ORDER NO.

CRT3686

BLUETOOTH ADAPTER

CD-BTB100
CD-BTB100 /XN/E
/XN/EW5

This service manual should be used together with the following manual(s) listed below.
For the parts numbers, adjustments, etc. which are not shown in this manual,
refer to the following manual(s).
Model No. Order No. Mech. Module Remarks

CD-BT10/XN/EW5 CRT3625

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
K-ZZD. APR. 2006 Printed in Japan
 1 2 3 4

SAFETY INFORMATION
WARNING
A
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65

EXPLODED VIEWS AND PARTS LIST

PACKING(Page 6)
PACKING SECTION PARTS LIST *:Non spare part
B Mark No. Description CD-BT10/XN/EW5 CD-BTB100/XN/EW5 CD-BTB100/XN/E
8 Carton CHG5864 CHG5865 CHG5758
9 Contain Box CHL5864 CHL5865 CHL5758
* 16 Caution Card CRP1338 CRP1341 CRP1341
* 17 Warranty Card CRY1157 CRY1157 CRY1246
Owner’s Manual Not used CRD4103 CRD4105

Owner’s Manual Not used CRD4104 Not used

Owner's Manual
C Part No. Language
CRD4103 English, Spanish, German, French
CRD4104 Italian, Dutch, Russian
CRD4105 English, French, Portuguese(B)

EXTERIOR(Page 8)
EXTERIOR SECTION PARTS LIST
Mark No. Description CD-BT10/XN/EW5 CD-BTB100/XN/EW5 CD-BTB100/XN/E
7 Main Unit Assy CWN1932 CWN1933 CWN1933
D 17 Bluetooth Unit CWN1934 CWN1935 CWN1935
25 Plate Unit CXC6643 CXC6642 CXC6642

2 CD-BTB100/XN/EW5
1 2 3 4
 5 6 7 8

ADJUSTMENT
BLUETOOTH TEST MODE
A

CD-BTB100/XN/EW5 3
5 6 7 8
 1 2 3 4

- Check in Normal Operation

A 0. Bluetooth phone specifications

A mobile phone supporting Bluetooth Ver.1.1 with HFP and OPP is required.
Models with which connection has been verified are recommended.

When AV profile device is used,

When AV profile device is used, models with which connection has been verified are recommended.
[naviPlay Adapter (TEN_Technorogy), BLUEWAVE (macally), IPBCK (SCOSCHE),
BT-01UDE (PLANEX), wireless headphones (Logicool), etc]

1. Caution
Explain to the user that the user registration data on Flash ROM memory will be deleted to clear the history of
connection test. Then turn the ACC ON and press the reset button to delete the Flash ROM memory.
B
2. Outline of functions
Check the connection in normal operation when checking the operation using phones
supporting Bluetooth.

3. Configuration diagram

IP-BUS Mobile Phone

D
Bluetooth

Head unit (DEH-P7700MP, etc.)

CD-BTB100

Bluetooth AUDIO
E

4 CD-BTB100/XN/EW5
1 2 3 4
 5 6 7 8

4. Procedure for checking connection with Bluetooth-supporting phones

Operation Method Screen A

Execute Bluetooth device search by operating

the mobile phone and input the pass key.

↓
When connection with Bluetooth phone is
complete,
the screen display shown on the right
appears. B
When connection is successful, execute
calling test and check the voice
↓
Select FUNC1 from the FUNCTION menu
and register the phone data by pressing
registration key to show the screen on the
right.

When phone data is registered, its incoming

and outgoing call register, etc. can be
displayed.
C

5. Procedure for checking connection with Bluetooth-supporting AUDIO devices

Operation Method Screen

Operate the Bluetooth AUDIO device and

establish Bluetooth connection.

↓
When connection is completed, screen D
display on the right appears.

6. Waiting for connection with Bluetooth-supporting devices

Operation Method Screen

By selecting FUNC1 on the FUNCTION

menu and pressing the registration key, E
the product waits for connection
establishment (right figure).

CD-BTB100/XN/EW5 5
5 6 7 8
 1 2 3 4

- Test Mode (using mobile phones)

1. Outline
A
A test mode for simply checking the following 3 items.
• Bluetooth antenna sensitivity check
• FLASH memory operation check
• Bluetooth connection (authenticated connection) check

2. Configuration diagram for testing

IP-BUS Bluetooth

3. Procedure for starting up the test mode

Start up the power supply by simultaneously pressing 4+6 keys and set the H/U mode
C into test mode.

C N : W A I T
Connection waiting status

Connecting from the mobile phone (PIN input)

C N : O K C N : E R R O R
Connection completion status Connection error

Key 1 pressing

A N : - - -
Detecting antenna strength
D

A N : - 1 5
Display of antenna strength (when it is -15 dB (the range is -18 dB to -80 dB))

Key 1 pressing

Note: This function is not

S N D : O F F used in service.
Voice line is not connected.
Voice link cutoff status

Key 1 pressing

S N D : O N S N D : N G Voice line is connected.

E Voice link ON: Outputting sine wave Voice link NG Check that sine wave is input
from the microphone and is
Key 1 pressing output from the speaker.

S N D : O F F Voice line is cut off.

Voice link cutoff status Check that the sine wave stops.

Key 1 pressing

F L A S H : - - FLASH check is executed automatically by the following order.

Testing Flash memory Deleting→writing→reading→deleting all→reading
When FLASH memory test is executed,
user registration data on FLASH memory is deleted.
Test is completed if operation is normal to this point.

F L A S H : O K F L A S H : N G
F Flash memory test OK Flash memory test NG

6 CD-BTB100/XN/EW5
1 2 3 4
 5 6 7 8

- Test mode (using spectrum analyzer)

1. Cautions
If there is a spectrum analyzer supporting 2.4 GHz at the service site, confirmation of
A
transmission carrier becomes possible.
Since CD-BTB100 cannot operate singly, the main set with IP-BUS control is required.
Carrier existence is checked by removing the product case and applying the probe onto
the "ANT" land of the base unit.
Since it is done by probe connection, the level cannot be confirmed accurately.
2. Function outline
Simple operation check on Bluetooth is executed in test mode using a spectrum analyzer
supporting 2.4 GHz.
Output check on Bluetooth unit
Spectrum analyzer supporting 2.4 GHz
3. Configuration diagram
B

4. Procedure for test mode startup

"Transition of display" "Operation"
1. Test mode startup C
C N : W A I T Start up the power supply by
Initial screen for production engineering test mode simultaneously pressing 4+6 keys and
BAND key set the Head Unit mode to test mode.
2. Mode switching
L O O P . B _ S Use the BAND/ key to switch from
Initial screen for authentication/design test mode production engineering test mode
to authentication/design test mode.
1 Loop Back test: 3. Display switches as
L O O P . B _ S shown on the left figure
Left key Right key Switch display using the right key
and set the 5 Local TX no modula-
2 Page Scan test:
tion test mode.
P . S C A N _ S Use key 1 to set the Local TX no
modulation detail setup mode. D

3 Inquiry Scan test:

I . S C A N _ S

4 Local TX test:
L . T X _ S

5 Local TX no modulation test: Local TX no modulation test:

Selecting Executing
L . T X N M _ S L . T X N M _ E
Key 2 E
Key 1

To Loop Back test

Local TX no modulation detail setting 4. To Local TX no modulation

TX Frequency
detail mode
T _ 2 4 0 2
Use key 3 to switch the frequency.
Key 3 Key 4

T _ 2 4 4 1

T _ 2 4 8 0

F
T _ 2 4 9 5

CD-BTB100/XN/EW5 7
5 6 7 8