Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re
welcome to visit ASRock’s website at http://www.asrock.com; or you may contact
your dealer for further information. For technical questions, please submit a
support request form at https://event.asrock.com/tsd.asp

ASRock Incorporation
e-mail: [email protected]

ASRock EUROPE B.V.

e-mail: [email protected]

ASRock America, Inc.

e-mail: [email protected]

Scan the QR code to view more manuals and documents.

Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 7

1.4 I/O Panel 9

1.5 Block Diagram 11

1.6 802.11be Wi-Fi 7 Module and ASRock WiFi 2.4/5/6 GHz

Antenna 12

Chapter 2 Installation 13
2.1 Installing the CPU 14

2.2 Installing the CPU Fan and Heatsink 17

2.3 Installing Memory Modules (DIMM) 26

2.4 Connecting the Front Panel Header 28

2.5 Installing the Motherboard 29

2.6 Installing SATA Drives 30

2.7 Installing a Graphics Card 32

2.8 Connecting Peripheral Devices 34

2.9 Connecting the Power Connectors 35

2.10 Power On 36

2.11 Jumpers Setup 37

2.12 Onboard Headers and Connectors 38

2.13 Smart Switches 51

2.14 Post Status Checker 53

2.15 M.2 SSD Installation Guide (M2_1) 54

2.16 M.2 SSD Installation Guide (M2_2) 57

2.17 M.2 SSD Installation Guide (M2_3) 60

 X870 Riptide WiFi

Chapter 1 Introduction
Thank you for purchasing ASRock X870 Riptide WiFi motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.

1.1 Package Contents

• ASRock X870 Riptide WiFi Motherboard (ATX Form Factor)
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x ASRock WiFi 2.4/5/6 GHz Antenna (Optional)
• 1 x ARGB Splitter Cable (Optional)
• 1 x Thermistor Cable (Optional)

1
 1.2 Specifications

Platform • ATX Form Factor

• 8 Layer PCB

TM
CPU • Supports AMD Socket AM5 Ryzen 9000, 8000 and 7000
Series Processors*
* The availability of expansion slots may vary by CPU. Please
refer to PCIe/M.2 Bandwidth Table for details. (http://www.
asrock.com/)

Chipset • AMD X870

Memory • Dual Channel DDR5 Memory Technology

• 4 x DDR5 DIMM Slots
• Supports DDR5 ECC/non-ECC, un-buffered memory up to
8000+(OC)*
• Max. capacity of system memory: 256GB
• Supports Extreme Memory Profile (XMP) and EXTended
Profiles for Overclocking (EXPO) memory modules
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)

Expansion CPU:
Slot • 1 x PCIe 5.0 x16 Slot (PCIE1), supports x16 mode*
• 1 x PCIe 4.0 x16 Slot (PCIE2), supports x4 mode*
Chipset:
• 1 x Vertical M.2 Socket (Key E), supports type 2230 WiFi/
BT PCIe WiFi module

* PCIE1 will run at Gen5x16 with 9000 and 7000 series

processors, Gen4x8 with 8000 (Phoenix 1) series processors and
Gen4x4 with 8000 (Phoenix 2) series processors.
* If M2_3 is occupied, PCIE2 will be disabled.
* Supports NVMe SSD as boot disks
TM
• Supports AMD CrossFire
• 15μ Gold Contact in VGA PCIe Slot (PCIE1)

2
 X870 Riptide WiFi

TM
Graphics • Integrated AMD RDNA graphics (Actual support may
vary by CPU)
• 1 x HDMI 2.1 TMDS/FRL 8G Compatible, supports HDR,
HDCP 2.3 and max. resolution up to 4K 120Hz
• 2 x USB4, support HDCP 2.3 and max. resolution up to 8K
30Hz*
* Only the CPU's embedded graphics can be displayed through
USB4 ports. If you want to display to a Type-C monitor,
please use AM5 RyzenTM 9000, 8000 and 7000 processors with
embedded graphics.

Audio • 7.1 CH HD Audio with Content Protection (Realtek

ALC4082 Audio Codec)
• Individual PCB Layers for R/L Audio Channel
• Direct Drive Technology on Front headphone port (Supports
up to 600 Ohm headsets)
• Nahimic Audio

LAN • 2.5 Gigabit LAN 10/100/1000/2500 Mb/s

• Killer® E3100G
• Supports Killer LAN Software

Wireless • 802.11be 2x2 Wi-Fi 7 Module

LAN • Supports IEEE 802.11a/b/g/n/ac/ax/axe/be
• Supports 2.4GHz/5GHz/6GHz* frequency band
• Supports 160MHz channel bandwidth with 6GHz* frequen-
cy band
* Wi-Fi 7 (6GHz band) will be supported by Microsoft® Win-
dows® 11. The availability will depend on the different regula-
tion status of each country and region. It will be activated (for
supported countries) through Windows Update and software
updates once available.
• 1 antenna to support 2 (Transmit) x 2 (Receive) diversity
technology
• Supports Bluetooth 5.4
• Supports MU-MIMO

3
 USB CPU:
• 2 x USB4 Type-C (Rear)
• 1 x USB 3.2 Gen2 Type-A (Rear (USB32_3))
• 1 x USB 3.2 Gen1 Type-A (Rear (USB32_1))
Chipset:
• 1 x USB 3.2 Gen2x2 Type-C (Front)
• 1 x USB 3.2 Gen2 Type-A (Rear (USB32_4))
• 6 x USB 3.2 Gen1 Type-A (2 Rear (USB32_2 and USB32_5),
4 Front)
• 8 x USB 2.0 (4 Rear, 4 Front)
* All USB ports support ESD Protection

Rear Panel • 2 x Antenna Ports

I/O • 1 x HDMI Port
• 1 x Optical SPDIF Out Port
• 2 x USB4 Type-C Ports (40 Gb/s)*
• 3 x USB 3.2 Gen1 Type-A Ports (USB32_12 are Lightning
Gaming Ports.)
• 2 x USB 3.2 Gen2 Type-A Ports (10 Gb/s) (USB32_34
supports Ultra USB Power.)
• 4 x USB 2.0 Ports
• 1 x RJ-45 LAN Port
• 1 x BIOS Flashback Button
• 1 x Line Out Jack (Gold Audio Jack)
• 1 x Microphone Input Jack (Gold Audio Jack)
* Supports USB PD 3.0 up to 5V@3A (15W) charging

Storage CPU:
• 1 x Blazing M.2 Socket (M2_1, Key M), supports type 2280
PCIe Gen5x4 (128 Gb/s) mode*
Chipset:
• 1 x Hyper M.2 Socket (M2_2, Key M), supports type
2230/2260/2280 PCIe Gen4x4 (64 Gb/s) mode*
• 1 x Hyper M.2 Socket (M2_3, Key M), supports type
2260/2280 PCIe Gen4x4 (64 Gb/s) mode*
ASMedia ASM1061:
• 4 x SATA3 6.0 Gb/s Connectors

* Supports NVMe SSD as boot disks

4
 X870 Riptide WiFi

* M2_1 is the first priority for M.2 installation.

* M2_1 will run at Gen5x4 with 9000 and 7000 series proces-
sors and Gen4x4 with 8000 (Phoenix 1 and Phoenix 2) series
processors.
* If M2_3 is occupied, PCIE2 will be disabled.

RAID • Supports RAID 0, RAID 1 and RAID 10 for M.2 NVMe

storage devices*
* Requires additional M.2 NVMe expansion cards to support
RAID 10

Connector • 1 x Thermistor Cable Header

• 1 x Power LED and Speaker Header
• 1 x RGB LED Header*
• 3 x Addressable LED Headers**
• 2 x CPU Fan Connectors (4-pin) (Smart Fan Speed Con-
trol)***
• 3 x Chassis Fan Connectors (4-pin) (Smart Fan Speed Con-
trol)***
• 1 x AIO Pump Fan Connector (4-pin) (Smart Fan Speed
Control)***
• 1 x 24 pin ATX Power Connector (Hi-Density Power Con-
nector)
• 2 x 8 pin 12V Power Connectors (Hi-Density Power Con-
nector)
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
• 1 x Front Panel Type C USB 3.2 Gen2x2 Header (20 Gb/s)
* Supports in total up to 12V/3A, 36W LED Strip
** Support in total up to 5V/3A, 15W LED Strip
*** CPU_FAN1 supports the fan power up to 1A (12W).
*** CPU_FAN2, CHA_FAN1~3 and AIO_PUMP support the
fan power up to 3A (36W).
*** CPU_FAN2, CHA_FAN1~3 and AIO_PUMP can auto
detect if 3-pin or 4-pin fan is in use.

5
 BIOS • AMI UEFI Legal BIOS with GUI support
Feature

OS • Microsoft® Windows® 10 64-bit / 11 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.

6
 X870 Riptide WiFi

1.3 Motherboard Layout

7
 No. Description
1 ATX 12V Power Connector (ATX12V1)
2 ATX 12V Power Connector (ATX12V2)
3 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1)
4 CPU Fan Connector (CPU_FAN1)
5 CPU Fan Connector (CPU_FAN2)
6 AIO Pump Fan Connector (AIO_PUMP)
7 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2)
8 Post Status Checker (PSC)
9 Addressable LED Header (ADDR_LED3)
10 Addressable LED Header (ADDR_LED2)
11 ATX Power Connector (ATXPWR1)
12 USB 3.2 Gen1 Header (USB32_8_9)
13 Front Panel Type C USB 3.2 Gen2x2 Header (USB32_TC1)
14 SPI TPM Header (SPI_TPM_J1)
15 USB 3.2 Gen1 Header (USB32_6_7)
16 SATA3 Connectors (SATA3_A3)(Upper), (SATA3_A4)(Lower)
17 SATA3 Connectors (SATA3_A1)(Upper), (SATA3_A2)(Lower)
18 System Panel Header (PANEL1)
19 Power LED and Speaker Header (SPK_PLED1)
20 USB 2.0 Header (USB_7_8)
21 USB 2.0 Header (USB_5_6)
22 Clear CMOS Jumper (CLRCMOS1)
23 Chassis Fan Connector (CHA_FAN1)
24 Chassis Fan Connector (CHA_FAN2)
25 Addressable LED Header (ADDR_LED1)
26 RGB LED Header (RGB_LED1)
27 Thermistor Cable Header (T_SENSOR1)
28 Front Panel Audio Header (HD_AUDIO1)
29 Chassis Fan Connector (CHA_FAN3)

8
 X870 Riptide WiFi

1.4 I/O Panel

3
1 2 4

13 12 11 10 9 8 6 5
7

No. Description No. Description

1 USB 3.2 Gen2 Ports (USB32_34)* 8 USB4 Type-C Port (USB4_TB1)
2 2.5G LAN RJ-45 Port** 9 USB 3.2 Gen1 Ports (USB32_12)****
3 Microphone Input Jack*** 10 USB 2.0 Ports (USB_1234)
4 Line Out Jack*** 11 BIOS Flashback Button
5 Optical SPDIF Out Port 12 Antenna Ports
6 USB 3.2 Gen1 Port (USB32_5) 13 HDMI Port
7 USB4 Type-C Port (USB4_TB2)

* USB32_34 support Ultra USB Power.

** There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps/1Gbps connection
On Link Green 2.5Gbps connection

9
 *** Function of the Audio Ports in 2, 4, 5.1 or 7.1-channel Configuration:

Channel Port Function

Line Out Jack
2ch Front speaker out
(Rear Panel)
Pink-Mic
4ch Rear speaker out
(Front Panel)
Microphone Input Jack
5.1ch Central/Subwoofer speaker out
(Rear Panel)
Lime-Headphone
7.1ch Side Speaker out
(Front Panel)

**** USB32_12 are Lightning Gaming Ports.

10
 DDR5 Slot x2 Channel A Gen5 x16 PCIE1 Gen5 x16 (X16 slot)

DDR5 Slot x2 Channel B Gen5 x4 M.2_1(PCIe Gen5 x4)

HDMI Port DP0 Gen4 x4

AMD AM5 ASMedia USB4 host controller
Processor DP1
(ASM4242) Rear USB4 Type C *2 port
LGA1718 DP2
1.5 Block Diagram

Flash ROM 256Mb SPI 10Gb/s ReDriver Rear USB 3.2 Gen2 Type A *1 port

SIO NCT6686D eSPI

5Gb/s Rear USB 3.2 Gen1 Type A *1 port

AIO_PUMP NCT3961S
CHA FAN3/WP NCT3961S
CHA FAN2/WP NCT3961S
CHA FAN1/WP NCT3961S
CPU FAN2/WP NCT3961S PCIe Gen4 x4 BUS
CPU FAN1

Front USB 3.2 Gen2x2 Type C *1 port ReDriver 20Gb/s

Gen4 x4 M.2_2(PCIe Gen4 x4)

Rear USB 3.2 Gen2 Type A *1 port ReDriver 10Gb/s

M.2_3(PCIe Gen4 x4)
Gen3 x4 Quick SWITCH
PCIE2 Gen4 x4 (X16 slot)
Rear USB 3.2 Gen1 Type A *2 port 5Gb/s

ASM1074 5Gb/s AMD PROM21

Front USB 3.2 Gen1 *4 port
USB3.0 HUB Chipset Gen3 x1 Killer E3100 2.5G LAN

Front USB 2.0 *4 port GL852 480Mb/s

USB2.0 HUB Gen3 x1 WiFi 6E RZ717 ( PCIE )

Gen3 x1 ASM1061
Audio Codec ALC 4082 (2+1 jack) 480Mb/s SATA contoller SATA 2 port

Gen3 x1 ASM1061
Flashback SATA contoller SATA 2 port
Rear USB 2.0 *4 port 480Mb/s
1 port

11
X870 Riptide WiFi
 1.6 802.11be Wi-Fi 7 Module and ASRock WiFi 2.4/5/6 GHz
Antenna
802.11be Wi-Fi 7 + BT Module
This motherboard comes with an exclusive 802.11 a/b/g/n/ac/ax/axe/be Wi-Fi 7 + BT
v5.4 module that offers support for 802.11 a/b/g/n/ac/ax/axe/be Wi-Fi 7 connectivity
standards and Bluetooth v5.4. Wi-Fi 7 + BT module is an easy-to-use wireless local
area network (WLAN) adapter to support Wi-Fi 7 + BT. Bluetooth v5.4 standard
features Smart Ready technology that adds a whole new class of functionality into the
mobile devices.

* The transmission speed may vary according to the environment.

* Wi-Fi 7 (6GHz band) will be supported by Microsoft® Windows® 11. The availability
will depend on the different regulation status of each country and region. It will be
activated (for supported countries) through Windows Update and software updates
once available.

12
 X870 Riptide WiFi

Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle the
components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

13
 2.1 Installing the CPU

1. Before you insert the 1718-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

Tutorial Video

Turn your CPU to the correct orientation before opening

the CPU socket cover.

14
 X870 Riptide WiFi

1 2

3 4

Carefully place the CPU in as flat as

possible. Do not drop it.

15
 5 6

Make sure the CPU is aligned with the

socket before locking it into place.

Make sure the black cover plate

is always in place until it pops off
when closing the socket lever.

Please save the cover if the processor is removed. The cover must be placed if you wish
to return the motherboard for after service.

16
 X870 Riptide WiFi

2.2 Installing the CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Make sure that the
CPU and the heatsink are securely fastened and in good contact with each other.

Please turn off the power or remove the power cord before changing a CPU or heatsink.

Installing the CPU Cooler (Type 1)

17
18
4
3

CP
U_
FA
N1
 X870 Riptide WiFi

Installing the CPU Cooler (Type 2)

19
20
4
3

CP
U_
FA
N1
 X870 Riptide WiFi

N 1
FA
U_
CP
D1

+12V RG
B_LE

*The illustrations shown here are for reference purposes only and may not exactly match
the model you purchase.

21
 Installing the CPU Cooler (Type 3)

22
 X870 Riptide WiFi

23
24
5

CP
U_
FA
N1
 X870 Riptide WiFi

N1
_FA
U
CP
D1

+12V
B_LE
RG

or U_
CP
FA
N1

D1
B_LE
RG

2
B_1_
US

Please note that only one cable should be used at a time in this step.
If you select RGB_LED1, please install ASRock utility "ASRock Polychrome SYNC".
If you select USB connector, please install AMD utility "SR3 Settings Software".

*The illustrations shown here are for reference purposes only and may not exactly match
the model you purchase.

25
 2.3 Installing Memory Modules (DIMM)

This motherboard provides four 288-pin DDR5 (Double Data Rate 5) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR5 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 , DDR3 or DDR4 memory module into a
DDR5 slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.

Recommended Memory Configuration

1 DIMM
A1 A2 B1 B2
V

2 DIMMs
A1 A2 B1 B2
V V

4 DIMMs
A1 A2 B1 B2
V V V V

26
 X870 Riptide WiFi

27
 2.4 Connecting the Front Panel Header

:
6
(5
: ('
32 '
/
'
+
/( 

6:
('

7
'

6(
/
(5

5(
:

(5
32

:
32

2
RESET SW
HDD LED

3$1(/

System Panel Header Front Panel Wires

10 9

Power SW (-) RESET SW (+)

B D
Power SW (+) RESET SW (-)

Power LED (-) HDD LED (-)

A C
Power LED (+) HDD LED (+) A B C D
2 1
PANEL1

28
 X870 Riptide WiFi

2.5 Installing the Motherboard

29
 2.6 Installing SATA Drives

Optical Drive

SATA Drive

SATA Data Cable

30
 X870 Riptide WiFi

SATA Power Connector

SATA Data Connector

31
 2.7 Installing a Graphics Card

2
1

CLICK! 4

32
 X870 Riptide WiFi

Expansion Slots (PCIe Slots)

There are 2 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 5.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE2 (PCIe 4.0 x16 slot) is used for PCIe x4 lane width graphics cards.

* PCIE1 will run at Gen5x16 with 9000 and 7000 series processors, Gen4x8 with
8000 (Phoenix 1) series processors and Gen4x4 with 8000 (Phoenix 2) series
processors.

* If M2_3 is occupied, PCIE2 will be disabled.

PCIe Slot Configurations

PCIE1 PCIE2

Single Graphics Card Gen5x16 N/A

Two Graphics Cards in

Gen5x16 Gen4x4
CrossFireTM Mode

33
 2.8 Connecting Peripheral Devices

34
 X870 Riptide WiFi

2.9 Connecting the Power Connectors

$7;9 $7;3:5

35
 2.10 Power On

1 3

36
 X870 Riptide WiFi

2.11 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper

(CLRCMOS1) (see p.7, No. 22)
CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please
turn off the computer and unplug the power cord, then use a jumper cap to short
the pins on CLRCMOS1 for 3 seconds. Please remember to remove the jumper
cap after clearing the CMOS. If you need to clear the CMOS when you just finish
updating the BIOS, you must boot up the system first, and then shut it down
before you do the clear-CMOS action.

CLRCMOS1

2-pin Jumper

Short: Clear CMOS

Open: Default

37
 2.12 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.

System Panel Header

(9-pin PANEL1) (see p.7, No. 18)
Connect the power button, reset button and system status indicator on the chassis
to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.

PANEL1
PLED+
PLED-
PWRBTN#
GND

1
GND
RESET#
GND
HDLED-
HDLED+

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way
to turn off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
38
 X870 Riptide WiFi

Power LED and Speaker Header

(7-pin SPK_PLED1) (see p.7, No. 19)
Please connect the chassis power LED and the chassis speaker to this header.

SPK_PLED1

SPEAKER
DUMMY
DUMMY
+5V

PLED+
PLED+
PLED-

Serial ATA3 Connectors

Right Angle:
(SATA3_A1) (see p.7, No. 17) (Upper)
(SATA3_A2) (see p.7, No. 17) (Lower)
(SATA3_A3) (see p.7, No. 16) (Upper)
(SATA3_A4) (see p.7, No. 16) (Lower)
These four SATA3 connectors support SATA data cables for internal storage
devices with up to 6.0 Gb/s data transfer rate.
SATA3_A4
SATA3_A3

SATA3_A2
SATA3_A1

39
 USB 2.0 Headers
(9-pin USB_5_6) (see p.7, No. 21)
(9-pin USB_7_8) (see p.7, No. 20)
There are two headers on this motherboard. Each USB 2.0 header can support
two ports.
USB_5_6
USB_PWR
-B
+B
GND
DUMMY

1
GND
+A
-A
USB_PWR

USB_7_8
USB_PWR
-B
+B
GND
DUMMY

1
GND
+A
-A
USB_PWR

USB 3.2 Gen1 Headers

(19-pin USB32_6_7) (see p.7, No. 15)
(19-pin USB32_8_9) (see p.7, No. 12)
There are two headers on this motherboard. Each USB 3.2 Gen1 header can
support two ports.
USB32_8_9
Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1

USB32_6_7
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND IntA_PA_SSTX+
IntA_PB_SSTX+ IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vbus
Vbus

40
 X870 Riptide WiFi

Front Panel Type C USB 3.2 Gen2x2 Header

(20-pin USB32_TC1) (see p.7, No. 13)
There is one Front Panel Type C USB 3.2 Gen2x2 Header on this motherboard.
This header is used for connecting a USB 3.2 Gen2x2 module for additional USB 3.2
Gen2x2 ports.

USB32_TC1

USB Type-C Cable

Front Panel Audio Header

(9-pin HD_AUDIO1) (see p.7, No. 28)
This header is for connecting audio devices to the front audio panel.

HD_AUDIO1
GND
PRESENCE#
MIC_RET
OUT_RET

1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

High Definition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.

41
 Chassis Fan Connectors
(4-pin CHA_FAN1) (see p.7, No. 23)
(4-pin CHA_FAN2) (see p.7, No. 24)
(4-pin CHA_FAN3) (see p.7, No. 29)
This header allows you to connect Case or Radiator fan. If you plan to connect a
3-pin fan, please connect it to Pin 1-3.

CHA_FAN3
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

CHA_FAN1
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL
CHA_FAN2
GND
FAN_VOLTAGE 1 2 3 4
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

42
 X870 Riptide WiFi

CPU Fan Connector

(4-pin CPU_FAN1) (see p.7, No. 4)
This header allows you to connect CPU fan. If you plan to connect a 3-pin fan,
please connect it to Pin 1-3.

CPU_FAN1
4 3 2 1

GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL

CPU Fan Connector

(4-pin CPU_FAN2) (see p.7, No. 5)
This header allows you to connect CPU fan or Water Pump. If you plan to connect
a 3-pin fan, please connect it to Pin 1-3.

CPU_FAN2
4 3 2 1

GND
FAN_VOLTAGE
CPU_FAN_SPEED
FAN_SPEED_CONTROL

43
 AIO Pump Fan Connector
(4-pin AIO_PUMP) (see p.7, No. 6)
This header allows you to connect AIO (All-in-One) pump or fan. If you plan to
connect a 3-pin AIO cooler fan, please connect it to Pin 1-3.

AIO_PUMP
4 3 2 1

GND
FAN_VOLTAGE
AIO_PUMP_SPEED
FAN_SPEED_CONTROL

44
 X870 Riptide WiFi

ATX Power Connector

(24-pin ATXPWR1) (see p.7, No. 11)
This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX
power supply, please plug it along Pin 1 and Pin 13.

ATXPWR1
12 24

1 13

ATX 12V Power Connectors

(8-pin ATX12V1) (see p.7, No. 1)
(8-pin ATX12V2) (see p.7, No. 2)
This motherboard provides two 8-pin ATX 12V power connectors. To use a 4-pin
ATX power supply, please plug it along Pin 1 and Pin 5.
*Connecting an ATX 12V 8-pin cable to ATX12V2 is optional.
*Warning: Please make sure that the power cable connected is for the CPU and
not the graphics card. Do not plug the PCIe power cable to this
connector.
ATX12V2
8 5

4 1

ATX12V1
8 5

4 1

45
 SPI TPM Header
(13-pin SPI_TPM_J1) (see p.7, No. 14)
This connector supports SPI Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system also
helps enhance network security, protects digital identities, and ensures platform
integrity.

SPI_TPM_J1
SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ

SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2

46
 X870 Riptide WiFi

Thermistor Cable Header

(2-pin T_SENSOR1) (see p.7, No. 27)
The Thermistor Cable Headers are used to connect thermistor cables to monitor the
temperature of the critical components. Plug the thermistor cables that come with the
package to these headers, and then attach the sensor ends to the components to detect
their temperature.

T_SENSOR1
1
GND
SENSOR IN

Connect your Thermistor Cables to the

Thermistor Cable Header (T_SENSOR1) on
the motherboard.

R
SO
EN
T_S

47
 RGB LED Header
(4-pin RGB_LED1) (see p.7, No. 26)
This RGB header is used to connect RGB LED extension cable which allow users to
choose from various LED lighting effects.
Caution: Never install the RGB LED cable in the wrong orientation; otherwise, the
cable may be damaged.

RGB_LED1
1
+12V G R B

Connect your RGB LED strip to the RGB

LED Header (RGB_LED1) on the mother-
board.

1 B
R
G
12V

1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.

1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.

48
 X870 Riptide WiFi

Addressable LED Headers

(3-pin ADDR_LED1) (see p.7, No. 25)
(3-pin ADDR_LED2) (see p.7, No. 10)
(3-pin ADDR_LED3) (see p.7, No. 9)
These headers are used to connect Addressable LED extension cables which allow users
to choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
ADDR_LED3

ADDR_LED2

ADDR_LED1
1

GND
DO_ADDR
VOUT

Connect your Addressable RGB LED strips

to the Addressable LED Headers (ADDR_
LED1 / ADDR_LED2 / ADDR_LED3) on
the motherboard.

49
 1. Never install the Addressable LED cable in the wrong orientation; otherwise, the
cable may be damaged.
2. Before installing or removing your Addressable LED cable, please power off your
system and unplug the power cord from the power supply. Failure to do so may
cause damages to motherboard components.

1. Please note that the Addressable LED strips do not come with the package.
2. The Addressable LED header supports WS2812B addressable RGB LED strip (5V/
Data/GND), with a maximum power rating of 3A (5V) and length within 2 meters.

The ARGB Splitter Cable that comes with the package allows you to extend and connect
various addressable RGB LED strips or devices through a single 3-pin Addressable
LED Header on the motherboard.
D
D
D

50
 X870 Riptide WiFi

2.13 Smart Switches

The motherboard has one smart switch: BIOS Flashback Button, allowing users to
flash the BIOS.

BIOS Flashback Button

(BIOS_FB1) (see p.9, No. 11)
BIOS Flashback Button allows users to flash the BIOS.

BIOS_FB1

USB BIOS Flashback port

51
 ASRock BIOS Flashback feature allows you to update BIOS without powering on the system,
even without CPU.

Before using the BIOS Flashback function, please suspend BitLocker and any encryp-
tion or security relying on the TPM. Make sure that you have already stored and
backup-ed the recovery key. If the recovery key is missing while encryption is active,
the data will stay encrypted and the system will not boot into the operating system. It
is recommended to disable fTPM before updating the BIOS. Otherwise an unpredict-
able failure may occur.

To use the USB BIOS Flashback function, Please follow the steps below.
1. Download the latest BIOS file from ASRock's website : http://www.asrock.com.
2. Copy the BIOS file to your USB flash drive. Please make sure the file system of
your USB flash drive must be FAT32.
3. Extract BIOS file from the zip file.
4. Rename the file to “creative.rom” and save it to the root directory of X: USB flash drive.
5. Plug the 24 pin power connector to the motherboard. Then turn on the power supply's AC
switch.
*There is no need to power on the system.
6. Then plug your USB drive to the USB BIOS Flashback port.
7. Press the BIOS Flashback Switch for about three seconds. Then the LED starts to blink.
8. Wait until the LED stops blinking, indicating that BIOS flashing has been completed.
*If the LED light turns solid green, this means that the BIOS Flashback is not
operating properly. Please make sure that you plug the USB drive to the USB BIOS Flashback
port.
**If the LED does not light up at all then please disconnect power from the system and
remove/disconnect the CMOS battery from the motherboard for several minutes. Reconnect
power and battery and try again.

52
 X870 Riptide WiFi

2.14 Post Status Checker

Post Status Checker (PSC) diagnoses the computer when users power on the machine.
The LEDs light up to show what component is running into an issue. They emit red, yel-
low, white and yellow-green lights to indicate, respectively, the CPU, memory, VGA and
storage are not detected or fail. They will remain lit until the issue is fixed. The lights go
off if the four mentioned above are functioning normally.

Component LED Indicator Status

CPU Solid Red indicates CPU is dysfunctional.
DRAM Solid Yellow indicates DRAM is dysfunctional.
VGA Solid White indicates GPU is dysfunctional.
BOOT Solid Yellow-Green indicates boot device is dysfunctional.

It is normal for the DRAM status LED to blink during memory training. This indi-
cates the system is working properly.

Tutorial Video

53
 2.15 M.2 SSD Installation Guide (M2_1)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Blazing M.2 Socket (M2_1, Key M) supports type 2280 PCIe Gen5x4 (128
Gb/s) mode.
* M2_1 is the first priority for M.2 installation.
* M2_1 will run at Gen5x4 with 9000 and 7000 series processors and Gen4x4 with 8000
(Phoenix 1 and Phoenix 2) series processors.

Installing the M.2 SSD

Step 1

Prepare a M.2 SSD.

Step 2

Depending on the PCB type and

length of your M.2 SSD, find the
corresponding nut location to be
used.

No. 1
Nut Location A
PCB Length 8cm
Module Type Type 2280

54
 X870 Riptide WiFi

Step 3

Push and hold the button on the

C
M.2 heatsink (A). Then lift up the
heatsink (B) and move it in the
direction shown (C).
A *Please remove the protective films
on the bottom side of the M.2
B heatsink before you install a
M.2 SSD.

Step 4

Align and gently insert the M.2 SSD

into the M.2 slot. Please be aware
that the M.2 SSD only fits in one
orientation.

20o

Step 5

Ensure that the notch at the end of

the M.2 SSD aligns with the nut.
Then secure the M.2 SSD by turning
the nut lock clockwise to its locked
position.

55
 Step 6

Hook the tab of the M.2 heatsink

back onto the standoff.

Step 7

Press the M.2 heatsink down into

place.
*Be sure not to press down the
button on the M.2 heatsink.

Step 8

Complete.

For the latest updates of M.2 SSD support list, please visit our website for details: http://
www.asrock.com

56
 X870 Riptide WiFi

2.16 M.2 SSD Installation Guide (M2_2)

The M.2 is a small size and versatile card edge connector that aims to replace mPCIe
and mSATA. The Hyper M.2 Socket (M2_2, Key M) supports type 2230/2260/2280 PCIe
Gen4x4 (64 Gb/s) mode.

Installing the M.2 SSD

Step 1

Prepare a M.2 SSD.

3 Step 2
2
Depending on the PCB type and
length of your M.2 SSD, find the
corresponding nut location to be
used.
1

C B A

No. 1 2 3
Nut Location A B C
PCB Length 3cm 6cm 8cm
Module Type Type 2230 Type 2260 Type 2280

57
1 Step 3

2 Before installing a M.2 SSD, please

loosen the screws to remove the M.2
heatsink.
*Please remove the protective films
1
on the bottom side of the M.2
heatsink before you install a M.2
SSD.

Step 4

Use a screwdriver to remove the

standoff.
Skip Step 4 if your M.2 SSD is
Type 2280.

C B A

Step 5

Peel off the yellow protective film on

the nut to be used. Tighten the
standoff into the desired nut
location on the motherboard with a
screwdriver.
Skip Step 5 if your M.2 SSD is
C B A
Type 2280.

58
 X870 Riptide WiFi

Step 6

Align and gently insert the M.2 SSD

into the M.2 slot. Please be aware
that the M.2 SSD only fits in one
orientation.

20o

Step 7

Ensure that the notch at the end of

the M.2 SSD aligns with the nut.
Then secure the M.2 SSD by turning
the nut lock clockwise to its locked
position.

2 Step 8

1 Tighten the screws with a

screwdriver to secure the M.2
heatsink into place. Please do not
2 overtighten the screw as this might
damage the M.2 SSD and M.2
heatsink.

For the latest updates of M.2 SSD support list, please visit our website for details: http://
www.asrock.com 59
 2.17 M.2 SSD Installation Guide (M2_3)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Hyper M.2 Socket (M2_3, Key M) supports type 2260/2280 PCIe Gen4x4 (64
Gb/s) mode.
* If M2_3 is occupied, PCIE2 will be disabled.

Installing the M.2 SSD

Step 1

Prepare a M.2 SSD.

Step 2

Depending on the PCB type and

length of your M.2 SSD, find the
corresponding nut location to be
used.

No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280

60
 X870 Riptide WiFi

1 Step 3

2 Before installing a M.2 SSD, please

loosen the screws to remove the M.2
heatsink.
*Please remove the protective films
1
on the bottom side of the M.2
heatsink before you install a M.2
SSD.

Step 4

Use a screwdriver to remove the

standoff.
Skip Step 4 if your M.2 SSD is
Type 2280.

B A

Step 5

Peel off the yellow protective film on

the nut to be used. Tighten the
standoff into the desired nut
location on the motherboard with a
screwdriver.
Skip Step 5 if your M.2 SSD is
B A
Type 2280.

61
 Step 6

Align and gently insert the M.2 SSD

into the M.2 slot. Please be aware
that the M.2 SSD only fits in one
orientation.

20o

Step 7

Ensure that the notch at the end of

the M.2 SSD aligns with the nut.
Then secure the M.2 SSD by turning
the nut lock clockwise to its locked
position.

2 Step 8

1 Tighten the screws with a

screwdriver to secure the M.2
heatsink into place. Please do not
2
overtighten the screw as this might
damage the M.2 SSD and M.2
heatsink.

For the latest updates of M.2 SSD support list, please visit our website for details: http://
62 www.asrock.com
Version 1.0
Published August 2024

Copyright©2024 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
To the extent permitted by law, with respect to the contents of this documentation,
ASRock does not provide warranty of any kind, either expressed or implied,
including but not limited to the implied warranties or conditions of
merchantability or fitness for a particular purpose. In no event shall ASRock,
its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss
of business, loss of data, interruption of business and the like), even if ASRock has
been advised of the possibility of such damages arising from any defect or error in
the documentation or product.
 FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Button Battery Safety Notice

WARNING
• INGESTION HAZARD: This product contains a button cell or
coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal
Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN
• Seek immediate medical attention if a battery is suspected to
be swallowed or inserted inside any part of the body.
- Remove and immediately recycle or dispose of used batteries according to local
regulations and keep away from children. Do NOT dispose of batteries in household
trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- Battery type: CR2032
- Battery voltage: 3V
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above (manufacturer's specified
temperature rating) or incinerate. Doing so may result in injury due to venting, leakage
or explosion resulting in chemical burns.
- This product contains an irreplaceable battery.
- This icon indicates that a swallowed button battery can cause serious injury or death. 
Please keep batteries out of sight or reach of children.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

CALIFORNIA, USA ONLY

WARNING: Cancer and Reproductive Harm

www.P65Warnings.ca.gov

CE Conformity

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with
global environmental regulations. In addition, ASRock disclose the relevant information
based on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.

UKCA Conformity

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrock.com
Consumer Limited Warranty - Australia
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)

WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.

Proper Disposal

DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

Class B ITE

Trademark Information
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
European Community Radio Equipment Directive Compliance
Statement
This device complies with directive 2014/53/EU issued by the Commision of the
European Community. This equipment complies with EU radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Operations in the 5.15-5.35/6GHz band are restricted to indoor usage only.

Radio Frequency Bands and Maximum Power Levels

• Features : Wi-Fi 6E, BT, Wi-Fi 7
• Frequency Range : 2.4 GHz: 2400-2485MHz; 5 GHz: 5150-5350MHz, 5470-5725MHz,
5725-5850MHz; 6 GHz: 5955-6415MHz
• Max Power Level : 2.4 GHz: 20dBm; 5 GHz: 23dBm; 6 GHz: 23dBm

Compliance Statement of Innovation, Science and Economic

Development Canada (ISED)
This device complies with with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation
of the device. Operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems. CAN ICES-003(B)/NMB-003(B)

NCC 無線設備警告聲明
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合
法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法
通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。
BSMI 限用物質及元素清單

限用物質及其化學符號
單元
鉛 (Pb) 鎘 (Cd) 汞 (Hg) 六價鉻 (Cr+6) 多溴聯苯 (PBB) 多溴聯苯醚 (PBDE)

電路板 O O O O O O

電子元件 - O O O O O

線材 - O O O O O

配件 - O O O O O

備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量

基準值。
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3.〝－〞係指該項限用物質為排除項目。
China RoHS
电子信息产品污染控制标示
依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子信息产
品污染控制标示要求」，电子信息产品应进行标示，藉以向消费者揭露产品中含有的
有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或对人身、财产造成严
重损害的期限。依上述规定，您可于本产品之印刷电路板上看见图一之标示。图一中
之数字为产品之环保使用期限。由此可知此主板之环保使用期限为 10 年。

图一

有毒有害物质或元素的名称及含量说明
若您欲了解此产品的有毒有害物质或元素的名称及含量说明，请参照以下表格及说明。

有害物质或元素
部件名称
铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE)
印刷电路板
X O O O O O
及电子组件
外部信号连
X O O O O O
接头及线材

以上表格依据 SJ/T 11364-2014 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
备注：此产品所标示之环保使用年限，系指在一般正常使用状况下。