Shivaji University , Kolhapur

Question Bank For Mar 2022 ( Summer ) Examination

Subject Code :80923 Subject Name : Internet of Things

Common subject Code (if any) ______________________________________

1) What is Internet of Things?

A. It is the inter-networking of physical devices embedded with electronics, software, sensors, actuators,
and network connectivity that enable these objects to collect and exchange data.

B. It is protocol to access internet

C. It set of services used to access internet

D. None of above

2) What is EPC in IoT?

A. Electrical Process Component

B. Electronic Process Code

C. Electrical Process Code

D. Electronic Product Code

3) __________ communication modules are usually integrated directly into target devices, such as
automated meter readers (AMRs), vending machines, alarm systems, surveillance cameras, and
automotive equipment, to list a few.

A. H2H

B. M2M

C. MiH

D. M2H

4) ITU –T views about IOT is

A. IoT is just a concept

B. IoT is an infrastructure
C. Both a and b
D. None of above
5) IoT was originally introduced by the Auto‐ID research center at

The

A. Google
B. Bell Labs
C. MIT
D. Accenture Labs

6) ITU view of ubiquitous networking contains

A. anywhere connectivity
B. anytime connectivity
C. anything connectivity
D. all of the above

7) Glucose sensor installed in body of human to get blood sugar level is the example of____________.

A. H2H

B. M2M

C. MiH

D. M2H

8) Temperature sensors installed in a server room transfers the temperature data to the server for
controlling air conditioners automatically. This the example of _________________.

A. H2H

B. M2M

C. MiH

D. M2H

9) e‐Health applications include _____________________.

A. health and fitness

B. road safety

C. Privacy and security

D. All of above
10) What is MBANs?

A. Mobile Body Area Networks

B. Medical Body Area Networks

C. Mobile Body Access Networks

D. Medical Body Access Networks.

11) What is WBANs

A. Wireless Body Area Networks

B. Wireless Body Access Networks.

C. Wireless Body Access Networks

D. Wireless Body Area Networks

12) The bit length of the IPV6 address is _________

A. 8 bit
B. 16 bit
C. 64 bit
D. 128 bit

13) Identification codes can be classified as :

A. object IDs (OIDs)

B. communication IDs

C. Both of above

D. None of above

14) Which of following is not a structural aspect of IoT.

A. Traffic characteristic

B. Scalability

C. Interoperability

D. Consistency
15) A ___________ is an infrastructure comprising sensing (measuring), computing, and communication
elements that gives the administrator the ability to instrument, observe, and react to events and
phenomena in a specified environment.

A. device power

B. sensor network

C. device intelligence

D. internet of things

16) Which of the following is correct sentence

A. Object Name Service (ONS) is a mechanism that leverages Domain Name System (DNS) to discover
information about a product and related services from the Electronic Product Code (EPC).
B. object name service (ONS) will also be important in the IoT to map the “thing-friendly” names of
object which may belong to heterogeneous name spaces
C. Both a and b
D. None of above

17) _________ are the machine to machine communication applications

A. Environment monitoring
B. smart meters
C. Supply chain management
D. All of the above

18) Which of following is a structural aspect of IoT?

A) Traffic characteristic

B) Scalability

C) Interoperability

D) All of the above

19) RFID is _________________.

A. Radio Frequency Identification

B. Random Frequency identification

C. both of above

D. None of above

20) Which of the following is not a component of RFID?

A. Transmitter

B. Receiver

C. Controller

D. Pre‐processor

21) Due to its global reach and the ability to support mobility in all geographical environments,
_________________ can play a critical role in many broadly distributed M2M applications.

A. satellite communications

B. sensor networks

C. RFIDs

D. Bluetooth networks

22) Which of the following is a standard for RFID?

A. IEEE 802.15.11

B. IEEE 802.15.4

C. ISO 14443

D. None of above
23) Which of the following is used to communicate between RFID card and RFID reader?

A. Radio waves

B. Infrared

C. wi‐fi

D. None of above

24) Which of following is a limitation of barcode over RFID system?

A. Object can’t be detected from far range

B. Wired connection is needed to detect the object

C. Object and scanner should be in a line of side

D. Scanner require more power

25) Which of the following is advantage of RFID over barcode system?

A. Can track multiple objects same time

B. More faster communication

C. Cost effective

D. All of above

26) Which of the following is not a component of RFID reader?

A. microcontroller

B. Microprocessor

C. RF signal generator

D. RF signal detector
27) Which of following is not a component of RFID tag?

A. Barcode

B. Transponder

C. Memory

D. Rectifier circuit

28) WSNs stands for _____________.

A. Wired Sensor Networks

B. Wireless Sensitive Networks

C. Wireless Sensor Networks

D. None of above

29) The sensor nodes are _________

A. Typically small in size

B. Consumes less power
C. Cost is low
D. All of the above

30) The energy source used in WSN (Node) are __________.

A. Battery
B. Inverter
C. Capacitor
D. None of the above

40) A radio transceiver in WSN ( node) contains which component internally?

A. Antenna
B. Wire
C. Electrode
D. None of the above
41) Does Raspberry Pi need external hardware?
a) True
b) False

42) What is the Ethernet/LAN cable used in RPi?

a) Cat5
b) Cat5e
c) Cat6
d) RJ45

43) What is the default user in Debain on Raspberry Pi?

a) Default
b) User
c) Pi
d) Root

44) What are the distributions are supported by raspberry Pi?

a) Arch Linux
b) Debain
c) Fedora Remix
d) Arch Linux, Debain, and Fedora Remix

45) What is GPIO pins in Raspberry Pi ?

a) General Purpose Input Output Pins

b) Gnome Process Inode Output

c) GNU Process Input Output

d) General Purpose Interactive OS

46) What are the capabilities of raspberry pi?

a) Browsing the internet

b) Making spreadsheets

c) Word pressing

d) All of the above

47) Which Raspberry Pi port is used to plug into monitor or modern television?

a) Ethernet port

b) HDMI port

c) Micro USB power port

d) None of the above

48) Where raspberry pi can use?

a) Home automation and security systems

b) Media center

c)HD surveillance camera

d) All of the above

49) Raspbian is __________

a) Assembler

b) Language

c) Compiler

d) OS

50) Following are examples of PANs (Personal Area Networks)

A. ZigBee

B. Bluetooth (BLE)

C. NFC

D. All of the above

51) A ___________is a network used for communication among intelligent

devices physically close to a person (including smartphones, tablets, body monitors,

and so on)

A. PAN / WPAN

B. WAN

C. MAN

D. LAN

52) Wireless Body Area Networks (WBANs) are also known as

A. Wireless Medical Body Area Networks [WMBANs]

B. Medical Body Area Network Systems [MBANSs]

C. Both (A) & (B)

D. None of the above

53) Following wireless networks/wireless information and communication technology can be utilized for
IoT/M2M application

A. Personal Area Networks, Wireless LANs, MANs

B. Wireless Sensor Networks, 3G/4G Cellular

C. Both A & B

D. None of the Above

54). In WBAN, key wireless standard includes -

A. ZigBee (IEEE 802.15.4)

B. Bluetooth (IEEE 802.15.1)

C. IEEE 802.15.6 and IEEE 802.15.4j

D. All of the Above

55). ZigBee makes use of physical radio specified by

A. IEEE 802.15.4

B. IEEE 802.11

C. IEEE 802.3

D. IEEE 802.5

56). IEEE 802.15.4 defines

A. a technical standard for wired communication

B. a technical standard for wireless communication

C. a technical standard which defines the operation of low-rate wireless personal area network (LR-
WPAN)

D. All of the above

57). IEEE 802.15.4 specifies the

A. physical layer and media access control for LR-WPANs

B. application layer of ZigBee

C. ZigBee Protocol stack

D. sublayer of application layer in ZigBee

58). ZigBee offers ____ communication between devices without need for the initial network
synchronization delays required by ___________

A. low-latency, Bluetooth

B. high delay, WLAN

C. QoS, Bluetooth

D. Bluetooth, WLAN
59). Which of the following is not a characteristic of ZigBee network

A. low-power consumption

B. easy installation

C. high data rate

D. unlicensed radio bands

60). Which of the following IEEE standard provides the lowest level of the ZigBee software stack ?

A. IEEE 802.11

B. IEEE 802.15.1

C. IEEE 802.15.3

D. IEEE 802.15.4

61). Bluetooth is ________________ .

A. WPAN technology

B. WLAN technology

C. Wireless standard

D. None of the Above

62). Bluetooth is based on __________________ .

A. IEEE 802

B. IEEE 801.15

C. IEEE 801.15.1

D. IEEE 802.15.1
63). Bluetooth is ___________________.

A. short-range data exchange communication protocol

B. long-range data exchange communication protocol

C. communication protocol

D. wireless protocol

64). Bluetooth operates in ___ ISM band and has a bandwidth approximately___ .

A. 2.4 Mhz, 100 Mbps

B. 2.4 GHz, 1-3 Mbps

C. 1.4 GHz, 1000Mbps

D. 2.4 KHz, 100 Mbps

65). Bluetooth uses which spread spectrum technique?

A. Time hopping

B. direct sequence spread spectrum

C. frequency hopping spread spectrum

D. chirp spread spectrum

66). The sublayer of IEEE 802.15 is/are as below,

A. RF Layer, Baseband layer

B. Link manager (an MAC level protocol)

C. Logical Link Control & Adaptation Protocol (L2CAP)

D. All of the above

67). Bluetooth is designed for

A. high QoS applications

B. variety of duty cycles

C. moderate data rates in n/w

D. All of above

68). IEEE standard for ZigBee, WLAN and Bluetooth are respectively,

A. 802.15.4, 802.11 and 802.15.1

B. 802.3, 802.4, 802.5

C. 802.11, 802.15, 802.11a

D. None of these

69). LTE is___ and designed to support___

A. Long Term Evaluation, Circuit-switched Networks

B. Latest Technological Evolution, Wired/Wireless Networks

C. Low Term Energy, Wireless LAN

D. Long Term Evolution, Packet Switched Network

70) Which is the electric information service infrastructure, that is placed between end-user and the power
utility?

A. Home Automation

B. Advanced Metering Infrastructure (AMI)

C. Home Automation Networking

D. None of these
71). Which technology consists of small, low powered sensors on the body that captures clinical
information such as temperature, respiratory functions, glucose level etc.

A. MBANs

B. WBANs

C. MBANS

D. All of these

(72). Personal wellness monitoring includes,

A. Senior activity monitoring scenario

B. Safety monitoring scenario

C. Both (A) & (B)

D. None of these

(73). In City automation, generic city sensors includes,

A. Environment sensors & activity sensors

B. light sensors & image sensors

C. traffic sensors & object detection sensors

D. None of these

(74). Environmental sensors includes

A. thermal sensor, hygrometric sensors

B. sound sensors, gas sensors

C. particle sensors, seismic sensors, light sensors

D. All of these

(75). Activity sensors include

A. pavement/roadway pressure

B. vehicle and pedestrian detection

C. parking space occupancy

D. All of these
UNIT 1:

1. What exactly is a connecting or connected object or thing in IOT?

2. Explain H2H communication and M2M communication?
3. Explain in brief “ Internet in the IOT”.
4. Short notes on :
5. Machine to Machine (M2M) communication
6. ITU-T views
7. Explain the concept of IOT and give its history?
8. Explain working definitions of IOT ?
9. Explain ITU view of ubiquitous networking ?
10. Explain various technologies used in IOT?
11. Draw and explain object classification diagram .
12. Explain Identification Technology in IOT.
UNIT 2:
1. What are environment characteristics of IOT/M2M nodes?
2. What is EPC? How EPC is used in RFID /sensor?
3. List and explain structural aspects of IOT ?
4. Draw a neat diagram RFID reader and explain its operation?*
5. List and explain key IOT technologies?
6. Explain Sensor technology in detail?
7. Explain in brief “Identification of IOT object And services”.
8. Brief Notes On:
a. Device power and sensor technology
b. Communication capabilities and Mobility Support
c. Satellite technology
d. EPC

UNIT 3

1. How does RFID system work?

2. List and explain components of RFID system?
3. Explain the networking nodes in details.
4. Explain the connecting node in details.
5. Explain different Types of nodes in WSN?
6. With the help of neat diagram explain RFID middleware.
7. What are the challenges faced by a modern WSN? Explain in detail .
8. Explain in brief Wireless node or Mote in WSN.
9. Short notes on:
 Communication in Wireless sensor network
 Principle of RFID
  RFID reader and RFID tag

UNIT 4:

1. What is Raspberry Pi and its working

2. How is Raspberry Pi used in IoT ? Explain with example
3. What are GPIO Pins used in Raspberry Pi boards?
4. Explain major hardware and software components of Raspberry Pi
5. Explain the I/O Ports (input output ports) of Raspberry Pi
6. What is Raspberry Pi? What operating system it works? Explain the details
7. What is Raspbian ? Explain the hardware and software components of Raspberry
Pi?
UNIT 5 :

1. What are the Wireless Technologies used for IoT? Explain any one in detail.
2. Explain NFC Technology in detail and why it is used in IoT?
3. Draw and explain Zigbee Protocol Stack.
4. Explain Zigbee/IEEE 802.15.4 for IoT?
5. Explain in detail Wireless Personal Area Network (WPAN).
6. Differentiate between WSN, WBAN and Cellular Wireless Network.
7. Explain LTE in details.
8. Explain in detail Cellular and Mobile Network Technologies.
9. Short notes on :
 IEEE 802.15.6.
 Bluetooth.
 NFC.

UNIT 6 :

1. Explain Smart metering IoT application in detail.

2. Explain benefits of MBAN technology.
3. Explain IoT automotive and transportation applications in brief.
4. Draw a neat Diagram of Advanced metering Infrastructure and Explain its
operations.
5. Discuss in detail Home Automation in IoT/M2M Context.
6. List and Explain any two Control application examples.
7. List and Explain any two Automotive Applications based on IoT.
8. How IoT is useful for development of Smart City?
9. Short Notes on :
 Smart metering.
 Smart Home Appliances.
 E-Health/Body area Network.