IMPORTANT SAFETY INSTRUCTIONS

Revolution 2x2
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings. The Black Lion Audio Revolution 2x2 complies with all applicable /
4. Follow all instructions. RoHS / WEEE European Union directives.
5. Do not use this apparatus near water.
6. Clean only with dry cloth. Do not attempt to service this unit yourself, as it will void your warran- The truly high-end, portable recording interface.
7. Install in accordance with the manufacturer’s instructions. ty. Please check your unit carefully upon receipt and return to place
8. Do not install near any heat sources such as radiators, heat regis- of purchase immediately if there are any problems with the product.
ters, stoves, or other apparatus that produce heat. After that, the standard Black Lion Audio 3 YEAR warranty will apply
9. Do not defeat the safety purpose of the polarized or grounding-type to defects in materials and workmanship.
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the pro- U.S.A.
vided plug does not fit into your outlet, consult an electrician for Should your Black Lion Audio product require service,
replacement of the obsolete outlet. please contact the Black Lion Audio Service Department:
10. Protect the power cord from being walked on or pinched particular- https://www.blacklionaudio.com/contact. You must obtain an RA #
ly at plugs, convenience receptacles, and the point where they exit (Return Authorization number) from us before shipping a unit back to
from the apparatus. If the power cord becomes frayed, stop using us. This RA # must be clearly written on the outside of the box.
immediately.
11. Use only attachments/accessories specified by the manufacturer Please safely pack the units…It is best to use the original packing
12. Use only with a cart, stand, tripod, bracket or table specified by the materials. Black Lion Audio cannot be responsible for any damag-
manufacturer, or sold with the apparatus. When a cart is used, use es incurred in shipping to us due to poor packaging. PLEASE PACK
caution when moving the cart/apparatus combination to avoid in- CAREFULLY and FULLY INSURE THE SHIPMENT.
jury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time. INTERNATIONAL
14. Refer all servicing to qualified service personnel. Servicing is re-
For service or warranty assistance, please contact the Black Lion Au-
quired when the apparatus has been damaged in any way, such as
dio distributor in your country through the dealer from whom you pur-
power supply cord or plug is damaged, liquid has been spilled or
chased this product.
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.
15. This apparatus shall not be exposed to dripping or splashing, and LIMITED 3 YEAR WARRANTY
no object filled with liquids, such as vases, shall be placed on the Black Lion Audio’s Revolution 2x2 is warranted by Black Lion Audio to
apparatus. be free from defects in materials and workmanship for the period of
16. Note that this apparatus is not completely disconnected from the THREE (3) YEARS to the original purchaser. In the event of such defects,
AC mains service when the power switch is in the OFF position. the product will be repaired without charge or, at our option, replaced
17. The mains plug or power inlet on the product is used as the discon- with a new one if delivered to Black Lion Audio prepaid, together with a
nect device, so the disconnected device shall remain readily opera- copy of the sales slip or other proof of purchase date. The warranty ex-
ble when reconnected. cludes problems due to normal wear, abuse, shipping damage or failure
18. Any changes or modifications not expressly approved in this manu- to use the product in accordance with the specifications.
al could void your authority to operate this apparatus.
All parts and labor are covered under this Limited Warranty. However,
if it is determined by Black Lion Audio that the device was damaged or
made defective through abuse, we reserve the right to charge the cus- SOFTWARE REGISTRATION CODE
The lightning flash with an arrow- tomer for the cost of the repair.
head symbol within an equilateral
triangle is intended to alert the Black Lion Audio shall not be liable for damages based upon inconve-
user to the presence of uninsu- nience, loss of use of the product, loss of time, interrupted operation or
lated “dangerous voltage” within commercial loss or any other damages, whether incidental, consequen-
the product’s enclosure that may tial or otherwise. This warranty gives you specific legal rights, and you
be of sufficient magnitude to may have other rights, which will vary from state to state.
constitute a risk of electric shock
to persons. This warranty is not transferable.

Quick Start Guide

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
LET’S GET STARTED! GETTING TO KNOW THE REVOLUTION 2X2.

Product Registration and software download instructions Front Panel

1. Go to www.blacklionaudio.com 4. You will be prompted to provide the “Software Registration Code”.

2. Click on the “PERSON” Icon on the upper right hand corner. This code can be found on the front cover of this manual!
3. Click Sign up. Under New Customer, enter your email address, 5. After completing the product registration, an email will be sent to 4 3
create a serial number and click registration. Follow the product you containing each software serial number and download instruc- 5 7 8 9 10 11
registration process after you create your Black Lion user account. tions.

Plug-in to the computer instructions (mac & PC)

Windows users: Install the Revolution 2X2 Windows ASIO driver. This MacOS users: The Revolution 2X2 is a class-compliant Core Audio
installer was designed to be easy to use. Simply device, so no installation is necessary. Simply
follow the onscreen instructions. You will be alerted connect your Revolution 2X2 to your computer to
that the installer has successfully finished and it will begin using it.
prompt you to reboot your computer. Click “Finish” to
automatically restart your computer
2 6 13 12
1

Prepping for Playback

1. Inputs: XLR-Combo inputs for connecting microphones, 8. Monitor: This attenuates the analog output level.
instruments, and line-level equipment. 9. USB Status: This LED indicates the status of USB connectivity.
1. Turn the Mixer knob on the front panel of your Revolution 2X2 to the 2. Connect a pair of headphones to the Revolution 2X2 headphone
2. Instrument Input Switch: This selects between instrument level 10. Direct Mixer: This knob is a direct mixer for monitoring inputs in
12 o’clock position. This will allow you to hear both your inputs and output and turn the Phones volume control to the 12 o‘clock position.
and line level for the 1/4” input on the XLR-Combo. real-time. Turn left for inputs, and turn right for playback.
the playback from the computer.
3. Preamp Gain: This knob attenuates the level of gain on the 11. Headphone Volume: This attenuates the headphone volume level.
preamplifier. 12. Headphone Output: Connect your headphones here.
4. Input Meter: This LED indicates the levels coming into the preamp. 13. Mono Button: Engaging this switch performs mono summing to
5. 48V Button: This button turns on 48V phantom power on both direct input monitoring. For monitoring stereo inputs, make sure
preamplifiers. this button is disengaged. This button only effects input monitor,
6. Input Select: Engaging this button switches to S/PDIF digital inputs. and not playback monitoring.
7. Main Output Meter: This meters the output level.

Rear Panel
Connect headphones here.

Recording

1. Connect a microphone then speak into it while watching the meter 2. Engage MONO button for input monitor summing.
on Channel 1 in Studio One and slowly turning the Revolution 2X2 3. Click the “Record“ button in Studio One Artist to being recording
Input 1 Trim knob clockwise. your first track!

1 2 3 4

1. Main Output: Connect your monitors here. 4. USB-C Connector: Connect your computer here, and you’re good
2. S/PDIF Input: Connect S/PDIF digital outputs from devices here. to go!
3. S/PDIF Output: Use this to output the Revolution 2x2 main outputs
to another device.

Connect microphone here.