26/09/2024 13:50 Models, specifications, and compatibility

Home

Search

Help Center
You are here: Home > AOS-S and AOS-CX Transceiver Guide > SFP modules > Models, specifications, and compatibility

Models, specifications, and compatibility

Gigabit SFP optical transceiver modules use LC connectors.
The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. Where support
for a Revision A, B, or C transceiver existed, Revision D or E parts are also supported. Not all earlier revisions can be re-used on
newer product: Check the tables below and compare the 4x4 number of the part to the list of supported 4x4 numbers. See
Identification of 4x4 part numbers for more information.

Specifications for Gigabit SFP optical transceiver modules

DOM
digital Nominal
Product optical wl (nm) & Fiber Modal
name monitoring encoding Fiber diameter bandwidth Transmission
(SKU) (4x4 part #) type mode (µm) (MHz*km) distance

HPE X121 1G SFP LC SX Yes Single lane, MMF 50/125 500 (OM2) 550m (1804.46
Transceiver (J4858C) (1990-4415 1990-4395 1990-4750 850 400 ft)
1990-4793 ) 1x1G NRZ 500 m (1640.42
Aruba 1G SFP LC SX 500m JL780A: (1990-4763, 1990-4765) ft)
MMF xcvr (J4858D)

Aruba 1G SFP LC SX 500m

MMF TAA xcvr (JL745A)
62.5/125 200 (OM1) 275m (902.23 ft)
160 220m (721.78 ft)
Aruba 1G I-Tmp SFP LC SX
500m MMF xcvr (JL780A)

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 1/13
26/09/2024 13:50 Models, specifications, and compatibility

DOM
digital Nominal
Product optical wl (nm) & Fiber Modal Home
name monitoring encoding Fiber diameter bandwidth Transmission
(SKU) (4x4 part #) type mode (µm) (MHz*km) distance

HPE X121 1G SFP LC LX Yes Single lane, SMF 9/125 N/A 10km (6.21
Transceiver (J4859C) (1990-4116, 1990-4414, 1990- 1310 miles)
4608, 1990-4762) 1x1G NRZ
Aruba 1G SFP LC LX 10km JL781A: (1990-4764, 1990-4766)
SMF xcvr (J4859D) MMF 50/125 500 or 400 550m (1804.46
ft)
Aruba 1G SFP LC LX 10km
SMF TAA xcvr (JL746A)
MMF 62.5/125 500 550m (1804.46
Aruba 1G I-Tmp SFP LC LX ft)
10km SMF xcvr (JL781A)

HPE X121 1G SFP LC LH Yes Single lane, SMF 9/125 N/A 70km (43.49
Transceiver (J4860C) (1990-4363) 1550 miles)
1x1G NRZ
Aruba 1G SFP LC LH 70km
SMF xcvr (J4860D)

/*]]>*/ Optical specifications for Gigabit SFP optical transceiver modules

Optical parameters (dBm)

Product name (SKU)
Transmit power Receive power

HPE X121 1G SFP LC SX Transceiver –9.5 to 0 –17 to –3

(J4858C)

Aruba 1G SFP LC SX 500m MMF

xcvr (J4858D)

Aruba 1G SFP LC SX 500m MMF

TAA xcvr (JL745A)

Aruba 1G ITmp SFP LC SX 500m

MMF xcvr (JL780A)

HPE X121 1G SFP LC LX Transceiver –9.5 to –3 –20 to –3

(J4859C)

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 2/13
26/09/2024 13:50 Models, specifications, and compatibility

Optical parameters (dBm)

Product name (SKU)
Transmit power Receive power Home
Aruba 1G SFP LC LX 10km SMF xcvr
(J4859D)

Aruba 1G SFP LC LX 10km SMF

TAA xcvr (JL746A)

Aruba 1G ITmp SFP LC LX 10km

SMF xcvr (JL781A)

HPE X121 1G SFP LC LH Transceiver 0 to +5 –22 to –3

(J4860C)
(use 8dB attenuator for short SMF cables)
Aruba 1G SFP LC LH 70km SMF xcvr
(J4860D)

Compatibility for gigabit SFP optical transceiver modules

Minimum
software
SFP (1G) required
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

2510 Switch J9019A/B, J9020A, J9279A, J9280A All

Series

2520 Switch J9137A, J9138A, J9298A, J9299A All

Series

2530 Switch J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, All
Series J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A,
J9855A, J9856A

2540 Switch JL354A, JL355A, JL356A, JL357A All

Series

2600 Switch J4899A/B/C, J4900A/B/C, J8164A, J8165A, J8762A H.08.98

Series

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 3/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

2610 Switch J9085A, J9086A, J9087A, J9088A, J9089A All

Series

2615-8-PoE J9565A All

Switch

2620 Switch J9623A, J9624A, J9625A, J9626A, J9627A All

Series

2800 Switch J4903A, J4904A I.08.103

Series

2810 Switch J9021A, J9022A All

Series

2900 Switch J9049A, J9050A T.13.45

Series

2910al J9145A, J9146A, J9147A, J9148A All For use in the SFP ports on the models listed,
Switch and in the J9008A 2-port 10GbE SFP⁠+ al
Series module.

2915-8G- J9562A All

PoE Switch

2920 Series J9726A, J9727A, J9728A, J9729A, J9836A All For use in the SFP ports on the models listed.
Switches Also for use in the dual-speed SFP⁠+ ports of
the J9731A 2-Port 10GbE SFP⁠+ Module.

2930F Series JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, J4858C/D,
Switches JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A J4859C/D,
J4860C/D: All WC
Software
JL745A, JL746A
(TAA xcvrs): WC
16.08.0021 and
16.10.0006 and later

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 4/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

2930M JL319A, JL320A, JL321A, JL322A, JL323A, JL324A J4858C/D, For use in SFP ports on switch and an
Switch J4859C/D, installed JL083A Aruba 3810M/2930M
Series J4860C/D: All WC 4SFP⁠+ MACsec Module.
Software
JL745A, JL746A
(TAA xcvrs): WC
16.08.0021 and
16.10.0006 and later

3400cl J4905A, J4906A All

Switch
Series

3500 Series J9470A, J9471A, J9472A, J9473A K.14.31

Switches

3500yl J8692A, J8693A All For use in the SFP ports on the models listed,
Switch and in an installed J9312A 10GbE 2-port
Series SFP⁠+/2-port CX4 yl Model

J9310A, J9311A K.14.50

3800 Switch J9573A, J9574A, J9575A, J9576A, J9584A All

Series

3810M JL071A, JL072A, JL073A, JL074A, JL076A, JL075A J4858C/D, For use in the JL075A 3810M switch. Also
Switch J4859C/D, for use in any 3810M switch with a JL083A
Series J4860C/D: All Aruba 3810M/2930M 4SFP⁠+ MACsec
Software Module installed.
JL745A, JL746A
(TAA xcvrs):
16.08.0021 and
16.10.0006 and later

4100gl J4893A, J4908A G.07.103

Switch
Series

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 5/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

Aruba 4100i JL817A, JL818A J4858D, J4859D, Hi Temp warnings will trigger at lower
Switch J4860D: 10.08.0001 temperatures (~50C)if Commercial Temp vs
Series (Commercial Temp) Industrial Temp transceivers (~70C) are used.
JL780A, JL781A: All Third Party transceivers are treated as
10.08.0001 (Ind Commercial Temp, regardless of capability.
Temp)

4200vl J8776A, J9033A All

Switch
Series

5300xl J4878A/B, J4907A E.10.36

Switch
Series

5400zl J8705A, J8706A All

Switch
Series
J9308A, J9309A K.14.34 The J9309A 4-port SFP+ module only
supports 10G transceivers.

J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A K.15.02.0004 The J9538A 8-port SFP⁠+ v2 module supports
both 1G and 10G transceivers.

5400R J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A J4858C/D, The J9538A 8-port SFP⁠+ v2 module supports
Switch J4859C/D, both 1G and 10G transceivers.
Series J4860C/D: All
Software
JL745A, JL746A
(TAA xcvrs):
16.08.0021 and
16.10.0006 and later

J9988A, J9989A, J9990A, J9993A KB.15.17

Aruba All models J4858C/J4858D, Only the following 4x4 part

6000 (1G uplink only) NO support for J4859C/J4859D: numbers are supported:
Switch 100Mbps FX. JL745A, JL746A J4858C/J4858D:
Series (TAA): 1990-4395
10.08.0001
https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 6/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments
1990-4750
1990-4793
J4859C/J4859D
1990-4116
J4860C/J4860D: not
1990-4414
supported

Aruba 6100 All models J4858C/J4858D, Only the following 4x4 part numbers are
Switch J4859C/J4859D: supported:
Series 10.06.0001 J4858C/J4858D:
JL745A, JL746A 1990-4395
(TAA xcvrs):
10.06.0130 and 1990-4750
10.07.0010 1990-4793
J4859C/J4859D:
1990-4762
J4860C/J4860D: not
supported

6108 Switch J4902A H.07.88

6120 Blade 498358-B21, 516733-B21 SX, LX: all versions

Switch LH: not supported
Series

6200yl-24G- J8992A All

mGBIC
Switch

Aruba 6200 All 6200F models 12p models R8Q72A/R8V13A (TAA) J4858C/J4858D, Only the following 4x4 part numbers are
Switch J4859C/J4859D, supported:
Series J4860C/J4860D: J4858C/J4858D:
10.04.1000 1990-4395
JL745A, JL746A 1990-4750
(TAA): 10.06.0130 1990-4793
and 10.07.0010
J4859C/J4859D:
1990-4762
J4860C/J4860D:
https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 7/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments
All 6200M models and 6200F 12p models J4858C/J4858D, 1990-4363
R8Q72A/R8V13A(TAA) J4859C/J4859D,
J4860C/J4860D:
JL745A, JL746A
(TAA):
10.11.0005

Aruba 6200F
B-revision JL724B through JL728B,
S0M81A through S0M90A J4858C/J4858D,
J4859C/J4859D,
J4860C/J4860D:
JL745A, JL746A
Aruba 6300 Switch Series only:
(TAA):10.13.0001
Hardware limitations for the
following SKUs:

6300M R8S89A and R8S90A and 6300L

S3L75A and S3L76A: Cannot support 1G
transceivers in uplinks

Aruba 6300 All models except JL762A, R8S89A, R8S90A, R8S91A, 10.04.0001
Switch R8S92A:
Series
JL745A, JL746A (TAA xcvrs): 10.06.0130 and
10.07.0010 R8S91A port 51-52 require the
interface-group {n} speed 10
JL762A (6300 Pwr2Prt): 10.08.0001 command (the ports default to
10G use-case).
R8S91A, R8S92A: 10.10.0002 This is different than other
6300 models that auto-detect
R8S89A/R8S90A: Refer to Comments the inserted transceiver.
column This may affect Zero-Touch-
Provisioning (ZTP) due to a
S0E91A, S0X44A (100G models) Not supported non-factory config. (ZTP is OK
through QSA28 (the on these models if 10G optics
QSFP28 port cannot are used, for R8S91A, 10G is
https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 8/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments
support 1G speeds) the default for ports 51-52).

Aruba 6300L All models R8S92A 1G only in ports 1-24

10.14.0001
Switch S3L75A, S3L76A: No support for 1G (1G not supported in uplinks
Series S3L77A: Only in ports 51-52 ports 49-52).

Aruba 6400 R0X39B, R0X40B J4858C/J4858D, R0X39A/R0X40A (revision A) are no longer

Modules R0X41A, R0X42A, R0X43A J4859C/J4859D, supported for use in the 6400 series.
J4860C/J4860D: Only the following 4x4 part numbers are
10.04.1000 supported:
JL745A, JL746A J4858C/J4858D:
(TAA): 10.06.0130
and 10.07.0010 1990-4395
1990-4750
R0X44A For R0X44A module: 1990-4793
J4858C/J4858D, J4859C/J4859D:
J4859C/J4859D,
J4860C/J4860D: 1990-4762
10.04.2000 R0X44A/R0X44C when in default mode,
JL745A, JL746A auto-detects the inserted type of transceiver; it
(TAA xcvrs): does NOT require any interface groups like
10.06.0130 and the 8325.
10.07.0010
R0X44C has the added feature of enabling the
R0X39C, R0X40C, R0X41C, R0X42C, 10.09.1000 bottom ports to accept a 50G product, and in
R0X43C, this mode, will NOT accept these 1G
transceivers(see 50G SFP56 chapter).
R0X44C

S1T83A (24p SR10 4p 100G) 10.13.1000

S0E48A (32p 25G 4p 100G) Not supported

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 9/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

6600 Switch J9263A, J9264A K.14.03

Series
J9451A K.14.24

Aruba 8100 Models with SFP+ ports J4858C/J4858D, Only in SFP+ ports NOT supported thru
Series J4859C/J4859D, QSA28
J4860C/J4860D:
JL745A, JL746A
(TAA xcvrs):
10.12.000x

8200zl J8705A, J8706A All

Switch
Series J9308A, J9309A K.14.34 The J9309A 4-port SFP⁠+ module only
supports 10G transceivers

J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A K.15.02.0004 The J9538A 8-port SFP⁠+ v2 module supports
both 1G and 10G transceivers.

Aruba 8320 JL479A J4858C/J4858D, Only the following 4x4 part numbers are
48p 10G J4859C/J4859D, supported:
SFP/SFP⁠+ J4860C/J4860D: J4858C/J4858D:
and 6p 40G 10.03.0001
1990-4395
QSFP⁠+ JL745A, JL746A
Switch (TAA xcvrs): 1990-4750
10.06.0130 and 1990-4793
10.07.0010 J4859C/J4859D:
1990-4762
J4860C/J4860D:
1990-4363

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 10/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

Aruba 8325 JL635A displayed by CLI (show system) J4858C/J4858D, Only the following 4x4 part numbers are
Switch JL624A - Port-to-Power model (FB) J4859C/J4859D, supported:
Series J4860C/J4860D: J4858C/J4858D:
JL625A - Power-to-Port model (BF) 10.03.0010
1990-4395
JL745A, JL746A
(TAA xcvrs): 1990-4750
10.06.0130 and 1990-4793
10.07.0010 J4859C/J4859D:
1990-4762
J4860C/J4860D:
1990-4363
The 8325 requires configuration of "interface
groups" (groups of 12 ports) to enable use of
1G or 10G transceivers or DACs in the SFP28
ports (Interface Groups default to 25G speed).
See the Hardware Guides for details.
1G optics at the opposite end of the link must
NOT enable auto-negotiation and operate in
full duplex mode.

Aruba 8360 8360 32Y4C models JL717A/JL717C(v2), Only the following 4x4 part numbers are
Switch JL717A/JL717C(v2) displayed by CLI (show system) JL718A/JL718C(v2), supported:
Series JL722A/JL722C(v2): J4858C/J4858D:
JL700A/JL700C(v2) Port-to-Power model
J4858C/J4858D, 1990-4395
JL700A/JL700C(v2) A Power-to-Port model J4859C/J4859D,
8360 16Y2C models J4860C/J4860D: 1990-4750
JL718A/JL718C(v2) displayed by CLI (show system) 10.06.0001 1990-4793
JL745A, JL746A J4859C/J4859D:
JL702A/JL702C(v2) Port-to-Power model (TAA xcvrs):
JL702A/JL702C(v2) A Power-to-Port model 1990-4762
10.06.0130 and
8360 24XF2C models 10.07.0010 J4860C/J4860D:
JL722A/JL722C(v2) displayed by CLI (show system) 1990-4363
JL710A/JL710C(v2) Port-to-Power model JL719C: The 8360 32Y4C and 48Y6C models require
J4858C/J4858D, configuration of "interface groups" only for
JL711A/JL711C(v2) Power-to-Port model J4859C/J4859D, ports 1-4 (as group #1) to enable the use of
8360 48Y6C models J4860C/J4860D: 10G transceivers / DACs in the SFP28 ports
JL719C displayed by CLI (show system) 10.09.0002 (Interface Groups default to 25G speed). Ports
JL745A, JL746A 1-4 on the 8360 32Y4C model do not support
JL704C(v2) Port-to-Power model (FB) 1G transceivers.
(TAA xcvrs):
JL705C(v2) Power-to-Port model (BF) 10.09.0002 All other ports can individually auto-detect
the speed of the inserted xcvr.
https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 11/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments
Not applicable to the 24XF (1G/10G) model
See the Hardware Guides for details.

Aruba JL363A For JL363A module: Only the following 4x4 part numbers are
8400X JL687A J4858C/J4858D, supported:
Modules J4859C/J4859D, J4858C/J4858D:
J4860C/J4860D: 1990-4395
10.00.0018
1990-4750
JL745A, JL746A
(TAA xcvrs): 1990-4793
10.07.0005 J4859C/J4859D:
For JL687A module: 1990-4762
J4858C/J4858D, J4860C/J4860D:
J4859C/J4859D,
J4860C/J4860D: 1990-4363
10.04.2000 JL687A 32p 25G module
JL745A, JL746A requires configuration of
(TAA xcvrs): interface groups (groups of 4
10.07.0005 ports) to enable use of 1G or
10G transceivers or DACs in
the SFP28 ports (Interface
Groups default to 25G speed).
See the Hardware Guides for
details.
JL687A: 1G optics at the
opposite end of the link must
not enable auto-negotiation
and operate in full duplex
mode (does not apply to the
JL363A module)

9300 Switch Not supported 1G products are not supported on the 9300
Series 32D model

9300m J4885A, J4894A All

Switch
Series

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 12/13
26/09/2024 13:50 Models, specifications, and compatibility

Minimum
software
SFP (1G) required Home
capable (J4858C/J4858D,
product J4859C/J4859D,
name SKU J4860C/J4860D) Comments

9408sl J8684A All

Switch

Aruba 10000 R8S96A displayed by CLI (show system) J4858D, J4859D, The 10000 series requires configuration of
Switch R8P13A - 48Y6C FB bundle J4860D: 10.10.0002 interface groups (groups of 4 ports) to enable
Series JL745A, JL746A the use of 1G or 10G transceivers / DACs in
R8P14A - 48Y6C BF bundle the SFP28 ports (Set the speed to 25g for the
(TAA): 10.10.0002
default). See the Hardware Guides for details.
1G optics at the opposite end of the link must
NOT enable auto negotiation and operate in
full duplex mode.

© Copyright 2024 Hewlett Packard Enterprise Development. All Rights Reserved.

https://www.arubanetworks.com/techdocs/Switches/xcvrs/xcvr_guide/Content/Chp_sfp/gig-sfp-mod-spe-com.htm 13/13