive touch screens, capacitive touch screens do not have this button. 4. Print
After clicking the print button, you will enter the U disk interface and the files in the U disk will be displayed.
For motherboards with memory chips, click the U disk icon in the upper right corner to switch to the motherboard memory interface and view the files in the motherboard memory.
The up and down arrow buttons can turn pages up and down.
Return button to return to the previous menu.
After clicking on the slice file in the USB flash drive or memory, you will enter the slice printing confirmation interface.
The trash can button in the upper right corner is used to
delete the selected slice files.
Start printing button.
Return to the previous menu.
05 Releasefilminstallationinstructions Installation steps 1.First, First use the film clips (green and blue pieces) to clamp the release film. 2.Then directly fix it on the material trough with M3x12 hexagonal countersunk head screws.
Parameters Dimensions after installation: 240x143x0.15mm Thickness：0.15mm Light Transmittance：95% WARRANTY Before returning the product and filling out the warranty form, please contact the after-sales personnel for after-sales procedures. And include this warranty card with the returned machine.
