DRIVER INFORMATION & MULTIMEDIA

WCS
A

B
SECTION
WARNING CHIME SYSTEM C

E
CONTENTS
PRECAUTION ............................................... 3 COMMON ITEM .........................................................18 F
COMMON ITEM : CONSULT Function (BCM -
PRECAUTIONS ................................................... 3 COMMON ITEM) .....................................................18
Precaution for Supplemental Restraint System G
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- BUZZER .....................................................................18
SIONER" ................................................................... 3 BUZZER : CONSULT Function (BCM - BUZZER)....18

SYSTEM DESCRIPTION .............................. 4 DIAGNOSIS SYSTEM (BCM) (WITHOUT IN- H

TELLIGENT KEY SYSTEM) ............................. 20
COMPONENT PARTS ........................................ 4
Component Parts Location ........................................ 4 COMMON ITEM .........................................................20
COMMON ITEM : CONSULT Function (BCM - I
Combination Meter .................................................... 5
COMMON ITEM) .....................................................20
SYSTEM .............................................................. 6
BUZZER .....................................................................20 J
WARNING CHIME SYSTEM ....................................... 6 BUZZER : CONSULT Function (BCM - BUZZER)....20
WARNING CHIME SYSTEM : System Description
...... 6 ECU DIAGNOSIS INFORMATION .............. 22
K
WARNING CHIME SYSTEM : Fail-safe .................... 7
COMBINATION METER ................................... 22
LIGHT REMINDER WARNING CHIME ....................... 7 Reference Value ......................................................22
LIGHT REMINDER WARNING CHIME : Light Re- Fail-safe ...................................................................27 L
minder Warning ......................................................... 7 DTC Index ...............................................................29

PARKING BRAKE RELEASE WARNING CHIME ...... 8 BCM (BODY CONTROL MODULE) ................. 30
PARKING BRAKE RELEASE WARNING CHIME List of ECU Reference .............................................30 M
: Parking Brake Release Warning Chime .................. 8
WIRING DIAGRAM ...................................... 31
SEAT BELT REMINDER WARNING CHIME .............. 9
SEAT BELT REMINDER WARNING CHIME : WARNING CHIME SYSTEM ............................. 31 WCS
Seat belt Warning ...................................................... 9 Wiring Diagram ........................................................31

KEY WARNING CHIME ............................................. 10 BASIC INSPECTION ................................... 40 O

KEY WARNING CHIME : Key Warning Chime ....... 10
DIAGNOSIS AND REPAIR WORK FLOW ....... 40
DIAGNOSIS SYSTEM (COMBINATION Work Flow ................................................................40
METER) ..............................................................12 P
Description .............................................................. 12 DTC/CIRCUIT DIAGNOSIS ......................... 42
CONSULT Function (METER/M&A) ....................... 14
POWER SUPPLY AND GROUND CIRCUIT .... 42
DIAGNOSIS SYSTEM (BCM) (WITH INTELLI- COMBINATION METER ............................................42
GENT KEY SYSTEM) .........................................18 COMBINATION METER : Diagnosis Procedure ....42

Revision: October 2016 WCS-1 2017 Rogue

BCM (BODY CONTROL SYSTEM) (WITH INTEL- Description .............................................................. 50
LIGENT KEY SYSTEM) ............................................ 42 Component Function Check .................................. 50
BCM (BODY CONTROL SYSTEM) (WITH INTEL- Diagnosis Procedure .............................................. 50
LIGENT KEY SYSTEM) : Diagnosis Procedure ..... 42 Component Inspection ............................................ 51

BCM (BODY CONTROL SYSTEM) (WITHOUT IN- SYMPTOM DIAGNOSIS ............................ 52

TELLIGENT KEY SYSTEM) ..................................... 43
BCM (BODY CONTROL SYSTEM) (WITHOUT WARNING CHIME SYSTEM SYMPTOMS ........ 52
INTELLIGENT KEY SYSTEM) : Diagnosis Proce- Symptom Table ....................................................... 52
dure ........................................................................ 43
THE PARKING BRAKE RELEASE WARNING
METER BUZZER CIRCUIT ................................ 45 CONTINUES SOUNDING, OR DOES NOT
Description .............................................................. 45 SOUND .............................................................. 53
Component Function Check ................................... 45 Description .............................................................. 53
Diagnosis Procedure ............................................. 45 Diagnosis Procedure ............................................... 53
SEAT BELT BUCKLE SWITCH SIGNAL CIR- THE SEAT BELT REMINDER WARNING
CUIT ................................................................... 46 CONTINUES SOUNDING, OR DOES NOT
Description .............................................................. 46 SOUND .............................................................. 54
Component Function Check ................................. 46 Description .............................................................. 54
Diagnosis Procedure ............................................. 46 Diagnosis Procedure ............................................... 54
Component Inspection ............................................ 47
THE LIGHT REMINDER WARNING DOES
PARKING BRAKE SWITCH SIGNAL CIR- NOT SOUND ...................................................... 55
CUIT ................................................................... 48 Description .............................................................. 55
Component Function Check ................................... 48 Diagnosis Procedure ............................................... 55
Diagnosis Procedure .............................................. 48
Component Inspection ............................................ 49 THE KEY WARNING DOES NOT SOUND
(WITHOUT INTELLIGENT KEY) ....................... 56
KEY SWITCH SIGNAL CIRCUIT (WITHOUT Description .............................................................. 56
INTELLIGENT KEY) .......................................... 50 Diagnosis Procedure ............................................... 56

Revision: October 2016 WCS-2 2017 Rogue

 PRECAUTIONS
< PRECAUTION >
PRECAUTION A
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT B
PRE-TENSIONER" INFOID:0000000014902900

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along C
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Manual.
WARNING: D
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, it is recommended that all mainte-
nance and repair be performed by an authorized NISSAN/INFINITI dealer. E
• Improper repair, including incorrect removal and installation of the SRS, can lead to personal injury
caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module,
see the SR section.
F
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
G
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the H
Ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the I
battery or batteries, and wait at least three minutes before performing any service.

WCS

Revision: October 2016 WCS-3 2017 Rogue

 COMPONENT PARTS
< SYSTEM DESCRIPTION >
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location INFOID:0000000014555594

ALNIA1645ZZ

No. Component Function

Transmits the key switch signal to the BCM.
1. Key switch Refer to SEC-129, "Component Parts Location" (without Intelligent Key system) for detailed in-
stallation location.
• Receives a buzzer output signal from the BCM with CAN communication line and sounds the
buzzer.
• Controls the following with the vehicle speed signal received from ABS actuator and electric
2. Combination meter unit (control unit) via CAN communication and the signals from switches:
- Seat belt reminder warning chime
- Parking brake release warning chime
- Key warning chime
ABS actuator and electric unit Transmits the vehicle speed signal to the combination meter via CAN communication.
3.
(control unit) Refer to BRC-11, "Component Parts Location" for detailed installation location.
4. Parking brake switch Transmits the parking brake switch signal to the combination meter.
Based on the signals received from various units and switches, transmits the buzzer output signal
to the combination meter via CAN communication.
5. BCM Refer to BCS-7, "BODY CONTROL SYSTEM : Component Parts Location" (with Intelligent Key
system) or BCS-77, "BODY CONTROL SYSTEM : Component Parts Location" (without Intelli-
gent Key system) for detailed installation location.
6. Seat belt buckle switch LH Transmits a seat belt buckle switch signal LH to the combination meter.

Revision: October 2016 WCS-4 2017 Rogue

 COMPONENT PARTS
< SYSTEM DESCRIPTION >
Combination Meter INFOID:0000000014555595

A
The combination meter has a built-in buzzer (1) and sounds the fol-
lowing warnings, according to signals from each switch and unit:
B
• Light reminder warning
• Parking brake release warning chime
• Seat belt warning
• Key warning chime C

D
JSNIA5954ZZ

WCS

Revision: October 2016 WCS-5 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >
SYSTEM
WARNING CHIME SYSTEM
WARNING CHIME SYSTEM : System Description INFOID:0000000014555596

SYSTEM DIAGRAM (WITH INTELLIGENT KEY SYSTEM)

AWNIA2651GB

SYSTEM DIAGRAM (WITHOUT INTELLIGENT KEY SYSTEM)

AWNIA3129GB

COMBINATION METER INPUT/OUTPUT SIGNAL (CAN COMMUNICATION SIGNAL)

Input signal

Signal name Transmit unit

Vehicle speed signal ABS actuator and electric unit (control unit)
Buzzer output signal BCM

Output signal

Signal name Reception unit

Vehicle speed signal BCM

BCM INPUT/OUTPUT SIGNAL (CAN COMMUNICATION SIGNAL)

Input signal

Revision: October 2016 WCS-6 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >

Signal name Transmit unit A

Vehicle speed signal Combination meter

Output signal B

Signal name Reception unit

Buzzer output signal Combination meter C

DESCRIPTION
Combination Meter D
The combination meter sounds the alarm buzzer installed in the combination meter when receiving the buzzer
output signal transmitted from each unit.
E
BCM
BCM receives signals from various units and transmits a buzzer output signal to the combination meter via
CAN communication if it judges that the warning buzzer should be activated.
F
WARNING CHIME FUNCTION LIST

Warning functions Refer to

G
WCS-7, "LIGHT REMINDER WARNING CHIME : Light Reminder
Light reminder warning
Warning"
WCS-8, "PARKING BRAKE RELEASE WARNING CHIME : Park-
Parking brake release warning chime H
ing Brake Release Warning Chime"
WCS-9, "SEAT BELT REMINDER WARNING CHIME : Seat belt
Seat belt warning
Warning"
I
Key warning chime (without Intelligent Key system) WCS-10, "KEY WARNING CHIME : Key Warning Chime"

WARNING CHIME SYSTEM : Fail-safe INFOID:0000000014555597

J
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

Function Specifications K
Buzzer The buzzer turns OFF by suspending communication.

LIGHT REMINDER WARNING CHIME

L
LIGHT REMINDER WARNING CHIME : Light Reminder Warning INFOID:0000000014555598

WCS

AWNIA2539GB P
WARNING CHIME OPERATION CONDITIONS
If all of the following conditions are fulfilled:

Revision: October 2016 WCS-7 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >

Operation conditions
Ignition switch OFF
Combination switch (Lighting switch) 1st or 2nd position
Driver side door Open [front door switch LH ON]

WARNING CHIME CANCEL CONDITIONS

Warning is canceled if any of the following conditions are fulfilled:

Operation conditions
Ignition switch ON
Combination switch (Lighting switch) OFF or AUTO position
Driver side door Close [front door switch LH OFF]

SIGNAL PATH
1. BCM requires warning chime output to combination meter when it judges light reminder warning chime is
necessary from signals below.

Signal name Signal source

Ignition switch signal —

Combination switch signal Combination switch (Lighting switch) BCM

Driver door switch signal Front door switch LH BCM

2. Combination meter sounds integrated buzzer, following the warning chime output requirement (below sig-
nal) from BCM.

Signal name Signal source

Buzzer output signal BCM Combination meter

PARKING BRAKE RELEASE WARNING CHIME

PARKING BRAKE RELEASE WARNING CHIME : Parking Brake Release Warning
Chime INFOID:0000000014555599

SYSTEM DIAGRAM

JSNIA2422GB

WARNING OPERATION CONDITIONS

If all of the following conditions are fulfilled:

Operation conditions
Ignition switch ON

Revision: October 2016 WCS-8 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >
Operation conditions
A
Parking brake During the operation (parking brake switch ON).
Vehicle speed Approximately 4.3 MPH (7 km/h) or more.

WARNING CANCEL CONDITIONS B

Warning is canceled if any of the following conditions are fulfilled:

Operation conditions C
Ignition switch OFF
Parking brake Release condition (parking brake switch OFF).
D
Vehicle speed Approximately 1.9 MPH (3 km/h) or less.

SIGNAL PATH
E
Combination meter sounds integrated buzzer when it judges that parking brake release warning chime is nec-
essary from signals below.

Signal name Signal source

F

Ignition switch signal —

Parking brake switch signal Parking brake switch Combination meter

G

Vehicle speed signal ABS actuator and electric unit (control unit) Combination meter
H
SEAT BELT REMINDER WARNING CHIME
SEAT BELT REMINDER WARNING CHIME : Seat belt Warning INFOID:0000000014555600
I

SYSTEM DIAGRAM
J

AWNIA2652GB

WARNING OPERATION CONDITIONS M

If all of the following conditions are fulfilled:

Operation conditions WCS

Ignition switch ON
Driver seat belt Unfastened [seat belt buckle switch LH ON]
O
WARNING CANCEL CONDITIONS
Warning is canceled if any of the following conditions are fulfilled:
P
Operation conditions
Ignition switch OFF
Driver seat belt Fastened (seat belt buckle switch LH OFF)
6 seconds after the start of warning sound.

SIGNAL PATH

Revision: October 2016 WCS-9 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >
1. BCM requires warning chime output to combination meter when it judges seat belt warning chime is nec-
essary from signals below.

Signal name Signal source

Ignition switch signal —

Seat belt buckle switch signal LH Seat belt buckle switch LH Combination meter BCM

2. Combination meter sounds integrated buzzer, following the warning chime output requirement (below sig-
nal) from BCM.

Signal name Signal source

Buzzer output signal BCM Combination meter

KEY WARNING CHIME

KEY WARNING CHIME : Key Warning Chime INFOID:0000000014555601

SYSTEM DIAGRAM

AWNIA3130GB

WARNING CHIME OPERATION CONDITIONS

If all of the following conditions are fulfilled:

Operation conditions
Ignition switch OFF
Key switch ON (key is in key cylinder)
Driver side door Open [front door switch LH ON]

WARNING CHIME CANCEL CONDITIONS

Warning is canceled if any of the following conditions are fulfilled:

Operation conditions
Ignition switch ON
Key switch ON (key is removed from key cylinder)
Driver side door Close [front door switch LH OFF]

SIGNAL PATH
1. BCM detects key inserted into the ignition switch, and sends key warning signal to combination meter with
CAN communication line.

Signal name Signal source

Ignition switch signal —

Revision: October 2016 WCS-10 2017 Rogue

 SYSTEM
< SYSTEM DESCRIPTION >
Signal name Signal source
A
Key switch signal Key switch BCM

Driver door switch signal Front door switch LH BCM B

2. Combination meter sounds integrated buzzer, when it receives a buzzer output signal from BCM.
C
Signal name Signal source

Buzzer output signal BCM Combination meter

D

WCS

Revision: October 2016 WCS-11 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
Description INFOID:0000000014910270

COMBINATION METER SELF-DIAGNOSIS MODE

The following meter functions can be checked during Combination Meter Self-Diagnosis Mode:
• Pointer sweep of speedometer, tachometer and gauges.
• Illumination of all LCD segments and color patterns for meter displays.
• Illumination of all lamps/LEDs that are controlled by the combination meter (regardless of switch status).
STARTING COMBINATION METER SELF-DIAGNOSIS MODE
NOTE:
• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to
MWI-63, "COMBINATION METER : Diagnosis Procedure". Replace combination meter if power supply and
ground circuits are found to be normal and self-diagnosis mode does not start. Refer to MWI-87, "Removal
and Installation".
• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-
diagnosis mode will exit upon turning the ignition switch to OFF.
How to Initiate Self-Diagnosis Mode
1. Turn ignition switch OFF.
2. While pressing the trip reset switch (1), turn ignition switch ON.
3. Keep the trip reset switch for 1 seconds or more.
4. Press the trip reset switch at least 3 times. (Within 7 seconds
after the ignition switch is turned ON.)
5. “Work instruction code” is indicated in the top portion of informa-
tion display and self-diagnosis is started.
6. The mode switches in the order shown below each time the trip
reset switch is pressed.
NOTE:
If the trip reset switch is not operated for 20 seconds or more, the
self-diagnosis mode is automatically cancelled.
AWNIA3394ZZ

Test order Test item Description

1 Work instruction code
2 Part number
3 Software code
This item is displayed, but not used.
4 EEPROM code
5 Hardware code
6 P.C.B code
The pointer of the following items moves from 0 to MAX twice.
• Speedometer
• Tachometer
7 Circuit check • Engine coolant temperature gauge
• Fuel gauge
NOTE:
If any one of the pointers does not sweep, replace combination meter.
8 Color check*1 Performs the color check of the information display.

Revision: October 2016 WCS-12 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
Test order Test item Description
A
Displays the error code of the following items:
• Speedometer
• Tachometer
9 error code*2 • Engine coolant temperature gauge B
• Fuel gauge
• Meter control switch
All warning/indicator lamp illuminate.
NOTE:
C
10 Warning/indicator lamp check
• When either one of them does not turn ON, replace combination meter.
• SRS air bag warning lamp and security indicator lamp are not illuminate.
NOTE: D
When the trip reset switch is pressed during the indication of Test order “10,” test item returns to Test order “2.”
*1: Color Check
E

JSNIA5944ZZ
H
Blue Red Pink
Green Light blue Yellow
I
White White Black
Light blue Black Pink
Black Blue Black J
Dark blue White Blue

K
*2: Error Code

WCS
JSNIA5945ZZ

O
Item Code Description Action to take/Reference
0 Normal —
A vehicle speed signal cannot be received P
1 from ABS actuator and electric unit (control
Speedometer unit). Perform “Self Diagnostic Result” of
“ABS.”
A vehicle speed signal received from the Refer to BRC-56, "DTC Index".
2 ABS actuator and electric unit (control unit)
is abnormal.

Revision: October 2016 WCS-13 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
Item Code Description Action to take/Reference
0 Normal —

Tachometer Perform “Self Diagnostic Result” of

An engine speed signal cannot be received
1 “ECM.”
from ECM.
Refer to EC-98, "DTC Index".
0 Normal —
Fuel gauge 1 Fuel gauge circuit is short. Refer to MWI-66, "Component Function
2 Fuel gauge circuit is open. Check".

0 Normal —
Engine coolant temper- Perform “Self Diagnostic Result” of
ature gauge An engine coolant temperature signal can-
1 “ECM.”
not be received from ECM.
Refer to EC-98, "DTC Index".
0 Normal —
When judging that the illumination control
1 switch signal circuit is shorted for 5 minutes
or more.
Meter control switch Refer to MWI-72, "Diagnosis Proce-
When judging that the trip reset switch sig-
2 dure".
nal circuit is shorted for 5 minutes or more.
When judging that the both switch signal cir-
3
cuit is shored for 5 minutes or more.
— 0 Displays “0” constantly. —

— 0 Displays “0” constantly. —

— 0 Displays “0” constantly. —

How to Reset Error Code

Error codes stored in combination meter can be reset by following the instructions below:
1. Turn ignition switch OFF.
2. While pressing the trip reset switch, turn ignition switch ON.
3. Keep the trip reset switch for 1 seconds or more.
4. Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
5. Turn ignition switch OFF.
6. Perform self-diagnosis and check that the error codes are reset.

CONSULT Function (METER/M&A) INFOID:0000000014910271

APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown.

METER/M&A Diagnosis mode Description

Self Diagnostic Result Displays combination meter self-diagnosis results.
Data Monitor Displays combination meter input/output data in real time.
Warning History Lighting history of the warning lamp and indicator lamp can be checked.
CAN DIAG SUPPORT MNTR The result of transmit/receive diagnosis of CAN communication can be read.

SELF DIAG RESULT

Refer to MWI-32, "DTC Index".
DATA MONITOR
Display Item List

Revision: October 2016 WCS-14 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
X: Applicable

MAIN A
Display item [Unit] Description
SIGNALS
SPEED METER
X Displays the value of vehicle speed signal.
B
SPEED OUTPUT
X Vehicle speed signal value transmitted to other units via CAN communication.
[mph or km/h]
ODO OUTPUT C
Odometer signal value transmitted to other units via CAN communication.
[mph or km/h]
TACHO METER
X Value of the engine speed signal received from ECM via CAN communication.
[rpm] D
FUEL METER
X Fuel level indicated on combination meter.
[L]
W TEMP METER
X Displays the value of engine coolant temperature signal, which is input from ECM.
E
[°F] or [°C]
ABS W/L
Displays [ON/OFF] condition of ABS warning indicator.
[On/Off]
F
VDC/TCS IND
Displays [ON/OFF] condition of VDC OFF indicator lamp.
[On/Off]
SLIP IND G
Displays [ON/OFF] condition of SLIP indicator lamp.
[On/Off]
BRAKE W/L
Displays [ON/OFF] condition of brake warning indicator.
[On/Off]
H
DOOR W/L Displays [ON/OFF] condition of door or back door warning message in the infor-
[On/Off] mation display.
HI-BEAM IND I
Displays [ON/OFF] condition of high beam indicator.
[On/Off]
TURN IND
Displays [ON/OFF] condition of turn indicator.
[On/Off]
J
LIGHT IND
Displays [ON/OFF] condition of light indicator.
[On/Off]
FR FOG IND
[On/Off]
Displays [ON/OFF] condition of front fog lamp indicator. K

OIL W/L Displays [ON/OFF] condition of low oil pressure warning message in the informa-
[On/Off] tion display.
L
MIL
Displays [ON/OFF] condition of malfunction indicator.
[On/Off]
BA W/L Displays [ON/OFF] condition of FEB warning lamp judged from FEB warning lamp
[On/Off] signal received from ADAS control unit via CAN communication. M
SPORT IND
Displays [ON/OFF] condition of SPORT indicator.
[On/Off]
WCS
CHAGE W/L
Displays [ON/OFF] condition of charge warning indicator.
[On/Off]
4WD LOCK IND
Displays [ON/OFF] condition of AWD LOCK indicator lamp. O
[On/Off]
4WD W/L
Displays [ON/OFF] condition of AWD warning message in the information display.
[On/Off]
FUEL W/L P
Displays [ON/OFF] condition of low-fuel warning message.
[On/Off]
WASHER W/L
Displays [ON/OFF] condition of low washer fluid warning message.
[On/Off]
AIR PRES W/L
Displays [ON/OFF] condition of tire pressure warning lamp.
[On/Off]

Revision: October 2016 WCS-15 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
MAIN
Display item [Unit] Description
SIGNALS
KEY G/Y W/L
Displays [ON/OFF] condition of key green warning lamp.
[On/Off]
EPS W/L
Displays [ON/OFF] condition of EPS warning indicator.
[On/Off]
LCD Displays the value of Intelligent Key system message indication.
ECO MODE IND
Displays [ON/OFF] condition of ECO mode indicator lamp.
[On/Off]
SHIFT IND
Displays shift selector position.
[P, R, N, D, L]
FUEL CAP W/L
Displays [ON/OFF] condition of loose fuel cap warning message.
[On/Off]
M RANGE SW
Displays [ON/OFF] condition of manual mode switch.
[On/Off]
NM RANGE SW
Displays [ON/OFF] condition of non-manual mode switch.
[On/Off]
AT SFT UP SW
Displays [ON/OFF] condition of manual mode shift up switch.
[On/Off]
AT SFT DWN SW
Displays [ON/OFF] condition of manual mode shift down switch.
[On/Off]
PKB SW
Displays [ON/OFF] condition of parking brake switch.
[On/Off]
BUCKLE SW
Displays [ON/OFF] condition of seat belt buckle switch LH.
[On/Off]
ECO MODE SW
Displays [ON/OFF] condition of ECO mode switch.
[On/Off]
BRAKE OIL SW
Displays [ON/OFF] condition of brake fluid level switch.
[On/Off]
DISTANCE
Displays distance to empty.
[Mi] or [km]
OUTSIDE TEMP
Displays the ambient air temperature which is input from the ambient sensor.
[°F or °C]
STRG SW INPUT
Displays [SW 1-SW 12, NOT INPUT] condition of steering switches.
[SW 1-SW 12, NOT INPUT]
FCW IND Displays [ON/OFF] condition of FCW system display detected from meter display
[On/Off] signal is received from ADAS control unit via CAN communication.
LDW IND Displays [ON/OFF] condition of LDW system display detected from meter display
[On/Off] signal is received from around view monitor control unit via CAN communication.
Buzzer status (in the combination meter) is detected from the buzzer output signal
BUZZER
X received from each unit via CAN communication and the warning output condition
[On/Off]
of the combination meter.
TPMS FLT TIRE Displays [ON/OFF] condition of flat tire detected from tire pressure data signal is
[On/Off] received from BCM via CAN communication.
TPMS PRESS L Displays [ON/OFF] condition of tire pressure low from tire pressure data signal is
[On/Off] received from BCM via CAN communication
ASCD SPD BLINK Blinking status of ASCD set vehicle speed judged by the ASCD status signal re-
[On/Off] ceived from ECM via CAN communication.
ASCD STATUS Status of ASCD status display judged by the ASCD status signal received from
[Off, ASCD, CRUISE] ECM via CAN communication.
ASCD REQ SPD ASCD set vehicle speed value judged by the ASCD status signal received from
[km/h/Off] ECM via CAN communication.
BSW IND
Displays [ON/OFF] condition of blind spot warning indicator.
[On/Off]

Revision: October 2016 WCS-16 2017 Rogue

 DIAGNOSIS SYSTEM (COMBINATION METER)
< SYSTEM DESCRIPTION >
MAIN
Display item [Unit] Description
SIGNALS A
HI-BEAM ASST IND Displays [ON/OFF] condition of high beam assist indicator lamp from high beam
[mph/Off] assist indicator lamp signal is received from BCM via CAN communication.
CHASSIS CONTROL WARN Displays [ON/OFF] condition of chassis control warning from chassis control mal- B
[On/Off] function signal is received from chassis control module via CAN communication.

WORK SUPPORT
C
Work support item Description
Outside air temperature diagnosis
D
Fuel meter diagnosis (Analog pointer) A possible malfunction can be narrowed down by following the displayed instructions.
Warning/Indicator lamp diagnosis
E
WARNING HISTORY
Special menu
F
Display item Description
W/L ON HISTORY Lighting history of warning lamp and indicator lamp can be checked.
G
W/L ON HISTORY
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine H
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: No warning/indicator lamp history is stored. I
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low. J

WCS

Revision: October 2016 WCS-17 2017 Rogue

 DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) INFOID:0000000014902916

APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.

Direct Diagnostic Mode Description

Ecu Identification The BCM part number is displayed.
Self Diagnostic Result The BCM self diagnostic results are displayed.
Data Monitor The BCM input/output data is displayed in real time.
Active Test The BCM activates outputs to test components.
Work support The settings for BCM functions can be changed.
• The vehicle specification can be read and saved.
Configuration
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION
BCM can perform the following functions.

Direct Diagnostic Mode

CAN Diag Support Mntr

Self Diagnostic Result
Ecu Identification

System Sub System

Configuration
Work support
Data Monitor

Active Test
Door lock DOOR LOCK × × × ×
Rear window defogger REAR DEFOGGER × × ×
Warning chime BUZZER × ×
Interior room lamp timer INT LAMP × × ×
Exterior lamp HEADLAMP × × ×
Wiper and washer WIPER × × ×
Turn signal and hazard warning lamps FLASHER × ×
Intelligent Key system INTELLIGENT KEY × × × ×
Combination switch COMB SW ×
BCM BCM × × × × ×
Immobilizer IMMU × × ×
Interior room lamp battery saver BATTERY SAVER × ×
Back door open TRUNK ×
Vehicle security system THEFT ALM × × ×
RAP system RETAINED PWR ×
Signal buffer system SIGNAL BUFFER ×

BUZZER
BUZZER : CONSULT Function (BCM - BUZZER) INFOID:0000000014902917

DATA MONITOR
Revision: October 2016 WCS-18 2017 Rogue
 DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
< SYSTEM DESCRIPTION >

Monitor Item [Unit] Description A

PUSH -SW [On/Off] Indicates condition of push-button ignition switch.
VEH SPEED 1 [km/h] Indicates vehicle speed signal received from ABS on CAN communication line.
TAIL LAMP SW [On/Off] Indicates condition of combination switch.
B

FR FOG SW [On/Off] Indicates condition of front fog lamp switch.

DOOR SW-DR [On/Off] Indicates condition of front door switch LH. C
CDL LOCK SW [On/Off] Indicates condition of lock signal from door lock and unlock switch.

ACTIVE TEST
D
Test Item Description
SEAT BELT WARN TEST This test is able to check seat belt warning chime operation [On/Off].
E
LIGHT WARN ALM This test is able to check light warning chime operation [On/Off].
REVERSE WARNING This test is able to check reverse warning chime operation [On/Off].
F

WCS

Revision: October 2016 WCS-19 2017 Rogue

 DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) INFOID:0000000014902919

APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.

Direct Diagnostic Mode Description

Ecu Identification The BCM part number is displayed.
Self Diagnostic Result The BCM self diagnostic results are displayed.
Data Monitor The BCM input/output data is displayed in real time.
Active Test The BCM activates outputs to test components.
Work support The settings for BCM functions can be changed.
• The vehicle specification can be read and saved.
Configuration
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION
BCM can perform the following functions.

Direct Diagnostic Mode

CAN Diag Support Mntr

Self Diagnostic Result
Ecu Identification

System Sub System

Configuration
Work support
Data Monitor

Active Test
Door lock DOOR LOCK × × ×
Rear window defogger REAR DEFOGGER × × ×
Warning chime BUZZER × ×
Interior room lamp timer INT LAMP × × ×
Remote keyless entry system MULTI REMOTE ENT × × ×
Exterior lamp HEADLAMP × ×
Wiper and washer WIPER × × ×
Turn signal and hazard warning lamps FLASHER × ×
Combination switch COMB SW ×
BCM BCM × × × × ×
Immobilizer IMMU × × ×
Interior room lamp battery saver BATTERY SAVER × ×
Back door open TRUNK ×
Vehicle security system THEFT ALM × × ×
RAP system RETAINED PWR ×

BUZZER
BUZZER : CONSULT Function (BCM - BUZZER) INFOID:0000000014902920

DATA MONITOR

Revision: October 2016 WCS-20 2017 Rogue

 DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
< SYSTEM DESCRIPTION >

Monitor Item [Unit] Description A

VEH SPEED 1 [km/h] Indicates vehicle speed signal received from ABS on CAN communication line.
TAIL LAMP SW [On/Off] Indicates condition of combination switch.
FR FOG SW [On/Off] Indicates condition of front fog lamp switch.
B

DOOR SW-DR [On/Off] Indicates condition of front door switch LH.

CDL LOCK SW [On/Off] Indicates condition of lock signal from door lock and unlock switch. C
ACTIVE TEST

Test Item Description D

IGN KEY WARN ALM This test is able to check ignition key warning chime operation [On/Off].
SEAT BELT WARN TEST This test is able to check seat belt warning chime operation [On/Off].
E
LIGHT WARN ALM This test is able to check light warning chime operation [On/Off].
REVERSE WARNING This test is able to check reverse warning chime operation [On/Off].
F

WCS

Revision: October 2016 WCS-21 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value INFOID:0000000014910252

VALUES ON THE DIAGNOSIS TOOL

Monitor Item Condition Value/Status

SPEED METER Input value of vehicle speed signal (CAN
Ignition switch ON While driving.
[mph or km/h] communication signal).
SPEED OUTPUT Output value of vehicle speed signal (CAN
Ignition switch ON While driving.
[mph or km/h] communication signal).
ODO OUTPUT Output value of odometer signal (CAN com-
Ignition switch ON —
[mph or km/h] munication signal).
TACHO METER Input value of engine speed signal (CAN
Ignition switch ON Engine running.
[rpm] communication signal).
FUEL METER
Ignition switch ON — Input value of fuel level sensor signal.
[L]
W TEMP METER Input value of engine coolant temperature
Ignition switch ON —
[°F] or [°C] signal (CAN communication signal).
ABS warning lamp ON. On
ABS W/L Ignition switch ON
ABS warning lamp OFF. Off
VDC OFF indicator lamp ON. On
VDC/TCS IND Ignition switch ON
VDC OFF indicator lamp OFF. Off
VDC warning lamp ON. On
SLIP IND Ignition switch ON
VDC warning lamp OFF. Off
Brake warning lamp ON. On*1
BRAKE W/L Ignition switch ON
Brake warning lamp OFF. Off
Door or back door open warning dis-
On
DOOR W/L Ignition switch ON played.
Other than the above Off
High beam indicator lamp ON. On
HI-BEAM IND Ignition switch ON
High beam indicator lamp OFF. Off
Turn signal indicator lamp ON. On
TURN IND Ignition switch ON
Turn signal indicator lamp OFF. Off
Front fog lamp indicator lamp ON. On
FR FOG IND Ignition switch ON
Front fog lamp indicator lamp OFF. Off
Position lamp indicator lamp ON. On
LIGHT IND Ignition switch ON
Position lamp indicator lamp OFF. Off
Engine oil pressure warning displayed. On
OIL W/L Ignition switch ON
Other than the above. Off
Malfunction indicator lamp ON. On
MIL Ignition switch ON
Malfunction indicator lamp OFF. Off
FEB warning lamp ON On
BA W/L Ignition switch ON
FEB warning lamp OFF Off
AWD warning displayed. On
4WD W/L Ignition switch ON
Other than the above. Off

Revision: October 2016 WCS-22 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
Monitor Item Condition Value/Status
A
AWD LOCK indicator lamp ON. On
4WD LOCK IND Ignition switch ON
Other than the above. Off
Low fuel warning displayed. On B
FUEL W/L Ignition switch ON
Low fuel warning lamp OFF. Off
Low washer fluid warning displayed. On
WASHER W/L Ignition switch ON
Other than the above. Off C
Low tire pressure warning lamp ON. On
AIR PRES W/L Ignition switch ON
Low tire pressure warning lamp OFF. Off
D
Intelligent Key system warning indication. On
KEY G/Y W/L Ignition switch ON
Other than the above. Off
Power steering warning lamp ON. On E
EPS W/L Ignition switch ON
Power steering warning lamp OFF. Off
Sport mode indicator ON. On
SPORT IND Ignition switch ON F
Sport mode indicator OFF. Off
ECO mode indicator ON. On
ECO MODE IND Ignition switch ON
ECO mode indicator OFF. Off G
Charge warning lamp ON. On
CHAGE W/L Ignition switch ON
Charge warning lamp OFF. Off
H
SHIFT IND Ignition switch ON Shift position indicator displayed. [P, R, N, D, L]
Fuel filler cap warning displayed. On
FUEL CAP W/L Ignition switch ON
Other than the above. Off I
Shift selector in manual mode position On
M RANGE SW Ignition switch ON
Other than the above Off
Shift selector in manual mode position Off
J
NM RANGE SW Ignition switch ON
Other than the above On
Shift selector operated in the up position On
AT SFT UP SW Ignition switch ON K
Other than the above Off
Shift selector operated in the down posi-
On
AT SFT DWN SW Ignition switch ON tion L
Other than the above Off
Parking brake switch ON. On
PKB SW Ignition switch ON M
Parking brake switch OFF. Off
Driver seat belt not fastened. On
BUCKLE SW Ignition switch ON
Driver seat belt fastened. Off
WCS
ECO mode switch ON. On
ECO MODE SW Ignition switch ON
ECO mode switch OFF. Off
Brake fluid level switch ON. On O
BRAKE OIL SW Ignition switch ON
Brake fluid level switch OFF. Off
DISTANCE
Ignition switch ON — Distance to empty. P
[mi] or [km]
OUTSIDE TEMP Displays the ambient air temperature which
Ignition switch ON —
[°F] or [°C] is input from the ambient sensor.
Buzzer ON. On
BUZZER Ignition switch ON
Buzzer OFF. Off

Revision: October 2016 WCS-23 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
Monitor Item Condition Value/Status
Flat tire On
TPMS FLT TIRE Ignition switch ON
Other than above Off
Tire pressure is low On
TPMS PRESS L Ignition switch ON
Tire pressure is normal Off
Set vehicle speed indicator blinking On
ASCD SPD BLNK Ignition switch ON
Set vehicle speed indicator not blinking Off
ASCD and speed limiter system OFF Off
ASCD STATUS Ignition switch ON ASCD system ON ASCD
ASCD set vehicle speed CRUISE
ASCD REQ SPD
Ignition switch ON While driving Same value as ASCD set vehicle speed
[mph or Off]
LCD Ignition switch ON Engine start information. B&P
Switch is pressed. SW1-SW12
STRG SW INPUT Ignition switch ON
Other than above. NO INPUT
FCW system display ON On
FCW IND Ignition switch ON
FCW system display OFF Off
LDW system display ON On
LDW IND Ignition switch ON
LDW system display OFF Off
Blind spot warning lamp ON. On
BSW IND Ignition switch ON
Blind spot warning lamp OFF. Off

HI-BEAM ASST High beam assist indicator lamp ON On

Ignition switch ON
IND High beam assist indicator lamp OFF Off

CHASSIS CON- Chassis control warning indication On

Ignition switch ON
TROL WARN Other than above Off

TERMINAL LAYOUT

JSNIA6097ZZ

PHYSICAL VALUES

Terminal No.
Description
(Wire color)
Value
Input/ Condition
(Approx.)
+ – Signal name Out-
put
1
Ground Ground — — — 0V
(B)

7 Igni- Security indicator ON. 0V

1 tion
(BG) Ground Security signal Input
switch Security indicator OFF. Battery voltage
(GR)2 OFF

Revision: October 2016 WCS-24 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
Terminal No.
Description
(Wire color) A
Value
Input/ Condition
(Approx.)
+ – Signal name Out-
put B
9
Ground ECO mode switch — — — —
(GR)
C

Igni-
15 Ambient sensor sig- tion
(L)
Ground
nal
Input
switch
— D
ON

JSNIA0014GB E
17
Meter control switch
(BG)1 Ground — — — 0V
ground
(GR)2 F
Igni- Trip/Reset switch is pressed. 0V
tion
18
Ground Trip/reset signal Input switch G
(SB) Other than the above. 5.0 V
OFF or
ON
20 Ambient sensor
(Y)
Ground
ground
— — — 0V H

21 Steering switch
Ground — — — 0V
(L) ground
I
22 Steering switch output
Ground — — — —
(Y) 1
23 Steering switch output
Ground — — — — J
(GR) 2
Igni- Washer fluid level switch ON. 0V
24 Washer fluid level tion
Ground Input
(BR) switch signal switch Washer fluid level switch OFF. Battery voltage K
ON
Igni- Brake fluid level low. 0V
25 Brake fluid level tion L
Ground Input
(V) switch signal switch Brake fluid level normal. Battery voltage
ON
Igni- Parking brake applied. 0V
26 Parking brake switch tion M
Ground Input
(G) signal switch Parking brake released. Battery voltage
ON

Igni- When driver seat belt is fas- WCS

Battery voltage
28 Seat belt buckle tion tened.
Ground Input
(Y) switch signal LH switch When driver seat belt is unfas-
ON 0V
tened. O
29 Sport mode switch
Ground — — — —
(R) signal
Igni- Selector lever manual mode P
0V
30 tion position
Ground Manual mode signal Input
(LG) switch
ON Other than the above Battery voltage

Igni- Selector lever manual mode

Battery voltage
31 Non-manual mode tion position
Ground Input
(SB) signal switch
ON Other than the above 0V

Revision: October 2016 WCS-25 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
Terminal No.
Description
(Wire color)
Value
Input/ Condition
(Approx.)
+ – Signal name Out-
put
Igni- Shift selector UP operation 0V
32 Manual mode shift up tion
Ground Input
(BG) signal switch Other than the above Battery voltage
ON
Igni- Shift selector DOWN operation 0V
33 Manual mode shift tion
Ground Input
(BR) down signal switch Other than the above Battery voltage
ON
Igni- When illumination control
0V
tion switch (+) is pressed.
36 Illumination control
Ground Input switch
(GR) switch signal (+)
OFF or Other than the above. 5.0 V
ON
Igni- When illumination control
0V
tion switch (-) is pressed.
37 Illumination control
Ground Input switch
(V) switch signal (-)
OFF or Other than the above. 5.0 V
ON
NOTE:
The maximum voltage varies de-
pending on the specification (desti-
nation unit).
Igni-
Speedometer operated [When
38 Vehicle speed signal Out- tion
Ground vehicle speed is approx. 25
(G) (8-pulse) put switch
MPH (40 km/h)].
ON

JSNIA0012GB

NOTE:
The maximum voltage varies de-
pending on the specification (desti-
nation unit).
Igni-
Speedometer operated
39 Vehicle speed signal Out- tion
Ground [When vehicle speed is approx.
(W) (2-pulse) put switch
25 MPH (40 km/h)].
ON

JSNIA0015GB

41
Ground CAN high — — — —
(L)
42
Ground CAN low — — — —
(P)

Revision: October 2016 WCS-26 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
Terminal No.
Description
(Wire color) A
Value
Input/ Condition
(Approx.)
+ – Signal name Out-
put B

C
• Lighting switch 1st position
• When meter illumination is
minimum.
D
JSNIA5983GB

Igni-
43 Illumination control Out- tion E
Ground
(R) signal put switch
ON
• Lighting switch 1st position
• When meter illumination is F
step 11.

JPNIA1686GB
G

• Lighting switch 1st position

• When meter illumination is 0V
maximum. H

44 Igni-
1 Fuel level sensor tion
(LA/B) Ground — — 0V
ground switch I
(GB)2 ON
45
(LA/G)1 Ground Battery power supply — — — Battery voltage J
(G)2
Igni-
46 tion K
(LA/V)3 Ground Ignition signal — switch — Battery voltage
(V)4 ON or
START
L
47
Ground M CAN high — — — —
(SB)
48
Ground M CAN low — — — — M
(LG)

51 Igni-
1 Fuel level sensor sig- tion
(LA/L) Ground — Fuel gauge indication position. Battery voltage
nal switch WCS
(G/L)2 ON
52
Ground Ground — — — 0V
(B)
O
1
: Except Korea Production
2: Korea Production
3
: Japan Production P
4
: Except Japan Production

Fail-safe INFOID:0000000014910253

The combination meter activates the fail-safe control if the CAN communication lines between each unit are
malfunctioning.

Revision: October 2016 WCS-27 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >

Function Specifications
Speedometer
Tachometer Reset to zero by suspending communication.
Engine coolant temperature gauge
Meter illumination control When suspending communication, changes to nighttime mode.
Buzzer Turns OFF by suspending communication.
Current fuel consumption
Average fuel consumption
Average vehicle speed The last result calculated during normal condition is indicated.
Range (Distance to empty)
Driving distance
Door open warning
Lift gate open warning
Information display Low tire pressure warning
Parking brake release warning
The display turns OFF by suspending communication.
Fuel filler cap warning
Oil pressure warning
CVT warning
BSW warning
Odo/trip meter An indicated value is maintained at communications blackout.
Shift position indicator The indicator turns OFF by suspending communication.
ABS warning lamp
Brake warning lamp
EPS warning lamp
VDC warning lamp
Turns ON by suspending communication.
AWD warning lamp
Malfunction indicator lamp
Airbag warning lamp
Charge warning lamp
Warning lamp/indicator lamp VDC OFF indicator lamp
SPORT mode indicator lamp
AWD LOCK indicator lamp
High beam indicator lamp
Turn signal indicator lamp Turns OFF by suspending communication.
Position lamp indicator lamp
BSW indicator lamp
ECO mode indicator lamp
Front fog lamp indicator lamp
Low tire pressure warning lamp After blinking for 1 minute, the lamp remains ON.

Revision: October 2016 WCS-28 2017 Rogue

 COMBINATION METER
< ECU DIAGNOSIS INFORMATION >
DTC Index INFOID:0000000014910269

Display contents of CONSULT Diagnostic item is detected when... Refer to

CAN COMM CIRCUIT Combination meter is not transmitting or receiving CAN communication signal for 2 B
MWI-58
[U1000] seconds or more.
CONTROL UNIT (CAN)
Detecting error during the initial diagnosis of CAN controller of combination meter. MWI-59
[U1010] C
VEHICLE SPEED The abnormal vehicle speed signal is input from ABS actuator and electric unit (con-
MWI-60
[B2205] trol unit) for 2 seconds or more.
ENGINE SPEED
ECM continuously transmits abnormal engine speed signals for 2 seconds or more. MWI-61 D
[B2267]
WATER TEMP ECM continuously transmits abnormal engine coolant temperature signals for 60
MWI-62
[B2268] seconds or more. E

WCS

Revision: October 2016 WCS-29 2017 Rogue

 BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS INFORMATION >
BCM (BODY CONTROL MODULE)
List of ECU Reference INFOID:0000000014555611

ECU Reference
BCS-28, "Reference Value"
BCS-47, "Fail Safe (With Intelligent Key System)"
BCM (with Intelligent Key system)
BCS-47, "DTC Inspection Priority Chart"
BCS-48, "DTC Index"
BCS-95, "Reference Value"
BCS-107, "Fail Safe (Without Intelligent Key System)"
BCM (without Intelligent Key system)
BCS-108, "DTC Inspection Priority Chart"
BCS-108, "DTC Index"

Revision: October 2016 WCS-30 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >
WIRING DIAGRAM A
WARNING CHIME SYSTEM
Wiring Diagram INFOID:0000000014555612
B

WCS

AANWA1787GB

Revision: October 2016 WCS-31 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

AANIA5621GB

Revision: October 2016 WCS-32 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

WCS

AANIA5622GB

Revision: October 2016 WCS-33 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

AANIA5623GB

Revision: October 2016 WCS-34 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

WCS

AANIA5624GB

Revision: October 2016 WCS-35 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

AANIA5625GB

Revision: October 2016 WCS-36 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

WCS

AANIA5626GB

Revision: October 2016 WCS-37 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

AANIA5627GB

Revision: October 2016 WCS-38 2017 Rogue

 WARNING CHIME SYSTEM
< WIRING DIAGRAM >

WCS

AANIA5628GB

Revision: October 2016 WCS-39 2017 Rogue

 DIAGNOSIS AND REPAIR WORK FLOW
< BASIC INSPECTION >
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow INFOID:0000000014555613

OVERALL SEQUENCE

JSNIA4485GB

DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurred.

>> GO TO 2.
2.CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer.
• Check if any other malfunctions are present.

>> GO TO 3.
3.CHECK CONSULT SELF-DIAGNOSIS RESULTS
1. Connect CONSULT and perform "self-diagnosis". Refer to WCS-29, "DTC Index".

Revision: October 2016 WCS-40 2017 Rogue

 DIAGNOSIS AND REPAIR WORK FLOW
< BASIC INSPECTION >
2. When DTC is detected, follow the instructions below:
- Record DTC and Freeze Frame Data. A
Are self-diagnosis results normal?
YES >> GO TO 4.
NO >> GO TO 5. B
4.NARROW DOWN MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts.
C

>> GO TO 5.
5.REPAIR OR REPLACE MALFUNCTIONING PARTS D
Repair or replace malfunctioning parts.
NOTE:
If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts. E

>> GO TO 6.
6.FINAL CHECK F

Check that the warning buzzer in the combination meter operates normally.
Does it operate normally? G
YES >> Inspection End.
NO >> GO TO 1.
H

WCS

Revision: October 2016 WCS-41 2017 Rogue

 POWER SUPPLY AND GROUND CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
COMBINATION METER
COMBINATION METER : Diagnosis Procedure INFOID:0000000014910255

Regarding Wiring Diagram information, refer to MWI-34, "Wiring Diagram".

1.CHECK FUSES
Check that the following fuses are not blown.

Unit Power source Fuse No.

Battery 13 (10A)
Combination meter
Ignition switch ON or START 31 (5A)
Is the fuse blown?
YES >> Replace the blown fuse after repairing the affected circuit.
NO >> GO TO 2.
2.CHECK POWER SUPPLY CIRCUIT
1. Disconnect combination meter connector.
2. Check voltage between combination meter harness connector M77 terminals 45, 46 and ground.

Combination meter Ignition switch position

Ground
Connector Terminal OFF ON START
45 Battery voltage Battery voltage Battery voltage
M77 (–)
46 0V Battery voltage Battery voltage
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connector.
3.CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between combination meter harness connector and ground.

Combination meter
Ground Continuity
Connector Terminal
M76 1
(–) Yes
M77 52
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair or replace harness or connector.
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis
Procedure INFOID:0000000014902918

Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram".

Revision: October 2016 WCS-42 2017 Rogue

 POWER SUPPLY AND GROUND CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
1. CHECK FUSE A
Check that the following fuse is not blown.

Terminal No. Signal name Fuse No. B

161 BCM power supply 7 (10A)
Is the fuse blown?
C
YES >> Replace the blown fuse after repairing the affected circuit.
NO >> GO TO 2.
2. CHECK POWER SUPPLY CIRCUIT D
1. Disconnect BCM connector M20.
2. Check voltage between BCM connector M20 and ground.
E
BCM Voltage
Ground
Connector Terminal (Approx.)

M20 161 — Battery voltage F

Is the inspection result normal?
YES >> GO TO 3.
G
NO >> Repair or replace harness or connectors.
3. CHECK GROUND CIRCUIT
Check continuity between BCM connector M20 and ground. H

BCM
Ground Continuity I
Connector Terminal
170
M20 — Yes
171 J
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair or replace harness or connectors. K
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diag- L
nosis Procedure INFOID:0000000014902921

M
Regarding Wiring Diagram information, refer to BCS-111, "Wiring Diagram".

WCS
1. CHECK FUSE
Check that the following fuse is not blown.
O
Terminal No. Signal name Fuse No.
161 BCM power supply 7 (10A)
P
Is the fuse blown?
YES >> Replace the blown fuse after repairing the affected circuit.
NO >> GO TO 2.
2. CHECK POWER SUPPLY CIRCUIT
1. Disconnect BCM connector M20.
2. Check voltage between BCM connector M20 and ground.

Revision: October 2016 WCS-43 2017 Rogue

 POWER SUPPLY AND GROUND CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >

BCM Voltage
Ground
Connector Terminal (Approx.)

M20 161 — Battery voltage

Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3. CHECK GROUND CIRCUIT
Check continuity between BCM connector M20 and ground.

BCM
Ground Continuity
Connector Terminal
170
M20 — Yes
171
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair or replace harness or connectors.

Revision: October 2016 WCS-44 2017 Rogue

 METER BUZZER CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
METER BUZZER CIRCUIT
A
Description INFOID:0000000014555617

• The buzzer for the warning chime system is installed in the combination meter. B
• The combination meter sounds the buzzer based on the signals transmitted from various units.
Component Function Check INFOID:0000000014555618

C
1. CHECK OPERATION OF METER BUZZER
1. Select “BUZZER” of “BCM” using CONSULT.
2. Perform “LIGHT WARN ALM” or “SEAT BELT WARN TEST” in “Active Test”. D
Does meter buzzer activate?
YES >> Inspection End.
NO >> Refer to WCS-45, "Diagnosis Procedure". E

Diagnosis Procedure INFOID:0000000014555619

1.CHECK COMBINATION METER INPUT SIGNAL F

Select the “Data Monitor” of “METER/M&A” using CONSULT and check the “BUZZER” monitor value.
G
Monitor item Condition Status
Under the condition of buzzer input On
BUZZER
Except above Off H
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-87, "Removal and Installation".
NO >> Replace BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key system) or BCS- I
134, "Removal and Installation" (without Intelligent Key system).

WCS

Revision: October 2016 WCS-45 2017 Rogue

 SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
Description INFOID:0000000014555620

Transmits a seat belt buckle switch signal to the combination meter.

Component Function Check INFOID:0000000014555621

1. CHECK COMBINATION METER INPUT SIGNAL

1. Ignition ON.
2. Monitor seat belt warning lamp while fastening and unfastening the driver seat belt buckle.

Condition Warning lamp status

When driver seat belt buckle is unfastened ON
When driver seat belt buckle is fastened OFF
Is the inspection result normal?
YES >> Inspection End.
NO >> Refer to WCS-46, "Diagnosis Procedure".
Diagnosis Procedure INFOID:0000000014555622

Regarding Wiring Diagram information, refer to WCS-31, "Wiring Diagram".

1. CHECK COMBINATION METER INPUT SIGNAL

1. Turn ignition switch ON.
2. Check voltage between combination meter harness connector M76 terminal 28 and ground.

Combination meter
Voltage
Terminals Condition
Connector (Approx.)
(+) (-)
When seat belt LH is fastened Battery voltage
M76 28 Ground
When seat belt LH is unfastened 0V
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-87, "Removal and Installation".
NO >> GO TO 2.
2. CHECK SEAT BELT BUCKLE SWITCH LH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter harness connector M76 and seat belt buckle switch LH harness connector
B87.
3. Check continuity between combination meter harness connector M76 terminal 28 and seat belt buckle
switch LH harness connector B87 terminal 1.

Combination meter Seat belt buckle switch LH

Continuity
Connector Terminal Connector Terminal
M76 28 B87 1 Yes
4. Check continuity between combination meter harness connector M76 terminal 28 and ground.

Revision: October 2016 WCS-46 2017 Rogue

 SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >

Combination meter A
Continuity
Connector Terminal Ground
M76 28 No
B
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connector. C
3. CHECK SEAT BELT BUCKLE SWITCH LH GROUND CIRCUIT
Check continuity between seat belt buckle switch LH harness connector B87 terminal 2 and ground.
D
Seat belt buckle switch LH
Continuity
Connector Terminal Ground
E
B87 2 Yes
Is the inspection result normal?
YES >> Inspection End. F
NO >> Repair or replace harness or connector.
Component Inspection INFOID:0000000014555623
G
1. CHECK SEAT BELT BUCKLE SWITCH LH
1. Turn ignition switch OFF. H
2. Disconnect the seat belt buckle switch LH connector.
3. Check continuity between the seat belt buckle switch LH terminals 1 and 2.
I
Seat belt buckle switch LH
Condition Continuity
Terminals
When seat belt buckle LH is fastened No J
1– 2
When seat belt buckle LH is unfastened Yes
Is the inspection result normal?
K
YES >> Inspection End.
NO >> Replace the seat belt buckle switch LH. Refer to SR-31, "Removal and Installation".

WCS

Revision: October 2016 WCS-47 2017 Rogue

 PARKING BRAKE SWITCH SIGNAL CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
PARKING BRAKE SWITCH SIGNAL CIRCUIT
Component Function Check INFOID:0000000014555624

1.CHECK PARKING BRAKE SWITCH OPERATION

Check that brake warning lamp in combination meter turns ON/OFF when parking brake is actuated.
Is the inspection result normal?
YES >> Inspection End.
NO >> Proceed to diagnosis procedure. Refer to WCS-48, "Diagnosis Procedure".
Diagnosis Procedure INFOID:0000000014555625

Regarding Wiring Diagram information, refer to WCS-31, "Wiring Diagram".

1.CONNECTOR INSPECTION
1. Turn ignition switch OFF.
2. Disconnect combination meter and parking brake switch connectors.
3. Check connectors and terminals for deformation, disconnection, looseness or damage.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace as necessary.
2.CHECK PARKING BRAKE SWITCH
Check parking brake switch. Refer to WCS-49, "Component Inspection".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Replace parking brake switch. Refer to PB-11, "Removal and Installation".
3.CHECK PARKING BRAKE SWITCH SIGNAL
With CONSULT.
1. Connect combination meter connector and parking brake switch connectors.
2. Turn ignition switch ON.
3. Select “METER/M&A”.
4. Monitor “PKB SW” in “Data Monitor” while applying and releasing the parking brake.

Monitor item Condition Status

When parking brake is applied. ON
PKB SW
When parking brake is released. OFF
Is the inspection result normal?
YES >> Refer to WCS-40, "Work Flow".
NO >> GO TO 4.
4.CHECK PARKING BRAKE SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter and parking brake switch connectors.
3. Check continuity between combination meter connector M76 terminal 26 and parking brake switch con-
nector E52 terminal 1.

Combination meter Parking brake switch

Continuity
Connector Terminal Connector Terminal
M76 26 E52 1 Yes
4. Check continuity between combination meter connector and ground.

Revision: October 2016 WCS-48 2017 Rogue

 PARKING BRAKE SWITCH SIGNAL CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >

Combination meter A
— Continuity
Connector Terminal
M76 26 Ground No
B
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-87, "Removal and Installation".
NO >> Repair or replace malfunctioning components. C
Component Inspection INFOID:0000000014555626

1.CHECK PARKING BRAKE SWITCH D

1. Turn ignition switch OFF.
2. Disconnect parking brake switch connector.
3. Check continuity between parking brake switch terminal 1 and ground. E

Parking brake switch

Ground Condition Continuity
Terminal F
Parking brake actuated Yes
1 —
Parking brake released No
G
Is the inspection result normal?
YES >> Inspection End.
NO >> Replace parking brake switch. Refer to PB-11, "Removal and Installation". H

WCS

Revision: October 2016 WCS-49 2017 Rogue

 KEY SWITCH SIGNAL CIRCUIT (WITHOUT INTELLIGENT KEY)
< DTC/CIRCUIT DIAGNOSIS >
KEY SWITCH SIGNAL CIRCUIT (WITHOUT INTELLIGENT KEY)
Description INFOID:0000000014555627

Transmits a key switch signal to the BCM.

Component Function Check INFOID:0000000014555628

1. CHECK BCM INPUT SIGNAL

Select “Data Monitor” of “BCM” using CONSULT and check the “KEY SW” monitor value.

Monitor Item Condition Status

When key is removed from key cylinder OFF
KEY SW
When key is inserted into key cylinder ON
Is the inspection result normal?
YES >> Inspection End.
NO >> Refer to WCS-50, "Diagnosis Procedure".
Diagnosis Procedure INFOID:0000000014555629

Regarding Wiring Diagram information, refer to WCS-31, "Wiring Diagram".

1. CHECK BCM INPUT SIGNAL

Check voltage between BCM harness connector M19 terminal 81 and ground.

BCM Voltage
Ground Condition
Connector Terminal (Approx.)

Key is inserted Battery voltage

M19 81 —
Key is removed 0V
Is the inspection result normal?
YES >> Inspection End.
NO >> GO TO 2.
2. CHECK KEY SWITCH CIRCUIT
1. Disconnect BCM connector M19 and key switch connector M105.
2. Check continuity between BCM harness connector M19 terminal 81 and key switch harness connector
M105 terminal 1.

BCM Key switch

Continuity
Connector Terminal Connector Terminal
M19 81 M105 1 Yes
3. Check continuity between BCM harness connector M19 terminal 81 and ground.

BCM
Ground Continuity
Connector Terminal
M19 81 — No
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connector.

Revision: October 2016 WCS-50 2017 Rogue

 KEY SWITCH SIGNAL CIRCUIT (WITHOUT INTELLIGENT KEY)
< DTC/CIRCUIT DIAGNOSIS >
3. CHECK KEY SWITCH POWER SUPPLY CIRCUIT A
Check voltage between key switch harness connector M105 terminal 1 and ground.

Key switch Voltage B

Ground
Connector Terminal (Approx.)

M105 1 — Battery voltage

C
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace harness or connector.
D
4. CHECK KEY SWITCH GROUND CIRCUIT
Check continuity between key switch harness connector M105 terminal 2 and ground.
E
Key switch
Ground Continuity
Connector Terminal
F
M105 2 — Yes
Is the inspection result normal?
YES >> Replace key switch. Refer to SEC-208, "Removal and Installation". G
NO >> Repair or replace harness or connector.
Component Inspection INFOID:0000000014555630
H
1. CHECK KEY SWITCH
1. Turn ignition switch OFF.
2. Disconnect key switch. I
3. Check continuity between key switch terminals 1 and 2.

Key switch
J
Condition Continuity
Terminal
When key is removed from key cylinder No
1 2 K
When key is inserted into key cylinder Yes
Is the inspection result normal?
YES >> Inspection End. L
NO >> Replace key switch. Refer to SEC-208, "Removal and Installation".

WCS

Revision: October 2016 WCS-51 2017 Rogue

 WARNING CHIME SYSTEM SYMPTOMS
< SYMPTOM DIAGNOSIS >
SYMPTOM DIAGNOSIS
WARNING CHIME SYSTEM SYMPTOMS
Symptom Table INFOID:0000000014555631

CAUTION:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagno-
sis if any DTC is detected.

Symptom Possible cause Inspection item

• Harness between BCM and front door switch LH.
The light reminder warning does not sound. • Front door switch LH Refer to WCS-
• BCM 55.
• Combination meter
• Harness between combination meter and parking brake switch.
The parking brake release warning contin- • Parking brake switch Refer to WCS-
ues sounding or does not sound. • BCM 53.
• Combination meter
• Harness between combination meter and seat belt buckle switch LH.
The seat belt warning continues sounding • Seat belt buckle switch LH Refer to WCS-
or does not sound. • BCM 54.
• Combination meter
• BCM Refer to WCS-
Warning chime does not sound at all.
• Combination meter 45.

Revision: October 2016 WCS-52 2017 Rogue

 THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR
DOES NOT SOUND
< SYMPTOM DIAGNOSIS >
THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR
A
DOES NOT SOUND
Description INFOID:0000000014555632
B
• The parking brake warning buzzer sounds continuously during vehicle travel though the parking brake is
released.
• The parking brake warning buzzer does not sound at all even though driving the vehicle with the parking C
brake applied.
Diagnosis Procedure INFOID:0000000014555633

D
1. CHECK PARKING BRAKE WARNING LAMP
1. Start the engine.
2. Check the operation of the brake warning lamp by operating the parking brake. E

Condition Warning lamp status

F
Parking brake applied ON
Parking brake released OFF
Is the inspection result normal? G
YES >> Replace the combination meter. Refer to MWI-87, "Removal and Installation".
NO >> GO TO 2.
2. CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT H

Check the parking brake switch signal circuit. Refer to WCS-48, "Diagnosis Procedure".
Is the inspection result normal? I
YES >> GO TO 3.
NO >> Repair or replace harness or connector.
3. CHECK PARKING BRAKE SWITCH UNIT J
Check the parking brake switch. Refer to WCS-49, "Component Inspection".
Is the inspection result normal?
K
YES >> Replace the combination meter. Refer to MWI-87, "Removal and Installation".
NO >> Replace the parking brake switch. Refer to PB-11, "Removal and Installation".

WCS

Revision: October 2016 WCS-53 2017 Rogue

 THE SEAT BELT REMINDER WARNING CONTINUES SOUNDING, OR DOES
NOT SOUND
< SYMPTOM DIAGNOSIS >
THE SEAT BELT REMINDER WARNING CONTINUES SOUNDING, OR
DOES NOT SOUND
Description INFOID:0000000014555634

• Seat belt warning does not sound even though driver seat belt is not fastened.
• Seat belt warning sounds even though driver seat belt is fastened.
Diagnosis Procedure INFOID:0000000014555635

1.CHECK WARNING CHIME OPERATION

1. Select “BUZZER” of “BCM” using CONSULT.
2. Perform “SEAT BELT WARN TEST” in “Active Test”.

Component CONSULT Condition

ON
Buzzer SEAT BELT WARN TEST
OFF
Is the inspection result normal?
YES >> GO TO 2.
NO >> Replace combination meter. Refer to MWI-87, "Removal and Installation".
2.CHECK COMBINATION METER INPUT SIGNAL
Check the combination meter input signal. Refer to WCS-46, "Component Function Check".
Is the inspection result normal?
YES >> Replace BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key system) or BCS-
134, "Removal and Installation" (without Intelligent Key system).
NO >> GO TO 3.
3.CHECK SEAT BELT BUCKLE SWITCH LH CIRCUIT
Check the seat belt buckle switch LH circuit. Refer to WCS-46, "Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace harness or connector.
4.CHECK SEAT BELT BUCKLE SWITCH LH
Check the seat belt buckle switch LH. Refer to WCS-47, "Component Inspection".
Is the inspection result normal?
YES >> Replace the combination meter. Refer to MWI-87, "Removal and Installation".
NO >> Replace the seat belt buckle switch LH. Refer to SR-31, "Removal and Installation".

Revision: October 2016 WCS-54 2017 Rogue

 THE LIGHT REMINDER WARNING DOES NOT SOUND
< SYMPTOM DIAGNOSIS >
THE LIGHT REMINDER WARNING DOES NOT SOUND
A
Description INFOID:0000000014555636

Light reminder warning does not sound even though headlamp is illuminated. B
Diagnosis Procedure INFOID:0000000014555637

1.CHECK COMBINATION METER INPUT SIGNAL C

Select the “Data Monitor” of “METER/M&A” using CONSULT and check the “BUZZER” monitor value.

Monitor item Condition Status D

Under the condition of buzzer input On
BUZZER
Except above Off
E
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-87, "Removal and Installation".
NO >> GO TO 2. F
2.CHECK FRONT DOOR SWITCH LH SIGNAL CIRCUIT
Check the front door switch LH signal circuit. Refer to DLK-193, "Diagnosis Procedure" (with Intelligent Key
system) or DLK-379, "Diagnosis Procedure" (without Intelligent Key system). G
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connector. H

3.CHECK FRONT DOOR SWITCH LH

Check the front door switch LH. Refer to DLK-194, "Component Inspection" (with Intelligent Key system) or I
DLK-380, "Component Inspection" (without Intelligent Key system).
Is the inspection result normal?
YES >> Replace the BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key system) or J
BCS-134, "Removal and Installation" (without Intelligent Key system).
NO >> Replace the front door switch LH. Refer to DLK-319, "Removal and Installation" (with Intelligent
Key system) or DLK-447, "Removal and Installation" (without Intelligent Key system).
K

WCS

Revision: October 2016 WCS-55 2017 Rogue

 THE KEY WARNING DOES NOT SOUND (WITHOUT INTELLIGENT KEY)
< SYMPTOM DIAGNOSIS >
THE KEY WARNING DOES NOT SOUND (WITHOUT INTELLIGENT KEY)
Description INFOID:0000000014555638

The key warning chime does not sound, when all of the following conditions are fulfilled:
• Key inserted into the key cylinder (key switch signal ON).
• Ignition switch is in OFF position (ignition switch signal OFF).
• Driver side door is open (front door switch LH ON)
Diagnosis Procedure INFOID:0000000014555639

1.CHECK BCM INPUT SIGNAL

1. Connect CONSULT.
2. Select the “Data Monitor” of “BCM (BUZZER)” and check the “KEY SW” monitor value.

Monitor item Condition Status

Under the condition of buzzer input On
KEY SW
Except above Off
Is the inspection result normal?
YES >> Replace the BCM. Refer to BCS-134, "Removal and Installation".
NO >> GO TO 2.
2.CHECK KEY SWITCH SIGNAL CIRCUIT
Check the key switch signal circuit. Refer to WCS-50, "Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connector.
3.CHECK KEY SWITCH
Check the key switch. Refer to WCS-51, "Component Inspection".
Is the inspection result normal?
YES >> Replace the BCM. Refer to BCS-134, "Removal and Installation".
NO >> Replace key switch. Refer to SEC-208, "Removal and Installation".

Revision: October 2016 WCS-56 2017 Rogue