Finding a Marine Service and Navigating to It Marking a Waypoint

To find and navigate to a marine service from your current location: To mark your current location as a waypoint:
1. From the Home screen, select Where To? > Offshore Services. 1. From any screen, press MARK.
2. Select the marine service category to which you want to navigate. The chartplotter shows the
list of the 50 nearest locations and the distance and bearing to each.
2. Select Edit to designate a specific name, symbol, water depth, water temperature, or add
a comment.
GPSMAP 4000 Series
®

3. Select the marine service item to which you want to navigate. A screen containing information To create a new waypoint:
about the selected marine service appears. 1. From the Home screen, select Charts > Navigation Chart.
4. Select Navigate To > Go To to navigate directly to the location. (Or, select Route To to create
a specific route to the location.)
2. By pressing the Rocker, use the map pointer ( ) to select the location you want to save quick reference guide
as a waypoint.
5. Follow the colored line on the screen to the destination. 3. Select Create Waypoint.

List of Marine Service Items Go to Destination Navigation Chart

Navigating to a Destination on the Chart Editing or Deleting a Waypoint

To navigate to a destination on the chart: To edit a waypoint:
1. From the Home screen, select Charts > Navigation Chart. 1. From the Home screen, select Information > User Data > Waypoints.
2. By pressing the Rocker, use the map pointer ( ) to select the point on the chart where you 2. Select the waypoint you want to edit.
want to go. 3. Select Review > Edit.
3. Select Navigate To. 4. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water Temp,
4. Select Go To to navigate directly to the location, or select Route To to create a specific route or Comment).
to the location.
To delete a waypoint:
5. Follow the colored line on the Navigation chart to the destination. 1. From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint you want to delete.
3. Select Review > Delete.

Navigation Chart Go to Destination

 Turning the Chartplotter On and Off Using the Man Overboard Feature Using the GPSMAP 4000 Series Keypad
To turn on the chartplotter: To mark and navigate to a Man Overboard (MOB) location: Automatic Backlight Sensor—detects ambient light and allows the
1. Press and release the Power key. 1. From any screen, press MARK. backlight to adjust automatically.
2. When the warning screen appears, press SELECT. 2. Select Man Overboard. Power/Backlight—press and hold to turn the chartplotter on or off.
3. Follow the colored line on the screen to the spot Press and release to adjust the backlight.
To turn off the chartplotter:
1. Press and hold the Power key. where the MOB feature was activated. Range (+/-)—press up (+) and down (-) to increase and decrease
the map zoom scale.
2. If one chartplotter is connected, it shuts down. If multiple chartplotters are connected, a To delete an MOB location:
prompt asks if you want to turn off the entire system. Select Yes to turn off the entire network, 1. From the Home screen, select Information > Rocker—press up, down, left, and right to move the map pointer
and enter data.
or select No to put the chartplotter in sleep mode. User Data > Waypoints.
2. Select the MOB location you want to delete. SELECT—press to confirm messages and select items.
MOB locations are marked with the symbol. MARK—press to mark your current location as a Waypoint.
Man Overboard
3. Select Review > Delete. MENU—press to view additional options on most screens.
HOME—press at any time to return to the Home screen.

Numeric Keypad (4010/4210/4012/4212 only)—enter numbers and

Adjusting the Backlight and Color Mode Using Combination Screens letters into fields instead of using the Rocker.

Soft Keys—press the Soft Key next to the option you want to view
To adjust the backlight level: To access and change screen combinations: to select it.
1. While the chartplotter is on, press and release the Power key. 1. Complete one of the following actions to access the Edit Combination screen:
SD Card Slot—insert a BlueChart g2 Vision SD card to access
2. Select Backlight. • From the Combinations screen, press MENU and then select Change Combination. additional features on your GPSMAP 4000 series chartplotter. Insert
3. Select an option to adjust the backlight: • From the Home screen, select Combinations > Unused Combo (if one is available). a blank SD card to transfer user data to other GPSMAP 4000/5000
series chartplotters or a PC.
• To allow the chartplotter to automatically adjust the backlight based on ambient light, select 2. Select an option to customize the Combinations screen. If you have a BlueChart®
Auto. g2 Vision® SD card or are connected to network devices such as sonar and radar, more
• To manually adjust the backlight, select Up or Down, or use the Rocker. combination screen options will be available. Tips and Shortcuts
• Select Functions to select the number of combination screens. • Press HOME from any screen to return to the Home screen.
• Select Layout to change to vertical or horizontal layout. • Press MENU from any of the main screens to access advanced settings.
• Select XM Bar to toggle the XM® bar on or off. • Press and release the Power key to adjust the backlight and color mode.
• Select Data Bar to toggle the data bar on or off.
Go to www.garmin.com for additional documentation and information.
• Select a numbered option, such as 1. Nav Chart or 2. Sonar in the example below, to
select the combination screen to view.
See the Important Safety and Product Information guide in the product box for product
Combination
screen 1
warnings and other important information.

Garmin®, the Gamin logo, GPSMAP®, BlueChart®, and g2 Vision® are trademarks of Garmin Ltd. or its subsidiaries,
To adjust the color mode: Combination registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.
screen 2 XM® is a registered trademark of XM Satellite Radio Inc.
1. Press and release the Power key.
2. Select Color Mode. Data bar
3. Select Day Colors, Night Colors, or Auto. © 2010 Garmin Ltd. or its subsidiaries
June 2010 Part Number 190-00779-01 Rev. E Printed in Taiwan